VSphere ESXi4.0 - need help upgrade and increase the size of disk to the server

Similar Questions

• Need help: error communicating with the server on boot up

  Anyone an idea what server it could be? I received this alert after starting my Mac Pro (OSX 10.7.5):

  He didn't identify which server, what app or anything like that. I wonder if I should do a virus check. If someone things

  can a good idea, it's been so long I've owned a virus app, anyone recommend some?

  Thank you

  Steven

  

  I don't know a good way to identify which application raised the dialog box, except via the menu bar.   If you have selected the dialog box, see if the name of the associated application is upwards in the menu bar.

  Otherwise...   What elements of openness are present?   System Preferences > users and groups > login items.    Except maybe iTunesHelper, hover over the name of the application to get the path to the application, and then delete the entries you do not use or don't recognize, please disconnect and reconnect and see if the prompt disappears.

  Otherwise, open Console.app from Applications > utilities and see if you can find a server connection error connected there.   There will be a lot of messages he and some will be pretty obscure or maybe even bad omen, and the deluge of text can be quite normal.   You are specifically looking for an error in Server connection with a timestamp at the time dialog box appears.

  If you can not solve this problem from the steps above, then download and run Etrecheckand post the diagnosis report here and maybe someone can spot a package that raises this dialog box.

  OS X 10.7.5 is quite far back that there may be problems to establish a secure connection, but it's a full proposal.  If your Mac allows, consider an upgrade to a newer version of Mac OS X.

  Antivirus and Anti-malware packages have a long and sordid and increasingly questionable history and its effectiveness lately - by the industry itself - was rather less than 50% (and I suppose, fall), and the software has caused more than a few problems with stability and reliability.   Most people with OS X get put into bags by installing malicious software themselves, or through the so-called phishing; try to get the user to install the malware, or open access to the system to allow the attacker to connect and install malicious software.

  Keep all Gatekeeper to allow only to App Store and identified the developers (System Preferences > Security and confidentiality), configure, and maintain Time Machine or another backup running tool and do not install anything you didn't pick.   I would probably also either disable or remove Microsoft Silverlight, Adobe Flash and Java from Oracle, or at least keep them current and get a blocker plugin, because these are some of the most common paths to the Junk onto a system, if it is not directly installed by the user.

• Need help to connect to the server of composer, in view, administrator

  I'm setting up a Horizon view 6 eval. The text environment will be low, and I want to use linked clones. The configuration is the following:

  5.5 vSphere hosts

  vCenter 6 (device) - not joined to the domain AD due to a bug VCSA 5.5 & 6.0 with the way my AD domain name is named; specifically, the domain name is ad. domain.net, but the name of Pre-windows 2000 is the domain

  View connection on Windows 2012 R2 VM

  View dial on Windows 2012 R2 VM

  Database SQL on separate server

  I followed the instructions in the eval guide and this blog to put in place: Horizon view 6.0 | Of Sean IT Blog

  All with the prerequisites and setup went well. I am now at the stage where I bind the connection to the server with vCenter and composer. The connection of vCenter worked correctly (using a local account that I created in vCenter for display for use with the permissions in a role). In the settings of the composer page, I keep getting an error "Unable to connect to View Composer." I am specifying the user account is the composer service account that I created in AD called vcmpSvc, which has permissions in AD create/delete computer objects and is also in the local Administrators group on the server of composer. I'm using the correct password, checked by connecting locally on the server of composer with the service account and by launching a command with the admin elevation prompt. I tried the following formats for the user name:

  vcmpSvc

  domain\vcmpSvc

  [email protected]

  In addition, the SOAP port was 18443 (unchanged from the default value) and the firewall is disabled on the server of the connection and the composer. What Miss me?

  Too bad! I solved it. It turns out that the composer on Windows Server installation has failed. Everything seemed fine, but when I looked in the list of services in order to check that it was starting well, I saw that he was missing completely. I installed new composer and everything works perfectly now.

  I hope this helps someone!

• Accidentally, I purchase an upgrade when I was trying to buy Acrobat Pro. I need help in Exchange for the upgrade to what I need.

  I can't find a certain number of support the customer to solve this problem.

  You can contact the Support from Adobe using link below:

  Contact the customer service

  [Click on always need help button and select the Chat option]

• What role must be installed and configured the server MRS

  Hi friends,

  What is the role for the domain user account Windows is needed to install and configure the server MRS?

  Should the area of employment must be the local administrator of Vcenter serere?

  Thank you

  Hello

  According to the MIS Program administration guide, you must be administrator to install SRM.

  In addition, my experience on Windows 2008 R2, you must click on the installer and choose "Run as Administrator", otherwise intallation process will be blocked.

  Michael.

• I need to download and improve the tools of the DPS. My version of InDesign CC 2015 isn't tools DPS that I need. I just upgraded to CC 2014 and found that (generator of folio) tools are missing. Can someone help me?

  I need to download and improve the tools of the DPS. My version of InDesign CC 2015 isn't tools DPS that I need. I just upgraded to CC 2014 and found that (generator of folio) tools are missing. Can someone help me?

  I have a new MacBook Pro 15 "with all of the memory/speed I need to work on folios. I am developing several folios.

  Downloads fail in case of success or not, do not load the Folio Builder I'm use to.

  Paul

  Post edited by: Neil Enns, edited to remove personal contact information.

  DPS is not supported in InDesign CC 2015. You will need to install InDesign 2014 CC-by-side to use DPS tools, that you have used. See download and install Adobe Creative cloud applications to learn how to install the previous version of InDesign.

  Digital Publishing Solution (aka DPS 2015) is supported in InDesign CC 2015.

  Neil

• I really need HELP! I received the nugel.exe virus on my laptop and I really missed the whole system! PLEASE HELP ME SOLVE THIS!

  I really need HELP! I received the nugel.exe virus on my laptop. I have Windows XP and I was reading how to remove it. They told me to go to click on the Start button in it, then click on run. type msconfig and on the Startup tab, uncheck everything that ends with TSSD. Well, none of which ended in TSSD was there, so I was told everything that had an UNKNOWN manufacturer in buttons SERVICES and STARTUP uncheck. I restarted my computer and the NELSON was always there.  Then suddenly my computer shut down on its own and restarted with a screen that says now "Windows didn't start because the following file is missing or corrupt: \system32\hal.dll .» Please reinstall a copy of the above file. "Does anyone know how to do this? I feel that I've dealt with the virus stupid for days and I'm going crazy! Can someone please help me solve what I did wrong? PLEASE, I BEG YOU!

  Hi ehaze64,

  Looks like you have made incorrect changes in system configuration utility.

  See the Microsoft articles below to solve the problem by installing the recovery console and use the Bootcfg.exe tool to rebuild the Boot.ini file.

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

   

   

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

   

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  http://support.Microsoft.com/kb/330184

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Adobe muse working on a menu lighbox and need help I can not the box of active relaxation, even if I checked trigger on top

  Adobe muse work on a menu lighbox and need help I can not the box of active relaxation, even if I checked trigger on top anyone with a suggestion?

  Thank you, it ends up being a superposition problem, thank you, but I can see where an invisible element could be a problem too. I use to select it all the trick to understand where I've been in Illustrator all time years ago I am so new Muse that I kept thinking can be as simple as I can go back to things I've done in other Adobe programs, but it is! and I'm an old school Print Designer who doesn't REALLY know the thing no coding thank once again

• Hello! I need help! I have the dvd for lightroom 5 and when I put it in my cumputer it dosent see DVD... What can I do?

  Hello! I need help! I have the dvd for lightroom 5 and when I put it in my cumputer it dosent see DVD... What can I do?

  You can try to download instead of using the drive...

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

  The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
  the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
  Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
  and show disabled devices - check your micro - highlight them, then lower right properties. Do
  of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
  and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad.

  I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad and the modem is a construction in one. would appriciate ay help

  Hi bardhiboris,

  You can follow the steps from the link below: set up a wireless network:http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

  Other links, please refer to: 10 tips to help improve your wireless network:http://www.microsoft.com/athome/setup/wirelesstips.aspx

  To set up automatic wireless network configuration:http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Officejet Pro 8600 Plus: I think I need to uninstall and reinstall the printer

  My printer started to print only if I turn it on, then go back on it.  I think I need to uninstall and reinstall the printer.  I have the CD, but not sure of updates.  This all started when my cable company came out to solve my problem of modem and saw that I was running my wireless printer.  He said that I should never do that, so I went back to USB.  When I did, the printer would not analyze.  I've switched back to wireless, but now I have the power problem.  Help!

  Hello

  Try the procedure described in this doc connecting the printer after change of your wireless network.

• BlackBerry smartphones, I can't enter Thai language. How can I upgrade and choose the operating system for my BB9900?

  How can I upgrade and choose the operating system for my BB9900? I need thai input but on the site of H3G Italy software download is not all the language version. I don't know from which site to download.

  Hi niranaja

  If your device is running always on OS 7.0 then try 7.1 any Pack OS carrier that also supports Languages.But of Southeast Asia before opening your computer and uninstall any previous packs if installed OS on it. After that, try this:

  1. download and install on your PC a pack OS with any language by carriers

  • (Make sure you download for the same phone model)

  2. download and install the latest version of BlackBerry desktop from here BlackBerry desktop software software

  Then using software office perform your full backup of your device.

  3. search your drive C: Vendor.xml and delete them, there may be one or two vendor.xml (on changing your Pc folders option to show the hidden files/folders ):

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\Windows UserName\AppData\Roaming\Research in Motion\BlackBerry\Loader XML

  4. go into C:\Program Files Research In Motion\AppLoader. (For Vista or Windows 7 64-bit, the path will be C: > Program Files x 86 > common files > Research In Motion > AppLoader) double-click on Loader.exe.

  Upgrade will continue then after Installation of the new OS restore your BlackBerry Desktop backup

  Software.

  Once done open BlackBerry Desktop Software (7.1) > select Applications. > in the section of language and support for entry , select the language to be added to the BlackBerry smartphone (a + will appear next to the language to install) > click apply.

  KB13067 : How to get smart BlackBerry phone language packs.

  So please try it and let us know.

  Prince

  _____________________________________________________________________________

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• What photoshop do l need to reduce or increase the pixels of the picture

  What photoshop do l need to reduce or increase the pixels of the picture

  Any version of Photoshop or Photoshop Elements will allow you to reduce the size of an image

  No program that I know of photo editing there will allow you to ADD information (pixels) that is not in the original

  Example... get a ball and make a mark on the void/flat tip with a black felt marker... now jump the ball and see how the dark dense brand is stretched and broken

• Get-VMHost: you have changed the world: DefaultVIServer and global: DefaultVIServers system variables. This is not allowed. Please reset them to $null and reconnect the server vSphere.

  Hello world

  After the upgrade to PowerCLI version 5.1 however I can't run even the simplest command because it always ends up with the following error:

  Get-VMHost: you have changed the world: DefaultVIServer and global: DefaultVIServers system variables. This is not aRA. Please reset them to $null and reconnect the server vSphere.

  C:\Users\Albert\AppData\Local\Temp\7900df01-f6c1-48c6-ac1e-047dfff90fb6.ps1:1 tank: 11
  + Get-VMHost < < < <
  + CategoryInfo: NotSpecified: (:)) [Get-VMHost], InvalidState)
  + FullyQualifiedErrorId: VMware.VimAutomation.ViCore.Types.V1.ErrorHandling.InvalidState, VMware.VimAutomation.ViCore.Cmdlets.Commands.GetVMHost

  Can someone please suggest to me how to fix the script for my v3.2.0 PowerGUI IDE can work with the latest PowerCLI in my computer laptop 64 bit Windows 7?

  Thank you.

  And I just tried with PowerGui (same versions of PowerGUI and PowerCLI you use), no problem.

  Must be something local on your desktop.

  Maybe try a uninstall/reinstall of PowerGUI?