VPIM Setup error - windows.exe
I download vipm - windows.exe from here: https://lumen.ni.com/nicif/us/evaltlktdigbus/content.xhtml
When I double-click vipm - windows.exe under Windows XP Pro, I get the following error, see jpg below:
is there a work around? I want to see the I2C of IPNet example
found this
https://decibel.NI.com/content/docs/doc-1151
Tags: NI Software
Similar Questions
-
Kobo e-Reader Setup error: "Windows cannot open KoboSetup.exe.part."
Original title: installation installation of Kobo e-Reader can't, get 'Windows CAN t Open KoboSetup.exe.part' what I can do
I have Windows XP Media 2001 Version, to install the installer for Kobo eReader. Download 'The window cannot open KoboSetup.exe.part' what I can do to install the eReader.
Irene
Hello
I suggest you to follow these steps and check if that helps:
Method 1:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/310353NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.
Method 2:
I suggest you run the fixit and see if it helps:
http://support.Microsoft.com/mats/Program_Install_and_UninstallIt will be useful.
-
Unable to Dassault catia v5 Setup error: CXINS.exe not found
Original title: CXINS.exe not found
My os is win7 32 bit, and I want to configure Dassault catia v5, when I click on setup, this error all?
CXINS not raise in C:\Users\...\AppData\Local\Temp\TempDSUnload what should I do: its very important for me to install this software
Hello
1. are you able to install other applications?
I suggest you to try the steps below and check if it helps.
Method 1: Try to put your computer in a clean boot state, and check to see if the same problem happens.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Follow these steps to reset the computer to start as usual:
(a) click on start toreduce this top that i, type msconfig.exe in the Start Search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click continue.
(b) under the general tab, click the Normal startup option, and then click OK.
(c) when you are prompted to restart the computer, click restart.
Method 2: Problems installing and uninstalling programs on Windowshttp://support.microsoft.com/kb/2438651 computers
Method 3: Clear the following temporary folder:
\AppData\Local\Temp C:\Users\Also enable the option Show hidden files
If the problem persists then I suggest you contact the software publisher.
Hope this information is useful.
-
Setup error Windows SP 1, 0xc0190036
I have a Compaq Presario C500 Windows XP and its been a while since I gave up trying to solve this problem, but if I remember correctly, in my opinion, I was installing Service Pack 1, when the computer is turned on, the screen is all black, then all these files begin to start loading and a counter begins to show to what extent the installation went. It stops immediately at:
!! 0xc0190036! 1475/94036 (regctrl.dll)
I don't have a windows disc or I can take this form. nor can I preform a system restore because I get an error saying
the memory could not be read.
Ive ran chkdsk and all is well.
From this moment all I see flashing is: «!» 0xc0190036! 1475/94063 (RegCtrl.dll).
Could someone please shed some light on this for me?
Be advised that I'm not this computer - repair - letter... If that makes sense...
I wonder where can I go to buy a Windows repair disc so I can solve this problem.
Or maybe a laptop for the book Dummies... (I'm kidding)
Thanks in advance and God bless...
Hello
The Compaq Presario C500 laptop comes pre-installed with the Windows Vista operating system, so I would suggest that you check the version of the operating system installed on the computer.
To check the version of the operating system installed on the computer see link below.
What version of the operating system Windows am I running?
See also:
If the operating system is Windows Vista then you can try the troubleshooting provided in the link below steps to fix the problem.
Error code on a black screen when you try to install a Service Pack in Windows Vista: "0xc0190036."
http://support.Microsoft.com/kb/975430
Note:
You need a Windows Vista CD/DVD to perform the troubleshooting steps, please contact your manufacturer for the CD/DVD of Windows Vista. -
NEITHER 488.2 - 3.1.1 Setup error (windows 7)
Hello
I tried to install the NI-488 driver. 2 for connecting a GPIB-USB-HS device on my computer.
All my test failed (run as administrator, disable my antivirus software,...).
The attached messages appeared.
Thanks in advance for your advice
I solved the problem. This is because there are several in my company administator rights.
I can't install software that modify the windows or other low level library.
-
I get an error, "CXINS.exe not found" when trying to install catia v5 Dassault.
Original title: 123
Unable to Dassault catia v5 Setup error: CXINS.exe not found in windows7
Hi dinesh_922,
Look here for the answers and troubleshooting tips.
http://www.catiatutorialcad.com/CATIA-help/
Depending on what version it is, my interpretation is that it is not backward compatible...
Good luck.
-
original title: MEDIA CENTER SETUP ERROR: Configuration settings for your region could not be determined
windows vista operating
Media Center worked then xbox 360 could no longer find videos. I can not run the Setup program for media center because of this message:
The configuration settings for your region could not be determined. Restart your computer to solve.
Things I've done:
restarted computer several times
run system restore
disabled the norton 360 firewall settings
has ran norton pc tune up
still can't media center to work Please HELP
Thank you
Hello
The problem may occur if the Windows Media Center components are not registered correctly.
I suggest to try the following steps to solve the problem.
The registry Windows Media Center components
=========================
1. click on start-> all programs-> Accessories, right-click command prompt and click Run as administrator.
2 type the following commands, press ENTER after each line.
REGSVR32 ATL. DLL
CD C:\WINDOWS\EHOME
EHSCHED /UNREGSERVER
EHSCHED/SERVICE
EHRECVR /UNREGSERVER
EHRECVR/SERVICE
EHREC. /UNREGSERVER EXE
EHREC. EXE/REGSERVER
EHMSAS. /UNREGSERVER EXE
EHMSAS. EXE/REGSERVER
We can open Windows Media Center now?
It will be useful.
-
Question? CS4 installed on your new PC (windows 10). Flash was not installed. Try to install CS5 update... close error: bridge.exe
Have you tried closing the bridge via the Task Manager?
Error: "Setup cannot continue until...". Adobe Bridge is closed. Adobe Creative Suite 5
-
In Windows Server 2003, I got the following error "svchost.exe - error on line 392."
Kindly help.
Hi Sophie,.
Your Windows Server 2003 issue is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
-
Installing Win AP Automation! 3.0 to accelerate VB Express 2010.
Warning message:
Update for MS Wim (KB971513) Setup error
Setup cannot update your Windows XP files because the language installed on your system is different from the update language.
My XP language is Norwegian. The rest of my 'stuff' MS is English.
- What you have already tried to solve the problem
Hello
I suggest you to check the article mentioned below.
Error message: Setup cannot update your Windows XP files
http://support.Microsoft.com/kb/555042
I suggest to select the language appropriate to the download page and check if you are able to install the update on the system or not. The update that you are trying to install on the system must be of the same language as installed.
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think. -
Windows 7 Ox80070017 Setup error
Good then I got an installation disc that made the files it contains and appear on my computer but I have a new problem now in which an error pops up saying that some files are not which is really unfortunate. The error code I get is: Ox80070017
original title: Windows 7 Setup errorHi Mohamed Kebbay,
Error code 0 x 80070017 means generally bad media. I would recommend that you download the file again, you may have corruption in ISO itself. So if possible, download the file again. After you download the new copy, try burning at a lower setting 4 X or 8 X speed. Once you burn the disc on a lower setting with the new ISO standard, and then see if you can install Windows 7.
See installation and reinstallation of Windows 7 for more information on installing Windows 7.
-
When I go into the control panel to change my settings for the mouse, I get the error "windows rundll.exe host has stopped working", therefore, you cannot change the mouse settings, how do I fix it? My mouse is out of control! :)
* original title - why windows will not host rundll.exe I would change my settings of the mouse? *
Hello
If you use 3rd party mouse drivers updated or reinstall those who, like Logitech, Microsoft
Wireless and so on.=================================================================
To solve the problems:
If your: Windows host process Rundll32 has stopped working
http://www.WinVistaClub.com/T40.htmlWhat is rundll32.exe and why it works?
http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/What is the suspicious Rundll32.exe process?
http://WindowsXP.MVPs.org/Rundll32.htm-----------------------------------------------------
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------
If no joy trying to determine what is the cause:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything - then right
Click on taskbar - task manager - take a look at stored by - Services - process -.
It's a quick reference (if you have a small box left - show for all users, then
Check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see who are loading is method 2 - using MSCONFIG then after a
a list of these here.
--------------------------------------------------------------------Tools that should help you:
Objects of process Explorer - free - find out what files, registry keys and other processes
have open, which DLLs they have loaded and more. This exceptionally effective utility will be
even show you who owns each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured so that it starts automatically when your
system boots and you log in. Autoruns is also the full list of registry and files
locations where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity
in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded
automatically when Windows starts. For each request, the following information
appears: product Type of startup (registry/Startup folder), Command - Line String,
Name, file Version, company name, location in the registry or the file system and more.
It allows you to easily disable or remove unwanted programs that run in your Windows
startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not.
The window Watcher says it all, every window created by all programs that are running, the statement
If the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/Hope these helps.
-
Error window opens "Winword.EXE - bad image", "C:\Windows\system32\bitsprx532.dll is not designed to run on Windows or it contains an error. Try fashion program at new etc. etc."
This happens at startup when programs open ie. audio and whenever I try to open a program, in this case MS Word. I click the OK button several times and he goes and allows me to work in the program.
Word:
http://answers.Microsoft.com/en-us/Office/default.aspx
Office at the above link forums
http://answers.Microsoft.com/en-us/Office/ee861096.aspx
Word Help Forums at the link above.
They will help you with your question Word when repost you in the Office Forums above.
See you soon.
Mick Murphy - Microsoft partner
-
Original title: Microsoft Fix it diagnosis
I ran Microsoft solve this diagnosis. He gave me a window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application. someone knows how to fix this?
Thank you
FOR EXAMPLE
Hello
Thanks for the reply. Until I'm your answer I have restored the laptop to the State of origin, with the possibility of restoring elements that had been added by the user. I'm trying to update windows, etc.. If I get errors or problems I will post them here. Thanks for your detailed response.
Eddie
-
Windows 7 Pro for Windows 10 Setup error
WindowsUpdate_C1900101""WindowsUpdate_dt000"
I try to install Windows 10. Running Windows 7 Pro
1. http://windows.microsoft.com/en-au/windows-10/upgrade-install-errors-windows-10
and/or
Maybe you are looking for
-
I used five inches TRONIX PSI displacement transducers to see movement on a beam. I have the output in volts, how can I convert it to inches. What type of calibration information is necessary to the transducer and how to use it to get my result in in
-
How to set group policy to display the computer name or the IP address for "send to."
original title: I need a group political templete windows 2003 get the ip address or computer name when you use the "send to" in a shared folder on a server I need a group policy windows 2003 templete to get the name of computer or ip address when yo
-
SD card reader driver for Windows 7
Laptop dv8025EA HP no. EK765EA product Just passed under operating system for above laptop XP to Windows 7. Windows 7 operating system is Dell Computers. One of the problemsI resulting, the SD card reader no longer works. The light blinks as normal,
-
maximize/minimize defaults to reduce at least want it or by default in maximixe.
The upper right corner has 3 boxes, in the middle there maximix / minimize. The reduction has become the default and I want the maximixe to be the default. Help, please!
-
Unable to stream Netflix on TV through Windows Media
I am running Vista, Windows Media, click on Netflix and was sent to a website. Registrant and I downloaded Netflix. Ordered a movie and it happened on my computer. Not able to listen to my Windows Extender on my TV (other work programs (IE TV and rec