VVID

Hello

Is it possible to assign a vlan voice dynamically in an interface via a radius server?

Best regards

Sergio

I'm sorry. I have corrected the link above.

This is an another doc, I hope you find it useful:

http://www.Cisco.com/en/us/prod/collateral/iosswrel/ps6537/ps6586/ps6638/config_guide_c17-605524.html#wp9000514

Tags: Cisco Security

Similar Questions

  • SG300 voice vlan problem with UC520

    Salvation of the Forumers

    My problem statement:

    -Secretary referred to topology.png, this is how my network like structure look

    -the IP phone after startup can not connect, so it cannot download the XML of UC520 configuration file. problem switching suspects.

    -my configuration illustrated in topology.png and my config show vlan as the voice setting.png voice vlan

    -My requirement is switch SG300 unique switchport to carry data VLANs and vlan voice.

    -What is the mode of connection for voice siwth VLAN an IP phone + data must be set up? is it switchport voice vlan vvid switchport voice vlan dot1p, switchport voice vlan unidentified or vlan switchport voice no further action over requirement?

    Thank you

    Noel

    Christmas morning,

    Sorry for the late reply, things have been very hectic in here lately

    1. Why use trunk? the UC520 don't have voice vlan (vlan 20)

    Do you mean that data THAT VLAN is handled by another device? Again I would like to leave as a trunk in order to manage the CPU through the data VLAN. (Except for security or other reasons you would choose differently of course)

    2. the UC520 got CUE (voicemail), how should I design the uplink service for the main switch module?

    Nothing in particular needs to be done for this, CUE is processed and routed inside the UC520, the vlan (default ID = 90) CUE is used if you have another LANDMARK in the network

    1. I guess I did: swithcport the tag vlan vlan unlabelled 20, 10. is it ok for this setting?

    If the Vlan on the switch and the UC520 voice has been defined as VLAN 20 (default value = VLAN 100) it's perfect. Check if the CPU and the switch, the voice VLAN ID is set to 20.

    1 so if I have just the phone to vlan 20 (vlan voice), create the policy of network LLDP?

    If you are ready to configure the VLANS manually on the phone, you don't need politics LLDP, thats right.

    Politics LLDP is used to having phones automatically choose the VLAN you set, so you do not need to set it manually.

    I hope that answers your questions?

    Best regards

    Nico glacier

    Senior Network Engineer - CCNA

Maybe you are looking for

  • Satellite T130 - file missing on USB

    When I plug a USB key with 22 files in my T130, seven only of the files is displayed.When I check on my desk, I notice the mising on laptop computer files were slightly "grey" in the directory. I am running Windows 7 Home Premium on the two machines.

  • Add a photo jpg to the body of an email

    How to add a photo jpg to the body of an email?

  • Pavilion Notebook: Windows Memory Diagnostic

    I ran Windows Memory Diagnostic a couple of times and it returns a message of hardware problems must be addressed by the manufacturer of the computer.  He said that when the diagnosis ends, there will be more information available.  However, the diag

  • HARD drive turn down after the time specified in Power Options

    I have the default settings for the hard disks in Power Options, I use the High-Performance option. http://img546.imageshack.us/img546/9219/capturesig.PNG but after the amount of time the disks will continue to work. When I had my previous Windows (H

  • Allow VPN users access a VLAN different

    I have an ASA 5505.  I have configured remote access VPN so that users can connect to the VPN and access my main VIRTUAL local network (inside).  I want to set so that when a user s in VPN, they are permitted access only to the CCV vlan (Vlan 2) as s