Watermark will not work for export?

Similar Questions

• Some programs will not work for me as an administrator, but will work for other users on the same computer.

  Original title: some programs will not work for me as an administrator, but will work for other users on the same computer. I did a system restore as well as uninstalling and reinstalling programs that do not work without result.

  Did you run the System File Checker?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Try Safe Mode (you have this problem in Mode safe?).

  315222 - a Description of the Options in Windows XP (or Vista) Safe Mode boot
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;315222&FR=1&PA=1&SD=HSCH

  If you cannot reproduce the errors in Mode safe see if you can further isolate the cause.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  First try checking not be (read-only) to see if it reports any problems file or hard drive.  If this is the case, start by checking the two boxes, in no other rerun.

  Create another user and see if they have the same problem as your current user.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  811151 - how to copy user data to a new user profile
  http://support.Microsoft.com/?kbid=811151

  Description of Windows Easy Transfer for Windows Vista
  http://support.Microsoft.com/kb/928635

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222/#appliesTo

• Cs5 serial number will not work for cs5.5

  I have cs5 design creative premuim on my old laptop, but he struggled to run it. Recently I got a new laptop and that you want to put on there, only to find, I have misplaced the disc and tried downlaoding but I can't download cs5 more. I have dowlaoded cs5.5 but my cs5 serial number works help I need to use it as soon as possible and the trial has run out

  Cs5 serial number will not work in cs5.5, they are dependent on version.

  You can download the cs5 'prodesigntools.com' and then install the software.

  Write a DVD or make a backup of the files downloaded for later use.

• Automatic enforcement functions will not work for DVD/CD

  Original title: why its worked?
   
  Sorry for the bad English - 1
  I had to try evrything difficulty autoplay in xp. Autofix.exe even. Autofix.exe just fix usb drive autoplay, but it cannot correct autoplay CD and DVD (I mean autorun.inf). I was trying every key "reg" but once again does not and I was try recovery console. I just did THIS:
  MD tmp
  copy c:\windows\system32\config\system c:\windows\tmp\system.bak
  copy c:\windows\system32\config\software c:\windows\tmp\software.bak
  Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
  copy c:\windows\system32\config\security c:\windows\tmp\security.bak
  copy c:\windows\system32\config\default c:\windows\tmp\default.bak
   
  AAAAAAnd his works
  And it is: Whay he worked?

  Hello

  1. what exactly you are trying to do?

  2. you are trying to disable the AutoPlay features?

  The command you provided is copy the registry values in the file that you create by using the command, where it is not related to AutoPlay functions.

  I suggest you to follow the article below:

  The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  http://support.Microsoft.com/kb/330135

  Reference:

  http://support.Microsoft.com/kb/967715

  I hope that helps!

• Windows Easy Transfer will not work for me between my old laptop with Windows XP and my new laptop with Windows 7.

  I am trying to transfer my files to my new laptop with Windows 7 for my old laptop with Windows XP Professional, using the Windows Easy Transfer, that I found on my old laptop.   I tried to make the transfer through my home wireless network and when that did not work...  I connected the two laptops with a cable (the same style of cable, used to connect his computer to a modem or router, not a cable SSB).

  So in summary, I just want to transfer all my files from my old laptop to my new laptop.   I copied the master file of my data from my old laptop on a "stick" assuming that I could download just to stick to the new laptop.  (I have a lot of "sticks" here.)   The idea did not work, of course, results otherwise wouldn't ask this question now.

  If you had previously copied simply data (documents folders) via a key files should be no problem during the copying of that stick to the library on win7 locations, and is there's this which is exactly the err MSG?

• Site WRT160N access restrictions will not work for https sites

  I configured a Web site blocking blocks http:// political access successfullywww.facebook.com on a WRT160N V1 v1.02.2.  I did it by entering www.facebook.com as URL #1 and "facebook" as a keyword and it works very well.  However, I have found that this policy does not prevent https:\\www.facebook.com.  Looks like the keyword would be able to block it but it does not work.  Help, please.

  It is not possible to block HTTPS web sites because the URLs are transmitted encrypted and therefore are not readable by the router...

• Embedded video html will not work for mobile

  Hello

  I have a video embessed successfully on my desktop site, but I can't make it work for mobile:

  You can see here on the desktop: MTV ART HOUSE MOSCOW

  I put the same code in the mobile version, I didn't change the width and height, can someone please help me solve this problem?

  < video controls = "orders" preload = 'auto' width = '1010' height = "581" autoplay = "autoplay" >

  < src = "assets/source trailer.mp4' type =" video/mp4">"

  < / video >

  For mobile I changed it to:

  < video controls = "orders" preload = "auto" width = "290" height = "171" autoplay = "autoplay" >

  < src = "assets/source trailer.mp4' type =" video/mp4">"

  < / video >

  Hello

  Please try to enter the code below in the phone layout. (I've marked the change in bold)

  ".. /Assets/trailer.MP4' type = "video/mp4" >

  Muse create a phone available in a new folder named like 'Phone' as there is no active folder we need to correct the path of the directory in the phone layout. I corrected that in your code.

  Concerning

  Vivek

• CS5 serial number will not work for 5.5 upgrade

  I have the Master Collection CS5 and bought Dreamweaver 5.5 upgrade. But when I try to enter my number of CS5 it says it is not valid for this product. Is it possible to determine what is the stand-alone version of Dreamweaver S #? I don't see any documentation on this.

  Thank you!

  You are unable to move from individual products in a suite collection. You need to upgrade the entire suite as a unit.

• System Restore will not work for any date and computer says that it is running in auto mode.

  I have a 30 GB master and slave of 160 GB. 26/03/11 I copied a large file of 11 GB of the master to the slave because I received alerts that the disc was or almost. After you have copied from C to D, I deleted the C file and the missing file of the two drives. I tried to use the restore of the system without result. No matter what I do "Unsuccessful System Recovery" is the only message I get. Is it possible to recover a file that took me hours to compile it?

  This looks like a self-inflicted wound / pilot error.

  Deleting files in the Recycle Bin does not release disk space.  When you delete things in the trash, all you really do behind the scenes moves the items from one folder to another folder (the folder to the Recycle Bin).  They always take place until you clear items from the trash.

  System Restore won't help you recover personal files anyway - this isn't what he does.  SR cares your personal files.

  A backup will help recovery of personal files.

  I think it's against the rules for people at Microsoft to suggest or sometimes even to read all the information of any URL Internet that does not begin with microsoft.com, where the previous warning about third party programs.

  However, I think that to get off the beaten track (as they say).

  This is a popular program of third party who sometimes helps to recover accidentally deleted files:

  http://www.Piriform.com/Recuva

  It may be too late for your files, but I would also check the configuration of your trash if you have several volumes of hard drive from your symptoms question do not quite add up correctly.

  Even if SR would not help in this case, your SR expected still works what is another potential problem to solve.

  Now I'm folding stock and return things to the technical support engineers.

• My KEY will not work for both windows 7 32-bit update and 64-bit version?

  I have two, a copy and a key for the upgrade to Windows 7, 32-bit and 64-bit.  (Key separately for each version, purchased about 6 months apart.)

  The computer that is running the 32-bit version had a hard drive failure.   After replacing the hard drive, I decided to install 64-bit on this computer using the key provided with the 32-bit version.

  I was led to believe that the key is not related to the 64 or 32 bit version and that it could be used for both, but only installed at the moment.

  After getting to step to enter the key, using the key provided with the 32-bit version, he couldn't say invalid key.  After several attempts and checking of typo, it's a no go.

  So, I went and started around and installed the 32 bit version and the key worked fine.

  So the key provided with the 32-bit version of 'upgrade' tied to only this version?  Every search I do, says that you can use the key for 32 or 64 bit.  They never mention the version "upgrade" is different from the "full" version

  Thanks for any info,

  SDM

  Because it is an upgrade version.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  So using phone activation is the work around:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Why Adobe Shockwave Player will not work for iSketch?

  There is an online game called iSketch - which is actually a pictionary online game - that requires Adobe Shockwave Player. However, I and many other Mac users can't play for some reason any. Whenever I try to play the game, this message always appears at the top:

  "Shockwave error ."

  This Shockwave animation there are errors which have caused problems of reading.

  Please contact the author of this content about this problem.

  Shockwave is unable to continue. »

  Apparently, Mac users such as I was not able to play the game since the year last because of this problem. Today, I downloaded the latest version of Shockwave (12.1.1.151) in the hope that the problem would have been resolved, but unfortunately it didn't. I've tested to see if Adobe Shockwave Player is even working on my Mac, and Yes, it is. I tried to play the game in Safari, Firefox, and Google Chrome, but the game is always does not. I must say it's very frustrating.

  
  

  Moreover, my Mac is the version OS X Mavericks (10.9.2), and Yes, the iSketch site was aware of this problem since they have been alerted to this topic last year.

  I (and many others) would be extremely grateful if this problem can be solved.

  ~ NinjaRisa

  Unfortunately, iSketch developers should handle this themselves. The error message suggests something wrong with their Director of film and is not something inherent to the Shockwave Player

• Subscription will not work for CS5

  Recently, I tried to re - install Photoshop CS5 on my computer and my series is legitimate or accepted, Photoshop leads me to the statements that he cannot start my subscription and will be propmt me once I restart photoshop to start of such subscription. However, when I try to do, it starts the process. What's wrong?

  You did not no information system, or none of that, so generic questions activation to something on your system interfere all that we can do is guess autour. In any case, this kind of things is better managed by calling support. Also, check on your account that your subscription is actually still active.

  Mylenium

• Automatic play button and the game will not work for videos

  I'm reading a video (the Web site supports .webm, .ogv, mp4), but neither autoplay, or the Start button seems to work. However, if I slide the button to the right (+/-40 sec) play video.

  I tried a lot of solutions suggested in other threads (potential disabling conflicting plugins, reset Firefox, etc.) but none of them work.

  What Miss me?

  The problem has an easy solution: changing the order of the videos, first list the source .mp4 and according to the source made .webm video running under Firefox, explore and Chrome.

  Does anyone know why?

• &lt; input type = "hidden" name = "h_id" value = "$h_id" &gt; will not work (for me at least...)

  Hi all In my add new registration form I have a text field hidden that I try to use to insert a value in my database. This numeric value is contained in the variable $h_id, which came from a $SESSION variable. I checked and it exists. The error I get MySQL on submit tells me I'm trying to save a value to text in a numeric field. This means that the value in the hidden field is not save as a number but as text 'h_id' instead of the value 1.  No idea what I am doing wrong here? I thought you could use variables in a hidden field.

  This is the hidden field code:

  < input type = "hidden" name = "h_id" value = "$h_id" >

  Here is the MySQL error:

  Cannot add or update a child row: a foreign key constraint fails ("outercircledb". 'cof_detail', CONSTRAINT 'FK_cof_detail' FOREIGN KEY ('h_id') REFERENCES 'cof_header' ('h_id'))

  Kind regards

  Robert

  You should echo your value field. PHP cannot retrieve fields of identification "such what."

  Your code should be like this:

  if(array_key_exists('h_id', $_GET)) {
     $id = (int) $_GET['h_id'];
}
?>

  
      
      
  

  


• Aero does not work for me, but works with the guest account.

  From: Tony Burke

  I have a new laptop with Vista Home Premium. Aero works OK when the guest account is connected but will not work for me in my administrator account - all settings etc are correct, but when I set to Aero, he returned to Vista Basic.

  Any suggestions?

  From: Paul Smith

  There is probably some software running which disables it.  Stuff as Java always calls the API legacy to draw graphics that allows Windows to the old mode rescue.

  If you click Start, and then type "Defender" Windows Defender should appear, from there, you can use the 'explore software' (under Tools) to try to disable all applications that are running on login.

  --

  Paul Smith,

  Yeovil, United Kingdom.

  Microsoft MVP Windows Shell/User.

  http://www.dasmirnov.net/blog/

  http://www.windowsresource.NET/

  * Remove nospam. to reply to the e-mail

  Another response of the community of Windows Vista discussion groups