VRF multi on PPPoA

Similar Questions

• ASA 5512 different route by VPN Group (VRF as feature?)

  Hello

  Here's what I'm trying to do.  I have a Nexus 7000 with several of the VRF, simplicity lets call it A VRF, VRF B, VRF C. VRF A simulates a network of management and VRF B and C are customer environments.  VRF B and C VRF will be overlap of intellectual property.  I have a 5512 ASA I use VPN in the environment, it also provides internet access for applications that run in A VRF, (VRF B and C do not require internet access).  What I want to do is to implement three different access VPN on the SAA even, where some users will have VPN 1 group policy and have access to the VRF has, but should not have access to the VRF B or C, same VPN 2 should have access to the VRF B and 3 C VRF VPN.

  My original intent was to configure the ASA with 0/0 to internet Gig, Gig 0/1 A VRF and then Gig 0/2 sub interfaced so 0/2.10 is 10.10.10.1 in VLAN 101 that connects VRF B, 0/2.11 concert would be 10.10.10.1 in 102 VLAN that connects to VRF C.  However, better than I can tell ASA 5512 is not aware of VRF (or is it just a separate license, I would need?) and as such, it is not possible.

  Next similar reflection, but instad configure as 0/2.10 is 10.10.10.1 in VLAN 101 that connects VRF B, 0/2.11 concert would be 10.10.11.1 in 102 VLAN that connects to VRF C. However, I throw it here, issues as the VPN 2 and 3 need access to devices with the same IP address, which is even better I can tell, the ASA is not able to make Policy based routing.

  Is there another way to do this? Is there something that I am on?
  I need to make sure that the 2A VPN users can access services available in the VRF B, they should not have the ability to access (intentionally or not) services on VRF A or C, nor the users VPN 1 or 3.

  I have also a 5585 ASA w / context multi license, I can then creates a context by VRF (that I have), I then interfaces in each correct the VRF-related context.  However, I do not think that I can terminate VPN here, best I can tell when in multi-contexte mode you can not have VPN license.

  Your research led you to conclude correctly that the ASA is neither compatible with VRF nor can it be based on routing strategies. Also, you cannot terminate remote access VPN on an ASA multi-contexte.

  Doing what you ask a single AAS is a bit problematic. If you had a unique internal addresses, the subinterfaces would work fine.

  Because it looks like you have a virtualization infrastructure, have you considered using the low cost ASAv? You could run multiple instances, one per VRF. Everyone knows only the public address space and its respective assocated VRF.

• Cisco 3750 X - 24 Port stacked: support VRF?

  Hello community,

  We have 2 x switch WS-C3750X-24 t-S that are stacked through StackWise cables.  We would like to activate VRF on it, but orders aren't there. We currently have a basic IP license (which I know is the reason). I tried to do some research and looking at the release notes, but the answer is not clear. I read that it is only available as a stand-alone and not stacked switch. Is - anyone out there know if this device is capable of making the VRF as a battery? If so, what are the requirements?

  Thank you

  Neocec

  Hello

  You can use this link to verify what image you want.

  Ref: http://www.Cisco.com/go/fn

  1 select 'Search by feature' and "Multi-VRF VRF Lite support"

  2. Select "" Cisco 3750 x".

  Finally, you will see that taken IOS support this feature. Then go to the download page (if you have the right to download.)

  HTH,

  Toshi

• Apple mail appears not multi-party digests

  Upgrade to Mac OS Sierra and now Apple Mail does not appear the contents of multi-party digestions. Has anyone else seen this and how to fix it?

  Hello Frederick-b,

  Thanks for this info and choosing the communities Support from Apple. I know how important being able to see the content of several parties digestions in Mail is for you. Based on what you said, it seems that you may want to change the settings of the conversations on the view menu, activation of the conversations or disabling, or expand or collapse the conversation in the list of messages.

  Discover conversations - help Mail

  See you soon!

• different rates in multi-clip

  I turned a conference with 2 cameras. One is 29, 97i and the other at 23, 98p. I did an edit multi-pince. I noticed the movement of 29, 97i camera is choppy. What should I do to correct this?

  Jerky in what way? Jerky stabilization? Where are you seeing this? In the clip of browser? In the multicam Editor? In the project? What frame rate is the multicam clip and the project?

• problem with marking albums multi disc

  In the past when I have an album that has say 3 CD, I was able to right click > get information, then place the disc 1 of 3, 2, 3 and 3/3. In my case music files would then appear as 1-01, 02-1 right through the first disc and the 2-01, 2-02 and so on.

  Now, I do the same with itunes 12 but in the folder it now appears as the title of the 01 01 title song, 01 song title then 02... It does not differentiate which is drive 1, 2 or 3. Is it possible to go back to the old way to do.

  You'll be amazed how much multi discs, I have...

  Any help appreciated

  Let iTunes do file management and don't worry in this regard. Your only interaction with your files either through the iTunes interface, where questions of multi-disc are correctly identified.

• When Fire Fox support (again!) for display of multi column (and navagable) Favorites (bookmarks)?

  I always use rev 31. This is the last version that is compatible with the add-in on, "Multicolumn Bookmarks 1.5', I have several brands of books collected over the years and the single column format is frustrating and not helpful."

  Asked to provide a current version, which is compatible with "MultiColumn Bookmarks 1.5' Fire Fox, or provide a favorite navigable multi-column as option display in a near future program revision Fire Fox.»

  Sincerely,

  Pierre Arnold

  Sorry, to complete the thought:

  (1) install Stylish from the Mozilla Add-ons site

  https://addons.Mozilla.org/firefox/addon/stylish/

  (2) then back to the user page of style to get the style (the button should be green instead of blue right here)

  https://userstyles.org/styles/119797/bookmarks-menu-in-multiple-columns

• LogicProX with multi-Bank external intrument

  How can I get Logic Pro X to support a device external MIDI as follows:

  I have a Yamaha MOXF8.

  This instrument has 17 different banks.

  Bank changes are issued using the following protocol:

  Bank 0: 0, value 63 followed by control 32, value 0 control

  Bank 1: Control 0, 63 followed by control 32, value 1

  Bank 2: Control 0, 63 followed by control 32, value 2

  etc., thought that all the 17 banks

  Any ideas?

  Thank you

  Soniq-

  External midi track

  use a multi-instrument

  Banking and parameter values can be selected in there (as defined) then choose using Inspector on or embedded in the midi track.

  

• Time Capsule gen more recent problems PPPoE

  Hi, I have problems with the PPPoE connection in last TC with 7.7.7 firmware on it. When I put my dsl bridge modem and use the pppoe client in TC he just can't get IP address. I need reboot/update of TC for like 10 times or more to make it work. When I put my dsl router mode and I use TC only as DHCP server it works perfectly. What is the problem? Should I get RMA?

  I discovered, when I enter my details PPPoE client PPPoE TC and I put any name service, that I can not get the Internet to work, when I erase this service name I get all green lights and BAM, my internet connection works. But now is real problem, when I want to change something, for example DHCP reservations or anything else. If I click on update and the Service name field is empty so I can't have a internet connection. I need to re - enter any name service, and then the update, and then clear the name of the service for the empty field, then the work of internet connection. So I need to restart TC 3 times if I want to get internet connection.

  Think it's a bug in the firmware a little? I had this problem on 7.7.3 firmware also Pls help

• Firefox 36.0.1 causes InfoPath 2010 multi-line text boxes do not work - how to fix?

  Since upgrading to Firefox 36.0.1, generated by InfoPath 2010/SharePoint 2010 multi-line text boxes is no longer move to the new lines when the text is entered. Like a lot of text is entered, the cursor remains on the first line.

  36 Firefox in March in favor of the white space in < textarea > style property controls for the first time. So, if the control has a white-space: pre rule, then Firefox will wrap is no longer text in version 36 +.

  Please see this thread for more information and potential code solution:

  • Problems of film to 36.0

• I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  My sincere apologies, my Mcafee came via the Optimum/Cablevision, not Mozilla. I now managed to solve my problem and appreciate the 2 above responses. Thank you.

• How can I get multi channel audio via the HDMI port on an early 2015 MacBook Pro?

  I try to get the 7.1 audio channels to flow from my MacBook Pro to a cinema set up. The display works fine now I plug the HDMI in however the sound still Mac speakers. I checked the settings and no HDMI output is available. An airtime option is available, but that returns only two channels as a maximum to the receiver. When I go to the configuration of the source on the receiver it receives video at 1080 p 60herts however it is specifically stated No Audio from the Source.

  Also, I have connected my iPhone 6 s more using an Apple through the same HDMI cable adapter and it works perfectly. We also use HDMI with our PS4 occasionally and it works perfectly, even with the 3D.

  Thus, the MacBook Pro is early 2015 with an i5, the receiver is a Harmon Kardon AVR 2700 (we run 7.1 channels of this) and we are connecting via the HDMI port through a 50 ft HDMI before. The receiver sends the audio to a projector with 1080 p 60 hertz if it changes anything...

  Also if it helps the receiver supports dts - hd master audio decoding, Dolby True HD/Digital Plus decoding, HDMI 1.4 (HDMI is compatible 2.0), as well as multi-channel input and PCM and linear PCM.

  I use a "Behringer UCA202' audio device I bought on amazon.com for only $29.

  It works very well for the audio 5.1 or 7.2. Works connect optical toslink. Just plug it into a usb port on your Mac and a cable optical toslink to your AV receiver.

  My Yahmaha 7.2 audio/video receiver is measuring process the digital signal in THX, DTS, Dolby digital Pro logic, a cinema, etc.

  

• How to preserve the multi-level iPhoto in Photos folder directory

  If you upgrade OS to Yosemite or El Capitan, how to preserve my folder customized Photos iPhoto multi-level directory? My iPhoto library is 105 GB and contains 41 000 photos, all carefully arranged in a directory of custom and subsidiary subjects.

  iPhoto (the beloved and only) has a great power in its ability to custom folders full of full of albums etc. subfolders directories several levels deep, with photos that can be duplicated in different albums, folder & file size info, etc. Unless this can all be kept in the Photos, there is no point me upgrading until Apple gets serious on the needs of demanding photographers, who want the custom control and want as their stuff protected in their hard drive and not on the cloud. Automatically generated 'events' and 'albums' are things of grandmother-and-the-children, useless for people like me. I need a custom control over making inventories of multiple folder levels based on my own custom categories, categories or undated events Apple thinks we should have. Home, school, family, travel, etc. just does not cut it!

  Someone really aware with this situation can help me get clarity? Promo stuff on pictures Apple responds to virtually none of my questions.

  I would like to begin by asking in the forum of Photos, but until you do, you need to specify your terminology. iPhoto offers events, Albums, and smart Albums for the organization. Thus, by "directories" I can only imagine say you you have files of records nested within other folders? If so, you can do with Photos. There is no need to use the features of cloud Photos. They are not mandatory in any mode.

  Regarding your comment, if you're a serious photographer why you use iPhoto? Make sure you used Apple app for photographers, it was called Aperture. Now for photographers you use applications 3rd party - Lightroom, Capture One etc.

• How to get back my multi-line bookmarks?

  I used to have more than 1 line of bookmark and now after the reset I'm back to 1. I can't find information that tells how to add another line of bookmarks in.

  Try with Addons

  • https://addons.Mozilla.org/en-us/Firefox/addon/Multirow-Bookmarks-toolbar
  • https://addons.Mozilla.org/en-us/Firefox/addon/multi-links/

• The multi site bookmark

  Is it possible to insert a bookmark of the multi site? For example, a click opens 8 sites/tabs. If so, how is this installer?

  To avoid confusion: http://kb.mozillazine.org/JavaScript_is_not_Java

  {Ctrl + click} works like the Middle-click.