I use Adobe cloud to disrupt the application, but the user that I assign an application, the software does not seem his profile

Similar Questions

• Error: The system does not meet the installation requirements. the software does not support this versio

  1 LASERJET PRO CP1525nw

  2. Windows XP

  3 error: the system does not satisfy the installation requirements. the software does not support this version of Windows. Search hp.com for more information on this product compared to this error.

  4. no change

  Thanks, but I arrived on the support desk and the problem was that for XP, you use the printer Install "Option in the drop down box and then select the"TCP/IP"Port, if you choose the option 'Wireless'.

• I have windows 8 and ip4000. The software does not load and it doesn't seem to be a driver for 8 64-bit windows. What can I do?

  I have windows 8 and ip4000.  The software does not load and it doesn't seem to be a driver for 8 64-bit windows.  What can I do?

  Hello

  I had the same problem.  I was able to get around by loading the driver for Windows XP 64 bit from the Canon web site and then install the printer using the normal menu of 'install new printer' Windows 8.  If I remember correctly, I could have gotten an error message or two, but the printer appears in the printer window and ran very well.  Hope this works for you as well.

• Need to update my Acrobat 9.0.0 Pro to 9.5.5 version. Where can I find the necessary files - because the update does not seem to react (not supported any more, I guess that)

  Need to update my Acrobat 9.0.0 Pro to 9.5.5 version. Where can I find the necessary files - because the update does not seem to react (not taken care no more, I assume that). I wouldn't be forced to buy a newer software in this way...

  You can get all updates from here: ftp://ftp.adobe.com/pub/adobe/acrobat/

  Remember that you must install in order, one after the other.

• My update of the software does not work

  My update of the software does not work and I can't return to the main he keeps on telling me to restart the computer and then go through the software update settings, then it ends by does not and then it tells me to restart and restart and restart again and again

  What updates you trying to install?

• CS4 and w7 use masks by default on the regulation does not

  Hello

  I installed cs4 on a new install of w7

  and use default masks on the regulation does not

  
  

  on or off , every time that I add an adjustamen layer, photoshop Add a mask of white blanck

  Thank you

  y at - it a cure?

  I said "uncheck the Add mask by default in the menu of the settings panel"

  

• The device does not seem to be pluged?

  Please which hat an en ansewr this

  When I used the Microsoft fix it I get this answer "the device does not appear to be pluged?

  Hi ArtanLala,

  1 are you facing sound problems?

  2 what Microsoft Fixit did you run?

  3. using external speakers?

  If you are facing problems with the sound, you can check with headphones and see if the sound works fine.

• I wish I had my day starts at 08:30, 12: 00 no, but that change in the options does not seem to affect the appearance of my calendar, how can I change this?

  I just started to use Windows Calendar.  I wish I had my day starts at 08:30, 12: 00 no, but that change in 'options' does not seem to affect the appearance of my calendar, how can I change this?

  Hello
   
   
  Exactly why you want to change the start time of day?
   
  If the part highlighted changes in the calendar view, which means that the option is selected.
   
  I suggest you to see the link and check if this is useful:
   
  Customize windows Calendar
  http://Windows.Microsoft.com/en-us/Windows-Vista/customize-Windows-Calendar
   
  I hope this helps.

• Complete installation of the driver does not seem to take

  I have a HP5520 all in one. It was working fine a few days ago. It is used to open a screen on my computer when I click on the printer icon and asked me if I wanted to use USB or wireless. When I choose that I'd get another screen I think where I could choose to scan a document.

  A few days ago the icon to display the first screen where I select what USB or without wire would work, but when I select and click OK, nothing would happen. She would not open anything more. I was able to print again if I asked him to print something and that I could still scan if used a repair HP doctor program. In other words the doctor program go through tests and would say that everything was fine and then asked me if I wanted to do a test analysis. I could use this feature to scan test to analyze something.

  I downloaded and installed the full driver for HP 5520 package all in one several times this morning. It goes through the process of installation but then when I try to use the printer, for example, I go to START and click the 5520, it displays the dialog box indicating "install the HP printer.  The HP Wizard from the support page says that all is well. But it seems that now I can't even put this first screen that allows me to choose USB or wireless. It is not just open the program more on my computer.

  It will print if I choose to print something from the computer.  But it will not open the dialog box that allows me to access the scan feature.

  When I scanned a document to the screen on the printer itself, and I chose to scan my computer. He went through the scan function and I could see the document on the small screen on the printer, but it didn't pop up on the computer at all, so nothing I could do with it, as record or something.

  Help. I tried everything I can think of.

  Bill

  Hello

  Follow these steps to fix the HP software:

  http://support.HP.com/us-en/document/c03659948

  Then try to open the HP software and check any change.

  If the software is not yet launch after you complete these steps, install the following hotfix and check any changes:

  http://support.HP.com/us-en/document/c03640384

  Kind regards

  Shlomi

• Adobe should warn or reimburse users of the 16-bit window machines that the software does not work

  In good faith, I'm subscribed to Adobe expected of professional quality products.

  I have a fast and powerful - if by the standards of recent years - machine and it certainly would have been possible to run older versions of Photoshop and Lightbox on a Quad Core i5 but when I subscribed versions will not properly work on a 16-bit PC.  Windows 16-bit only will address I think 4 GB of memory and a large part is absorbed by the operating system.  I was not yet able to define the edges on a selection!

  I tried to unsubscribe, but Adobe has offered 60 days for free!  Clever.  They bought me comes back with who in the hope that I will be able to update my system at that time here.

  But they should warn people - creative cloud does not work on 16-bit computers when using images of modern resolution.

  Hello

  Please see the following links:

  Manage your creative cloud membership

  Cancel your membership creative cloud

  If you still need help please contact support: contact customer service

  *Remember to stay signed with your Adobe ID ( email id used to purchase the subscription ) before accessing the link above*.

  Select the exact options listed below for support options:

  

  Let us know if that helps.

  Kind regards

  BANI

• Multisim 12 - by clicking on the button "stop the simulation", does not seem to turn off the circuit

  Greetings.

  I recently installed 12 Multisim and have not changed the basic operational parameters, I know...

  Shortly after installation, the application is an update.

  Your help is apprecaited to understand what is happening...

  Steps to recreate:

  1. start multisim.

  2. open a very basic circuit that includes a battery 10V with the ground, a lamp, a voltmeter between the lamp and an ammeter in series.

  3. use 'switch' at the top right of the appliation multisim window to run the simulation.

  4 lamp shows a 'enlightenment' and voltmeter indicates 10V and ammeter indicates .1a circuit.

  5. use the switch to stop the simulation.

  6. no change in the circuit or lighting of the lamp measures.

  7. same results if the simulation starts the arrow and the red square are used to start and stop.

  If I close it and reopen it circuit, the circuit begins in the OFF state, but will not OFF If when you select stop simulation.

  This is the case with several circuits, those provided by the College and the other that I created based on the same design.

  Multisim restarting has no effect to correct this observation.

  It doesn't seem normal that when the simulation running, values or apparent lamp lighting does not change.  The simulation doesn't have to go back to the start state (OFF) when I stop the simulation?

  I captured the homerun status after stopping the simulation.

  Thanks in advance for your help.

  Zan

  Hi zanzarista,

  Multisim retains the values for everything in the circuit when the simulation is stopped. Which means that you are able to view the values on your instruments (such as multimeters) even after the termination of the simulation. When you start a simulation once again, starts all over again and that's why you see a 0 momentarily.

  It is the way in which the software is intended to work.

  I hope this works.

• BlackBerry Smartphones Blackberry Bold 9930 update failed and the software does not load

  I have a Blackberry Bold 9930 and yesterdasy I received a msg saying to upgrade to 7.x software Blackberry. I followed the instructions (takes too long like 2 hours to download) and then. Big mistake because it cooked my phone. It seems that when you upgrade, the upgrade process goes thru, but stops after the time zone to restore the process and reports an error 602 with a reset button to reset your database. The reset button does not work and I restarted the phone to restore the db. At the moment that it restarts, launched the process, and even once, it failed after the msg indicating time zones (100% and overall restoration treatment 7%). Zones roughly completed, but then I got a msg saying I wandered 602 belive. On all courses was about 5 to 10 percent. Now my phone is undesirable because it does not restart. Verizon says they have a large number of phones across the country, but BlackBerry says it's a matter of Verizon...  Someone at - he already heard of this I am now without such a 4 days while I get a replacement Friday because of the holiday...  I am not very happy as another question, I found - during the upgrade process it used the cells instead of my wirelss home network to download the software and it really took about 2 to 3 hours, then another hour before it failed during the upgrade process. So about. 3 to 4 hours to play with an upgrade yesterday.

  Thank you

  Rich

  Hello merlin02131

  Welcome to the Forums of the BlackBerry Support

  Sorry to hear about the problem you are experiencing during the update!

  But you can still use Desktop Software for the update process, personally, I prefer never to do an Over the Air update. I think that something has gone wrong with the update process and thus you encounter this error 602.

  You have a backup of your device, or using BlackBerry protect for the backup?

  If you wish you can try several method to recover your device of this error, all you need is a PC and an Internet connection active. But attention, this method deletes the data user in this device. This is the Knowledge Base to follow:

  KB10144 : How to force detect the BlackBerry smartphone using the Application Loader

   

  Additional information:

  KB29237 : "App Error 602" appears on the BlackBerry smartphone running BlackBerry 7

• Œuvres of CanoScan Lide 700F Scanner - but the software does not work

  Installed a CanoScan Lide 700F scanner. Through Windows Fax & Scan and can use it.  However the software provided, which allows to work when I first installed W7, now hangs.

  Canon support indicates that it is a problem with W7? I would like to use the software and there should be a solution please?

  The failing application name: mpnex21.exe, version: 2.1.1.0, time stamp: 0x49227b7f
  The failed module name: ntdll.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdadb
  Exception code: 0xc0000005
  Offset: 0x00028c72
  ID of the process failed: 0xd38
  Start time of application vulnerabilities: 0x01caf73c57d95b7e
  The failing application path: C:\Program Files\Canon\MP Navigator EX 2.1\mpnex21.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: 999d4e6a-632f-11df-96f1-0019665407d5

  Try to run the installation of the software in compatibility mode, and right on the configuration file and select 'troubleshoot compatibility '... Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• I want to install a yeti pro Usb device but the system does not seem to find it

  the yeti pro is a plug-and-play device that self settle, but for one reason or another, it does not do this. In the devices window that there a yellow sign attached to it, apparently not correctly installed,
  I downloaded the driver to install it manually but the pilot application cannot find the device on the PC, even if it is connected (all used ports) and the driver is not configured to install without the connected device
  I willl be happy if any1 can help out me
  Thank you

  Hello

  Glad to know that the problem has been resolved.

  Travel to your other question.

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Uninstall process will not go by if there is no file in the program folder files.

  I you suggest to install tuneup utilities again and then you can uninstall programs and features.

  Please let us know the status of the issue.

• How will I know that my Windows product key is if one on the sticker that is located on the computer does not seem to work?

  You want more details. For two hours I answered all the questions that ask you that. And still no support. You up to the date of this laptop, every day at 03:00, so don't tell me the product key, which is on the back of this box is incorrect. Or that it is not the country I say. Just send me what is on the back of this box, which I paid too much for in the first place.

  We are not Microsoft. We are volunteers who give of our spare time to help people. Complain about Microsoft is a waste of time. We are in the same boat as you when it comes to most of the problems and not more control or access that you have to do.

  A product key is not in the box where everyone can see.  It is a sequence of alphanumeric 25 digit of 5 sets of 5 digits separated by dashes for the operating system.  If this is the original installation, the key will be on a label on the underside of the laptop.  It has been upgraded or purchased as a product of the retail (suggested by saying you that you have a box), then the product key for the product to the retail sales would have been on a piece of paper inside the box.  The product key on the label of the laptop would have been crushed (which would have been in the computer would have been product key from the manufacturer that could not be used to enable or provide proof) by installing the retail or upgrade.  Microsoft has no idea what is your product key regardless of the case - even if you bought them (unless it was by a download and then you should have an email from their share with the product key to this topic).

  If this is not a problem of activation or re-installing and that you have installed and activated the product yourself, try of Belarc Advisor http://www.belarc.com/free_download.html and see if the product key, it reveals work best of all what you use now.

  For more information, if it does not help, post to http://answers.microsoft.com/en-us/windows/forum/windows_install?page=1&tab=all&tm=1300700638376.

  Good luck!