WAP300N: Wireless clients are isolated from my local network?

WAP300N is an AP, but how can we separate wireless clients who come from the WAP300 on my local network? o option NAT or IP isolation?

This access point is not an isolation wireless feature. Even if that were the case it would only isolate wireless devices connected to each other not the LAN.

It's something that your router will have to manage. There are several ways to do this for an example of insulation VLAN or subnet isolation.

Tags: Linksys Routers

Similar Questions

How do I know if the wireless clients are connected under mode N

Hello

I would like to know if there is a way to know that wireless clients are connected in N mode. There is some sort of command where can show me that? I Don t have a wireless controller. My access point is AP-1141N-A-K9

thnks!

Unless you have a WLC, the answer is 'no '.

Computer disconnects from the local network after a while

Hello

the place I work has a local network with nearly 20 computers.
One of them is used only to receive some PDF files from the scanner and there our database (PostgreSQL).

The problem is that, after some time we can not access it via Explorer by typing '\\server' on the address bar, but the connection to the PostgreSQL Bank will continue to operate.

I have already disabled the drive for energy savings computer network mode.

What can happen and what can do?

Thanks in advance,
Felipe Sousa

Hi Felipe,.

Thanks for posting your query on the Microsoft Community.

According to the description, I understand that your computer disconnects from the local network.

I suggest you post your query on the TechNet forums , because we have experts working on this type of questions and for you help the better.

Check out the link:

https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

Global variables are accessible from the local computer

While he was trying to use RT project, I can deploy the file to the RT target and communicate with the host using a shared variable.

But the host VI file returns an error stating that the shared in the pattern-block VI host variable is illegal.

(RT.lvib\Link reqd\ 'shared variable' node is illegal)

It also gives a description mentioning that global variables are accessible only to local machines.

What is the cure?

Hi Shan21,

I think your problem with communication between the aim of RT and the host PC might be caused by how your deployment of your variables. Please take a look at the following and let me know what you think,

Kind regards

******************************************************************************************************************************************

When you make the executable of a project using shared variables, you must have a local copy of the variables on the deployment computer that are then linked to the 'real' shared variables stored on the target - cRIO, in this case.

This means that the display of your project should look like this:

Note: Two libraries, which can have variables with the same name because they aren't both on the local computer.

The steps required are:

1. create variables shared in the normal Manor on the cRIO:

a. right click on the target
b. new > Variable
c. properties of the variables enter the name (stop); Data type (Boolean) and the Variable type (always in network-published).

2. create variables shared on the host PC:
a. follow the steps 1 a - c
b. right click on the box to enable anti-aliasing

c. linking to the URL of the PSP, click on Browse - and select variable on the target:

d. click Ok.

Note: Remember also to deploy the shared manually variable llb. See the related links for more information.

It's from a base of knowledge to write soon.

Note:3UCBHM8T knowledge base: how to deploy network Variables shared a compiled executable

Client VPN cause loss of local network

When you use the CISCO VPN Client to a remote network, we lose connectivity to the LAN. We RDP on this server and then establish a VPN connection to another location. Once the VPN connection is established, the RDP connection is lost and you cannot ping the local IP of the server, but it is connected through the VPN newly created to a remote site. I know this has something to do with the split tunnels? How can I configure my NIC or properties so that the new VPN connection does not break the local connection? The application is that the local server is running an application that has an ODBC connector to a report data source.

The administrator of the VPN gateway has set up the Tunnel of split for your connection. Then it will work as you need.

I'm having a problem with XP Professional acquire an ip address from my local network.

I just varies from att uverse to modom cable suppliers. The pc will be print to my network printer but not acquire to connect ti internet. My wife works at home online in this pc. I tried to reinstall the driver for the ethernet connection, but he only will link mimumally and not go on line.

Your ISP should be able to tell if you need a router or if the switch is enough and help you set up your PC, so they can all connect through the cable modem. At the very least, if you do not get with the modem, the people who make the modem should have documentation on setting up things.

Brian Tillman [MVP-Outlook]
--------------------------------
https://MVP.support.Microsoft.com/profile/Brian.Tillman
If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

Application of Wireless Clients dhcp

Hello

I have 2 sperate DHCP servers installed in my office.

One is hosted in a cluster environment and the other is on a server unique separate windows.

Wireless clients and my LAN become IP DHCP from the single server

But only my LAN IP clients get the extended cluter of DHCP server, wireless clients are not able to obtain intellectual property.

I added the following on

Controls added to interface vlan 1 on router gateway

IP helper-address XX. XX. XX. XX (windows cluster virtual server IP)

IP helper-address XX. XX. XX. XX (IP of server stand-alone windows)

Additional command on the router to bridge worldwide

chip-Relay IP dhcp

Can someone let me know what could be the problem?

Thanks in advance

You did not understand.

Step 1) click on your SSID. The first page should tell you what interface the ssid relates to. normally, you have created an interface vlan corporate and a virtual local network of comments interface.

(Step 2), go to 'controller', 'interface' and select the interface according to

There you have 2 fields to enter the DHCP server. Enter your ip addresses of the DHCP server.

The ip address that will be given to customers is an ip address from the subnet of the interface WLC send the request.

The fact that your uplink's trunk has nothing to do with this at all and the tab 'Advanced' wlan config is

Cisco VPN Client cannot ping from LAN internal IP

Hello

I apologize in advance for my lack of knowledge about it, but I got a version of the software running ASA 5510 7.2 (2) and has been invited to set up a site with a client, I managed to get this configured and everything works fine. In addition, I created a group of tunnel ipsec-ra for users to connect to a particular server 192.168.10.100/24 remote, even if the connection is made successfully, I can not ping any IP on the LAN 192.168.10.0/24 located behind the ASA and when I ping inside the interface on the ASA it returns the public IP address of the external interface.

If someone out there could give me a little push in the right direction, it would be much appreciated! This is the current configuration of the device.

Thanks in advance.

: Saved

:

ASA Version 7.2 (2)

!

hostname ciscoasa5510

domain.local domain name

activate the password. 123456789 / encrypted

names of

!

interface Ethernet0/0

nameif outside

security-level 0

PPPoE client vpdn group ISP

12.34.56.789 255.255.255.255 IP address pppoe setroute

!

interface Ethernet0/1

nameif inside

security-level 100

IP 192.168.10.1 255.255.255.0

!

interface Ethernet0/2

Shutdown

No nameif

no level of security

no ip address

!

interface Ethernet0/3

Shutdown

No nameif

no level of security

no ip address

!

interface Management0/0

nameif management

security-level 100

IP 192.168.1.1 255.255.255.0

management only

!

passwd encrypted 123456789

passive FTP mode

clock timezone GMT/UTC 0

summer time clock GMT/BDT recurring last Sun Mar 01:00 last Sun Oct 02:00

DNS server-group DefaultDNS

domain.local domain name

permit outside_20_cryptomap to access extended list ip 192.168.10.0 255.255.255.0 host 10.16.2.124

permit inside_nat0_outbound to access extended list ip 192.168.10.0 255.255.255.0 host 10.16.2.124

access-list Split_Tunnel_List note the network of the company behind the ASA

Split_Tunnel_List list standard access allowed 192.168.10.0 255.255.255.0

pager lines 24

asdm of logging of information

Outside 1500 MTU

Within 1500 MTU

management of MTU 1500

IP local pool domain_vpn_pool 192.168.11.1 - 192.168.11.254 mask 255.255.255.0

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm - 522.bin

don't allow no asdm history

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 0-list of access inside_nat0_outbound

NAT (inside) 1 0.0.0.0 0.0.0.0

Route outside 0.0.0.0 0.0.0.0 12.34.56.789 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout, uauth 0:05:00 absolute

internal domain_vpn group policy

attributes of the strategy of group domain_vpn

value of 212.23.3.100 DNS server 212.23.6.100

Protocol-tunnel-VPN IPSec

Split-tunnel-policy tunnelspecified

value of Split-tunnel-network-list Split_Tunnel_List

username domain_ra_vpn password 123456789 encrypted

username domain_ra_vpn attributes

VPN-group-policy domain_vpn

encrypted utilisateur.123456789 password username

encrypted utilisateur.123456789 password username

privilege of username user password encrypted passe.123456789 15

encrypted utilisateur.123456789 password username

the ssh LOCAL console AAA authentication

AAA authentication enable LOCAL console

Enable http server

http 192.168.1.0 255.255.255.0 management

http 192.168.10.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

Crypto-map dynamic outside_dyn_map 20 set pfs

Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

card crypto outside_map 20 match address outside_20_cryptomap

peer set card crypto outside_map 20 987.65.43.21

outside_map crypto 20 card value transform-set ESP-3DES-SHA

3600 seconds, duration of life card crypto outside_map 20 set - the security association

map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

outside_map interface card crypto outside

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

aes-256 encryption

sha hash

Group 5

life 86400

crypto ISAKMP policy 30

preshared authentication

3des encryption

sha hash

Group 2

life 86400

tunnel-group 987.65.43.21 type ipsec-l2l

IPSec-attributes tunnel-group 987.65.43.21

pre-shared-key *.

tunnel-group domain_vpn type ipsec-ra

tunnel-group domain_vpn General-attributes

address domain_vpn_pool pool

Group Policy - by default-domain_vpn

domain_vpn group of tunnel ipsec-attributes

pre-shared-key *.

Telnet 192.168.10.0 255.255.255.0 inside

Telnet timeout 5

Console timeout 0

VPDN group ISP request dialout pppoe

VPDN group ISP localname [email protected] / * /

VPDN group ISP ppp authentication chap

VPDN username [email protected] / * / password *.

dhcpd dns 212.23.3.100 212.23.6.100

dhcpd lease 691200

dhcpd ping_timeout 500

domain.local domain dhcpd

!

dhcpd address 192.168.10.10 - 192.168.10.200 inside

dhcpd allow inside

!

management of 192.168.1.2 - dhcpd address 192.168.1.254

enable dhcpd management

!

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

!

global service-policy global_policy

context of prompt hostname

Cryptochecksum:1234567890987654321

: end

Hello

Seems to me that you are atleast lack the NAT0 configuration for your VPN Client connection.

This configuration is intended to allow the VPN Client to communicate with the local network with their original IP addresses. Although the main reason that this is necessary is to avoid this traffic to the normal rule of dynamic PAT passing this traffic and that traffic is falling for the corresponding time.

You can add an ACL rule to the existing ACL NAT0, you have above and the NAT configuration should go next

Add this

permit inside_nat0_outbound to access extended list ip 192.168.10.0 255.255.255.0 192.168.11.0 255.255.255.0

Hope this helps

Let me know how it goes

-Jouni

Set up a wall of fire on a group of work when it is connected to a local network

I work at a large company that has a LAN with internet connected to it. In my Office I have 3 PC connected to a same workgroup but different from other working groups.

I want to set up a firewall on my workgroup to prevent external access to my files. How can I do? or is it possible to set up a password for my workgroup?

My PC is running xp2 professional win.

Help me with that.

Working groups do not provide any type of security on a network. A computer in any working group can access a computer in any working group. There is no firewall or passwords for the working groups.

I recommend that you ask the people who run the company LAN how to do what you want. They will know if it is possible and to ensure that what you are compatible with the local network.

Boulder computer Maven
Most Microsoft Valuable Professional

AWM 11 g Client to access the site from the local office
Hi David,

Is it possible to use the MN as a client. For example, I have a virtual machine where I can access AWM for 11g after launching the file AWm.bat of the remote server. However, there is limitation of the terminals for multiple users remote desktop so if developer want to access the workspace even on his local computer is feabile to start the installation from the local computer and leave the same AW interface with all the workspace pre-built and etc. ?

Thank you very much
Paiva
Are asking you if you can run AWM on a laptop, say and have access to a database on another server instance? If so, then the answer is Yes. You can run AWM on any Java compatible machine until it can connect (via JDBC) to the server. This can be a problem if you have a firewall.

If you ask if you can have multiple instances of AWM open at the same time, while watching the same AW, so it's more difficult because AWM attached the AW in read/write mode. There is a solution, but it is not recommended because the various SGF can get out of sync with the AW itself.

No Internet access, the 'Connect to the Local network' and 'Wireless network connection' are "Local only".

I'm portable computer maintenance of the customer, a Toshiba Satellite L305-S5885, under Vista Home Premium x 86 SP2, with infections by malicious software and internet connection problems. I have managed to get rid of all of its 251 infections and I am now addressing the connectivity problem. I'm unable to achieve on its ethernet or a wireless connection to Internet. The two network status of connections 'Unidentified network', and also ' access: Local only ' all other machines hooked up to my router via CAT5e and some via 802.11 g/n, have excellent speeds with internet connectivity, so I know that the problem is limited to his machine. I tried the following:

Deactivation and reactivation of these two connections: FAIL.

"Diagnose and repair" on the two connections: FAIL.

Under dynamic I.P. type to static/static to the dynamic: FAIL.

Uninstalled all network via Device Manager devices, then restart: FAIL.

Manually uninstalled all the drivers and utility and installed the latest versions: FAIL

The command ipconfig/all text follows:

----------------------------------------------
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\Brooklyn's>ipconfig/all

Windows IP configuration

Name of the host...: Brooklyns-PC
Primary Dns suffix...:
Node... type: broadcast
Active... IP routing: No.
Active... proxy WINS: No.

Wireless network connection Wireless LAN adapter:

The connection-specific DNS suffix. :
... Description: Intel (r) Wireless WiFi Link 4965AGN
Physical address.... : 00-21-5C-31-87-95
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Autoconfiguration IPv4 address. . : 169.254.174.235 (Preferred)
... Subnet mask: 255.255.0.0.
... Default gateway. :
NetBIOS over TCP/IP...: enabled

Ethernet connection to the Local network card:

The connection-specific DNS suffix. :
Description...: Realtek RTL8102E Family PCI - E Fast Ethern
and NIC (NDIS 6.0)
Physical address.... : 00-1E-33-4E-2E-F7
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Autoconfiguration IPv4 address. . : 169.254.74.29 (Preferred)
... Subnet mask: 255.255.0.0.
... Default gateway. :
NetBIOS over TCP/IP...: enabled

Card tunnel Local Area Connection * 6:

State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: isatap. {C41651CC-0B3D-411D-8187-745214 C 69}
B4B}
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes

Card tunnel Local Area Connection * 11:

State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: isatap. {816357D 3-D 8-494C-AA09-F622AE861 44}
0FA}
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes

Card tunnel Local Area Connection * 14:

State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Teredo Tunneling Pseudo-Interface
Physical address.... : 02-00-54-55-4E-01
DHCP active...: No.
Autoconfiguration enabled...: Yes

C:\Users\Brooklyn's >
--------------------------------------------------

Guys, I'm really hitting my head against the wall on this one, and I would be VERY happy for any help through this. Thank you!

I thought about it, there was a corrupted installation of Norton 360, the origin of the problem. I've used the Norton removal tool and voila! Internet! Thank you.

When you access Server Essentials VPN 2012 site, users are unable to print locally.

My company has a Server Essentials of 2012 in a building (A) and several Wi-wired clients and in another building (B). This is not a domain but a pattern of working group because they have a lot of PC which is not the pro version of the OS. Both sites use routers rank consumption high range and NAT with an address range covering192.168.1.XXX.

In building B, there is a wired multifunction printer. Users can access the files via the VPN, but they cannot print locally. When you're connected, ping the address of the printer fails. If they disconnect from VPN they can print without problem. VPN clients are configured in such a way that "use default gateway on remote network" is unchecked. "Enable NetBios over TCP/IP" is selected.

In building A DNS is handled by the server, but in the B building, it is managed by the router.

Is there a way around this problem?

Is there a better place to ask this question?

Thank you!

It is indeed a better place to post: Microsoft Technet forums.

wireless client cannot see wired - WAG320N

Hello

my modem/router WAG320N works fine but the wireless client cannot see wired and vice versa. they are in the same network (192.168.0.), using the same 255.255.255.0 mask, same workgroup firewall and Yes to enable all packages in and out. IP addresses are DHCP form.

Internet sharing works fine, but when im trying to play any game on LAN wireless clients peuvent see their car but not wired. when im trying to client ping wireless from a wired machine it does not either.

What is intresting in a DHCP reservation or the ARP table (in router configuration) I can see cable and wireless customers. but still they do not see each other.

help pls!

Hi again,

I went to PC World and they exchanged this WAG320N to another. but this time I went to ASUS RT - N16 and so far all is working correctly. I know its missing adsl modem but got usb 2 and a print server.

Sorry cisco...

thx for your help guys!

Laptop wireless with NETGEAR router Home Windows Vista detects on the local network and internet

We have a laptop Toshiba Satellite L505-S6946 with Windows Vista on it. We bought a router Netgear Wireless G WGR614V10 a few months ago and installed ok. It worked fine for a few months. Now the network connection to the bottom rhs shows tray icon: 'Local only' for the connection of the SSID, we have implemented. Technical support Netgear has determined that the router works fine. But they noted that the router might get a static IP address in his settings of the adapter wireless Vista. And they said that something should be changed in Vista to a direct connection with the modem works fine for internet access, but it's bulky. Someone please do you suggest to fix this error? Thank you!!!

Hello

A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).

If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

Enable security wireless after you eat to make a functional connection.

----------------------------

The wireless card drivers much also install utility wireless of the seller.

Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

----------------

Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.

Make sure you firewall No. preventing / blocks wireless components to join the network.

Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

party like Hello and NetMagic 3rd network managers can block local traffic too.

---------------------------

Stack TCP/IP (network IP number) of work should look like.

Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

http://www.ezlan.NET/Win7/status-NIC.jpg

Description is the data of the card making.

The physical address is MAC of the card number.

The xx must be a number between 0 and 255 (all xx even number).

YY should be between 0 and 255

ZZ should be between 0 and 255 (zz all the same number.)

The date of the lease must be valid at the present time.

* Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

* Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

Unable to connect to wireless internet; can only connect to the network, saying "Local only" or "limited connectivity".

I have problems to connect to any wireless internet - home, library, coffee shops. He used to work, began to get in trouble (i.e. could not connect sometimes to the diner, but works in the library) and now does not connect to internet AT ALL wireless.

Only connects to the network saying "local only". And I'm lucky even get that much. Furthermore, I don't know if it's a router problem or what, but it does not even accept the password for my home network (my boyfriend has no problem on the internet with Windows 7 and the current router password).

I use a HP G60 laptop (maybe?), I don't remember the model exactly. Windows Vista. I am frustrated beyond belief. I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

In summary: is it a hardware or a software problem? It seems to be a software problem that can have an impact on the material. Nevertheless, what can I do to fix this? Y at - it a software update, I need to try for my wireless card?

This computer is not yet a year old, and already I am unable to use it for the internet. Not very well I plug my ethernet cable router wireless in the library. I bought a laptop for a reason, but it is on track to achieve more like a desktop. Very disappointing.

Someone, please help!

I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

Is this a hardware or a software problem? It seems to be a software problem that can have an impact on the material. Nevertheless, what can I do to fix this? Y at - it a software update, I need to try for my wireless card?

Hello

When the man from BestBuy, fortunately for us technology is not a cleaning product, there is no way of knowing if someone puts his hand on it and knowing what is wrong rather than moving oral reprimand...

First step, log on to the HP support and download the latest drivers for your wireless card.

The HPG60 is a very good phone but its wireless card has problems with old drivers.

In which case it's a hardware problem, contact HP support.

In general, you can use this process to find out what's wrong with the wireless.

Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

Check the Device Manager for the wireless card valid entry.

http://www.ezlan.NET/Win7/net_dm.jpg

If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

http://www.ezlan.NET/Win7/net_connection_tcp.jpg

Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

Make sure you firewall No. preventing / blocks wireless components to join the network.

Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

When the work turns on the Wireless security.

Note * people sometimes make mistakes in writing and retype the password for security.

Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

--------------------------------------------------

I really checked and configured every thing and it doesn't work.

Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

Jack-MVP Windows Networking. WWW.EZLAN.NET

WAP300N: Wireless clients are isolated from my local network?

Similar Questions

Maybe you are looking for