We are sorry internal error?

Similar Questions

• Cannot install 2 black & white or command conquer games. Error:Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

  The error occurs when I insert the game black & white 2 or command and conquer the first decade and click install on a automotive screens popping up, I am sure that these two errors are almost identical and sure if one is fixed so will the other be.

  The error that says "Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »

  To try to fix it already I found a page here which tells me how to install drivers different installshield, and I installed everything that have been listed. My operating system is Windows Xp home edition

  Hello
  
  Were you able to install these games without any problem before?
  Step 1: Install all updates of windows on your computer and check the number.
  Reference: http://support.microsoft.com/kb/306525 
  
  Step 2: Copy the game on your computer, then check the issue.

  Step 3: Perform the clean boot your computer.

  
  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135
  Note: To restore your computer to a Normal startup mode, follow these steps:
  
  1. click on start in the box start the search.
  2. type msconfig and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.
  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How can I fix error Pure Networks Platform Service has encountered a problem and needs to close. We are sorry for the inconvenience.

  Whenever my computer load I get this darn error. Pure Networks Platform Service has encountered a problem and needs to close.  We are sorry for the inconvenience. I also get a pop up nmsrvc.exe Application error. The statement as "0x66f23ff0" referenced memory at "0x00000000". The memory could not be 'read' PLEASE HELP!

  Hi heat110,
   
  -What is the brand and model of the router you are using?
   
  -You "Network Magic" software installed on your computer?
   
  Method 1: As a first step, try to restart the service of Pure platform of networks on your computer.
   
  Follow these steps to do the same thing:
   
  a. Click Start. Click run. Type Services.msc and press ENTER.
   
  (b) in the Services window, search for Pure Networks Platform service.
   
  c. right-click on the service and click on restart.
   
  d. restart the computer and check if you have got rid of the error message.
   
  Method 2: Uninstall Network Magic software and then re - install the software by downloading from the website of the manufacturer if necessary.

• When I start the software Black Berry via the Office to receive the error message "the Black Berry Desktop software has encountered a problem and needs to close. We are sorry for the inconvenience. »

  Original Titus: cannot install software blackberry "BOLD"

  When I start the software Black Berry through the icon to the desktop, the windows error reporting or display below:

  Quote: Black Berry Desktop has encountered a problem and needs to close. We are sorry for the inconvenience.

  If you were in the middle of something, the information you were working on might be lost.

  Please tell this problem to Microsoft.

  We have created an error report that you can send improve us Black Berry Desktop Software. We will treat this report as confidential and anonyomous.

  End of quote

  What data means this error report contain?

  Why should I report to Microsoft?

  I received error below during the repair software blackberry

  Quote: The path:

  ' C:\DOCUME "1\HLZUTS" 2\LOCALS "1\TEMP\WZSE1. Berry TEMP\BLACK Office software.msi' is not found. Make sure you have access to this location and try again, or try to find the installation package "Black Berry Desktop Software.msi" as a folder that you can install the Black Berry Desktop Software 6.1 product

  End of quote

  No path

  Hi ZiaHL,

  Try the steps listed in the article mentioned below and check if it helps you to fix the problem:

  "BlackBerry Desktop Manager has encountered a problem and needs to close. We are sorry for the inconvenience. "during the synchronization process

  http://BTSC.webapps.BlackBerry.com/BTSC/dynamickc.do?externalId=KB10340&sliceId=&command=show&forward=nonthreadedKC&kcId=KB10340

  You can also view the article mentioned below for more information:

   

  BlackBerry Desktop Software issues fixed in this release

  http://docs.BlackBerry.com/en/Admin/deliverables/20936/BlackBerry_Desktop_Software_Fixed_904527_11.jsp

  Let us know if that helps.

• Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Techincal Suport...  (INVALID_QUERY: XMLList object)?

  After a number of years of service, my Adobe Premiere CS4 gives me the following error message:

  Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Technical Support...  (INVALID_QUERY: XMLList object).

  I use this software on an old Dell desktop computer to two year with many members and drive.  It is a stand-alone application, not connected to a server.

  Anyone have any ideas on how to solve this problem?

  I think it has to do with the central resource is no longer supported.  Everything works OK if you ignore the message?

• Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.  Error code: c0000005 address: 76f73ac3 I clicked the OK button and the closed Downloader.     I then tried to download from the Organizer. I have

  Photoshop Elements 12

  Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.

  Error code: c0000005

  Address: 75e32f71

  I clicked on the OK button and the closed Downloader.

  I did a search on this (c0000005) error code and it seems to be a work around, but no solutions, why is this? I ask that because that this problem seems to be years and years, dating back to at least 2005 (math is 10 years do).

  I don't even have the hanging camera and I get this error on download.  I have redownloaded everything and reinstalled.  I allso see AVI issues reported with this problem, so I've updated Quicktime that without the camera being hung when I get this error I wasn't expecting it to work.  I tried to support and they would not help because I bought it in March this year.  Quite frustrating because I bought elements about every 2 years.  I think I might need a new codec?   I had this problem on an earlier version and I think I remember that being the fix, but it may be something completely different

  Finally, I found it lacking a photo so the catalogue was "corrupted".  I just deleted the image and it started working.

  I hate Adobe and their total lack of support - thanks for nothing Adobe.  Also get this - they offered me to upgrade to 13.0 (12.0 My is only 6 months old but they still can't stand on errors.  Install only the errors!

  I've upgraded and buy this product 4 times now.  I'll find something else next time!

• Validate the recovery area / files results in RMAN-00600: internal error

  Dear members,
  
  I did experience (specifically RMAN) with Oracle 11.1.0.7 on instance AWS (amazon delegating thingy).
  

  SQL> select * from v$version;
  
  Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
  PL/SQL Release 11.1.0.7.0 - Production
  CORE    11.1.0.7.0      Production
  TNS for Linux: Version 11.1.0.7.0 - Production
  NLSRTL Version 11.1.0.7.0 - Production

  Database instance works fine, so far.
  However when I try to VALIDATE the recovery or file BOX, she translates RMAN-0600 as follows...

  RMAN> validate recovery area;
  
  Starting validate at 15-JUN-12
  using channel ORA_DISK_1
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of validate command at 06/15/2012 19:00:33
  RMAN-00600: internal error, arguments [8708] [] [] [] []

  Any help is greatly appreciated.
  Sincerely,
  Jennifer B.
  
  PS:
  All others to VALIDATE the options work great.
  One runs in such situation? I searched for his MOS, Google and this forum but nothing helped :-(

  Hello;

  I'm pretty sure it's a bug.

  It is an Oracle noted that while not an exact match is very, very close.

  VALIDATE ARCHIVELOG ALL fails with RMAN-00600 [8708] [974813.1 ID]

  Best regards

  mseberg

• Internal error in safari on download (navigation finder via safari)

  Hello

  I have a problem with Safari. Whenever I try to send, or upload a file, or just browse the finder (see imageView imageView imagehttps://www.google.co.uk/url?sa=i & rct = j & q = & esrc = s & source = image & cd = & cad = AJLN uact = 8 & ved = 0ahUKEwiD-JO9taPOAhVrI8AKHZgMCkUQjBwIBA & url=http%3A%2F%2Fcdn.osxdaily.com %2Fwp-content%2Fuploads%2F2014%2F12%2FSHRINK-SAVE-DIALOG-WINDOW-OS-X.jpg & bvm = bv. 128617741 d.ZGg & lb/po2 = AFQjCNE-8daDlrJRNqFPh3oWGIrw26bWaw & 1470250870765789 = ust) I get an internal error like this :

  

  Details of the accident report are:

  http://pastebin.com/Q8gH5LQp

  Any help would be appreciated. Thanks in advance.

  Moreover, the accident report is when I tried to use Google Chrome, and the screenshot in the thread above was when I was with Safari.

• 500 internal Error Privoxy keeps occurring when I load the page.

  I get an internal error 500 of Privoxy when I open http://www.thoroughbredgt.com/

  Error reads: Privoxy has encountered an error while processing your request:

  Unable to load template file without Server-data or one of its components included.

  Please contact your administrator for the proxy.

  If you are the administrator of the proxy, please put the files required in the (confdir) / templates directory. The location of the directory (confdir) is specified in the main Privoxy configuration file. (It is usually the installation of Privoxy directory).

  I can't understand how to solve the problem. Any help?

  I have not had any problems.
  Try this link; http://www.thoroughbredgt.com/

  It could be that there is something to block this site, like a firewall.
  Contact your provider and ask questions. Try the link on another
  computer, or another browser.

• How can I fix tis (sorry, an error has occurred while processing your request.)

  When I try to go to traegergrills.com I get this message (sorry, an error has occurred while processing your request.) I can go on my other computer?

  This can be caused by corrupted cookies or cookies are blocked (check the permissions on the subject: permissions page).

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

• 15 u-010dx 360 touch screen: battery internal error: 601 on laptop HP 15-u010dx 360

  My phone receives an error page indicating: internal error battery 601, will need to be replaced.
  
  I had the laptop for less than a year and would like to know if this would be covered by a warranty of any kind, or how do I do to get this problem?
  
  Thank you!

  Hello

  The 601 error is actually a bit misleading - it refers to your main notebook lithium-ion and not the cell RTC (cmos) on the system board, as it seems to suggest.  It usually begins to appear when the battery capacity when fell below 25% of its original value.  Further details on this on the next Document in HP.

  http://support.HP.com/us-en/document/c01443470

  The battery will be covered under the same term as your laptop, so just contact HP and will make replace - if necessary, you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• An internal error occurred during the processing of this Mathscript

  I tried to run a ".m" file it starts with a number of % "commented" statements to help the program implemented. "  I get this error as above as "internal error in row 0, then the error message. Please notify it is a problem using % or else where in the program?

  Chuck

  Hello Chuck,

  This error indicates there is something in your script that LabVIEW MathScript did not understand.  As such, it depends on the script that you typed.  Is it possible to attach your script?  If this isn't the case, you can try a binary search with your script.  Remove half of your script.  If the problem persists, the culprit is in the half top.  Remove half of the upper part of the half and reaffirm.  If this isn't the case, it is at the bottom half.  Add in half of the text you removed and try again.  After you have identified where the problem occurs, you can try to simply the script by removing other lines that are not necessary to run the problem line.  If then you can put what you have, I can investigate on what is wrong.

  It is possible that comes to mind if you perform a replacement of indexation of the following form:
  [(m, n) vs s] =
  In other words, one of the values of multiple return putting inside another matrix.  A solution for this is to do the following:
  [s] = so.
  vs (m, n) = a;

  Grant M.
  Staff software engineer | LabVIEW Math & Signal Processing | National Instruments

• Internal error OR-farm - impossible to compile the FPGA VI

  Hello!

  When I try to compile any FPGA VI with LabVIEW2013 or 2012 SP1, I get the following error:

  "Year error occurred trying to connect to this server compilation."

  Details:

  Internal error OR the farm: Client Server received unexpected or bad data. »

  Intermediate files are not generated, the error message appears immediately after I have select build of build specification or I click the run arrow.

  I use the local server for compilation.

  The equipment I use: CompactRIO Evaluation Board - SbRIO9636, DELL laptop, Intel core2 Duo T5800, 2 GHz, 3 GB RAM, Windows 7 Ultimate 64-bit, SP1.

  The intermediate files CAN be generated without any problems if I select in the menu. If I run the FPGA application compile worker, a ToolTip message specifying that "FPGA compile runs", but after a few seconds, another message appears: newspaper several attempts were unsuccessful - please see attached images.

  At first, I thought that my firewall (Comodo 6.3) is the reason for this, so I disabled it but nothing changed. Then I tried to fix LabVIEW FPGA and XILINX tools with the firewall disabled but din do not solve the problem. I tried with LabVIEW SP1 of 2012 and 2013.

  If you have any suggestions, please let me know! Thank you!

  

  

  We would like that you try to reset the NIAuth database by following these steps:

  1. go to Windows Services (Bring up Windows with Ctrl + Alt + Delete Task Manager, click the Services tab, click the Services button at the bottom right of the window.

  2 stop the NI Application Web Server and NI System Web Server services in this order (right click, stopping service and select).

  2 backup, and then delete all the files under %PROGRAMDATA%\National Instruments\NIAuth: registry.bin and commitmark.

  3. run NI System Web Server and NI Application Web Server services in this order.

  4. navigate to http://localhost:3580 / connection of an IE on the local computer and try to log in with username "admin" and password empty. Succeeds, the server will return one signed in as: message from the admin.

  After you follow these steps, try and connect to the FPGA compiler, and then let me know what are the results.

• Installation NOR Configuration Portable 4.7.0 failed with the following error Internal error 2203

  Dear reader,

  some advice please, I can't find someone else with a similar problem on the Forums or I'm looking in the wrong place.

  I'm having problems with installing an evaluation version of LabView 2010 64-bit on Windows 7 Lenovo ThinkPad laptop. I tried three attempts to install and uninstall and I get different messages each time. I run as administrator and insured that no other software is running, with partial success. I got to the stage where the application looks like it is running, but after a message "installation failed." So I don't know what are the underlying issues there might be if I have to evaluate, I suspect that the installation is corrupted.

  The Update Service indicates that there is an update, but the Service is in a loop where the bar past green to almost 90% and then again about 10%, with a frequency of once every 8 seconds or more. Looking at my traffic on the Internet, I do not see evidence of any updates being downloaded.

  I have attached a few screenshots, I can add a little more if needed / given the chance to. Files to trigger an internal error during installation vary. For example 124f989.ipi with-2147287035; 2aa73f. PIP with-2147287035; and a448f2.ipi.

  I've also seen error 1310 with 1becbcb.msi; etsoutenirles NI Logos XT, installation failure; 2 error: cannot perform action License Manager Updating OS Compatibility.

  At risk of key players away from what could be the cause but for purposes of completeness, note that the laptop power saving has been initially set at 15 minutes before sleeping, then perhaps there were a few download / partial of installation problems.

  Any suggestions regarding the best solution please?

  Thanks, Alex

  I don't know if you have one or two problems here.  But the problem with the update service seemed familiar.

  Take a look at this link.  I would try first, and if you are lucky, perhaps that other issues will disappear as well.

• Python, call DLLs in LabVIEW: Fatal internal error when accessing output String Cluster

  Hello

  We have compiled a DLL in LabVIEW (TestError.dll) and tried to call it from Python.

  TestError.dll includes 2 functions:

  1 testErreur: cluster 1 entry string, 1 channel indicator

  2 TestError2: 1 channel input, 1 bunch of output string

  What we try to do in Python is actually something like this:

  1 provide values to controls in the functions of the DLL.

  2. call the DLL.

  3 get the values of the indicators.

  What we have seen are:

  1 read/write operations on normal data types (string, digital) indicators/controls are OK

  2. write operation on the Cluster string entry is OK

  3. read operation on the Cluster output string is not OK. The following error is still prompted for:

  «Unrecoverable internal error: 'MemoryManager.cpp', line 437.» LabVIEW version 8.6... »

  Also joined the TestError.prj and python code.

  Grateful if someone can help to explain why we get this error and how to overcome?

  Thank you

  howmean

  What we have seen are:

  1 read/write operations on normal data types (string, digital) indicators/controls are OK

  2. write operation on the Cluster string entry is OK

  3. read operation on the Cluster output string is not OK. The following error is still prompted for:

  «Unrecoverable internal error: 'MemoryManager.cpp', line 437.» LabVIEW version 8.6... »

  Also joined the TestError.prj and python code.

  It is very logical that it does not, and the bad news is, it cannot really be implemented reliable of a process not LabVIEW.

  LabVIEW channels (and tables) are very specific species. They are then called handles, which are pointers to a pointer to a block of memory. If you have a control or indicator on its own, the Prototype configuration allows you to configure this setting as a C. LabVIEW data pointer, when creating the DLL, create heels C for each exported function and place the code to do the translation between the past C pointer to and necessary LabVIEW data handle. For strings and arrays within the cluster, there is no configuration option and the DLL is expected to pass a structure with data handles native LabVIEW in there.

  You may say that creating handles data in your calling process enough to trick LabVIEW. For the input variables that actually CAN sometimes work (but is a delicate and dangerous generally to handle this). There is no way to make it work for output variables. LabVIEW will try to resize handle to fill data in that he wants to make. This resizing is done using internal memory manager of LabVIEW. This will work only if it had been allocated by EXACTLY the same instance of the memory manager. Otherwise, it refers to a different memory segment and catastophally fail. The only way to make this work perhaps, with luck, taking your heart and prayer to the gods, is to lvrt.dll to allocate a handle that you must pass to the DLL. Still find the good lvrt.dll, which will execute your DLL LabVIEW is a major challenge.