vWorkspace 8.0.1 Linux deployment

Similar Questions

• vWorkspace with Novell eDirectory

  Hi all

  VWorkspace can be proposed and deployed in a unique environment of Novell eDirectory? I came across these 2 post http://en.community.dell.com/techcenter/virtualization/vworkspace/b/vworkspace-blog/archive/2012/07/19/qwdv-vworkspace-7-6-feature-spotlight-user-profiles-in-novell-environments andhttp://en.community.dell.com/techcenter/virtualization/vworkspace/b/vworkspace-blog/archive/2010/09/28/temporary-client-assignment discussed both on user profile management and virtual office assignment for Novell environment. What concerns me, is the provision of virtual offices, because I think that part of the process will attempt to reach the office configured in Active Directory. Would it still work if Active Directory is non-existence in a Novell environment? Of other "witch hunt" or limitations that you guys met in the application vWorkspace in a pure Novell environment?

  Thanks for any advice in advance

  Kind regards

  Cyril

  Hi Cyrill

  "Can vWorkspace be proposed and deployed in a unique environment of Novell eDirectory?

  short answer: no

  I have install vWorkspace 7.6. desktops for Novell to logon.

  In my setup the Machines (Hyper-V, vWorksapce broker, office computers) are deployed in AD.

  The InstantProvisioning Service on the needs of the virtual office AD joined computer objects. I Recomment InstantProvisioning on Sysprep. Changes to the Master model I have just started the master of the domain joined to make changes and make a "slmgr.vbs /rearm' new import model - stop - that's all. No sysprep or anything here.

  How then to provide Novell to logon for users?

  They need to connect with vWorkspace - there will be a commercial or Windows account local (Version 7.6). I use a local model Windows account on the Machine broker vWorkspace and pre-fill the identification information in the Web Site of WebAccess.

  I will not use the fake account of Windows for Office Access because this could lead to Sessions exceeded in the worst case.

  To achieve this:

  I disable pncredprov.dll on desktop

  Configure computers to use the RDP security layer - this will bring up the Interactive home for logon screen.

  Real logon is done by a combination of pgina.org and the Novell Client. Page provides LDAP authentication, and creates a local user of Windows on the desktop. Novell Client in passthrough mode will make Novell authentication - seemless to the user.

  In this case we don't need user profiles. Instead, I use a "pre-defined" for the newly created user profile. Configure computers to return to service after logout - it's one thing to go simple.

  vWorkspace 8 with 'anonymous' functionality could be useful. I think that AD is always necessary for computer accounts and InstantProvisioning.

  Best regards

  MArkus

• Deploy the debugging token: no route to host

  I'm using Linux, deploying a token of debugging on a BlackBerry Z10.

  The mode of development, the dev what IP posted on the parameters is 169.254.1.1

  I use the following command: blackberry - deploy - installDebugToken debugtoken.bar - device 169.254.1.1 - password

  And I have the following output:

  Error: Unable to connect: no route to host. Check the settings of IP address for the target. Try to ping the target.

  I can't ping the device from the device using a 169.254.x.x network, unfortunately I am using a 192.168.1.x network.

  I have no firewall, no VPN and the unit is plugged in USB.

  169.254 network cannot be changed on the unit.

  I tried to force my Linux network config, so that I have the following text:

  # ifconfig

  eth1 Link encap HWaddr 00:10:18:31:68:60
  INET addr:169.254.1.2 Bcast:169.254.255.255 mask: 255.255.0.0
  ADR inet6: fe80::210:18ff:fe31:6860 / 64 Scope: link
  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1
  Fall of RX packets: 182264 errors: 0:0 overruns: 0 frame: 0
  Dropped packets: 106368 TX errors: 0:0 overruns: 0 carrier: 0
  collisions: 0 txqueuelen:1000
  RX bytes: 190168290 (190.1 MB) TX bytes: 21806096 (21.8 MB)
  Interruption: 18

  But still, I can't ping the device...

  What did I miss?

  It seems that the device is properly connected to your computer, and networking has been correctly configured. However, the messages that you have found, and the lack of support of ping suggests there is still a network problem prevents you from reaching the unit.

  Did you set it to 'Storage and access' mode 'Windows '? "Windows" mode is RNDIS, which works perfectly and 'Mac' mode (and perhaps her detected) are ECM and has some problems with some linux configurations.

  You can reach the exit of "route ip get 169.254.1.1"? For my part, I see

  169.254.1.1 dev usb0 CBC 169.254.1.2
  cache

  Your network (192.168. *) should not affect your debug configuration, unless your network is a 169.254. * network.

• deployment of static html files (for the documentation of the application)

  I'm developing with forms 11g for windows and linux deployment.

  I want to deploy my application help documentation, I've already migrated from hlp to html / css.

  Now, I would like to know where I can deploy only the html files to invoke with web.showdocument (for example).

  What relative path of the url in the web.showdocument is built in?

  I can the jar as I did with the icons?

  OK, thanks anyway,

  The problem is with my setup of weblogic, because it is a windows developer position.

  I will send instructions to the sysadmin and try to do it in linux deployment server.

  I also tried with WLExcludePathOrMimeType, as read in the manual of this

  Note:

  When including those defined by the user aliasMatch with the prefix /forms/ in forms.conf , add the directive WLExcludePathOrMimeType . For example, under Linux, when you set the aliasMatch to /forms/usericons in forms.conf , the directive WLExcludePathOrMimeType is defined as follows:

  AliasMatch /forms/usericons/(..*) "/home/userx/myicons/$1" WLExcludePathOrMimeType /forms/usericons/
   
  

• Best practices running like a virtual Linux machine

  We are a boutique Wintel and decided to start looking to support Linux guests.  I have no real knowledge of linux and how it works as a guest operating system.  Are there recommended for installation, configuration and performance around Linux?

  I found a few documents (http://www.vmware.com/files/pdf/linux_install_config.pdf and http://www.vmware.com/pdf/vi_performance_tuning.pdf), but wanted to get some opinions of real life.  I also know that's a broad question, but what is the typical Linux deployed VM in regarding resources.  Would be a 2vCPU be 4 GB of RAM by default good installation? I know most of the answers will be 'it depends', but I'm a real novice with linux all suggestions and criticisms are welcome.

  Our environment:

  vCenter4.0.0U1

  ESX4.0.0U1

  2 8 nodes on IBM x 3650 M2 Intel x 5570 (16 processors, logical and 128 GB of RAM by)

  Emulex HBA connection to a Hitachi USPV

  More information can be provided, if necessary

  Thanks again!

  I also propose to use distribution supported (just to get support is that something goes wrong) and always install the VMware Tools.

  Do not use VMI on 32 bit, cause in the future is removed.

  You will also find a lot of tuning, like this:

  http://www.fewt.com/2008/06/performance-tuning-VMware-Server-on.html

  But I saw no difference, so I suggest to keep things simple and just install the VMware Tools, use supported distro, do good design VM (minimum number of vCPU, good Mem,...)

  Also note that Linux usually use vRAM in an aggressive manner (compared to Windows 2003).

  André

• EBS R12 - Win 2003 Server R2 Standard Setup error

  Hi Experts,
  
  It's my 8th attempt to install EBS R12 and got the same error.
  OS - Win 2003 Server R2 Standard.
  used CYGWIN, MS Visual C++ 2010 and Strawberry Perl.
  Used Oracle E-Business Suite R12 installation Windows XP steps followed all the steps... Finally even error...
  
  http://www.mediafire.com/?najx7zk8zl780x8
  
  in the link above, I've added all the screenshots of th and the log files.
  1. can I use MS Visual C++ 2010?
  2. can I use strawberries Perl?
  
  Can someone help me please... Please let me know if you need any additional info or any other file of log...
  
  Thank you
  DK

  I tried again, installation with perl 5.x and Visual c ++ 2008. And got the same error... think you can change the operating system from Win 2003 to Win 2008?

  It may be useful, but I can't confirm that, until you try the operating system.

  For the moment, I see two options-
  try to use oracle enterprise linux,
  Deployment Oracle VM model...

  I would recommend OEL.

  Thank you
  Hussein

• Problem with linux vWorkspace

  Hola
  
  Currently I have 1 server with IIS for Gateway , 2 Server for Brokers vWorkspace and 1 Server RDS
  
  By using vWorkspace connector from Windows I have no problem to connect to VMs or applications ( notepad for example). But since Linux only connection works VMs , applications show error "Failed TCP Connection "
  
  also I have a Dell Wyse SUSE 5010 and the same thing happens to me .
  
  Everything is mounted on Vmware
  
  What could be the problem?
  
  Thank you!
  

  NLA is enabled on the server RDSH?

• Could not deploy composite BPM soa Server 12 c (Linux)

  I'm trying to deploy a simple BPM on SOA (12 c WebLogic) server on a LINUX machine. The SOA server appears correctly installed (green in the EM console and I can access the server soa-infra).

  
  

  I get the following strange error when you try to deploy (windows or wlst maven plugin... JDevelopper)

  
  

  Error in JDevelopper:

  [17: 10:16] sending internal deployment descriptor

  [17: 10:16] send (archive) - sca_BpmProject_rev1.0.jar

  [17: 10:17] Server, the response code = 500 HTTP response was received

  [17: 10:17] error deployment archive sca_BpmProject_rev1.0.jar to partition 'default' on the server soa_server [http://10.2.1.22:7004]

  [17: 10:17] HTTP error Code returned [500]

  [17: 10:17] Error Message from the server:

  There was a deployment of the composite on soa_server error: cannot find the Motor Service of type 'implementation.bpmn '...

  Error with the maven plugin:

  [ERROR] Cannot run com.oracle.soa.plugin:oracle goal-soa - plugin:12.1.3 - 0-0: deploy (deploy by default) on the sca_BpmProject_rev1.0.jar project

  : - > response code = 500, error: there was a deployment of the composite on soa_server error: cannot find the Motor Service of type 'implementation.bpmn '.

  .. -> [Help 1]

  Anyone have any idea on this?

  I realized what the problem was: I forgot to install the model BPM in my weblogic despite the SOA model field has been installed (which made me think that everything has been properly installed because I had my operational soa_server1)

• How to deploy a rdf on linux with library report attached

  Forms and reports 11.1.2.1

  We develop on windows and deploy on linux.

  We work with rdf files, send them to linux and there they are functioning normally.

  Now, I have a file rdf with a library attached. I opened the file with the windows generator, compile all the save, he brings to linux, but at runtime, I get this error:

  REP-1247 will find no compiled plsql

  The plx is in reports_path.

  Do I have to compile the report to linux?

  I answer myself:

  If you want to have the rdf compiled at run time, you must have the available pll (the plx is not enough).

  So, if you don't want to deploy the pll, you will need to convert the rdf in rep (have the pll at hand at that time of compilation).

• Deploy application with GlassFish-JavaEE, move from Mac to Linux.

  On a Mac, I developed and managed a Java EE application successfully.

  It's an EAR with an EJB module and a Web module.

  Now continues on a device of Linux (Ubuntu), I can't start over exactly the same application. I got exacttly the same code with git.

  
  

  I tried to launch the application with:

  <

  asadmin deploy ejbEntities/target/ejbEntities-1.0-SNAPSHOT.jar

  >

  the console of administration in the r through http://localhost:4848:

  Applications /-> deploy snapshot.jar selection...

  
  

  And with Netbeans with all the same result:

  After generating with dependencies and running.

  He tells his running successfully. But in services server/glassfish Server/applications/nothing is displayed and the output is the server.log:

  <

  An exception occurred while loading the application: the EJB container initialization error

  com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Invalid destination jms/NewMessage for MDB: JNDI name not found

  at com.sun.enterprise.connectors.jms.system.ActiveJmsResourceAdapter.getPhysicalDestinationFromConfiguration(ActiveJmsResourceAdapter.java:2269)

  at com.sun.enterprise.connectors.jms.system.ActiveJmsResourceAdapter.updateMDBRuntimeInfo(ActiveJmsResourceAdapter.java:2095)

  at com.sun.enterprise.connectors.inbound.ConnectorMessageBeanClient.setup(ConnectorMessageBeanClient.java:168)

  to org.glassfish.ejb.mdb.MessageBeanContainer. < init > (MessageBeanContainer.java:252)

  at org.glassfish.ejb.mdb.MessageBeanContainerFactory.createContainer(MessageBeanContainerFactory.java:63)

  at org.glassfish.ejb.startup.EjbApplication.loadContainers(EjbApplication.java:221)

  at org.glassfish.ejb.startup.EjbDeployer.load(EjbDeployer.java:291)

  at org.glassfish.ejb.startup.EjbDeployer.load(EjbDeployer.java:99)

  at org.glassfish.internal.data.ModuleInfo.load (ModuleInfo.java:206)

  at org.glassfish.internal.data.ApplicationInfo.load(ApplicationInfo.java:313)

  at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:496)

  at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:219)

  at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:491)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl$ $2 1.run(CommandRunnerImpl.java:539)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl$ $2 1.run(CommandRunnerImpl.java:535)

  at java.security.AccessController.doPrivileged (Native Method)

  at javax.security.auth.Subject.doAs(Subject.java:360)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl$ 2.execute(CommandRunnerImpl.java:534)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl$ 3.run(CommandRunnerImpl.java:565)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl$ 3.run(CommandRunnerImpl.java:557)

  at java.security.AccessController.doPrivileged (Native Method)

  at javax.security.auth.Subject.doAs(Subject.java:360)

  at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:556)

  at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1464)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl.access$ 1300 (CommandRunnerImpl.java:109)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl$ ExecutionContext.execute (CommandRunnerImpl.java:1846)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl$ ExecutionContext.execute (CommandRunnerImpl.java:1722)

  at org.glassfish.admin.rest.resources.admin.CommandResource.executeCommand(CommandResource.java:404)

  at org.glassfish.admin.rest.resources.admin.CommandResource.execCommandSimpInMultOut(CommandResource.java:234)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:497)

  to org.glassfish.jersey.server.model.internal.ResourceMethodInvocationHandlerFactory$ 1.invoke(ResourceMethodInvocationHandlerFactory.java:81)

  to org.glassfish.jersey.server.model.internal.AbstractJavaResourceMethodDispatcher$ 1.run(AbstractJavaResourceMethodDispatcher.java:151)

  at org.glassfish.jersey.server.model.internal.AbstractJavaResourceMethodDispatcher.invoke(AbstractJavaResourceMethodDispatcher.java:171)

  to org.glassfish.jersey.server.model.internal.JavaResourceMethodDispatcherProvider$ ResponseOutInvoker.doDispatch (JavaResourceMethodDispatcherProvider.java:152)

  at org.glassfish.jersey.server.model.internal.AbstractJavaResourceMethodDispatcher.dispatch(AbstractJavaResourceMethodDispatcher.java:104)

  at org.glassfish.jersey.server.model.ResourceMethodInvoker.invoke(ResourceMethodInvoker.java:387)

  at org.glassfish.jersey.server.model.ResourceMethodInvoker.apply(ResourceMethodInvoker.java:331)

  at org.glassfish.jersey.server.model.ResourceMethodInvoker.apply(ResourceMethodInvoker.java:103)

  to org.glassfish.jersey.server.ServerRuntime$ 1.run(ServerRuntime.java:271)

  to org.glassfish.jersey.internal.Errors$ 1.call(Errors.java:271)

  to org.glassfish.jersey.internal.Errors$ 1.call(Errors.java:267)

  at org.glassfish.jersey.internal.Errors.process(Errors.java:315)

  at org.glassfish.jersey.internal.Errors.process(Errors.java:297)

  at org.glassfish.jersey.internal.Errors.process(Errors.java:267)

  at org.glassfish.jersey.process.internal.RequestScope.runInScope(RequestScope.java:297)

  at org.glassfish.jersey.server.ServerRuntime.process(ServerRuntime.java:254)

  at org.glassfish.jersey.server.ApplicationHandler.handle(ApplicationHandler.java:1028)

  at org.glassfish.jersey.grizzly2.httpserver.GrizzlyHttpContainer.service(GrizzlyHttpContainer.java:365)

  to org.glassfish.admin.rest.adapter.JerseyContainerCommandService$ 3.service(JerseyContainerCommandService.java:173)

  at org.glassfish.admin.rest.adapter.RestAdapter.service(RestAdapter.java:179)

  to com.sun.enterprise.v3.services.impl.ContainerMapper$ HttpHandlerCallable.call (ContainerMapper.java:459)

  at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:167)

  at org.glassfish.grizzly.http.server.HttpHandler.runService(HttpHandler.java:201)

  at org.glassfish.grizzly.http.server.HttpHandler.doHandle(HttpHandler.java:175)

  at org.glassfish.grizzly.http.server.HttpServerFilter.handleRead(HttpServerFilter.java:235)

  to org.glassfish.grizzly.filterchain.ExecutorResolver$ 9.execute(ExecutorResolver.java:119)

  at org.glassfish.grizzly.filterchain.DefaultFilterChain.executeFilter(DefaultFilterChain.java:284)

  at org.glassfish.grizzly.filterchain.DefaultFilterChain.executeChainPart(DefaultFilterChain.java:201)

  at org.glassfish.grizzly.filterchain.DefaultFilterChain.execute(DefaultFilterChain.java:133)

  at org.glassfish.grizzly.filterchain.DefaultFilterChain.process(DefaultFilterChain.java:112)

  at org.glassfish.grizzly.ProcessorExecutor.execute(ProcessorExecutor.java:77)

  at org.glassfish.grizzly.nio.transport.TCPNIOTransport.fireIOEvent(TCPNIOTransport.java:561)

  at org.glassfish.grizzly.strategies.AbstractIOStrategy.fireIOEvent(AbstractIOStrategy.java:112)

  at org.glassfish.grizzly.strategies.WorkerThreadIOStrategy.run0(WorkerThreadIOStrategy.java:117)

  in org.glassfish.grizzly.strategies.WorkerThreadIOStrategy.access$ 100 (WorkerThreadIOStrategy.java:56)

  to org.glassfish.grizzly.strategies.WorkerThreadIOStrategy$ WorkerThreadRunnable.run (WorkerThreadIOStrategy.java:137)

  to org.glassfish.grizzly.threadpool.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:565)

  to org.glassfish.grizzly.threadpool.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:545)

  at java.lang.Thread.run(Thread.java:745)

  Caused by: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Invalid destination jms/NewMessage for MDB: JNDI name not found

  at com.sun.enterprise.connectors.jms.system.ActiveJmsResourceAdapter.getPhysicalDestinationFromConfiguration(ActiveJmsResourceAdapter.java:2263)

  ... more than 71

  ]]

  [2015-06 - 01 T 15: 15:19.286 - 0200] [glassfish 4.1] [INFO] [] [org.glassfish.admingui] [tid: _ThreadID = 130 _ThreadName = admin-listener (6)] [timeMillis: 1433164519286] [levelValue: 800] []

  Redirecting to /common/index.jsf]]

  [2015-06 - 01 T 15: 15:19.301 - 0200] [glassfish 4.1] [INFO] [] [org.glassfish.admingui] [tid: _ThreadID = 132 _ThreadName = admin-listener (8)] [timeMillis: 1433164519301] [levelValue: 800] []

  [[Administration console: initializing attributes Session...]]

  >

  What could be the problem? The app has not changed, it is the environment.

  
  

  After that Googling autour, I found the problem had to do with the syntax.

  
  

  For example, on:

  http://StackOverflow.com/questions/7110563/GlassFish-v3-cant-deploy-MessageDriven-bean-missing-destination-JNDI-name

  
  

  I got the same error. The problem was:

  @ActivationConfigProperty (propertyName = "destination", propertyValue = "jms/SampleTopic")

  This need to be

  @ActivationConfigProperty (propertyName = "destination", propertyValue = "SampleTopic")

  
  

  Can whe´re I set this property?

  Whe´re is the configuration file of Glassfish?

  
  

  Could someone guide me through this?

  
  

  Thanks in advance.

  
  

  Peter,

  I found the domain.xml file. ~/glassfish4/GlassFish/domains/Domain1/config/domain.XML

  In this file, I wasn't able to find anything on the com.sun.appserv. *. packages.

  The software allows to work with this default file (on a Mac).

  With the asadmin terminal I tried to add custom resources.

  And they appear whe. After you restart glassfish no different result.

  The application deployment guide https://glassfish.java.net/docs/4.0/application-deployment-guide.pdf mentionned on glassfish ejb - jar.xml and ejb - jar.xml.

  I couldn't find these files for version 3.1.

  http://docs.Oracle.com/CD/E26576_01/doc.312/e24929/dd-files.htm#GSDPG00080

  But the app was capable on running with the default settings, so without these files.

  What can I check next?

• EPM 11.1.2.3: deployment of java web applications on environment Mix Linux and windows

  Hi all

  I intend to install and configure EMP 11.1.2.3.

  We have 2 of linux and windows server 1.

  on linux, I am planning to install foundation, Essbase and planning.

  and in windows I intend to install HFM and FDMEE.

  now my question is when you perform the configuration for HFM and FDMEE, I need to deploy the java web application for HFM and FDMEE on windows.

  so everything by deploying web applications in java on windows that I put a different name for "domain name".

  as linux domain name will be 'EPMSystem', so for windows it would be different as 'EPMSystem1'.

  There will be no problem if the domain names are the same for both linux and windows?

  
  

  and for weblogic server port must be different as 7001 on linux and 7002 on HFM?
  

  
  

  Kind regards

  Dattatray Mate
  

  

  Yes, please keep another domain name...

  Port is not a problem, you can use the same port as well

  See you soon!

  SH! going

• Hi everyone, I want to formsweb.cfg deployment forms 10g Linux PLZ

  In my business, we changed all the clients for Linux (Ubuntu) but still Windows Server OS, I want to deploy forms 10 g on the client PC, but I do not know the modifications needed to formsweb.cfg

  This has nothing to do with Linux; 10 gr 2 forms just does not work with JRE7 (or newer) by default.

  I'm not the exact patchlevel you but to obtain forms gr 10, 2 running with JRE7 and higher, you will need to ask the last group of patches 10.1.2.3 and the latest patches of all sheets. In order to get them, you need a support contract to download from MOS (support.oracle.com).

  Note that even if it will work with the latest patches Forms 10 g 2 is not certified with Java7 or Java8.

  If you do not have a support contract so the only chance you have is upgrade to the latest forms - 11.1.2.2.

  see you soon

• Hyperion 11.1.2.3 Linux based components of server deployment and windows system

  Hello

  I'm new and this is perhaps a delicate question.  I am trying to wrap my head around this idea, is it possible to correctly install Hypeiron planning on linux? The hyperion java web application and especially the services of the Foundation can be installed under linux.

  However some server such as the dimension epma server components can only be deployed on windows. What this means is optimal only installs Hyperion Planning on windows servers? To keep all components on a single server? There are stories where some parts of Hyperion was deployed for linux AND windows?  There was a small section in the installation guide of PMC 11.1.2.3 on page 151, but we didn't know about how windows and linux would work together.

  Let me know if I need to clear up any confusion about my question.

  Thank you!

  Hyperion works in mixed mode OS. For the deployment of Web applications, you must deploy all on Windows or Linux.

  On page 151, its about HFM. If you have HFM as the source for the FR or Web analysis reports, you must install & config HFM, EN/WebAnalysis under Windows to create the new Weblogic domain.

  If you do not have HFM in your deployment, you need not worry.

  Kind regards

  Santy

• All trying to deploy Linux VM model using PowerCLI, during customization in error that "do not provide dns when you create NIC mapping for customization with type 'Linux" ".

  All trying to deploy Linux VM model using PowerCLI, during customization in error that "do not provide dns when you create NIC mapping for customization with type 'Linux" ".

  See my response on the other thread where you posted the same question.

• Agent deployment of MS 12.1.0.2 to pre - req Linux by the agent checks

  Deploying the agent software from EM to a Linux host running Oracle Enterprise Linux version 5.8 I am one of the sine qua non default check which indicates that the root / does not belong to the root. Since the Setup log
  
  INFO: --------------------------------------------------------------------------------
  INFO: Checking AgentBaseDirCheck
  It is a prerequisite to check if the agent home directory belongs to the user to install, all parent directories belong either installation user or root user and the root directory (i.e. "/") is the property of the root user.
  INFO: The value of AGENT_BASE_DIR is: / opt/EM_Agent.
  INFO: The value of ORACLE_HOME is:/opt/EM_Agent/ADATMP_2012-12-10_09-37-31-AM/prereq_stage/core/12.1.0.2.0
  INFO: The command get executed under this prereq is:/opt/EM_Agent/ADATMP_2012-12-10_09-37-31-AM/prereq_stage/core/12.1.0.2.0/perl/bin/perl /opt/EM_Agent/ADATMP_2012-12-10_09-37-31-AM/prereq_stage/core/12.1.0.2.0/sysman/install/CheckDirPermission.pl/opt/EM_Agent
  NEWS: Check the appropriate property on the base directory of the agent.
  INFO: Check if the base directory of the agent is owned by the oracle user agent and that its parent directory is owned by the agent user or root.
  INFO:...
  INFO: User name is: oracle & file owner is: oracle
  INFO:...
  INFO: ERROR: the root directory is not owned by the root user.
  INFO: The full version. The result of this review is: failure of < < < <
  
  INFO: --------------------------------------------------------------------------------
  
  Don't know how the / can not be owned by the root.
  
  Size of filesystem used Avail use % mounted on
  / dev/map/VolGroup00-LogVol00
  220G 63 146 G 30%.
  / dev/sda1 99M 23 M 72 M 24% / Boot
  tmpfs 2.0 G 620 M 1.4 G 32% / dev/shm
  
  
  [Mapper root@tomintoul] # ls - al
  Total 0
  drwxr-xr-x 2 root root 100 4 Dec 11:42.
  drwxr-xr-x 13 root root 7180 Dec 10 06:59...
  CRW - 1 root root 10, 62 4 Dec 11:42 control
  BRW - rw - 1 root disk 253, Dec 4 0 11:42 VolGroup00-LogVol00
  BRW - rw - 1 root disk 253, 1 Dec 4 11:42 LogVol01 VolGroup00
  
  
  Any help would be appreciated.

  Hello

  Please follow the provided below document that explains the problem.

  EM 12: Agent Installation fails with the error "the root directory is not owned by root user" (Doc ID 1380296.1)

  Kind regards
  Vincent