Warranty query

Similar Questions

• Qosmio X 500-fault of screen not covered by the warranty?

  So as said elsewhere the X 500 series has a certain design/manufacturing fault that allows a "shadow" be visible on the entire length of the screen at the height of the taskbar (so don't not visible in windows, but jobs is full screen, like movies, just terrible).

  The attitude of Toshiba is that it is a "limitation of the technology" and not covered by the warranty (which I think is very poor on their part).

  My query is why?

  Given their other 18.4 "models (P500 for example) doesn't seem to have this obvious anomaly, and nor other brands models 18". If it was a limitation of the technology like Toshiba said so surely other models/brands that X 500 would have this anomaly?

  Personally, I think the excuse of "limitation of technology" is just a COP on part Toshibas who do not want to solve the problem on EACH item, I'm sure that the next model (x 600? whatever) will miraculously not the issue and those of us who have decided on Toshiba will continue to say "too bad".

  I searched the net looking for x 500 no descriptions of this "limitation" as we should expect a "limitation of technology" to be as widely reported as their other favorite, the dead pixel but found nothing. It seems this limitation of effects incredibly alone technology Toshiba X 500? Toshiba must think we're gullible.

  My fault however maybe done research, can any that shed light on why only the X 500 has such a terrible mistake and no other models?

  I don't know if this is the right place for these issues.
  It is user forum and I do not think that any of us has access to s secrets Toshiba ;) to see what type of screens are used on the Qosmio X 500.

  I don't know if Qosmio x 500 has new generation screens, but I don't know that Toshiba uses better technology for this model of laptop high-end.
  In the past all Qosmio notebooks are best of the best in all aspects, materials, software and many other software programs.

  Just, I hope not, I am sure, that Toshiba will continue this philosophy for Qosmio range and seems best proof new Qosmio F60.
  I like it a lot but leys see how much it will cost.

  Good bye

• Pavilion 15z-ab100: replacement hard drive under warranty outside the country of purchase

  Hey everybody. I bought a laptop HP the HP online store in the United States in November 2015. I am currently in India and my laptop hard drive has failed and needs to be replaced. My laptop warranty is valid outside the country of purchase (USA)?

  Can I get the hard drive replaced under warranty in India, even if I bought the laptop in the United States? I read somewhere that the replacement of equipment under warranty can be done in the country of purchase. Is this true?

  Hi @Prad3791,

  Thank you for your query.

  I understand that you bought your laptop in the USA but are now in India and the hard drive has failed.  Want to know the overall guarantee of HP.  Here is a document which will answer this question for you:

  HP - worldwide warranty and FAQS

  This is a great question other clients may also wonder; Please click on the ""Accept as Solution " if you think that this message has helped you, or could help others." You can say thank you easily by clicking on the ""Thumbs Up " below!"

• need battery warranty certificate

  Hello Sir / mam

  I speak for the nearest care of hp and they told me that I have only 1 year warranty. I talk about tem above conversation and they tell me that it must show written hp support that show that I have 3 years warranty. Please send me written letter that I have have 3 years warranty on my battery.

  Battery details more than conversation. You can send me the pdf on my email [email protected]

  and I submit my purchase invoice.

  http://h30434.www3.HP.com/T5/notebook-hardware/query-about-battery-warranty/m-p/3030851#M108684- it's the usher said support hp form tha I have 3 years warranty and I fix my Bill.

  

  concerning

  Akshay vishnoi

  Hello akshay44,

  These are technical support forums, I will paste a link below for warranty issues:

  Validation of the warranty HP Consumer HP Support

  Filling out the form above should help your warranty issue is resolved.

• Need help to write a better SQL query

  Hi gurus,

  Please let me know your best query for the problem below:

  Suppose we have 2 tables in Oracle 10 G database:

  IM1: product and warranty sales records

  A: sales_id

  B: product QTY.

  C: quantity of product

  D: Service QTY.

  E: Service amount

  IM1 table:

  a b c d and e

  --  --  ----  --- ---

  1 1 100 1 10

  2 1 150 1 70

  3 2 500 1 100

  4 1 100 0 0

  IM2: brand and product guarantee service term associated with record sales

  A: sales_id

  G: the Service life

  P: brand product of

  Z: flag of product/Service

  IM2 table:

  a    g               p          z

  --  ----------    -----------   -----

  1 sony NULL p

  1 monthly NULL g

  Dell 2 p, NULL reference

  Reg 2 g NULL

  NULL lenovo 3 p

  3 monthly NULL g

  Sony NULL 4 p

  Then, he must bring the "term of Service" and "Brand product" in line with the sales table, as below:

  ID h_qty h_amnt g_qty g_amnt brand term

  --  -------  -----------  --------  ----------  ---------    ----------

  1 1 100 1 10 sony monthly

  2 1 150 1 70 dell Reg

  3 2 500 1 100 lenovo monthly

  4 1 100 0 0 sony NULL

  What I wrote myself is as below, but I want to know if there is a better idea to make the query more reliable, because real paintings are big and my query is slow.

  SELECT DISTINCT

  ID of the s.a,

  s.b h_qyt,

  s.c. h_amnt,

  Virginia g_qty,

  Sager g_amnt

  brand of the PDP,

  term of r.g

  Of

  (SELECT s.*, PDP FROM s im1, im2 p WHERE s.a = p.a. PDP AND IS NOT NULL).

  IM2 p,

  IM2 g

  WHERE s.a. = p.a.

  AND s.a. = g.a

  AND (p.z = 'p' AND WINS = 'g')

  OR (p.z = 'p' AND WINS = 'p' AND sagehomme = 0 AND s.p = pp)

  ORDER BY 1;

  Here you will find the table scripts:

  create table im1 (a number, b, c number, number d, e number);
  create table im2 (a number g char (10), char (10) p, z (1) tank);
  insert into values im1 (1,1,100,1,10);
  insert into values im1 (2,1,150,1,70);
  insert into values im1 (3,2,500,1,100);
  insert into values im1 (4,1,100,0,0);

  Insert in im2 values (1, null, 'sony', 'p');
  Insert in im2 values (1, 'Monthly', null, 'g');
  Insert in im2 values (2, null, 'dell', 'p');
  Insert in im2 values (2, 'Reg', null, 'g');
  Insert in im2 values (3, null, 'lenovo', 'p');
  Insert in im2 values (3, 'Monthly', null, 'g');
  Insert in im2 values (4, null, 'sony', 'p');

  something like below

  Select x.a as id, x.b as h_qty, x.c as h_amnt, Eliane as g_qty, x.e as g_amnt, min (y.p) as min (y.g) as mark

  -min (y.p) compared to (x.a partition) as min (y.g) on (x.a partition) as the term mark
  of im1, im2 XY
  where x.a = y.a
  Group of x.a, x.b, x.c, Eliane x.e

  Edited: putting aggregation function instead of the function min min Analytics

• Error creating the pie chart to 3D with query complex.

  Hi all

  I tried to create a pie 3D with the following query:

  SELECT THE NULL LINK,

  LABEL CRITERIA,

  DIGITAL VALUE

  Of

  (SELECT CRITERIA, COUNT (*) AS 'NUMBER'

  DE)

  SELECT AIRCRAFT_REGO AS "REGO",.

  'HOLD OPEN' as "CRITERIA", he said.

  CNTOPEN AS 'COUNT '.

  OF UTEV0001 HAS

  INNER JOIN (select ACFTABB, count (ACFTABB) as CNTOPEN)

  of SIMLOG

  "where ACDFRCYC = s"

  AND OPENHODM = 'O'

  AND ACDFITMX = 'Y '.

  ACFTABB GROUP

  order of ACFTABB) B

  ON B.ACFTABB = A.AIRCRAFT_REGO

  WHERE AUDTCURI = 'C '.

  UNION

  SELECT AIRCRAFT_REGO AS "REGO",.

  "NOT PROCESSED" as of "CRITERIA", he said.

  CNTACTN AS 'COUNT '.

  OF UTEV0001 X

  JOIN IN-HOUSE

  (select ACFTABB, count (ACFTABB) as CNTACTN

  of SIMLOG

  "where ACDFRCYC = s"

  AND ACDFATN = "

  AND AFFECTED = "

  ACFTABB GROUP

  order of ACFTABB) C

  ON X.AIRCRAFT_REGO = C.ACFTABB

  WHERE AUDTCURI = 'C '.

  UNION

  SELECT AIRCRAFT_REGO AS "REGO",.

  "FAILURE to KNOWN" as "CRITERIA", he said.

  CNTKNOW AS 'COUNT '.

  OF UTEV0001 Y

  INNER JOIN (SELECT ACFTABB, COUNT (ACFTABB) AS CNTKNOW

  OF SIMLOG

  WHERE ACDFRCYC = S"

  AND AFFECTED = 'DEVELOPMENT '.

  ACFTABB GROUP

  order of ACFTABB) D

  ON Y.AIRCRAFT_REGO = D.ACFTABB

  WHERE AUDTCURI = 'C '.

  UNION

  SELECT AIRCRAFT_REGO AS "REGO",.

  'WARRANTY FAILURES' as "CRITERIA", he said.

  CNTWARNT AS 'COUNT '.

  OF UTEV0001 Z

  INNER JOIN (SELECT ACFTABB, COUNT (ACFTABB) AS CNTWARNT

  OF SIMLOG

  WHERE ACDFRCYC = S"

  AND GUARANTEED = 'Y '.

  ACFTABB GROUP

  order of ACFTABB) E

  ON Z.AIRCRAFT_REGO = E.ACFTABB

  WHERE AUDTCURI = 'C '.

  UNION

  SELECT AIRCRAFT_REGO AS "REGO",.

  "REFER CONTROLLER" as of "CRITERIA", he said.

  CNTCONT AS 'COUNT '.

  OF UTEV0001 V

  INNER JOIN (SELECT ACFTABB, COUNT (ACFTABB) AS CNTCONT

  OF SIMLOG

  WHERE ACDFRCYC = S"

  AND AFFECTED LIKE '% CONTROLLER '.

  ACFTABB GROUP

  order of ACFTABB) F

  ON V.AIRCRAFT_REGO = F.ACFTABB

  WHERE AUDTCURI = 'C')

  CRITERIA GROUP)

  Using this query, I get the following error "failed to parse the SQL query! "

  But when I use the query used to create the table here. It works perfectly fine.

  Could someone help me please.

  Hi Ajay,

  I would say it is your use of the key word 'number '. I would like to change it to "MY_COUNT" or something.

  I certainly expect

  SELECT THE NULL LINK,

  LABEL CRITERIA,

  DIGITAL VALUE

  fail because of the number keyword.

  Kofi

• Interesting query

  create table plch_table (id number, val varchar2(100));
  
  begin
    insert into plch_table
      select level, rpad(level, 100, 'X')
        from dual
        connect by level <= 100000;
    commit;
  end;
  / 
  
  I then create a package:
   create or replace package plch_cnt is
    g pls_integer;
  end;
  / 
  
  Then I created plch_func that returns 1 and increments the package-based counter:
   create or replace function plch_func
    return number
  is
  begin
    plch_cnt.g := plch_cnt.g + 1;
    return 1;
  end;
  / 
  
  Then I execute the following block:
   declare
    dummy_val plch_table.val%type;
  begin
    plch_cnt.g := 0;
  
    select max(val)
      into dummy_val
      from plch_table t
     where t.id = plch_func;
  
    dbms_output.put_line('plch_cnt.g = '||plch_cnt.g);
  end;
  / 

  The output of this block is
  plch_cnt.g = 100000
  
  
  I understand a part of the question but a part. I wonder, how is this query runs 100000 times because there's only a single id that is 1.
  
  I average is not what it means:
  
  Select max (val)
  in dummy_val
  of plch_table t
  where t.id = 1;
  
  because the function returns only 1?
  
  
  Thanks for your help.

  947388 wrote:

  First of all, means 'cheese Switzerland "?

  Swiss cheese refers to data files used extensions scattered throughout the file data. Then, when you, for example, to insert data into a table that oracle will seek a free measure, start inserting and how is completely filled it will search next free extent. And so on and so forth. So the data in the table will reside in several extensions. And there is no extended warranty will be read in the same order they were filled. Now on "because the function always returns 1, isn't?". Yes, I forgot who. But does not change the image. You are running:

    select max(val)
      into dummy_val
      from plch_table t
     where t.id = plch_func;
  

  Oracle will read the first line calls function plch_func and compares it with the result of the function plch_func. When the function is called package global variable plch_cnt.g is incrementd and becomes 1. Oracle then reads the second row. And again call the function which increments again plch_cnt.g. And so on and so forth. You must understand the difference between SEO function defined by the user in the list of selection in relation to where clause. If is referenced in defined user list selection function is called for each retrieved row so that when they are referenced in the where clause can be called for each potential oracle row leans. You can also read about deterministic functions (although it guarantees no function will be called once). chris227 has already given workaround to call function only once.

  SY.

• E530 270 days warranty period?

  I just bought an E530 3259 NZQHGUK and 3 years on site warranty.  On the installation of the PC for the first time, he informs me that the guarantee, which should be 1 year, expires in 270 days.  It was four days ago now 266 and counting...

  PC World Business has no answer only to the refer to Lenovo, for which there is no obvious route for this query.  I would like to fix this before I try to register on the spot and make the problem worse.

  270 days is a suspiciously round number - is this usual?  I can't find any reference in the search of the forum.  PC World denies that the machine has been sold previously!

  It's probably the phone have been sitting in the store of retail for some time. You must call Lenovo customer service and provide them with a Bill, they might help you to reset the warranty from the date of purchase.

• Help me with query

  Hi Please help me write a sql query to convert data from the source table to the destination table, as shown in the example given below.
  
  Destination table for the source table
  CRAZY ACCT DATA CRAZY D1 D2
  11000 007 AA AA A11 11000
  11000 013 BB B11 11001 A11
  11001 11002 C11 BB CC 007
  11001 013 B11
  11002 007 CC
  11002 013 C11
  
  RDS,
  Naga

  insert into dest_table
  select s1.fou, s1.data, s2.data
  from src_table s1
      ,src_table s2
  where s1.fou = s2.fou
    and s1.act = '007'
    and s2.act = '013'
  

  No warranty with regard to performance... (could be bad if src_table is huge).

• can I still add to apple care if the warranty has expired?

  can I still add to apple care if the warranty has expired?

  No, if it is out of warranty, if it is for a Mac: http://www.apple.com/support/products/mac.html

  The AppleCare Protection Plan can be purchased as long as your Mac is still covered by the limited warranty of one year.

• repair iphone warranty in Cambodia

  How can I get my iphone repaired when you live in Cambodia? iPhone 6 s, bought the Birmingham UK Airport, August 16, 2016, screen went black 3 weeks ago, does not work, no phone number to ring to Cambodia I can do? John Wharmby p/n + 883754699.

  You must take the device to a EU country. Phones purchased in the United Kingdom, cannot be repaired than in the United Kingdom or another country of the EU. For purposes of the warranty, the warranty is valid in the country of purchase, but the EU is considered to be a country. You cannot ship to Apple, they will refuse international shipments.

• Out of warranty issue

  I have an iPhone 6 I dropped in the water more than a month. I really took the trouble with it since the 7 came out, so I used an old 5 while I waited for my 7.

  Now, 5 s wife is listening on and wanted a new iPhone. She is ok with me trying to fix my iPhone water damage and give him. My questions are...

  1. it has been over 2 years since I had 6. Can I still benefit for the abandonment of the guarantee program to buy a refurbished for really cheap? I think I can find my box with the front desk.

  2. don't buy me a 7 ruin my chances to give up my broken 6 for the discounted price?

  Yes, you must qualify again for the release of replacement under warranty. It does not need to have the receipt, warranty and after warranty are for the device by serial number.

  The purchase of the iPhone 7 has nothing to do with another iPhone.

• Chargers apple has a warranty on them?

  IF I buy a charger from Best Buy, it will be guaranteed? Or do I have to buy it from Apple? Can I get a warranty on this subject if I just bought a charger?

  Hello

  Accessories supply Apple are covered under limited warranty a year Apple against any material or manufacturing defect, but not against accidental damage or misuse.

  This applies if the product is purchased directly from Apple or an Apple authorized reseller.

• International warranty for iPhone

  Hello, I would like to know if it is possible to obtain an international warranty from Apple? I found a lot of different answers to this question on the internet. I would buy the iPhone to the Canada, but after two months, I go to the Czech Republic. I don't really know if in case some disorders can I use the service of Apple in Europe? Thanks much for the tips

  N ° guarantee the iPhone has never been international.

• iPhone 7 international warranty

  I intend to buy the new iphone 7 as a gift for my brother. I am currently here in Kuwait, but there is no authorized dealer for apple want to know if I have a defect in one year in the philippines or my brother used to travel many times International. There is a dealer in my country.

  The iPhone lacks an international warranty.