My HP Pavilion Entertainment PC will not communicate with my printer HP 309g. Suffice to say that they are connected to WIFI. I have tried wireless and connected.

Similar Questions

• my laptop will not communicate with my printer

  I have an acer extensa 5430 and a series of hp 4400 printer all in one.  Installing the drivers appropriate etc... controls of diagnostics say printer works fine but it will not be printed

  Hi jamesbauer,

  ·         You did it change?

  ·         If it works well before?

  Try the following.

  Method 1: Run automated troubleshooting and check if it helps.

  Problems printing and printing errors

  Method 2: Check if the following might help.

  Printer in Windows problems

• Computer laptop Toshiba L505-S5990 will not communicate with my printer

  Windows 7 and my laptop is no longer communicates with my wireless printer.

  Manufacturers of printer general advice would be to disconnect / unplug the printer, then uninstall all printer via Add/Remove software, restart the PC. Then gets the latest version of the full version of the site of manufacturers of printer software and plug only / pwr on the printer when the installation says to

• Windows will not communicate with the printer

  Tried to print a document of all programs on windows vista and nothing does, can't get emails or internet content to print either. The only thing I can get to print is the printer test page. Even went as far as buying a new printer, installed software, and the same results. Need help please!

  Hi boatwasher,

  First, you'll want to check your printer manufacturer's Web site to ensure that you have the latest software/drivers.

  Also, please see the similar post with a few other troubleshooting below:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/db63a068-cea4-4221-B37A-b4d6bb1ea8eb

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• my computer will not communicate with my printer

  When I want to print that it isn't shows 0 in queue.

  Make sure that the printer cable is connected and firmly fixed.

  Restart the computer.

  Turn the printer power on and off.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• Acrobat 11 Standard will not communicate with my printer/scanner

  Printer/scanner Epson drivers installed successfully.  Printing and scanning are possible for all platforms, but Adobe Acrobat Standard 11 won't find the scanner to create PDF files.  Any suggestions?

  Spoke with Epson and the problem is now solved.  We removed the scanner setting and set up a new scanner using the correct IP address.

  Thanks for your reply.

• I transferred files from my old laptop to my Vista running a new but can't open them as they say that they are not supported

  I transferred files using a windows vista belkin easy transfer cable to windows 7

  * original title - I moved from my old laptop to my new files but can't open them as they say that they are not supported. Some files that I can open it but its just gibberish. Any suggestions would be appreciated.*

  Hello

  You must have the program, the files were written in vista installed in windows 7 to read

  you do not have file extensions

  read this

  You must have the program installed to be able to read the files of programs

  for example, if it's a .doc file, you installed Word

  .xls, you need Excel

  . PPS, you need Powerpoint

  etc.

  but fortunately, there are FREE viewers provided by Microsoft for the file extensions above which will save you having to buy Microsoft Office

  Here are the download links for free Microsoft Word, Excel and PowerPoint viewers:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3657ce88-7cfa-457a-9aec-f4f827f20cac&displaylang=en

  Word Viewer

  View, print and copy Word documents, even if you don't have Word installed. This download is a replacement for Word Viewer 2003 and all previous Word Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1CD6ACF9-CE06-4E1C-8DCF-F33F669DBC3A&displaylang=en

  Excel Viewer

  Open, view, and print Excel workbooks, even if you don't have Excel installed. This download is a replacement for Excel Viewer 97 and all previous Excel Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=048dc840-14e1-467D-8dca-19d2a8fd7485&displaylang=en

  PowerPoint 2007 Viewer

  Microsoft Office PowerPoint 2007 Viewer allows you to view the presentations of all the features created in PowerPoint 97 and later versions.

  and you can try the FREE Open Office applications game to read these file extensions

  http://www.OpenOffice.org/

  and here's how to set file associations

  How do I... Change file extension associations in Windows Vista?

  http://www.TechRepublic.com/article/How-do-i-change-file-extension-associations-in-Windows-Vista/6172036

• Computer does not open a floppy disk. He continues to say that they need to get in shape

  my machine does not open a floppy disk.  He continues to say that they need to be formatted (even brand new ones that really don't need). so I told him to get in shape. within 30-45 seconds, a screen appears and tells me that the disk cannot be formatted.  There is no help menu or solution for this that I can find anywhere. I run Win XP Home Edition with Service Pack 3. the format screen shows my NTFS file system and the disk is listed in RAW format, but there is no way to change this. Help!  Lots of info on those records that must be transferred to a more modern storage unit.

  Try to get data from old floppy disks can be a nightmare.  For starters, the magnetic media is not particularly stable and the disk may simply have deteriorated.

  More likely, however, that you use in the problem of the "media descriptor block.

  See http://support.microsoft.com/default.aspx?scid=kb;en-us;309623&Product=winxp and http://support.microsoft.com/kb/140060/en-%20us
  There seems to be at least 3 solutions of workarounds for this problem:

  1. find a Win95 computer with a floppy drive and use it to read the data and transfer it to support more modern.

  2. use a disk sector editor as described in 140060 KB (which may or may not work, depending on whether your current disk can read the disc even if Windows allows it to try)

  3 install the driver of 'mode 3' discussed in the following thread: http://tinyurl.com/cs5a5rp (Yes, viaarena link still works).

• I continue to receive calls from numbers not available with an Indian accent saying that they are from the Technical Department of windows and I have a problem with my computer.

  Original title: scams?

  I continue to receive calls from numbers not available with an Indian accent saying that they are from the Technical Department of windows and I have a problem with my computer. Normally, I just say that I don't have and hung up. Today, I took a little further and he said that they discovered that I had loads of malware/viruses etc and that they could identify with them. I was obviously very suspicious because he seemed to have my correct Windows ID number and with care on 'Run' he told me to type things like cmd eventviewer and inf where he referred to a file 1394.pnf. I stopped while he asked remotely to access my computer. However, I got a phone number 01916450337 and his P786000 id I noticed that many people are posting on your forum-is this another one of those scams?

  Continue to put the phone down. They are all crooks.

  They get you to open Event Viewer, because there are words such as 'critical' and 'error' along the this.

• Windows 8 pro applications say that they are not connected to the internet

  I just installed Windows 8 pro and after installing, everything worked well. However, now all applications say that they are not connected to the internet.

  Shop Windows says "you're PC is not connected to the internet," However, when I go to the Office the internet works fine.
  How can I fix?
  I tried to make a new account and check my internet options, but nothing seems to work.

  After much more research online, I was able to find the problem for my computer. Before moving to windows 8, I had AVG internet security on windows 7, and apparently that's what was blocking the applications to connect to the internet.

  So if you have some type of antivirus or internet security installed, try to remove them to see if that makes a difference.

• Hello! The Creative cloud program does not. When you open the file in Photoshop says that there are not many fonts, use Typekit. Typekit itself turned off. All programs downloaded and saved, but Photoshop doesn't see Typekit. What should do? Also says I h

  Hello!

  The Creative cloud program does not. When you open the file in Photoshop says that there are not many fonts, use Typekit. Typekit itself turned off. All programs downloaded and saved, but Photoshop doesn't see Typekit. What should do?

  Also says that I have no access to this service. For access, please contact your COMPUTER administrator or connect using the ID

  Hello

  Greetings!

  Is Typekit on?

  Visit this link: Add to your desktop of Typekit fonts

  Concerning

  Jitendra

• The tablet of Microsoft Surface will not work with my printer HP Photosmart 5510 current wireless?

  I need to get a new laptop as my only current becomes slow and unresponsive, so I thought I'd do a Microsoft Surface tablet when they become available. I only bought my printer a couple of months, and it would really be a guy, if it was not compatible with the Surface.

  Also, I downloaded the Windows 8 Preview of consumers, and in trying to connect my printer, it wouldn't install because it did not support the operating system, telling me to make sure I was using XP or Win 7. After a few weeks, I returned to windows 7. Does this mean that my printer will not work with any version of Windows 8, either on a tablet or PC?
  I thank in advance.

  HP alone are responsible for the support of pilot and he will be at their discretion. If it is a very recent model, HP will probably out drivers more or less at the same time as Windows 8 in fact for the shelves of stores...

• Cannot delete a PDF file! He says that they are "open in the other program", but it is not true. What can I do?

  Hello, I have Acrobat Standard XI and the following question.

  I can't delete files PDF, as the system continues to tell me that they are open in the other program... Of course they aren't! Tried to restart windows, but it did not work, I tried to reinstall acrobat and it did not work.

  If I uninstall Adobe Acrobat, I can remove pdf and get no errors.

  What's wrong? What can I do?

  Help, please!

  How are you trying to remove: from Windows Explorer?  Have you seen active thumbnail?  Can remove you them if you switch the view from Windows Explorer to the details?

• My iPhone 6 will not communicate with my Mazda 3

  Can I connect my iPhone SE my Mazda 3 SP25 communication, but it will not allow my sms or emails out as he used to do with my android phone. I followed suggestions for the activation of notifications via the Bluetooth settings, and while the SMS function is now not grayed out it will not update the sms as it should?

  It is a huge problem because I just bought the changing iPhone to Android?

  I hope it is going to be a change of software to solve this problem, because it is quite common?

  Please notify

  Kay has soon

  Hi kayfrommelbourne!

  I see that the functions of your iPhone work properly with your Mazda.  I know it's important to have these features work properly, and I'm happy to help you.  Don't forget to contact Mazda as well, to see if they have an available firmware update to resolve compatibility issues.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  Thank you for using communities of Apple Support.

  See you soon!

• PC will not communicate with HP Photosmart 5510 printer which works fine...

  My printer works fine when testing printing/scanning...it shows that I have a good network connection, however, when I click on 'print', absolutely nothing happens... even not an error... it worked one morning and in the afternoon, did not... Anyone know what is happening?

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/