W500 forgets that it is connected wireless

Similar Questions

• LaserJet MFP M277c6: LaserJet MFP M277c6 will not connect wirelessly to my Mac

  When I run HP Easy Start it says that no devices were found.  And when I run the update of the HP Firmware finds it too never unit.  The printer indicates that it is connected wireless.

  My Mac connects to my old Epson printer very well.

  Help!

  If there is no printer listed, this means that there is a setting on the network to which the printer is having a problem with. To resolve this please contact your internet provider or one that handles the router and ask them to do the following:

  1. Open all ports.
  2. Select multicast.
  3. Disable MAC filtering/MAC cloning.
  4. Disable the network of comments.
  5. Make sure that the network has a band of 2.4 GHz (gigahertz).

  Please let me know the results after these parameters controlled.

• How can I change my connection Wireless to cable?

  Hello

  I bought a new PC, and during the installation, I accidentally clicked 'connect wireless' instead of being wired. At least once a day, my wireless connection "resets", which would normally not be a problem if I just surf on the ' net, but I play video games online, and it disconnects me from the game server. Sometimes, it becomes very annoying.

  I don't know where to go on my computer to change the settings for wireless for hard cable. I am currently connected to the router via a cable as well, but it always shows that I'm connected wireless.

  Can anyone help? Thanks in advance.

  Hello

  These should help:

  Wireless Network - connect to or disconnect in Windows 8
  http://www.eightforums.com/tutorials/37737-wireless-network-connect-disconnect-Windows-8-a.html

  How to enable or disable the Wi - Fi Windows 8 and 8.1
  http://www.eightforums.com/tutorials/41506-Wi-Fi-turn-off-Windows-8-a.html

  How to enable or disable a NIC (NIC) in Windows
  http://www.eightforums.com/tutorials/37681-network-adapter-NIC-enable-disable-Windows.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Using of Windows 8, need to remove outside wireless connections that interfere with my wireless connection - unable to do

  Two unwanted connections always connect, and I guess they are somewhere in the neighborhood.  'Delete' never appears, I read means that they have security blocks are not actually using my computer.  However, they interfere in some way because whenever I have remove control of these two connections and click on mine, they come immediately with the checkmarks.  Therefore, the Explorer, "you are not connected to the internet."  Quite frustrating.  Sure that if I use explore 9 or 10, as note am access to explore my office rather than splash screen.

  Link in double wire and content:

  http://answers.Microsoft.com/en-us/IE/Forum/IE10-windows_8/need-to-delete-outside-wireless-connections-that/3413ce5b-400C-4C83-9cab-6fd54d13e1e6

  need to remove outside wireless connections that interfere with my wireless connection - unable to do.

  2 outside wireless users interfere with my wifi connection. Cannot remove them. Today, my wifi was totally blocked on Windows 8 with an asterisk in addition to the wifi icon. Finally, shut down the computer for a while, started again and immediately accessible all 3 networks and disconnected two parasites. However, computer won't let me remove them entirely (i.e., no ' delete'). Is there a way to do it - makes me crazy? One person suggested access "Manage network connections", but couldn't find where, he said, it would be. Thank you.

  Hello

  Thanks for the reply. Refer to these methods and check the status of the issue.

  Method 1:

  a. open the charms bar, click/click on settingsand then click / tap on the Network icon.

  b. click right , or tap and hold on the wireless network (ex: Brink-router) in the list of networksand click/click on forget this network.

  Note: Windows does not provide the option 'Forget this network' if there is a profile high-speed Mobile which is supplied by the carrier. The option appears only when a custom or user profile is created.

  Note: 'Forget this network' is not available for networks wireless listed that not create you a network profile for.

  Method 2:

  Alternatively, you can refer to this method:

  a. press the Windows and X keys .

  b. click on (Admin) command prompt.

  (c) in the command prompt, copy and paste the following command and press ENTER.

  NOTE: this command will give you the list of all profiles of wireless network on your PC.

  netsh wlan show profiles

  d. in the command prompt, type the following command and press ENTER.

  NOTE: this command will delete the wireless network profile.

  netsh wlan delete profile name = "WirelessProfileName".

  For example, if I wanted to delete my profile from the 7shp (name) listed wireless network, I must type the following command exactly.

  " netsh wlan delete profile name = ' ' 7shp '

  e. close the command prompt and check the status of the issue.

  I hope this helps.

• My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  Hi Mpsfeldt,

  Thank you for using communities Support from Apple!

  Your question, it looks like you are only able to use AirPrint sporadically. We know that situations of this kind can be frustrating, but we are here to help.

  To begin the process of solving problems, I suggest you to read about the section If you can not print on your printer AirPrint in the following article.

  On AirPrint - Apple Support

  Best!

• You can use your apple TV without an internet connection?  If so, how do install you it?  I have currently basic cable and that you have a wireless router.  Thank you

  You can use your apple TV without an internet connection?  If so, how do install you it?  I have currently basic cable and that you have a wireless router.  Thank you

  What you want to do with the ATV without an Internet connection?  It is designed as a device of Internet broadcast, so you can access online content via the big screen in the living room rather than the pocket computer in your pocket...

  technically I think its possible but you would still need an Internet connection for the installation and update of the software process and even less to download applications and games, but if you don't have an Internet connection apps/games will probably not work. I don't think that there is 'out of play'...

• My HP Pavilion Entertainment PC will not communicate with my printer HP 309g. Suffice to say that they are connected to WIFI. I have tried wireless and connected.

  My HP Pavilion Entertainment PC will not communicate with my printer HP 309g.  Suffice to say that they are connected to WIFI.  I have tried wireless and connected.

  GR

  Since they are both HP products you the best solution is to talk to them...

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Wireless printer Lexmark X 4850 and a netgear router that does not connect while I can print

  Rookie PC user...

  I have a Lexmark X 4850 wireless printer and a netgear router that does not connect while I can print ggggrrrr....!
  I checked all plugs and connections, the reboot several times and am about to throw it out the window... Help!

  Hello

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like the wireless Lexmark X 4850 printer is not to connect to the wireless router.

  Visit this link that should help you with this problem.

  http://support.Lexmark.com/index?page=content&ID=FA697&locale=en&UserLocale=en

  Note: Using third-party software or the link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software, or the link is at your own risk.

  If this fails to resolve the problem, visit this link and read "need help?"

  http://www1.Lexmark.com/us/en/view/printers%20&%20MultiFunction/Lexmark-X4850/CATID=cat170005-category&prodId=4145-product

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet.

  I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet. It happened suddenly and with no warning or cause. I tried to turn off the modem for 10 seconds and turning it back on, but I still had the same problem. What should I do? Help, please.

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• WRT300-N - all of a sudden that I can't connect wirelessly

  Today, I noticed that my tivo has not been updated (last update was 2/20) and I checked the connection and it says that my wireless connection has no signal.   So I unplugged my laptop port and brought it into the room and he says: my laptop cannot connect wirelessly.  The laptop worked fine wired and still doesn't work.

  I restarted the router, my laptop and my tivo and when I pass by g. EasyLink it cannot connect my wireless laptop.

  I didn't the power outages, bought something new, etc..  I got this router since Dec 2007 with no problems, and the wireless tivo works since May 2008 with no problem.s

  I have a Dell Inspiron with Vista and Trend Micro Internet Security for Dell as a firewall/antivirus software.

  Any ideas as to why the wireless router no longer works wireless?  Thank you

  First of all, do not use the installation CD ever.  Hold the button to reset at the back for 30 seconds.  Release and wait 30 seconds.  Cycle power to the router.  Connect via a wired computer to 192.168.1.1 empty user name, admin password.  Reconfigure your router manually.  Disable all security on the router and the laptop's wireless and try to connect.  If successful, go back and set up your security.

• I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet.

  Connected to the new router, but locally only.

  Currently, I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet. The small icon to the left of my screen says only: ACCESS: LOCAL ONLY.
  BASICALLY,.

  I have Windows Vista Home Premium, notebook Compaq (Presario CQ60 to be exact)

  I can connect if I use a cable, but its disadvantages.

  I can connect wirelessly with my PC and Ipad. and Internet access.

  I TRIED:
  Various patches microsoft such as resetting TCP, safe mode with network, reset the router. »

  Thank you in advance and we hope you can answer this soon!

  I use an Atheros AR5007 802. 11 b / g WiFi Adapter(Compaq laptop) for the moment so this is useful. Thanks again!
  Someone suggested that I update my wireless driver. I am open to this idea, if anyone can find a safe and legal site with the download.

  Hi Bryyaan11,

  You can check out the link to HP support and try to download the drivers for your wireless card updated:

  Support HP & drivers

  For more information, you can also consult the following article:

  Updated a hardware driver that is not working properly

  You can also check the following items and try the steps:

  Windows wireless and wired network connection problems

  Solve problems, find wireless networks

  Hope this information is useful.

• Windows 7 does not recognize that I am connected to my home wireless network.

  I've recently updated my desktop and my laptop at home for Win 7. I'm trying to set up a home network, but on my laptop, I can't change my home network location. Even though my laptop is connected to the internet via my wireless router, Windows don't think that I'm connected to a network. When I click on "connect to a network", it shows that I am connected to my wireless router. When I try to set up a home network on the laptop, it tells me I need to change the network location of the Public at home, but since he did not think that I am connected, it will not allow to do me this.  I searched the internet and worked through it for hours, but can't seem to find a solution to this problem.

  http://social.answers.Microsoft.com/forums/en-us/w7network/threads

  Windows 7: to connect to the Internet, a group home and by e-mail at the link above.
  

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• How do I put my modum wireless so that I can connect a second computer to him

  IAM, try to connect a second computer to my dial up modum wireless. my computer has windows vista and the 1 Mei try to hang a windows xp. any help would be greatly appreciated.

  Hi carlsbond,
   
   
  -What is the brand and model of your modem?
   
  -Are you referring to connect wirelessly to a network?
   
  If so, here are some links that might help you.
   
  How to connect to a wireless network in Windows Vista
   
  5 steps: how to set up your network wireless home
   
  Set up a wireless network
   

  Kind regards

  Divya R - Microsoft technical support.

• Win 7 does not recognize that I am connected to my home wireless network.

  Recently, I upgraded my desktop and my laptop at home to Win 7. I'm trying to set up a home network, but on my laptop, I can't change my home network location. Even though my laptop is connected to the internet via my wireless router, Windows don't think that I'm connected to a network. When I click on "connect to a network", it shows that I am connected to my wireless router. When I try to set up a home network on the laptop, it tells me I need to change the network location of the Public at home, but since he did not think that I am connected, it will not allow to do me this.  I searched the internet and worked through it for hours, but can't seem to find a solution to this problem. Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I had this same problem.  I have a home group on my desktop running win 7 64 bit.  My laptop (win 7 64 bit) could not connect because the internet connection was showing pubic hair and I couldn't change it.  Here's what I did.  I deleted all my networks and groups off the laptop computer.  I restarted my laptop.  On my desktop, I went into Control Panel, home group and consulted my password.  I also need my wep key of wireless network.

  To better understand, my wireless network name is cleopatraiz

  On my laptop, I went into the wireless network connections through the status bar at the bottom right which displays all networks wireless scope.  I clicked on my wireless (cleopatraiz) and it prompted for the wep key.  I entered that and then I went into newwork & Sharing Center, was now showing my active network as cleopatriz, I clicked on choose home group and sharing options and joined using my password of the Group House of desktop computers.  It worked.

• My wireless connection status shows that I am connected but I did "no internet access.

  Original title: internet connected but shows "no internet access" why?

  I have a gateway laptop and everything suddenly I can't access the internet.  My wireless connections shows that I am connected but I did "no internet access?  I tried to disconnect and reconnect, but that has not worked.  I tried troubleshooting and it says there is a problem connecting with my modem, but it is impossible because all other computers cell phones/Ipod work correctly on the same connection.  Can anyone help?

  Renee

  Hello

  You did changes to the computer before the show?

  I suggest you follow these methods and check.

  Method 1: Remove all the wireless networks, listed in the network and sharing Center.

  1. click Start and select Control Panel.

  2. open the network and sharing Center.

  3. click on manage wireless networks.

  4 remove all wireless network listed in this list.

  5 restart the computer.

  Select your wireless network and connect (if course, enter your password). Check if you see exclamation of yellow color on the bar strength wireless connection.

  If the method above does not work, proceed to the next method.

  Method 2: I suggest you try the steps from the following link.

  Wi - Fi and in Windows network connection issues.
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If the method above does not work, proceed to the next method.

   
  Method 3: Reset the TCP/IP stack.
  
  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357 .
  If the same problem still persists, then try the next method.

  Method 4: Perform the steps from the link to set up a new wireless connection.

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  I hope this helps!