We get a "invalid number" error when the Xref database of fill

Similar Questions

• -You also get an invalid identifier error when executing this query sql for a data model, but not in TOAD/SQL Developer?

  Hello OTN.

  I don't understand why my sql query will pass by in the data model of the BI Publisher. I created a new data model, chose the data source and type of Standard SQL = SQL. I tried several databases and all the same error in BI Publisher, but the application works well in TOAD / SQL Developer. So, I think it might be something with my case so I'm tender hand to you to try and let me know if you get the same result as me.

  The query is:

  SELECT to_char (to_date ('15-' |)) TO_CHAR(:P_MONTH) | » -'|| (To_char(:P_YEAR), "YYYY-DD-MONTH") - 90, "YYYYMM") as yrmth FROM DUAL

  
  

  Values of the variable:
  

  : P_MONTH = APRIL

  : P_YEAR = 2015

  I tried multiple variations and not had much luck. Here are the other options I've tried:

  WITH DATES AS

  (

  Select TO_NUMBER (decode (: P_MONTH, 'JANUARY', '01',))

  'FEBRUARY', '02',.

  'MARCH', '03'.

  'APRIL', '04'

  'MAY', '05'.

  'JUNE', '06'.

  'JULY', '07',.

  'AUGUST', '08'.

  'SEPTEMBER', '09'.

  'OCTOBER', '10',.

  'NOVEMBER', '11'.

  "DECEMBER", "12."

  '01')) as mth_nbr

  of the double

  )

  SELECT to_char (to_date ('15-' |)) MTH_NBR | » -'|| (TO_CHAR(:P_YEAR), 'DD-MM-YYYY') - 90, "YYYYMM")

  OF DATES

  SELECT to_char (to_date ('15-' |: P_MONTH |)) » -'|| ((: P_YEAR, 'MONTH-DD-YYYY')-90, "YYYYMM") as yrmth FROM DUAL

  I'm running out of ideas and I don't know why it does not work. If anyone has any suggestions or ideas, please let me know. I always mark answers correct and useful in my thread and I appreciate all your help.

  Best regards

  -Konrad

  So I thought to it. It seems that there is a bug/lag between the guest screen that appears when you enter SQL in the data model and parameter values, to at model/value data.

  Here's how I solved my problem.

  I have created a new data model and first created all my settings required in the data model (including the default values without quotes, i.e. APRIL instead "Of APRIL") and then saved.

  Then I stuck my sql query in the data model and when I clicked ok, I entered my string values in the message box with single quotes (i.e. "in APRIL' instead of APRIL)

  After entering the values of string with single quotes in the dialog box, I was able to retrieve the columns in the data model and save.

  In the data tab, is no longer, I had to enter the values in single quotes, but entered values normally instead, and the code worked.

  It seems the box prompted to bind the values of the variables when the SQL text in a data model expects strings to be wrapped in single quotes, but no where else. It's a big headache for me, but I'm glad that I solved it, and I hope this can be of help to other institutions.

  See you soon.

• How can I configure drive extender? get an error when the computer shuts down say reinstall Extender player

  get an error when the computer shuts down say reinstall Extender player. ? What is it. Thank you

  Hi deener49,

  Please look at the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/IE/Forum/ie7_6-windows_other/please-reinstall-Extender-Player-invalid-or/86692b09-9464-E011-8dfc-68b599b31bf5

• Why do I get an unknown error when the AI document opening in Illustrator 5.5?

  Why do I get an unknown error when the AI document opening in Illustrator 5.5.? How open/fix documents?

  Did this happen after update to Yosemite? Sorry, but this could be a number of things and not only have a response

  • disable the automatic plugin font activator which is delivered with the police officer, you activate a corrupt police.
  • Clean your cache of police download nuke font it's free
  • reset your prefs AI
  • Delete your printer driver in the system preferences and recreate - Yes, there is a possibility that this can cause this
  • hold off on the update to El Captan for now, even if an update of the system has a chance to eliminate the problem, you're on CS5.5

• Access to the Internet and get a "atl100.dll" error when you try to use Firefox

  I just reinstalled Vista Home Premium and everything was going well for two days, but I can not access the internet regardless of the browser that I use and when I open Firefox, I got an error of "atl100.dll", I am afraid that my files cd, especially the .dll files can be altered, where can I find a good (and costs nothing) copy of the file atl100.dll? Please help as soon as possible. Thank you!!

  Original title: Re-installed Vista Home Premium and cannot access the internet & get a "atl100.dll" error when trying to use Firefox and IE just is not access to the internet either

  Hello

  1 did you changes to the computer before the show?

  2. What is the full error message?

  3. who is the antivirus installed on the computer program?

  4 are you using wired or Wi - Fi to access the Internet?

  5. What is the version of Internet Explorer installed on the computer?

  The possible causes:

  • ATL100.dll file is missing, as it was accidentally deleted from your computer
  • ATL100.dll file is damaged by viruses and your computer cannot access the file.
  • ATL100.dll associated with registry files is corrupt and obsolete.

  Perform the steps:

  Method 1: Perform a SFC scan on your computer to fix the corrupt dll files.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Run a scan antivirus on your computer.

  www.Microsoft.com/Security/Scanner

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  Method 2: Reset of internet explore and check. (If you use Internet Explorer)

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  For more information, see the links:

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I hope this helps.

• Please help: instruction box - ORA-01722: invalid number error

  Hi all
  I am trying to use the Case statement to recode the status canceled in two groups
  "Reject" If the difference between the date of the first and the last date is less than 29 and
  'Accept' if the difference between the date of the first and the last date is greater than 30
  
  Here's my data 'test'
  
  STATUS FIRST_DATE LAST_DATE
  
  Transfer / / 10/08/2011-10/09/2011
  Mover 10/08/2011-15/09/2011
  Cancel the 16/09/2011 10/08/2011
  Cancel the 10/08/2011 5/09/2011
  
  Here's the syntax
  
  Select a.*,
  (CASE WHEN a.STATUS = 'Cancel' CAN (round(a.LAST_DATE-a.FIRST_DATE))
  0 OTHERWISE
  END CAN_DAYS),
  (BOX WHEN "CAN_DAYS" > 29 THEN "reject"
  WHEN "CAN_DAYS" < 30 THEN "accept."
  Reject_Accept END)
  try one
  
  The first CASE statement works very well and gives me this
  STATUS FIRST_DATE LAST_DATE CAN_DAYS
  
  Transfer 0 10/08/2011-10/09/2011
  Mover 0 10/08/2011-15/09/2011
  Cancel the 37 16/09/2011 10/08/2011
  Cancel the 26/10/08/2011 5/09/2011
  
  but the LATTER product ORA-01722: invalid number error. It's something to do with the type of data CAN_DAYS, Oracle does not see in the Numeric form I think.
  I want to see result
  STATUS FIRST_DATE LAST_DATE CAN_DAYS Reject_Accept
  
  Transfer 0 10/08/2011-10/09/2011
  Mover 0 10/08/2011-15/09/2011
  Accept to cancel 37 10/08/2011-16/09/2011
  Refuse to cancel the 26/10/08/2011 5/09/2011
  
  Could someone please help me fix the syntax?
  Thank you in advance,

  Hello

  The error is due to the fact that you are trying to compare "CAN_DAYS", which cannot be regarded as a number, a number.
  You can try this option for your results:

  select A.STATUS, A.FIRST_DATE, A.LAST_DATE,case
                                              when a.status ='Cancel' then round(a.last_date - a.first_date)
                                              else 0
                                              end as can_days,
                                              case
                                              when (a.status ='Cancel'  and round(a.last_date - a.first_date) > 29) then 'Reject'
                                              when (a.status ='Cancel'  and round(a.last_date - a.first_date)< 30) then 'Accept'
                                              else null
                                              end as Accept_Reject
  from test a 
  

• Get a zip code error when your book order

  Getting a zip code error when your book order is exact zip code th for my address.

  In the Canada.

  Help

  You order the Canadian Apple store online? If this isn't the case, then you must change your store site online on the Canadian site. Scroll down to the bottom of the page where you should find an icon of circled on the right corner flag. Click it, and then select the Canadian store in the list and re - buy article. It must now accept Canadian postal codes rather than postcodes American.

• I can't uninstall nero programes from my computer it install to properly dose not work and I get a critical system error when I try to burn lightscribe cover__

  I can't uninstall nero programes from my computer it install to properly dose not work and I get a critical system error when I try to burn the lightscribe cover

  http://www.Nero.com/enu/tools-utilities.html

  Uninstalling a Nero product did not work properly?
  Use Nero General CleanTool to delete all remaining Nero entries from your system.

  Read the above info.

  See you soon.

  Mick Murphy - Microsoft partner

• Why I get an ORA-04052 error when I try to compile a procedure?

  Hello
  The following procedure I get an ORA-04052 error when I try to compile the following procedure.
  

  CREATE OR REPLACE PROCEDURE APPS.Find_String (
   pin_referenced_name IN dba_dependencies.referenced_name%TYPE) 
  
  IS
  
  cursor cur_get_dependancy
  is
  SELECT distinct owner, name, type 
    FROM [email protected]        -- prod.world 
   WHERE lower(referenced_name) = lower(pin_referenced_name) --'ftbv_salesrep_all_1d' 
     AND referenced_type <> 'SYNONYM'
     AND owner <> 'SYS'
   order by name;
   
  v_owner  varchar2(40);
  v_name   varchar2(50);
  v_type   varchar2(40);
   
   
      BEGIN
  
         dbms_output.put_line(upper(pin_referenced_name)||' is found in the following objects.');
         dbms_output.put_line(' ');
         dbms_output.put_line(RPAD('OWNER', 30, ' ')||RPAD('NAME', 60, ' ')||RPAD('OBJECT TYPE', 30, ' '));
         dbms_output.put_line('-------------------------------------------------------------------------------------------------------------------');
  
          FOR i IN cur_get_dependancy
          LOOP
              v_owner := RPAD(i.owner, 30, ' ');
              v_name  := RPAD(i.name, 45, ' ');
              v_type  := RPAD(i.type, 30, ' ');
              
             
              dbms_output.put_line(v_owner ||v_name|| v_type);
  
          END LOOP;
  
  END find_string;

  I use the [email protected] link. Commented compiles it procedure for other links of database used in the cursor, including the one to the right of the code 'prod.world '.
  
  What is even more strange is that I took the SELECT statement
  

  SELECT distinct owner, name, type 
    FROM [email protected]        -- prod.world 
   WHERE lower(referenced_name) = lower(pin_referenced_name) --'ftbv_salesrep_all_1d' 
     AND referenced_type <> 'SYNONYM'
     AND owner <> 'SYS'
   order by name;

  the procedure and he ran on the command line by using the link to @pinp.world, the SQL statement is fine. But when I tried to compile the procedure above to this exact same SQL query with the same exact link I get the following string of errors.
  

  ORA-04052: error occurred when looking up remote object [email protected]
  ORA-00604: error occurred at recursive SQL level 1
  ORA-02068: following severe error from PINP
  ORA-03113: end-of-file on communication channel

  How the link can work very well in a regular SQL but then cause an error when its code compiled in that otherwise compile correctly when you use any link, or even just a simple database. Does anyone have any suggestions?

  Hello

  Good thounght, but no, there is no privilege SELECT ANY VIEW; SELECT ANY TABLE includes views and materilaized.

  I suspect that the problem is something specific to the data dictionary. I have just connected as SYS and granted SELECT ANY TABLE to another user with minimum privileges, X. X, ALL_VIEWS included so all views dba_, including the dba_dependencies. However, X was still unable to dba_dependencies the query either in SQL * more or PL/SQL.

• I'm in photoshop and I'm trying to adjust the pressure of my pen. However, I get this sign of error with the sign of exclamation on the side and the pressure is not resolved.

  I'm in photoshop and I'm trying to adjust the pressure of my pen. However, I get this sign of error with the sign of exclamation on the side and the pressure is not resolved.

  
  

  I'm running on Windows 8, I'm using the latest version of Photoshop (2015) and I have a Wacom Intuos tablet. What should I do?
  

  Thanks, I forgot actually download wacom itself. It works now. Thank you!

• How can I get audio to not start when the button is clicked?

  I am new to adding audio to slides, buttons, click boxes.  Import the recorded voice on the overall slide of files sounds easy enough.  However, there are several buttons that display a legend I want audio to not start when the button is clicked.  I added audio just for this button, but it starts when the slide begins.

  How can I get audio to not start when the button is clicked?

  Hello

  Audio playback when the assigned object with the audio appears. That's why hear you when the button appears.

  Try to assign audio instead to the object that is displayed when you click the button. Perhaps the legend.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• I get an "invalid pointer" error message when I try to capture video from my sony camera?

  I use a Sony DCR-TRV250, Windows XP Pro with SP3. When I try to capture video I get the error message "invalid pointer". Then after clicking OK I get, ' the unusable device at this time because there was an error when starting the device.» The video capture device window is open behind this error message.

  Everything works fine on other computers, so I think I am missing a file any.  Is there a way to update or reinstall Movie Maker?

  Hi LonJett,

  ·         Have you checked if there is any software updated the same?

  Log on to the Sony website and download the latest version of the software for the camera. Uninstall the existing software\driver and install the last downloaded software\driver and check for the issue.

• with the master page "insert current page number" error when you export the book

  Using InDesign CS for Windows 5.5

  Recently updated for InDesign CS (very old one from 2003). I save a copy of all my old files version and kept the old installed ID just in case (after reading all the horror stories on here).

  In my old version of ID, I created a book consisting of some 70 documents. Some of these documents are a single page, while others have multiple pages. In the multiple documents page, I used the "insert... current page number" character (or whatever the command was in the old version) on a page master and formatted as follows, for example: Page 1 of 17, Page 2 of 17, Page 3 of 17, etc. When I exported my book in pdf format, it worked fine. (I is not have to / want page numbers consecutive throughout the book, only in individual documents.) By that I mean my whole book is about 280 pages, but not all of these 280 pages are numbered, only groups of pages in multi-page documents. It is not read page 1-280).

  Am my upgrade to 5.5 a few months ago added some documents in the book, and (if I remember correctly) when I saved the book he asked to convert each document version to the new version, I said OK. When I exported the book in pdf format, some documents that are more than 2 pages are now counted wrong; the numbers are now like this: Page 1 of 17, Page 2 of 17, Page 2 of 17 (supposed to be page 3), Page 2 of 17 (supposed to be page 4), etc. Each page, but page 1 is now page 2 of that either.

  If I open the individual document and export it to PDF, the page numbers work very well. It is only when the document is exported with the book the page numbers to spoil. And it's not all documents in my book; This error starts to a particular document and continues from there throughout the rest of the book, affecting any document more than 2 pages. Documents several pages before that point in the book for export with the correct page numbers.

  I create new documents by performing a "save under" with a previously created document and cut and paste as needed, so I won't have to reformat or implement the page numbers on each new document. I use layers or styles (I do not know there is a better way to do what I need, but I didn't have time to learn the basics, just enough to be functional.)

  My attempts to resolve this problem so far (using version 5.5), tests with the first document where the error: (1) I have removed the document from the book, removed the page number character current insert, back to the current page number character insert, saved, the individual document exported in pdf format and it worked fine. Put it in the book, save, export, and it is bad. (2) I picked up the book document, export the document to .idml, registered as a new .indd new name, exported to PDF and it worked fine. Put it in the book, save, export, and it is bad. (3) I started to the top of my old version of ID, open from the previous version of this document, exported .inx, closed, open the .inx in ID 5.5, registered as a new .indd new name, exported to PDF and it worked fine. Put it in the book, save, export, and it is bad. (4) I moved the document to the top in the order book, put it on a document which correctly numbered pages, saved, exported to PDF and this document was still evil, but one who has been numbered correctly all along is still correct. (5) I compared the settings for this document to others that the number properly and found no difference.

  It's as if the page numbers get hooked on "2" when I export the book, but only in the last two-thirds of the book. Sorry this is so long, but I hope that this description of my problem is understandable. Any advice, other than to go back to my old version documents and start over?

  Thank you for your time and all the information great this forum provides.

  Alice

  Normally, I would say that this kind of problem is symptomatic of the incorrect numbering options in the book panel or an individual document or a bad update of the numbering, and those things are still definitely worth looking at.

  That said, I invite you to go to the original files, export each one to .inx and open those in CS5.5 and save as a new file .indd CS5.5 whose new name, then add them to a whole new book CS5.5. Books are pretty flakey without mixture in the conversion of files, and there are enough bad behvior file conversion directly inherited the .inx route is insurance a little success.

• Get the error when the remote procedure call

  When I try to call the child remote database procedure, I am getting error below:

  ORA-02064: operation divided not supported
  ORA-06512: at "NMUSER. NEW_CUST_UPLOAD', line 740

  
  

  (P.S. on line no 740 I published "commit" ;))
  

  
  

  I checked rights, synonymous with on all the objects they are very good.

  Santosh Pradhan wrote:

  ...

  (P.S. on line no 740 I published "commit" ;))

  Do validation on the remote database. Do it on the local database. If you have a distributed transaction, then this local validation, will invest also the remote data.

  See also: http://docs.oracle.com/database/121/ADMIN/ds_concepts.htm#ADMIN12118

• SQL * Loader invalid number error

  I'm trying to load a .csv using SQL * Loader and all ranks is rejected with an error invalid number.
  
  Here is the control file:
  
  OPTIONS (SKIP = 1)
  DOWNLOAD THE DATA
  INFILE 'shi_claims.csv '.
  REPLACE IN THE TABLE SHI_CLAIMS
  FIELDS ENDED BY ',' POSSIBLY FRAMED BY "" "
  TRAILING NULLCOLS
  (
  ID TANK
  DECIMAL EXTERNAL AMT
  )
  
  Here are the first lines of data in the .csv (note I am ignoring the first line):
  
  EmployeeID, PaidAmnt
  100550393,0
  100709611,120.04
  100795648,90
  100795648,5.24
  
  Here is the structure of the table, I'm trying to load:
  
  CREATE THE TABLE UST_GLOBAL. SHI_CLAIMS
  (
  ID VARCHAR2 (9 CHAR),
  AMT NUMBER (8.2)
  )
  
  Here's the .log file that results. All ranks lands in the .bad file.
  
  SQL * Loader: Release 10.2.0.4.0 - Production on Mon Mar 7 16:34:09 2011
  
  Copyright (c) 1982, 2007, Oracle. All rights reserved.
  
  Control file: /u02/sct/ust/shi_claims.ctl
  Data file:././data.7609732
  Bad leadership: 7609732.bad
  Delete the file: discard.7609732
  (Allow all releases)
  
  Number of loading: ALL
  Number of jump: 1
  Authorized errors: 50
  Link table: 64 lines, maximum of 256000 bytes
  Continuation of the debate: none is specified
  Path used: classics
  
  Table SHI_CLAIMS, loaded from every logical record.
  Insert the option in effect for this table: REPLACE TRAILING NULLCOLS option in effect
  
  Column Position Len term Encl. Datatype name
  ------------------------------ ---------- ----- ---- ---- ---------------------
  FIRST ID *, O ("") CHARACTER
  AMT NEXT *, O ("") CHARACTER
  
  Sheet 1: Rejected - error on the SHI_CLAIMS, AMT column table.
  ORA-01722: invalid number
  
  Sheet 2: Rejected - error on the SHI_CLAIMS, AMT column table.
  ORA-01722: invalid number
  
  (.. .and so forth for all ranks).
  
  I note that in the copy of the control file that is displayed in the .log file, the column AMT appears as a CHARACTER, while my control file means DECIMAL EXTERNAL. Could why, and this be part of the problem?
  
  Thanks for any help...
  
  Published by: wrfoster on March 8, 2011 09:40

  wrfoster wrote:
  Ideas on how to get rid of them?

  Well, ideally, if you can get rid of them when creating csv... If not do the AMT DUMP as I suggested previously to get the exact or the end characters ascii codes. Assuming that it is the new line of Chr (10) put the following text in the loader control file:

  AMT "RTRIM (:AMT,CHR(10)).

  SY.