VPN Site to Site Ping from one to the other network failed
Hello
I just get what I can do a VPN IPSec Site to Site. But if I try to send a ping to a PC (network 1)
There not for the other PC (network 2).
PC (network 1)
between the two ASA I funkctional IPSec VPN tunneling, but I can't access from one to the another network. So I hope I will get help here. What are the access on the ASA5505 list: ASA5505 #. access cached list the ACL log stream: total 0, 0 (deny-flow-max 4096) denied alert interval 300 Inside_ICMP list of access; 4 elements allowed to Access-list Inside_ICMP line 1 extended icmp any any echo response allowed to Access-list Inside_ICMP line 2 extended icmp any any source-quench permit for access list Inside_ICMP line lengthened 3 icmp all all inaccessible allowed to Access-list Inside_ICMP line 4 extended icmp exceed all once outside_cryptomap_2 list of access; 2 items access-list outside_cryptomap_2 line 1 comments ACL traffic von ASA5505 zur ASA5510 allowed to Access-list outside_cryptomap_2 line 2 extended ip 192.168.1.0 255.255.255.0 192.168.10.0 255.255.255.0 allowed to access list lengthened 3 icmp outside_cryptomap_2 line 192.168.1.0 255.255.255.0 192.168.10.0 255.255.255.0 no_NAT list of access; 1 items access-list 1 permit line no_NAT extended ip 192.168.1.0 255.255.255.0 192.168.10.0 255.255.255.0 ASA5505 #. Access-group Inside_ICMP in interface outside NAT (inside) 0-list of access no_NAT card crypto outside_map 2 match address outside_cryptomap_2 The inside interface has IP 192.168.1.1 The access list I also on the other ASA network are changed. Could someone help me it will work. Best regards Hans-Jürgen Guenter Please mark this thread as a response but at the moment it is now "not answered", so that it will receive another somoene solve similar problems. Thank you Tags: Cisco Security I have two accounts in Apple Mail. Mailed to some documents from one to the other. When I received the email, it had been sent to about 30 people from my Contacts. How could it happen? I have never create a distribution list. MBP OS 10.11.4 Open the "sent" folder on the account that you mailed to and look at the message that you sent it to see. You have email of the accident to a group? You have a group created in the application of Contact with these names? Or maybe that you click on reply to all to create the message? my mother has two computers that are running windows 7 and she wants to give me one of them, but it first wants to transfer or share all his stuff from one to the other. We network cables and such can I connect the on computers and share information from one to the other? Hello To connect two computers with a cable, not a router, it must be a crossover cable. (You can configure a network or a host group (see below)) Connect two computers using a crossover cable (XP - Windows 7 may be the same) It is a description however computer stores will sell them at low cost. Amazon - example of a crossover cable -------------------------- You can also use Easy Transfer Transferring files and settings: frequently asked questions How Windows Easy Transfer makes setting up a computer easier? Windows 7 Easy Transfer How to get an easy transfer cable ------------------------ These should help: Create a homegroup Homegroup from start to finish Access to files and printers on other homegroup computers File sharing essentials Share files with anyone ========================================= More help at these locations: (Vista references also apply to Windows 7) Vista - LAN Vista network and sharing Center Setting up a network home Home network, wireless network and computer networking Made Easy Windows Vista tip: How to install and connect to a wireless network
Networking tutorial home
I hope this helps. Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">-> How can I chang the language from one to the other? How can I chang the language from one to the other? I can't have multiple files open at the same time! I need to compare the content from one to the other. How to display two files at the same time? Hi sindres79946597, Open Acrobat Reader DC, navigate to the Edit-> Preferences-> General-> uncheck "Open Documents in the new tab in the same window. Now, reboot your system, when you open multiple PDFs that all will open in a new window so that you can easily compare. Kind regards I have only 2 computers, a desktop computer and a laptop computer. Yet, every time I switch from one to the other, I get a message that I am already connected to TWO. It's impossible because I only have 2 and it is not connected. Any suggestions on fixing that? Hi Kelly, Maximum machines, the license can be activated is 2. Somehow, it seems that on your side the same license can be activated on any 3rd machine as well. Activating the license on any other machine, please select the option to disconnect all other devices and try again. Reference: connect and disconnect activate Cloud Creative applications (deactivated) Kind regards Sheena I'll be able to switch from one to the other, AFTER I paid the monthly correspondents after that I updated my billing information? Most fees/membership will be distributed accordingly? All CC commitments are for a year at least. You can switch to a higher level at any time program, but the demotion to a lower level can be a set of songs and dances. Whatever it is, you will still have to get in touch with aid for sale for these questions, so there is little point in dragging this post and explaining everything "and if...?'s. Mylenium can I 'unsync' my 2 computers without losing bookmarks I want to access from the 2nd. I put this computer away and just wanted my favorites, but cannot see how "unsync" without losing them, as he said that I have will be reset their. HEP! Yes, you can disconnect a computer without losing bookmarks on computers. On the computer that you want to unsync (probably the one you're giving away), go to the synchronization options (for me it is Edit-> Preferences, but could also be under Tools-> Options), go to the sync page and click the "disable this device. Disable a device does not have to change anything on the other device. I have 2 computors how can I transfer my favorites from one to the other How can I move all my favorites from one computer to another Bookmarks > show all bookmarks-> import and backup - Export HTML... - on a USB moving from one to the other list values Hello. I think the problem with your code is that you have to exit the loop when the list item is removed. That way, you can also put add_list_element inside the loop statement. This will also remove the second problem when an empty value is added. Best regards Moving from one to the other list items Please use single quotes instead of two points: appointment from one to the other How to make an appointment for a session? I paid for a year and he was only 6 months, so I'm still good. I can't find anywhere how to register for it. Thanks for your help. Try here: Apple - one-to-one -AJ Copy data from one to the other members of the siblings I have the hierarchy of entities such as: 1234-abc-777 -1234-abc-777-a11 -1234-abc-777-b12 -1234-abc-777-c15 and I have to copy the benefit rate which present in 1234-abc - 777-> usd - > real-> 1234-abc-777 children final. I can't hard-code as I haved this type of hierarchy of 30. Is it possible to use any function to get 1234-abc-777-a11. I tried to use the function @Match dim crosswise but I receive the error message when running the script. Note:-a11 is common in any other hierarchy 30. Hello Glenn, I agree that it will create blocks that are not required if you use the DATACOPY approach. But it may be advantageous to have your rate to the level that you are calculating the data (but only for valid data of block combinations) The way I approach this kind of requirement is using this three-step process. I have a previous post where I posted a detailed script. 1. set on RELATIVE("Entity",0), but delete the entities holding rates, in this case use a UDA called RATE_INPUT for example and assign to entities where you enter the rate. Then using calc dense 'rate' = #missing to clear the old values from rates against all entities not RATE_INPUT 2 aggregate rate to the entity above, where the rate is entered. This will mean that the entity kinship is equal to the entity that has RATE_INPUT uda 3. FIX on RELATIVE("Entity",0) but remove the entities holding rates Then using calc dense 'rate' = @PARENTVAL (Entity) to enter the tax rate of the parent. The advantage of this method is to push a rate only to entities that already have an existing block. So not more your database or the number of blocks Thank you Anthony cancellation from one to the other I just found out that my 1: 1 is no longer in existence. I enjoyed this support and am discouraged that it was cancelled without notification. I also paid for this service for the following years of the purchase of an Apple computer. Should not be a refund is due, as the program deleted without notice and I think her is not notified is unethical, particularly when a contract was made by Apple to have use for a year and had to be paid before using? Call the store where your 1-1 took place and ask the store manager (anyone else!) NB100: Line-In/Mic-In - how to pass from one to the other? Hi everyone - lists of specifications more list entry on the NB100 as an audio Mic-In/Line-In, but I can't find an option to go to the line. Is it just the input that is activated when enabling/disabling gain/sensitivity between Mic-In/Line-In? The Mic-In volume would be the same as the change of Line-In? Any ideas? Thanks in advance :) Hello In your case you should take a look in the user manual. The mic jack is a standard 3.5 mm jack, and it allows the connection of a microphone or the other device to an audio input. Good bye definition by the frequency of images from a webcam program Hello I want to set the pace of my webcam at 10 fps, which by default is 30. whenever I acquire images it automatically selects the default and that I must use the property page vi to adjust it... This poses problems because I process the image on th Can't get windows live messenger to open - incorrect configuration When I try to open windows live messenger, I get a message saying that the application configuration is incorrect. I uninstalled the program and reinstalled and I still get the same message. The message is: the application failed to start because t HP G42 notebook: how to check the heat sensor my laptop fire but there is no system message... and performance down... could be heat sensor not properly detect... How to check the heat sensor... I get this error that says: cannot open C:\programfiles\java\jre6\lib\:386\jvm.cfg ideas? I have Acer Aspire 5735Z computer. Using Windows Media Player, I can watch a DVD, but have no sound. checked speakers that work well in other applications. IE I can download music from the internet. original title: can play a dvd. a picture but no soSimilar Questions
These are special cables, but they are not expensive.
http://Windows.Microsoft.com/en-us/Windows-Vista/connect-two-computers-using-a-crossover-cable
http://en.Wikipedia.org/wiki/Ethernet_crossover_cable
http://www.Amazon.com/Belkin-components-CAT5e-crossover-cable/DP/B000067RFT
http://Windows.Microsoft.com/en-us/Windows-Vista/transferring-files-and-settings-frequently-asked-questions
http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-easy-transfer-make-setting-up-a-computer-easier
http://Windows.Microsoft.com/en-AU/Windows7/products/features/Windows-easy-transfer
http://Windows.Microsoft.com/is-is/Windows7/how-to-get-an-easy-transfer-cable
http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup
http://Windows.Microsoft.com/en-us/Windows7/help/HomeGroup-from-start-to-finish
http://Windows.Microsoft.com/en-us/Windows7/access-files-and-printers-on-other-HomeGroup-computers
http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials
http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone
http://www.onecomputerguy.com/Networking/vista_network.htm
http://www.onecomputerguy.com/Networking/vista_network_sharing_center.htm
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network
http://www.home-network-help.com/
http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html
http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
Practically networked - everything you could possibly want to know.
http://www.practicallynetworked.com/
Nicos
then
Bookmarks > show all bookmarks-> import and backup files on this USB - import HTML... -
I want to let the user to move the list value from one list to another list empty on click of a button.
I filled dynamically on one list * what new form of instance trigger.*
I m trying to comply with the code on button click on...
I have to move the shape SO list box item list box.
When I run a form, select a value in an intermediate position of a list and press the button it gives a message like * 'ELEMENT OF THE INDEX LIST' * and also move the value in another list.declare
n1 number:=0;
n2 number:=0;
list_label varchar2(50);
LIST_VALUE CHAR(5);
v varchar2(25);
begin
n1:=get_list_element_count('DTL.SA');
n2:=get_list_element_count('DTL.SI');
IF N2 IS NULL THEN N2:=0; END IF;
IF N1 IS NULL THEN N1:=0; END IF;
IF N1>=1 THEN
if :DTL.SA is not null then
LIST_VALUE:=:DTL.SA;
FOR I IN 1..N1
loop
v:=get_list_element_VALUE('DTL.SA',i);
if v=LIST_VALUE then
LIST_LABEL:=get_list_element_LABEL('DTL.SA',i);
delete_list_element('DTL.SA',i);
end if;
end loop;
add_list_element('DTL.SI',n2+1,LIST_LABEL,LIST_VALUE);
END IF;
END IF;
end;
When I press the button without selecting all the values in the list, it inserts an element in another list...
Please tell me how to solve this problem...
waiting for m...
Thanks for any response...
Regarding
Vishal amine
...
FOR I IN 1..N1
loop
v:=get_list_element_VALUE('DTL.SA',i);
if v=LIST_VALUE then
LIST_LABEL:=get_list_element_LABEL('DTL.SA',i);
delete_list_element('DTL.SA',i);
add_list_element('DTL.SI',n2+1,LIST_LABEL,LIST_VALUE); --transfer value inside loop
exit; -- exiting loop when element found
end if;
end loop;
...
I want to move the SELECTED items to form one list to the other when I'm clicking the button...
I wrote a code to transfer a SELECTED ITEM...
The code is:
Begin
Add_List_Element ('block3.lst_value2', 1,: block3.lst_value1,: block3.lst_value1);
End;
But I need to move all the article (without selection, from one list to the other) when I click on the button...
Also if I didn't choose any item and pressing THE PUSH BUTTON, a message should appear that no item is SELECTED.
Please help me...
Thanks in advance...
begin
CLEAR_LIST('block3.lst_value1');
RETRIEVE_LIST('block3.lst_value1', 'MYREC');
POPULATE_LIST('block3.lst_value1', 'MYREC');
end;
I would like to be able to record audio with an external preamplifier, therefore the Line-In input, would be really useful.
The user manual says that this laptop supports and taken headphone and Microphone jack.
This means that you do not need to change anything. Simply plug the connector of right to take.Maybe you are looking for