vSphere e Rete

Ciao a tutti, come devo una rete per UN ambiente virtualizzato set. Ho Simulator it seg. Scenario through the vware workstation, vi chiedo consigli a riguardo prima di replicarlo in production:


1)

-vm win srv 2008 (no domain) con free vcenter 5.5 Ip 192.168.10.101/24

-vm esxi 5.5 nodo A Ip 192.168.10.110/24
-esxi 5.5 vm node B Ip 192.168.10.120/24

-vm created iScsi san con openfilier che ha 2 Lun Ip 192.168.10.102/24


2)
I have data center (nodi A e B) sono aggiunti nel Cluster HA


3)
I have 7 door di ciascuno rete hanno nodi

?:

(A) the vm da agganciare THE Datacenter che tipo di indirizzamento must turned out? Okay 192.168.100.x/24?
(B) the networking of Datacenter dei e stata settata come da content, in modo da avere delle ridondanti sk: corretto? GRAZIE 1000

OK, ho capito, who ho play a utilizzare 2 indirizzamenti fast.

Not e proprio sbagliato, is No ICU iSCSI multipathing, you can found it quality iSCSI Reed knew various reti, cosa sconsigliata in quanto vai ad add passaggi al your needs dei dati. ESXi dear (tramite his di routing table) the prima vmkernel e che risiede nella stessa rete del iSCSI target port her usa. SE hai più vmkernel port nella stessa rete non will be used cars.

Banalmente can you Ténéré killed her rete iSCSI isolata (VLAN o how) e usare una rete diversa (Es. 192.168.200.0/24) by the TEU vmkernel port iSCSI target. SE he tuo target iSCSI ha come ip 192.168.200.10/24 ESXi ed usera attempts the prima vmkernel port ip nella rete 192.168.200.0/24 con.

He concetto fisico e chiaro... vedo is possible simulō it Nell di test failover (adesso ho all the dentro vw workstation vm). Quindi assegno alle due nic interfaces, ad esempio the vmnic4 con E1000 e the VMXNET con vmnic5.

Ipotizza di avere due schede di rete brother dual port ognuna knew a server. The 1 avra vmnic0 scheda e vmin1, scheda di rete 2 avra vmnic2 e vmnic3. Se the scheda di rete 1 TR break, smetteranno di funzionare sia vminc0 che vmnic1. In questo caso, pensavi di avere una fault tolerant my non e cosi. Devi distribuire it quality brother knowledge 1 e schede sulle 2 andando ad set he teamed with failover con vmnic0 vmnic2 e vmnic1-vmnic3.

In questo caso ho 2 interfaces attive, my solo 1 works? in caso di assenza di marked sul link interviene l'altra automatically? oppure devo solo keep 1 attiva e l'altra standby?

SE imposti correctly gli indirizzi ip e non usi iSCSI multipathing solo una e works the Ténéré both attive you can. SE una TR guasta l'altra prendera he suo posto.

Tags: VMware

Similar Questions

  • Cambio scheda di rete per gestione con vsphere

    HO a 5 free con esxi due schede di rete (vmnic0 vmnic1 e): film di ESXi ha preso come scheda di rete, sulla quale mi connect con vsphere client the vmnic0. So come fa per cambiare questa impostazione is io volgio collegarmi con vsphere client sulla vmnic1?

    Grazie

    Se you you want Mio host anche dalla rete telefoni so, e corretta purche quella VMkernel port sia di tipo management.

    TI remains he problema della ridondanza.

    2 nic brother vanno a 2 switch diversi allo stesso switch fisico o?

  • Neofita con Vsphere by UN progetto important

    Ciao a tutti Ragazzi,

    new del forum e sono sto moving I primi passi con lo software spettacolare VSPHERE.

    is DIO Vuole, devo migrare far da server substitutes a virtuale vsphere rete di un client important struttura.

    I like tight far client al essential licenza vpshere + 2 new servers (hosts); E probabilmente anche veembackup, Reed is non trovo rete delle guide pero ho alreadyà che don't parlate molto bene.

    In hoist ho put it progetto fatto e che I like mettere in piedi, my non mi è chiaro features dei Server di cui ancora ho need

    VI list the che mi servirebbero Vm in modo che gentilmente possiate consigliarmi quali servers andrebbero bene...

    (VI prego di rispondermi alle request che vedete in basso)

    -HOST A = 1 VM = Linux Ubuntu Server 12.04 e a SAMBA PDC (da 1 processor 2 VM + 4 GB ram + hd 500 GB)

    -HOST B = 1 VM = Windows Server 2008 R2 (portion by far run UN gestionale sql a cui here if collega anche da remote) + Server Vcenter (VM da 1 processor core, 4 GB ram + 100 GB hd 2)

    -HOST B = 1 VM = Windows 7 Professional x VM Backup veembackup (da 1 processor 2 VM + 4 GB ram + hd 50 GB)

    -HOST A = 1 VM = Windows Xp Professional (remote pc by white dati giuridiche) (da 1 processor 1 VM + 2 GB ram + hd 25 GB)

    -HOST A = 1 VM = Windows Xp Professional (remote pc by white dati giuridiche) (VM da 1 di 2 GB hd 25 GB of ram + cpu 1 core)

    REQUEST:

    (1) il Vcenter posso installarlo sulla gestionale del VM? o serve una dedicated vm?

    (2) Veem Dove backup going free? Known una macchina fisica o dedicated basta una vm? to mi down the host in cui spinning the vm con veem, riesco solo dal a plane ticket he NAS QNAP recovery? oppure veem by fare recovery ha need del pc in cui e da?

    (3) the risorse assegnate alle vm del progetto vanno bene secondo Voi?

    (4) secondo Voi mi bastano degli HOST con dei e image 16 GB di ram by it project? Mi servono degli Esa-core by reggere bene oppure all the VM e poter guarantee che quest' ultimate girino bene nel caso in cui uno degli HOST sia fuori uso?

    (5) ARE: Simulando che A ESXi Host goes to low e con VeemBackup tiro su dal NAS QNAP altre vm che mi servono e the Moussa sul NODO ESXi B che remains acceso, quest'ultimo regge bene all the vm?

    (6) per problemi di budget Reed tutti i brain sono SATA SAS instead... This will be big differenze di prestazioni nei backup notturni? Nel Miss delle macchine dal nas?

    Sempre 7) by budget, sono che cerco Server dei giorni di problemi da 4core e 6core, ho visto dei DELL, FUJITSU, IBM E HP proliant, my a di meno 1400 euro + iva nn ce nulla... (senza hdd e raid.) ; so che devo cercare material certificato vmware, not being expert di vsphere ho he nebbish che in caso di ko di UN altro non mi regga host all the vm con UN server a 4core xeon...

    (8) mi potete cortesemente consigliare some modello di Server da usare come from the hosts, che costi non molto?

    Devo fare it al preventivo client entro the next week, my ho questi doubt nella testa...

    Ringraziandovi in pre-empted, spero che possiate help very.

    Ciao

    Momo

    (4) secondo Voi mi bastano degli HOST con dei e image 16 GB di ram by it project?

    her somma delle ram delle macchine che vai a virtualizzare e 14 giga quindi sono molto currently o surdimensionate o tutte knew a host girerebbero probabilmente a fauvergue.

    Vedrai che quasi sempre risorsa che if esaurisce prima e ram, not the cpu. Quindi partirei con at least 32 giga by host.

    Quanto al vCenter, no lo mescolerei con altro. Oltretutto vuole ram UN 4 giga solo by him, di quindi I conti sopra sono sballati. SE he problema e di una licenza windows esiste the appliance risparmiare virtual vCenter.

  • Price Licenze vmware vSphere 5

    Salve a tutti,

    MI'd proved it vostro parere alle licenze riguardo da acquistare UN piccolo progetto vmware.

    Cluster UN reralizzare ROM piccolo due nodi con HP storage external thanks Server functional di backup e.

    Che tipo di licenza acquistare ROM? I server sono biprocessore con svariati core uno.

    VI want

    Ideal ha scritto:

    Grazie a tutti per risposta, di aver capito che posso tranquillamente utilizzare questo prodotto giusto seems to me:

    http://store.VMware.com/store/vmwde/en_IE/DisplayProductDetailsPage/ProductID.234153300

    Con queste functional

    Confermo he prodotto e quello.

    That you'll find all the official menus

    http://www.VMware.com/support/pubs/vSphere-ESXi-vCenter-Server-pubs.html

    SE invece you want some example howto, cerca in rete o, don't dovresti find a vagonate.

    TI consiglio anche di fare UN passaggio sui vari blog dei ragazzi della community, potrai find a sacco di info use

    in ordine casuale:

    http://vinfrastructure.it/

    http://www.vuemuer.it

    http://virtualbyte.WordPress.com

    Ciao

  • Consigli knew vSphere 5

    Buongiorno a tutti,

    STO ereditando gestione Abierta IT quale of he di un client ha need di facere knew a due su vmware cluster host HP ML370RG5 reference number: 433753-421
    I had sono dotati di processore image host.

    It mid indica di questo prodotto appraise client: http://store.VMware.com/store/vmwde...234152800
    Recita "kit for 3 guests, max 2 CPUs per host. He mio IOC e: an e tutti sfruttare riuscirei 4 I core by each dei due host?

    in più mi chiedo: vmware essentials kit (579 euros) mi will bene per fare a cluster con questi due host?

    avrei it tipping a caldo? (intendo che se a schianta, the passano vm host a sull'altro caldo).
    Altra ipotesi will: will Shrek implementare sui due host an ESXi 5.0 U1, otherwise later estenderlo semplice a vshpere 5 essentials kit o altra licenza a pagamento?

    Avete gentilmente Guide to Infine, link, by the construction di consigli a cluster vsphere 5 dato che non ho may created.

    Want sentitamente VI

    Mirko

    a HA is, da quanto apprendo da te, in una specie di failover "a freddo." ovvero the vm if spengono e poi automatically ripartono sull'altro host.

    If

    failure tolerance e proprio lo switch "a caldo" invece della vm sull'host adapter.

    the ft is una VM "specchio", che e accesa simultaneously a main quella, replica tutto in tempo reale e, to host Dove gira muore prima, become a quella "attiva". Pero limitazioni sono aunt, per esempio una solo vCPU, I have brain must be virtuali di un certo tipo, usa molto the rete...

    Quali costi avrei una licenza che provides fault tolerance by the o HA?

    nel link che avevi posted by that era Reed the tab by the essential more che ha ha (ti of che nello schema verification ho Linkato)

  • twice scheda di rete

    Ciao, ho a host presso a datacenter remote esxi 4.1, misconfigured con pubblico e quindi raggiungo con vsphere client ip.

    Ho generato some macchine per dei servizi web e per UN anteporre firewall ho UN firewall free thus, Ipcop, piccolo ho quindi nel vSwitch0 created

    due lan (internal and DMZ) e connesso ipcop ad both the door.

    The vm invece sono state set up solo sul lato interno.

    The networking of ibm_db ora guardando sulal parte con vsphere client e che ho una scheda fisica vmnic0 connessa all'unico vswitch0.

    Vedo quindi UN Machine virtual port group Dove vedo e DMZ FIREWALL, poi sullo stesso vSwitch0 3 vedo machine virtual ip interno con

    for example 10.10.1.1/3

    ORA, di questa domanda purpose, it datacenter deve connettermi su lan international uno Qnap storage, che I like mettere appunto sulla ip lan international con 10.10.1.4, firewall it backstage, visible alle altre vm.

    Dal momento che UNICA scheda di rete fisica e connessa al loro current pass e ha UN ip pubblico idea loro e di aggiungermi una seconda scheda di rete che quindi will not be usata dall'host by equilibrado

    SE loro the montano, io posso Calda al vSwitch0 current? in modo che connettendo a porta questa storage preconfigurato gia con lo interno (for example 10.10.1.4) ip possa essere raggiungibile immediatamente slab vm lan sulla stessa?

    Spero di essermi spiegato bene

    Grazie

    Ciao

    Ciao,.

    You can simply because creare a vswitch allora che utilizzi nuova scheda di rete nuovo, ed abbia un nuovo portgroup. TI inventi una rete a scelta e metti ip compatibility sullo storage e uno nel portgroup (di tipo vkernel) nuovo, Chessò 10.0.0.11 e 10.0.0.12, both 24. Wanting in cross cable, tanto must parlare loro solo Reed...

    POI crei share NFS (o it iscsi target) e monti sul Server ESXi...

    Ciao,.

    Luca.

  • VMware esxi5 problemi con the rete. The comments not effettuano he ping back the host

    Hello to all,

    STO sbattendo tested con questo problema da at least due giorni e non capisco causa.

    Macchine comments sound provviste di due schede di rete ognuna delle quali punta ad UN vSwitch (vSwitch0-> vmnic0,-> vmnic1 vSwitch1).

    The prima anomalía sorge quando, tramite vSphere Client clicco sulle info delle vmnic, ed ottengo "Cisco Discovery Protocol is not available on this physical."

    adapter. Typing sulla shell he comando esxcfg-vswitch - b vSwitch0 ottengo two quindi in theory should be abilitato.

    The adapters sono delle Broadcom NetXtreme II BCM5709 1000Base-T network. By material questo ho anche da aggiornamento driver

    downloaded a questo link http://downloads.vmware.com/d/details/dt_esxi50_broadcom_netxtreme_17034v501/dCV0YnRAJXdidGVkZA==

    Unfortunately he problem persists. Some suggestions?

    Grazie anticipatamente.

    P.S. the community of Bella!

    Ciao,.

    da quello che vedo nello schema the vmk0/1 non sono taggate mentre I portgroup delle TR VM: a di seconda come sono gli switch substitutes devi indicare o the vlan corrretta sui vmk0/vmk1o n the vlan dai portgroup delle VM... is not information switch sugli hai substitutes... the ISP had to prove

    Giuseppe

  • Consiglio per configurare rete

    Ciao, avrei need di consiglio of the United Nations by the configurazione di rete 3 di corretta welcome da installare presso a datacenter.

    The mia esperienza current if basa su due tipi di gestione degli host diversi.

    Host of the Uno di questi e 4.1 presso a datacenter estero, ha a pubblico del tipo ip

    IP: 81.82.83.84 mi hanno poi Bolivia 3 ip pubblici addizionali

    91.92.193.94/5/6

    255.255.255.0

    91.92.93.1 (bridge)

    Ho downloaded vsphere client, free it firewall ipcop come vm, creato UN vSwitch by the demilitarized zone e misconfigured it lato wan 91.92.93.94, poi it lato lan 192.168.1.254, all the vm sulla class 192.168.1.x con gateway 192.168.1.254.

    In caso di problemi sulla vm firewall potevo con ssj2 vsphere client sull'host per riavviarla, backup, etc. ripristinarla da un.

    Ad ogni modo avevo dog manage host che sia di option it quindi accesso all 'uno o all' Party, firewall altro sempre garantizarse, salvo gli eventual low dellhost are directly pero da console dal datacenter

    Her seconda e diffusa configurazione che ho e nei interni Dec, tutti gli su dmz host international dietro have hardware firewall

    He mio dubbio e quindi mia request di UN consiglio e sulla struttura nuova che devo realizzare.

    Ho labor-intensive vsphere essentials 5, ho be host, una san knew cui risiedono vm distribuite host sui 3, a SAR of backup it.

    Devo installare e poi manage queste macchine in a datacenter, it quale mi ha Bolivia 8 IP pubblici tipo

    51.51.53.54/55/56/57/58/59/60/61

    255.255.254.0

    51.51.52.1

    Since ho gia e da misconfigured vSphere 5 be sui, vCenter su una vm host international, con tutti una class di rete del tipo

    192.168.10.x, e ho creato vm firewall sulla quale configurare I wanted the part wan.

    Pero, in effetti, is mi cade vm IO quella da remote entro non più da any go, Ditto to ha problemi the host, accedo non più a vCenter, and even all' con UN vsphere host customer since ha UN ip interno.

    I think that the ibm_db sia enough Italian so I wanted to just come if process in questi casi.

    Probabilmente the ibm_db normal would be mettere a rises a firewalls external wan managed by the firewall, in modo che attraverso vsphere client am riesco host Semper ad reach (door che ROMA open sul fw per connettermi directly all' interno con UN vsphere host client dall?) e riavviarlo, add o Pagnotta vm etc.

    Replacement suggerimenti?

    Spero di aver spiegato bene mia domanda

    Ciao

    Grazie

    Any

    O meglio, io metterei UN bel terminatore sul Firewall VPN, che mi da accesso alla vlan management dei nodi ESXi, e di da li li controllo.

    Evita di pubblicare wear di outdo dei nodi ESXi directly su internet.

    SE poi you want to provarci ugualmente:

    http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1012382

    Put agli atti pero che io SIA you avevo sconsigliato

    Ciao,.

    Luca.

  • Topologia Fibra vSphere

    Hello to all,

    non siamo con esperienza installazioni di vsphere in ambienti con ho storage to fibra e I wanted some delucidazione.

    Ho needs di configurare 2 nodi ESXi 4.1 con uno storage HP P2000G3.

    The idea e quella di ogni nodo furnish mia con una scheda fibra 8GB Dual Port e lo storage controller HP con doppio, dei quali ha 8 Port HBA 2 GB each.

    He IOC e mio to sia necessario o meno insertion di go tra Fibra I nodi e lo storage, o is posso evitare e price incorciare directly I have electric tra dei nodi e HBA HBA dello storage, senza passare dagli switch.

    Seguito di I have electric che if:

    Nodo 1 HBA1 knew Controller 0 HBA1

    Nodo 1 HBA2 su controller 1 HBA1

    Nodo 2 HBA1 knew Controller 0 HBA2

    Nodo 2 HBA2 su HBA2 1 controller

    Grazie!

    VDR e solo version device... e quindi o networking o hot add terms terms.

    Using the terms e una applications added to hot sulla rete dello storage (NAS iSCSI NFS 'entry' anche UN o level) if Può avere un effetto simile ad UN SAN mode... comunque o quanto meno LAN free.

    Veeam (my ad essere anche altri di backup programs onesti) knew macchina fisica invece Può cialis Reed terms SAN (deve avere una "zampa" nello storage pero).

    Andrea

  • Following the upgrade to 34.0.5, I can access is no longer our SAN, airco, vSphere customers Web web pages, etc. How can I fix this?

    After upgrade to 34.05, can no longer access the web pages of the SAN, the air conditioning system, vSphere Client Web management interface, etc. All still work in Chrome.

    The air conditioning system gives an error:

       Firefox cannot guarantee the safety of your data on 10.32.16.50 because it uses SSLv3, a broken security protocol.
       Advanced info: ssl_error_no_cypher_overlap
    

    The management interface SAN and vSphere customers Web display an empty page. Not sure if they have problems due to SSLv3.

    I understand that you want to be careful, but I seriously doubt that I have to deal with an attack of our SAN. Please, at least give us an option for you connect without worrying.

    Unfortunately, it is not possible so set this preference selectively - with preferences of internal firefox mentioned previously, you can only enable or disable the low globally.

  • iPhone if disconnette dalla rete wifi quando e in stand by e no arrivano notifiche di messaggi, whastapp e mail

    Salve a tutti,

    Ho da poco labor-intensive UN iPhone 5s nuovo da 16 GB e da pochi giorni ho noticed he following problema: dopo a periodo di some UNAMET da quando block the screen, it wifi if disconnette e quando paper the screen, the linea wifi TR riconnette dopo few e secondo the e che tutti gli imessage diretta conseguenza, I send whatsapp e messaggi , arrivano in e remember mi are not notify all' arrival. Questo fino a pochi giorni fa no accadeva. Ho ripristinato he telefono come nuovo e Ho aggiornato (iOS 9.2.1), ho router resettato it my questa cosa continued a sometimes. Sapreste tell is forward-looking questo da UN don't dell'antenna wifi del mio iPhone oppure da una functional di cui non ero a knowledge, che probabilmente dispersion o disattiva instradamento wifi per ridurre lo spreco della batteria? Grazie

    Anche io ho da tempo questo problema, ho resettato router Wi - Fi, iPhone e iPad my he problem persists any rete WiFi con. Just bloccato a TR disconnette volte, a volte anche mentre TR use there phone. Really un problema molto fastidioso, escluderei categoricamente che if tratti di una functional come invece leggo some support, prima dellaggiornamento an iOS 9.1 (circa) non avevo some tipo di problema.

    In fact many functional legate al wifi if svolgono proprio mentre he telefono e bloccato e conesso come backup, caricamento foto sulla libreria, aggiornamento applications, musical libreria aggiornamento... No would by tanto senso.

  • Parameters of the BIOS for VMware vSphere 6 & X 3650 M5 X 3550 M5

    I'm looking for the list of the BIOS settings recommended for high performance with VMware vSphere, ESXi 6.0U2 on M5 Lenovo rack servers. Any help would be appreciated.

    Hello

    I think this trick gives an idea of what parameters to look for, such as various energy saving features disabled.
    TIP H214692 unexpected of slowed performance VM in VMware
    https://www-947.IBM.com/support/entry/portal/docDisplay?lndocid=MIGR-5098137

    In addition, speaking in general.
    Use the latest UEFI firmware
    use image latest Lenovo personal ESXi
    Use the latest drivers

    Sure enough power and cooling

    Kind regards

  • CPU usage. Difference between VsPhere and Zabbix data.

    I have the following problem: when I get maximum use of the processor (for the last 30 days) via PowerCLI, I maximum 58%, for example. But Zabbix tells me, that maximum usage was nearly 100%! What value does not? Is it possible to convert data from Vsphere (PowerCLI) to the actual view?

    Way outside the scope of this site.  You will get a much better if requested reply on Technet

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • Individualization Condivisione Condivisione Rete Rete network in ingresso In entrata Assistenza remota Servizi RDP Remote Desktop terminal Remote Desktop

    Mia outdo rete Wireless 2 is no, in particular after cross abilitata compare sempre una X rossa e quando tento di riconoscere far it mouse HP wifi, fino has some tempo fa adapter, no lo riconosce. In particular lo accendo per farlo riconoscere dal PC e parte outdo my dopo a brief secondo dopo che by a device P2P del mio PC poi scompare ed in. He mio PC non riesce a point the access of air ticket. Fino has some tempo fa al momento dell'accensione it PC if sia connetteva alla rete wireless wifi di internet usually e sia come detto all gia'altra outdo P2Pnome del mio PC. Non sono riuscito a discovered como ripristinarla. È qualcuno che mi Può help.

    Grazie
    Daniele Santoro

    Bollettino Microsoft answers store supporto in lingua inglese. Di seguito Uniform Resource Locator (URL) fara in modo di ricevere information support by the posizione adeguato. Open it be e rates regione dal menu a tendina e quindi fare click sul pulsating freccia in continuare.

    http://answers.Microsoft.com/it-it

  • What does REt?

    I'm looking in the settings of the printer for my Laserjet 1022 and there is a checkbox for "RET" and I don't know what it does. Anone can advise?

    REt is a way to make print look better.  This is an increase in resolution.

    REt = HP Image resolution Enhancement technology

    This link has a good description of the retreat and functioning on your HP LaserJet

Maybe you are looking for

  • MacBook Pro/Silver Keys/cleaning of the fans

    My "Silver key" Macbook Pro warms up and I see online there are a lot of videos to clean fan cooling, but not for money key Macbook pro units.  Is there a node where I can see how to do that my system?

  • Scan to PDF doesn't work don't not with J4680 all-in-One

    I can't get the scan to searchable PDF (PDF and PDF) file to work as expected with my new J4680. It works very well with other formats (TIF, JPG, etc.), but not with the PDF. It scans well request for additional pages correctly, and then try to creat

  • dv6240ea - no disc restoration, fried hard drive

    where can I get for HP Pavilion dv6240ea recovery disk because HP sell more?

  • No devices under Max

    Hello again everyone. I looked through the other posts and have tried all suggested without a bit of luck. (other that a complete uninstall, re - install) I'm forced by my Department to upgrade systems to Windows 7 64-bit and a computer Lenovo ThinkC

  • Impossible to burn to disc

    Although he is able to do in the past, I am now unable to burn to disc. My drive will read disks, snatch them from the library (WMP) and read data disks to add programs, etc. However, when I try to burn to a disc, I got major problems. I go through t