Want to use 3 G iPod in the car but don't charge via Firewire
I have a 3G iPod that I would use in my car, but for some reason that I can only load using a charger that has a port Firewire output which then connects to a 30 pin adapter Firewire port. It is extremely heavy, and while I managed to get away with this arrangement in the House, I would like to use the iPod in my car, but about 6 or 8 different Chargers I tried working on three different iPhones and iPod 5G, none works with the 3G iPod - despite the specs mention it.
There was no separate charger when I bought it and it has always been used with Firewire configuration except when I had it installed on a previous car with a Harman Kardon iDrive system, which I don't have.
Surely, it should not be impossible to load a 3G iPod in a car. I would be grateful of any advice or tips.
Nevermind, I just found out why it does not work - I knew not that there is a difference between the 30-pin 12v and 5v USB Firewire input. I had assumed that 30-pin, this could have been housed.
I guess that manufacturers who claim that their Chargers work on iPod 3G simply do not know that either.
Tags: iPod
Similar Questions
-
I want to buy an iPad 2 Air and run Hema maps on it - Hema Explorer and 4WD Hema maps. Can I run these on the iPad 2 to Air EVERYWHERE in Australia because it indicates that the iPAD has 'Assisted GPS and GLONASS' or do I need a SIM card as well. I want to use it for travel in the outback.
Only if they are available in the iTunes App Store.
-
Whenever I want to use windows update, I get the error Ox80070424
Whenever I want to use windows update, I get the Ox80070424 error, what this means and how can I solve this problem? Also, it won't let me use restore it say there is currently no restore points. How can I fix this?
original title: error Ox80070424Whenever I want to use windows update, I get the Ox80070424 error, what this means and how can I solve this problem? Also, it won't let me use restore it say there is currently no restore points. How can I fix this?
original title: error Ox80070424I couldn't see this post before that I responded to your message duplicate.
You can't have the Norton and McAfee. XP Antivirus is malware. It is not a genuine anti-virus. It's a scam. You have a lot of work in front of you to remove the malicious software. I suggest that you scan your computer with Malwarebytes. Follow instructions on the link below.
-
my store is not act immediately after I had to repair in order to open a session, I know there is a command, I can use to fix the store but don't remember. can anyone help?
To avoid confusion and duplication of effort, please post a follow-up later all replies to your original thread...
I had a virus that forced me to the factory reset, but now I can't update anything, error 0 x 80070057 I get n missing or corrupted registry. . troubleshooting of said Windows upgrade fixed it but the same thing happens...
Thank you.
-
I use Adobe cloud to disrupt the application, but the user that I assign an application, the software does not seem his profile
Hi stephanet60407823,
If the software does not appear on her profile, it means that it did not accept the invitation that you sent to him.
Ask him to please follow the steps here: https://helpx.adobe.com/creative-cloud/kb/accept-invitation-team-enterprise.html
Let us know if this helps!
Kind regards
Aurélie
-
Hello
I create my web and download it to Dreamweaver, but it came as I wanted. Now, I need to change the page, but it does not allow me to do so because that is block need help
First, set the folder of your site. Go to Site > new Site > tell DW where to save files to the local site.
http://layersmagazine.com/defining-site-Dreamweaver.html
Nancy O.
-
I want to get a monthly membership for the photos, but what happens if I decide to cancel it in two months? How much would it be?, I want to get a monthly membership for the photos, but what happens if I decide to cancel it in two months? How much would it be?
I have no idea what is the schedule of fees of termination at the beginning.
The swarm FAQ: cancel your creative cloud membership
If you cancel your annual subscription (individual or team) within 14 days, you will receive a full refund. Otherwise, you are charged at 50% of your other obligation contracts.
-
I understood the problem, but don't know how to fix it. It is said to run dxdiag because direct 3D, so i run dxdiag and it finishes loading, I test direct 3D and it works fine, so I re-run halo, but then it still doesn't work. so I went online for patches, but when I downloaded a patch for windows 7, but I have windows xp. so I go back to the internet and search for patches for windows xp, but there is no result. so I thought change to windowed mode halo would work but it dident work when I ran halo 3rd becose my color depth is low, I have 24-bit color quality, but I don't know how to change, so I look for a way to change this for months and no results.so to microsoft answers site please help me because I have nothing else in my mind to the difficulty of halo
I have:(1.halo of the trial(custom edition 2.halo (full)Halo is ever going to work on my computerbecause he never didI play with my cousins that I visit about 3 times a yearHello
I suggest you go through the link.
Minimum system requirements for Halo: Combat Evolved
http://support.Microsoft.com/kb/829479Please check if the computer meets the minimum system requirements to play HALO gameYou can also refer to: -
I am a novice in computers, but also Web design, so I signed up for creative Cloud for our Web site design churches. I really love Muse for design, but it is frustrating that there is so little opportunity to get questions answered quickly. I even subscribe to TrainSimple. It's a good overview, but little support for issues. I know that creative cloud is huge and likely most people use other programs and more, but anyone know where I can go to get direct responses? I looked at all the training videos and read most of the available information.
I would like to publish the sitre using Business Catalyst but do not want to use such a long name. How can I use Business Catalyst with the area, we already have?
I have problems with the design of the tab. When I saw there is a large grey vertical shade along the right side of the image. I think it must have something to do with the size of the property of the original page, but I'm following what is suggested.
Also, the version of Tab comes up on my tab when I test it - it shows the version of office that does not fit.
I hope someone can help me.
Thank you
Stephanie
Hello
On the problem of domain, check this article
Catalyst for help | Creative cloud / add a custom domain name
-
I want to use jsp or jsf as the layer view without using the adf faces
I have successfully build ADF application, but I have problem here
I followed tutorial how to generate ADF application using the simple java class as services trade and JSF as the view layer http://blogs.oracle.com/shay/entry/java_class_data_control_and_ad layer
the problem of the view layer ADF faces HERE IS THE PAGE
* <! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional / / IN."
* "http://www.w3.org/TR/html4/loose.dtd" > * "
* < % @ page contentType="text/html;charset=UTF-8"% >
* < % @ taglib uri prefix = "http://java.sun.com/jsf/core' = 'f' % >
* < % @ taglib uri prefix = "http://java.sun.com/jsf/html' = 'h' % >
* < % @ taglib uri prefix = "http://xmlns.oracle.com/adf/faces/rich' = 'af' % >
* < f: view > *.
* < af:document title = "title" id = "d1" > *.
* < af:messages id = "m1" / > *.
* < af:form id = "f1" > *.
* < af:outputText value = "#{bindings." Return.inputValue}"id ="ot1"/ > *.
* < / af:form > *.
* < / af:document > *.
* < / f: view > *.
I want to change the tags with JSP tags, how can I do this cause I don't want to use ADF FacesReplace af with h.
"http://www.w3.org/TR/html4/loose.dtd" >
<%@ page contentType="text/html;charset=UTF-8"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
-
Here's the image in question.
I don't know, but what I need to buy the license for $79.99? Alternatively, since I changed the work, I'm fine?
I see a lot of people selling album art on the internet in various facebook groups after you change the images of the reserve, but I don't know how it's legal.
I don't want to end up in trouble.
Any input would be great :^)
Thank you
Dave
[img] http://i.imgur.com/uv3SUHF.jpg [line]
I think you're probably fine up to 500,000 copies. Be not different from the covers of books.
-
In 9 years. I re XP 5 times because it was the ONLY done fixthat my Dell Dimension 8250 run fast. I kept all the updates, ran the cleaners of files, defragmented the hard drive, put the parameters to performance don't not Visual, even added more than 512 MB ram (1 GB total) that has MADE for a month or 2 really speed things up, but it is also to slow. The last time I put the XP disk in there was this msg: "Setup cannot continue because the version of windows on your computer is newer than the version on the CD. ANY HELP is HIGHLY appreciated as this is the measure of my ability of fix - it - happy to post here any info you need to diagnose this bottleneck problem, thanks, Patrick
Do yourself a favor. After your next relocation and after you get it until you're happy with it (install SP3 and all subsequent security patches, install all the programs that you use regularly, install a good antivirus, install the latest versions of Adobe Flash and Java, etc.), make an image of your hard drive. This way you will EVER need to reinstall your OS again! Acronis and Paragon are good programs. DriveImageXML is a good gift (but doesn't have as many features as imaging programs paid).
About the General slowness, here are the usual causes:
1. malware (malware). You need to rule out first! This page has excellent information:
2. some programs aimed at combating malware (for example, Norton and McAfee). Ironically, they can slow things down because they use simply much too many resources. Sometimes they cause conflicts with other programs. And their default mode is to scan your entire hard drive whenever you start. Fortunately, there are other programs of anti-malware software available that use much less resources (p. ex., NOD32, Avast and Avira).
3. too much of certain types of programs still running in background - with or without your consent. (Then again, a lot of programs running in the background of the consequences trivial.)
To determine each program and process, you are running, use the task (Ctrl + Alt + Delete) Manager and click the processes tab. You should be able to sort by CPU usage or memory usage for a good ideas that are resource/memory hogs. You must write the names of all the processes for future detective work (or take a snapshot and print it).
Use these sites to determine what these programs are, and learn how configure them to not always run when starting:
http://www.PACS-portal.co.UK/startup_content.php#THE_PROGRAMS
http://www.bleepingcomputer.com/startups/
http://www.AnswersThatWork.com/Tasklist_pages/Tasklist.htmSometimes, it is recommended to use msconfig to configure programs to run at startup. A better, more thorough program is Autoruns:
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
But before that, you must use the settings preference of the program in question. Otherwise, for some programs, they will return to the list of startup anyway!
If you do not want to use msconfig, it can be accessed in this way:
Start | Run | Type "msconfig" (without the quotes). Enter (or OK)
4. not enough RAM, causing the PC too rely on the pagefile. A quick way to determine if what is happening is to open (Ctrl + Alt + Delete) Task Manager, and then click the performance tab. Then the three values under Commit Charge (k) Note: in the lower left corner: Total, limit and peak.
The Total number represents the amount of memory you are using right now. The vertex figure represents the maximum amount of memory you made since the last boot. If these figures are lower than the value of the amount of physical memory (K), then you probably have lots of RAM. In case you want to study it more, you can run the Page queue Monitor for Windows XP:
http://www.dougknox.com/XP/utils/xp_pagefilemon.htm
5. you can also verify that the access mode of your hard drive has not changed from DMA to PIO:
http://www.technize.com/2007/08/02/is-your-hard-disk-CDDVD-drives-too-slow-while-copying/
and
-
I have w7 Home premium for both laptop and desktop. laptop has already homegroup thingy (can't remember the make, but I must have...) and I want cell phone to be able to use pictures and documents that are on the desktop without having to copy everything from one to the other... somehow but I can't set up the connection and the damned if I understand the ref ethernet or whatever it says fights a router... im so out of my comfort zone, his (not? it's) funny, hilarious, in fact, something so seemingly simple a beat me. can anyone help or it's just too ridiculous for words?
Hello
The easiest way is for you to read these links which have a clear idea of how to proceed.
"Home sweet homegroup.
http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way
"Create a homegroup."
http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup
And this is what is an Ethernet cable
http://www.eBay.com/Sch/Ethernet-cables-/64035/i.html
You use these cables to connect your desktop computer to your router.
See you soon.
-
Calc want to work "behind the scenes, but don't not to appear in the query.
Hello world
Hope all is welll...
I have a called calc: Calc_HippaToSortNumber who:
DECODE (hold desc, 'HIPAA', 999, NULL, 0, 500)
I use it in a condition:
Calc_HippaToSortNumber = Calc_MaxHoldDesc
I would like to remove the column from the query, but it is still active, get this msg when I try to
Remove the column:
ambigously defined column
Any ideas how I can remove from query, but still keep the calc active?
TX, SandraHello
I just wanted to try the Calc_MaxHoldDesc calculation
MAX (DECODE (hold desc, 'HIPAA', 999, NULL, 0, 500)) OVER (PARTITION BY Student.Id)
While there is no reference for the calculation of the others.
Rod West
-
I want to use adobe without mm in the edition of a document
Hi all
I'm trying to edit a document, but get a warning that the adobe sans mm is not available on my system. It seems that all of the text in the document is created in this font. It uses a substitute font, but not one that looks like the original at all. I like a police closely matched, or better yet, just be able to use adobe without mm. otherwise, you can see my amendments if you look closely. I found an arial font that will do as a substitute, but want to do better.
Any ideas?
Thank you.
Adobe and Adobe Serif MM are backup fonts that Acrobat uses every time a font is not embedded in a pdf document.
These fonts are Multiple master fonts that don't exist in Acrobat and are not available at the level of the system.
According to Dov Isaacs at Adobe, you must have a really installed font in your system to be able to use it to change a PDF file.
Think of these virtual fonts that actually do not exist on your computer, thus so that they cannot be used to modify a PDF file.
You can see them and you can print them, but you cannot access it.
The only exists in Acrobat and not coming into play that a default font that Acrobat uses whenever the real police which was used was not incorporated.
(Master several fonts never really became popular, and are no longer produced.) They have been replaced by the Foundation open type fonts)
Maybe you are looking for
-
10 do iPad iOS 2 Air running slow
After the upgrade to iOS 10, I noticed my iPad 2 Air starts to run slowly. I mean by "slowly" as slow as my old iPad Mini 2 ran on iOS 9. It is a huge problem, and I'd rather not buy a new iPad. Any ideas?
-
Drop-down menu bar is impressive is empty
Yesterday, my Firefox has been updated to version 16.0.1. Then, I realized that my awesome bar drop-down list is become empty - it is not, I can see the icons of the proposed sites, but there is no text next to the icons. Apart from that it works ok
-
Some video players does not not in Firefox
First it was the Interactive map of the radars to weather.com refusing to load http://www.weather.com/weather/map/interactive/Sevierville+TN+37876 What I see is "loading" animation where the radar should appear for about a minute before being redirec
-
Can not burn blank CD on Equium A200-1VO - unknown error occurred (2131)
Hi all I have never been able to burn a blank CD using the rewritable CD drive on my Equium A200 1VO.I am using TDK CD - R80 700 MB ', 'up to 52 x speed"blank CD This is the error I get when I try to burn a disc in iTunes:The attempt to burn a disc f
-
Cannot install XML Core Services 4.0 Service Pack 2 (KB954430)
Have tried to install the update of security for Microsoft XML Core Services 4.0 Service Pack 2 (KB954430) since Nov 08 and it continues to fail; Microsoft .NET Framework 3.5 Service Pack 1 for .NET Framework 3.5 Family Update (KB951847) x 86 as well