Waiting for SP1 to come through Windows Vista update?

Similar Questions

• can not find platform for windows vista update

  my computer does not find the platform for windows vista update and I can't find anywhere to download from. Help! is there anywhere I can download that has not removed?

  Only-how to get updates of platform for Windows Server 2008 and Windows Vista Windows Update the platform update for Windows Server 2008 and for Windows Vista platform update can be downloaded from Windows Update. To obtain these updates, follow these steps:

  1. Click Start, click all programsand then clickWindows Update.
  2. In the navigation pane, click check for updates.
  3. When updates are found, click view available updates.
  4. Select the package to update that you want, and then click install.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  To get the updates recommended for your computer and important, underRecommended updates, select the include updates in downloading, installing, or informs me of the box put up-to-date recommended.

  You check parameters WU to ensure that you get a list of bottlenecks and recommended.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Sims3: someone can give me a few steps for the sims3 on a windows vista installation?

  Can someone give me a few steps for the sims3 on a windows vista installation?

  Insert the DVD into the optical drive, wait until automatic execution appears, select Run Setup.

  During the installation you will be asked for your key you will find on the booklet inside the DVD case.  It will also go and get the EA Updater software so make sure that you are connected to the internet during the installation.

• Cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100)

  Original title: update KB2792100

  My computer has been tyrying updated Cumulative Seci = security update for Internet Explorer 9 for windows vista for over a month now and it says it fails every time.  Any ideas?

  Hi Jeanlavanway,

  Thanks for posting your question in the Microsoft Community.

  From descriptions of the question, it seems you cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100).

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

   

  To help you solve the problem, I would appreciate if you could answer the following question:

  1. you receive an error code or message?

  2 is the issue specific to some or all of the updates?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

  Follow the steps in the link below.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2:

  http://support.Microsoft.com/kb/2509997

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

   

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Method 2:

  I suggest you to install updates and check manually.

  MS13-009: for Internet Explorer Cumulative security update: February 12, 2013:

  http://support.Microsoft.com/kb/2792100

   

  A security update cumulative for Internet Explorer 9 on Windows Vista (KB2792100):

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=36601

   

   

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

   

• How can I get a driver for printer Canon I455 (my windows vista 32)

  How can I get a driver for printer Canon I455 (my windows vista 32)

  You can get this support from Canon... If they chose to take over the device in the given operating system.

  Looking at the Website of Canon's Support for this printer and select your operating system, they * sentence * support with your particular operating system.

  "This software is a module that extends the functionality of the printer driver for Canon inkjet printers. Your printer must be installed through Microsoft Update before you download and use this module. »

  So, basically install you by choosing to look on the Microsoft Update site when you try to install the driver.  It will download one Cannon gave to Microsoft after the release of Windows Vista.  Then, you restart and download the other file (on-site support) to give you more features.

• Windows Vista update: platform supplement for Windows Vista update: KB2117917-french

  Hello, first of all, thanks to anyone who can help me!

  I have problems to install the platform update Supplement for Windows Vista update: KB2117917-french, who keeps trying to update automatically when you start computer.

  Basically, what happens is I turns off my computer and it will update first before turning itself off. I then come back on and it will start installation of finish 3 steps. After 100% on the last screen of the stage becomes black and restarts. As his departure upward, it goes to a black screen and it says something about registry 0/621 or so then he load some files. THEN it goes black again and restart once more.

  This time, it goes to the screen similar to where it puts up-to-date, except it says return update, and then my windows loads very well.

  It's a constant loop and I really need help. I tried the system restore, but I had not all dates really old to restore, and the older that I could do has not solved the problem.

  Again, any help would be appreciated. ^_^

  Hello, first of all, thanks to anyone who can help me!

  I have problems to install the platform update Supplement for Windows Vista update: KB2117917-french, who keeps trying to update automatically when you start computer.

  Basically, what happens is I turns off my computer and it will update first before turning itself off. I then come back on and it will start installation of finish 3 steps. After 100% on the last screen of the stage becomes black and restarts. As his departure upward, it goes to a black screen and it says something about registry 0/621 or so then he load some files. THEN it goes black again and restart once more.

  This time, it goes to the screen similar to where it puts up-to-date, except it says return update, and then my windows loads very well.

  It's a constant loop and I really need help. I tried the system restore, but I had not all dates really old to restore, and the older that I could do has not solved the problem.

  Again, any help would be appreciated. ^_^

  Hey Urdethismylife

  Try the repost in the forum for this windows update

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• How to disable IPV6 for the LOOPBACK address in windows vista

  Hi all

  I have problems in ASP.NET when running any site due to IPV6 alias for the loopback address

  So I need to know how to disable IPV6 for the LOOPBACK address in windows vista

  Help, please

  http://www.lboro.AC.UK/it/Vista/IPv6.html

  There is a record for this difficulty to the bottom of the page above for Tunnel and loopback interfaces...

• Windows Vista update error endless loop

  I am running Vista SP1, Windows Update keeps trying to install important updates for Vista, but every time he tries, it fails and I get the following error message: "updates were not correctly configured. Returning from the changes.  Then it restarts and goes through him everything again and again and again!  Please help me to solve this problem as simply as possible.

  Here is what shows the history of the Update window:

  Update for Windows Defender - KB915597 (definition 1.49.2011.0) definition important success 1 / 17 / 2009

  Update for Windows Vista (KB956802) security is not Important 1 / 17 / 2009

  A security update for Internet Explorer 7 in Windows Vista (KB960714) is not Important 1 / 17 / 2009

  Update for Windows Vista (KB957388) has not Important 1 / 17 / 2009

  Update for Windows Vista (KB955839) has not Important 1 / 17 / 2009

  Update security for Windows Vista (KB958623) failure Important 1 / 17 / 2009

  Update for Windows Vista (KB958624) security is not Important 1 / 17 / 2009

  Update for Windows Vista (KB956802) security is not Important 1 / 15 / 2009

  A security update for Internet Explorer 7 in Windows Vista (KB960714) is not Important 1 / 15 / 2009

  Update for Windows Vista (KB957388) has not Important 1 / 15 / 2009

  Update for Windows Vista (KB955839) has not Important 1 / 15 / 2009

  Update security for Windows Vista (KB958623) failure Important 1 / 15 / 2009

  Update for Windows Vista (KB958624) security is not Important 1 / 15 / 2009

  Update for Windows Mail Junk E-mail Filter [January 2009] (KB905866) successful recommended 1 / 14 / 2009

  Update for the filter of junk e-mail in Outlook 2007 (KB959141) important success 1 / 14 / 2009

  Update security for Windows Vista (KB958687) important success 1 / 14 / 2009

  Windows malicious software removal tool - January 2009 (KB890830) important success 1 / 14 / 2009

  Update for Windows Defender - KB915597 (definition 1.49.1841.0) definition important success 1 / 14 / 2009

  Hi Amby,

  You can try to install the updates in Mode without failure.  To do this, please follow the instructions below.

  When the computer restarts, press F8 while it is starting up.
  In the Advanced Boot Menu of Options, select Mode safe mode with networking
  Once the computer starts in Mode safe, it will hopefully install the updates that you have problems with.  If this does not work, try the following steps to perform a system restore.

  1. Insert your Windows Vista installation disc in the disc drive and start your computer

  2. Press any key when the message "press any key to boot from the CD or DVD shows on the screen.

  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.

  4. click on repair your computer.

  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next

  6. in the System Recovery Options dialog box, click System Restore.

  7. follow the System Restore Wizard and choose the appropriate restore point.

  8. click Finish to restore the system.

  Please let us know if you need more help, or have any other questions.  Thank you.

  Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows vista updates crashes reboot

  Hi, I've had my laptop windows vista for Christmas 2007 business and recently not installs the regular update of windows. The update appears on the home screen and I install, after the instalation it asks me to restart my computer when it restarts do the usual step 1 of 3%, but the updates don't seem to be mounting to and it comes up with one may appear saying "service pack do not have. Restoration of the changes. Do not turn off your computer"so I left it for about 4 hours and it still says the same message! then I turned off my laptop by pressing the power button and when I turn it back appears with the same message and I can't get on my laptop! My laptop is on and is now always show this message! Help, please!

  * Title *.
  Windows vista updates do not work

  claired8,
  Start by going through this article, then post back with the results.
  Vista update stops at stage 3 of 3 Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista update causes applications non - IE to be denied access to the internet

  I have a laptop Lenovo IdeaPad Y510 unfortunately comes with a Windows Vista Home Premium OS that has caused me a lot of problems with conflicts between her and others, package applications, and now I am forced to use my network at home for route information and documents that must move through the internet by sharing them with another computer Windows XP which is also configured exactly as my Lenovo IdeaPad Y510. I look forward to wean myself off of all MS products, possibly other that MS Office, I use a lot and plays always well for me to wire many years and updates/upgrades. Not the same for MS Windows Vista, however. My experience, similar to many other forum users, has been constantly frustrating over the years I've had to deal with it.  I lost a lot of time dealing with problems caused by code errors in the last set of MS Windows Vista updates that made all my package applications that require internet access unusable.

  I contacted the support of Lenovo and support forums for my problem, and they too cannot provide all the answers that address this issue that is causing me to spend much too much time I could use to work at a rate of $65 / hr, so you can see that this is not only an inconvenience.

  Before someone points me to the myriad other similar positions for possible answers, let me say that I probably have alread read it and tried all the suggested actions, without success. I need to REAL answers and REAL support, and I need it NOW.  Also, I don't think I should have to pay for the support which has been made necessary by the negligence of MS to test their updates for compatibility issues with the popular, free package critical applications for the safety of MS OS system of a user, such as AVG Free antivirus, ZoneAlarm Free firewall personal , OR who are competitors for their navigation on the web or by email client applications. I am not now under the other another firewall that MS Vista firewall having had to uninstall my firewall ZoneAlarm Free. I even had one of my other previously compatible and effective anti-malware/spyware apps, AdAware, uninstall Lavasoft. No matter what I did, which was suggested to me by MS resources support or Lenovo support resources, this problem, which began shortly after the last round of all the months of downloads to fix security and facilities, persists and cost me more money in revenue and lost time every day.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And for Windows Update problems:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  You will receive the best help here.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer is located in a loop of reboot installation update to the configuration of the stage on Windows Vista updates

  problem with the configuration of updates on windows vista - endless loop - no way out

  like many before me, I can't start my computer because windows update has got stuck to the configuration. When I try safe mode, it ends up with screen-cant even get on the system of repair-naoual the same loop. No one at microsoft knows the answer to this >

  You need to start on the Startup Repair disk or recovery Manufacturer'e disk/s.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista updates (12 April 2010) broke all the desktop shortcuts

  On 13 April, I fist notice this problem. I managed to it is resolved according to restore my computer to a previous point prior to the windows vista update have been installed. I didn't create a new restore point and also forgot to uncheck "automatic installation of windows. A few days later, the same problem after updates have been installed again on April 15. Unfortunately, this time I don't have a restore point previous April 15. So, I restored it on next day 16, but not resolved the issue. So I uninstall all vista windows update installed on April 15 but did not help either.

  Fortunately it affects only an admin user (user account that run windows update) all users are very well.

  Any suggestions to solve this problem, much appreciated.

  Kind regards

  lmaestro

  SOLVED. It is a Virus. A villain. For more information, see URL below:

  http://social.answers.Microsoft.com/forums/en/vistaprograms/thread/039ceca1-c81f-4136-8c04-bf13c0378495

  I followed the comments posted by "lilvtboiraver" about the "Regetry Exchange" and it solved this problem.

  Thank you

• Windows vista update 80246008 error code

  Windows vista update 80246008 error code

  You must be logged in as an administrator to perform these steps.

  If you receive Windows Update 80246008 error when downloading updates, you might need to change the (BITS) Background Intelligent Transfer Service or the Windows event log service settings and restart each service.

  To change or restart the Service (BITS) Background Intelligent Transfer

  1 open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3 right-click the Background Intelligent Transfer Service (BITS) service and then click Properties.

  4. under the tab general , next to Startup type, make sure that Automatic (delayed start) is selected.

  5. next to Service status, check whether the service is started. If not, click Start.

  To change or restart the Windows event log service

  1 open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. right click on the Windows event log service and then click Properties.

  4. under the tab general , next to Startup type, make sure that Automatic is selected.

  5. next to Service status, check whether the service is started. If not, click Start.

  If the problem persists after you follow the steps above, go to the Windows Update Support Center website to request support by e mail. https://support.Microsoft.com/OAS/default.aspx?Gprid=6527&St=1&wfxredirect=1&SD=GN>

  OR

  Try here and see if Russell Pope is available, if not, try another available technology.

  http://supportservices.Microsoft.com/support/services/windows_update>

  UTC/GMT is 10:53 on Sunday, December 25, 2011

• Failed installation error Code 80070490 Windows Vista update KB976098. How to install this update or keep the windows to try to re - install?

  Failed installation error Code 80070490 Windows Vista update KB976098.  How to install this update or keep the windows to try to re - install?

  http://support.Microsoft.com/kb/958044

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I'm Zenith one 733F error Code when I try to install Windows Vista update to SQL Server 2005 (Service Pack 2 KB970895).

  I'm Zenith one 733F error Code when I try to install the latest Windows Vista Update, which is an update to SQL Server 2005 (Service Pack 2 KB970895).  This update has failed several times now.

  I followed the advice given in a separate post in this forum at Ramer49 to perform a selective startup with msconfig to try to run the update with all Microsoft Services disabled.  This does not solve the problem.

  I spent reviewing the logfile under C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log.  The problem highlighted is that the Services of Services SQL2005 database program did not start.  Here is an excerpt from the log file...

  Product Installation status
  Product: SQL Server Database Services 2005 (MSSMLBIZ)
  (Previous) product version: 3077
  Version of the product (Final):
  Status: failed
  Log file: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log
  SQL Express features:
  Error number: 29503
  Error description: error MSP: 29503 The SQL Server service could not start. For more information, see the

  I tried to run the problem file (SQL Server MSSMLBIZ) directly by using the Windows administrative tool, but the file does not seem to start successfully.  Event Viewer log contains an error with event ID = 823.

  I don't know what to do next.

  Can someone help me?

  Thank you.

  Take a look at this link as it covers a way to fix this problem. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.