vWLC 8.0.120 worm

Similar Questions

• ISE as a accountant Server

  Hello

  I installed 1.4 with vWLC 8.0.120 ISE, and I want to set up a scenario of hotspot for guest users.

  Insofar as everything is ok and our guests users connect via the hotspot page.

  Before installing ISE I Mikrotik routerboard as AAA server, and mikrotik was server type of accounting and our gateway to the internet.

  When we use ISE:

  1. what must be our gateway to internet? you know he put as a default gateway for guest users?

  2. what accounting information been considered

  Thanks in advance.

  I would look using the roles of guests maybe instead.  You can create those navigating on your WLC to Wireless-> QoS-> roles.

  wlan_guestrole.PNG

  

  Then, in the authz ISE profile, you could call it:

  ise_authzprofile_guestrole.PNG

  

  I haven't used this method on a customer network, come in my lab.  The method that I mentioned earlier has been in production on customer networks.

  With the vWLC, you should use local switching, so it should be ok.  Or, if you use an anchor WLC in the demilitarized zone, then your user limit is based on this platform WLC.

  Tim

• I have an acer v3 771 with 2 HDD. Now, I put windows on a ssd 120 GB 10. With only the ssd begins worm

  Hello.

  I have an acer v3 i3 771. With 2 HDD, one with w8.1

  Iupgraded to 1 ssd 120 GB with own w10.

  Ver very fast, very well, but when I put a hard drive formatted in the 2nd support., I see the hard drive in the bios, acer starts normally but win I donnot see the hard drive. Of course I see th ssd.

  Can someone help me.pse.

  Guy van der velden

  OK, I saw the pictures, SATA HDD0 takes precedence, so any SSD is here, it will give the list only HDD0.

  It's strange but...

  the SSD 2 have the same content?

  It is not a sure way to start under UEFI, since that will be managed by the windows Boot Manager.

  Incidentally I would update of the BIOS to version 2.28:

  http://global-download.Acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_2.28_A_A.zip?acerid=635273377786893421&S...

• Get some APs to join a vWLC large-scale which replaces a small scale vWLC

  Hello everyone. I'm in a bit of a dead end. Here's our situation:

  • We have two vWLC on a small scale (.210 et.211), each with 200 AP licenses max. They are both on the 8.1.120.0 version.
  • vWLC.210 is maxed out et.211 is halfway there, as far as APs go. All APs are AIR-CAP702I-A-K9.
  • We recently bought APs more, but it was unclear, these APs are now 702i-B, which works with a newer version.
  • We were already looking to upgrade le.210 to a vWLC on a large scale, but ran into problems (error attached screenshot) and for some reason any could not do.
  • I was on vacation (a week or more), came back and my colleagues have already implemented a new and large scale vWLC, running version 8.2.111.0. His IP est.212.
  • So now what we're trying to do is to have the + 300 APs connect a.212 the most effective way possible.
  • One way that we figured out to hover over an AP has been put by default, but it would be horrible.

  At this point, we are eager to have a single virtual controller (large scale) for all the APs. If someone managed to upgrade small-scale (version 8.1.120.0) large scale (version 8.2.110.0), which would definitely be the way to go. I couldn't get this error with our support team.

  If we cannot go from small to large, then the second option could migrate their all new, large scale (. 212) controller. What would be the best/effective way to do.

  Thank you

  I just deconnecter.210 the network vWLC and edit the new vWLC at the same IP address (. 210). In this way, all of your AP must register with new vWLC.

  If you intend to use these vWLCs, you need to change the PDC of each AP (under AP config - tab that high) to new vWLC name & IP management. You can do this via vWLC CLI as well. If you get all the details of your AP, you can prepare your config in Notepad & applied only once. (first test & make sure it works for you)

  (WLC) >config ap primary-base <vWLC_Name> <AP1_Name> <vWLC_mgt_IP>(WLC) >config ap primary-base <vWLC_Name> <AP2_Name> <vWLC_mgt_IP>.(WLC) >config ap primary-base <vWLC_Name> <APn_Name> <vWLC_mgt_IP>

  HTH Rasika * Pls note all useful responses *.

• worm virus on chrome

  I have a virus worm on chrome. Can U help me to destroy it...

  Try to disable/remiving unknown extension.

  Chrome > settings > Extensions

• model MB565ZP Version 2.0.1 120 GB what generation?

  iPod classic 120 GB

  Model: MB565ZP

  Version 2.0.1

  S. n.: 8K914BPG2C7 - to which generation does this belong?

  It is a 7th generation iPod classic.

  (144899)

• How do you install 240 GB of music on iTunes to transfer to two 120 GB iPods?

  How can I do this?

  attach the iPod and click on its icon in the iTunes window.

  Choose "manually manage music and videos".

  then drag and drop the value of 120 GB of data approximalty to iPod

  Repeat steps.

• Lose or damage received the content of the e-mail, can see the fault once then apparent on refresh. worm 38.4 on 64-bit Windows8.1 / thank you

  Thunderbird worm 38.4/8.1 windows 64 bit
  Emails in the Inbox display content on the first reception. During subsequent attempts to display the message content can be completely empty or the contents of another adjacent email in the list. This seems to have started at the time that Norton detected and quarantined a couple of emails with identified the virus attached.
  After you run the full system antivirus scan I backed the content of the 789abc987.default of profile to backup taken yesterday. Now new emails coming to see the same problem, so that up to this older email display correctly.

  Unfortunately it doesn't seem wise to disable antivirus because in business, even if you wait for an attachment and you know the source, the technical capabilities of the source is not always known.

  I suggest to disable antivirus. Indeed, it would be a bad choice.
  The point is not to analyze the attachments so that they are still part of the e-mail message.

  Some form of holding directory which allow scanning prior to arrival in the mail app would be nice

  I don't know what you want to achieve by doing this. Yet once, any malware eventually joined an e-mail won't hurt as long as you do not deliberately open or run the attachment.

  Save an attachment to disk and then let it scan by anti-virus would be a good strategy.

• How can I stay on zoom 120 all the time? It goes back to 100 and some Web sites in new tabs

  Between Web pages he keeps going back down to 100. Is it possible to set it to 120 between the tabs and Web pages?

  The zoom settings are on a per site basis.

  NoSquint {web link}
  NoSquint allows you to adjust the text-only and the full page
  (text and images) zoom and color settings levels
  both globally (for all sites) and by site.

• Firefox always opens at 120%. How can I change this permanently?

  When I open Firefox, the zoom is still at 120%. How can I change this permanently?

  Hi, try to change the zoom level (Ctrl and + key, or Ctrl and - key). - The font size and zoom - increase the size of the web pages.

  Note: It is possible that your NoSquint extension is changing the default operation, if so, either turn it off, or look at settings - modules Manager Ctrl + Shift + A.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• Airport extreme wired to my xbox, one I have 1 gig of internet but only put 120 megabits

  We went right at 1 gig of internet and my xbox one connected to the router using a cable ethernet capable after the opening of teredo tunneling and change address mac my xbox we still don't receive on average 120 Mbps.  Anyone have any ideas on how to get more speed out of it?

  Thank you!

  What extreme model do you have?

  Have you tested by plugging the Xbox directly into the modem?

• PIN button installed but is not display or work. With the help of worm 40.0.3

  I installed Pinterest pin add-on, but the button is not on a toolbar so that I can use it. I'm on a Mac using Yosemite 10.10.5 with worm 40.0.3 of Firefox

  The bookmarklet works. I leave it on the toolbar for the moment. Thank you

• Since worm 36 and perhaps earlier, I have bookmarks under the stars, but not when I ask to show all bookmarks

  by clicking on the bookmarks on the home page gives me my favorites
  I have bookmarks under recently and unsorted bookmarks. I can move from these categories to the master list without problem.
  When I click on show all bookmarks that I get none. He goes to this screen but shows no Favorites.
  I would use these bookmarks on another computer, but also change in show all.

  second problem, my norton toolbar does not load and has not since worm 36

  When you click View all bookmarks to launch the dialog box library, normally, you see three categories listed on the right side. If you double-click in any of the categories, you will find actual bookmark listed there or empty each category?

  To transfer bookmarks in Firefox on another computer, there are two different file formats. I suggest to create two in case one does not work:

  • "Backup" format: restore bookmarks from a backup or move them to another computer
    • On the receiver Firefox, use Restore. He will wipe away all the existing bookmarks in Firefox receiver.
  • Format 'Export': Export Firefox bookmarks to an HTML file for backup or transfer bookmarks
    • On the receiver Firefox, use Import (import bookmarks in an HTML file). You usually have to reorganize a folder 'Imported bookmarks' (or the Unsorted Bookmarks category) at the desired locations.

  Symantec is usually very quick with updates to date, but it might be a little early for 40 of Firefox (beta version). There is a release supporting 39 Firefox: https://community.norton.com/en/blogs.../firefox-39-support-norton-toolbar. Users report that you sometimes have to run LiveUpdate several times to get the last toolbar into Firefox.

  If you had accidentally on the way to the beta and prefer to have the support of Norton toolbar in good time, you can install the retail version (39 Firefox) and it should work seamlessly with your existing settings.

  It wouldn't hurt to do a backup first. You can find suggestions in this article: back up and restore the information contained in the profiles of Firefox.

  Then do the restore:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (1) download a fresh Installer for Firefox 39.0 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (2) close Firefox (if applicable).

  (3) to rename the program folder, either:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\OldFirefox
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\OldFirefox
  

  (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

  You can get to the Options page?

  Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:

  • \OldFirefox\Plugins
  • \OldFirefox\browser\plugins

• Where did you "location of Menu: tools | Options | Advanced | Read and display"go? 38.1.0 worm

  The messages for viewing with worm. 38.1.0 have the 'From', 'subject' and 'To' no way I see to display "go."

  Go to add it to the page and get the new Compact header version.

• Can not find the registration for worms code after loading assistance down got the new computer

  Old computer broke down, code assistance from loading down recording lost for worms. How can I get old a return

  Contact their support site.