Web Access Weblogic administration console

Similar Questions

• Very slow WebLogic administration console in a strange behavior

  Hi, I am facing a problem where the weblogic administration console becomes very slow, here is the scenario:

  * I have 3 servers managed in my environment, 1 server is a loadbalancer using servlet cluster weblogic, 2 other servers are in a cluster where

  1 server is in the same physical machine as the server administrator and the other on another Machine

  so now THAT if I stop the 2nd managed server is on another machine, the administration console becomes very slow, it takes like 30 seconds to load any section.

  I use the Weblogic Server 10.3.6 & ADF 11.1.2.4.0

  
  

  Help, please.

  Hello

  Administration console WebLogic Server 10.3.6 becomes slow when a managed server is disconnected from the network, because the ServerLifeCycleRuntime does not wait times.

  It is recorded in the published 14295772 vice - WEBLOGIC 10.3.6 SLOW CONSOLE - SERVERLIFECYCLERUNTIME no IS NOT TAKING THE WAIT times

  Please, ask for the patch number 14295772, so that the administration console does not slow down for answer in case one of the host machines is achieved.

  Then, you must set the following parameters:

  (1) in mydomain > Configuration > General > Advanced page

  Invocation seconds Timeout: 2

  (2) in the administration Console, on the preferences page > shared Preferences (Tab)

  Timeout operation management: 5

  Thank you

  Sharmela

• Cannot access the administration console.

  Just got the invitation to administer the team, however, when trying to access the administration console, I get the redirect to personal assets and unable to show any console team.

  Please ask the administrator of the team of remove you the license and then assign you again of the administration console.

  Then the new email you, try to accept the license there.

• How to configure ESS to the multiple proxy weblogic administration console

  Hello

  We use a 11.1.1.7 OSH and OAM webgate 11g and 11.1.2.

  To bring two weblogic server admin console in Kingdom of Single Sign-on.

  
  Please let us know how to configure ESS to the multiple proxy console weblogic.

  Thank you

  Stern John

  Activate the configuration of the virtual server on OSH and assign each administration console to another virtual server.

• WebLogic administration console in case of failure during the recording of the Commons is used.

  I have an application that requires the commons logging.
  I followed the instructions according to the literature and other entries forum for example How to use log4j in weblogic 10.3 to add the common logging jar of apache and the specified weblogic jar. As well, I put the system to the LogFactory property.
  When I start the application server I see messages as expected from my application. But when I start the weblogic I receive and exception management console and the console does not start. I even tried to put the pots in my application instead of the Directory domain/lib to try to iscolate the issue, but still had problems with the start-up of the Console.
  Any ideas on why this happens?
  
  See the below error:
  
  
  # < 19 May 2010 22:16:04 CEST > < opinion > < Stdout > < TE001XU CATOR1 > < AdminServer > < check the calendar setting retention > < < WLS Kernel > > <><>< 1274300164672 > < BEA-000000 > < - retention Init() - >
  # < 19 May 2010 22:16:04 CEST > < opinion > < Stdout > < TE001XU CATOR1 > < AdminServer > < check the calendar setting retention > < < WLS Kernel > > <><>< 1274300164672 > < BEA-000000 > < Thu May 20 05:00:00 EDT 2010 >
  # < 19 May 2010 22:16:06 CEST > < health > < > < TE001XU CATOR1 > < AdminServer > < weblogic. GCMonitor > < < < > anonymous > > <>< 1274300166060 > < BEA-310002 > < 81% of the total server memory is free >
  # < 19 May 2010 22:35:03 CEST > < Info > < WorkManager > < TE001XU CATOR1 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1274301303146 > < BEA-002901 > < WorkManager creation "consoleWorkManager" to "null" and 'consoleapp' request module >
  # < 19 May 2010 22:35:17 CEST > < error > < HTTP > < TE001XU CATOR1 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1274301317582 > < BEA-101216 > < Servlet: 'AppManagerServlet' failed by preloading at startup in a Web application: "console".
  java.lang.ExceptionInInitializerError
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName(Class.java:247)
  at weblogic.servlet.AsyncInitServlet.createDelegate(AsyncInitServlet.java:44)
  at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:98)
  at weblogic.servlet.AsyncInitServlet.init(AsyncInitServlet.java:78)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:283)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
  at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
  at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
  to weblogic.servlet.internal.StubLifecycleHelper. < init > (StubLifecycleHelper.java:48)
  at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:531)
  at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1915)
  at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1889)
  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1807)
  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3045)
  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1397)
  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:460)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:1267)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:54)
  to weblogic.application.internal.BackgroundDeploymentService$ 2.next(BackgroundDeploymentService.java:373)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
  to weblogic.application.internal.BackgroundDeploymentService$ BackgroundDeployAction.run (BackgroundDeploymentService.java:277)
  to weblogic.application.internal.BackgroundDeploymentService$ OnDemandBackgroundDeployAction.run (BackgroundDeploymentService.java:336)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:516)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  
  Caused by: org.apache.commons.logging.LogConfigurationException: the chosen LogFactory implementation does not extend to the LogFactory. Please check your configuration. (Caused by java.lang.ClassCastException: weblogic.logging.commons.LogFactoryImpl cannot be cast to org.apache.commons.logging.LogFactory)
  to org.apache.commons.logging.LogFactory$ 2.run(LogFactory.java:574)
  at java.security.AccessController.doPrivileged (Native Method)
  at org.apache.commons.logging.LogFactory.newFactory(LogFactory.java:517)
  at org.apache.commons.logging.LogFactory.getFactory(LogFactory.java:254)
  at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:351)
  to com.bea.console.utils.MBeanUtilsInitSingleFileServlet. < clinit > (MBeanUtilsInitSingleFileServlet.java:23)
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName(Class.java:247)
  at weblogic.servlet.AsyncInitServlet.createDelegate(AsyncInitServlet.java:44)
  at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:98)
  at weblogic.servlet.AsyncInitServlet.init(AsyncInitServlet.java:78)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:283)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
  at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
  at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
  to weblogic.servlet.internal.StubLifecycleHelper. < init > (StubLifecycleHelper.java:48)
  at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:531)
  at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1915)
  at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1889)
  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1807)
  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3045)
  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1397)
  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:460)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:1267)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:54)
  to weblogic.application.internal.BackgroundDeploymentService$ 2.next(BackgroundDeploymentService.java:373)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
  to weblogic.application.internal.BackgroundDeploymentService$ BackgroundDeployAction.run (BackgroundDeploymentService.java:277)
  to weblogic.application.internal.BackgroundDeploymentService$ OnDemandBackgroundDeployAction.run (BackgroundDeploymentService.java:336)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:516)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

  I fall into the same problem recently
  Initially, I follow the instructions and got the same error.
  But finally, it turned out that set org.apache.commons.logging.LogFactory is not necessary.
  My solution is to put 4 jars in the lib of the domain directory.

  1.wlcommons - logging.jar
  2.Commons - Logging - 1.0.4.jar
  3.wllog4j.jar
  4.log4j_1.2.13.jar

  Then current newspaper works and so as the weblogic console.

  Another solution I tried is:

  Follow the instruction of weblogic, but separate admin servers and managed in two (startAdmin.sh and startManaged.sh) startup script.

  Avoid putting org.apache.commons.logging.LogFactory on server (startAdmin.sh) admin then weblogic console works without problem.

  Your application should go into the managed server, add the startManaged.sh org.apache.commons.logging.LogFactory then common newspaper works.

  Best regards
  James

• can not enter Weblogic administration console

  Hello
  I installed the server, weblogic 11g on a win 2003 server. I created a domain. In the console of the server of projects/mydomaine/admin start/program/weblogic/user. An IE window opens and ask for a username/password. But I don't remember what I gave when instlled.
  What are the default values?
  How can I give a new?
  Thank you.

  You can try

  Username: weblogic
  Password: weblogic1          or          BIENVENUE1

  But we cannot by default say... for the newly created areas. Just give it a try.

• Cannot access serives web browser administration console

  Hello
  IAM trying to connect to the web browser essbase administration console.
  "" http://servername: 10080/easconsole/console.html. ""
  
  
  When I click it showing just locate language and when I select language and start nothing happens...
  
  
  no idea...
  
  Thank you and best regards,
  Sri-Oracle.

  A Java web start window should appear after clicking on "launch." Make sure you have a Java installed on your client machine - runtime and it should be available to the user that you are using.

  Kind regards
  Chrystelle

  PS: Java will not be available if the admin connects via another account and install java. Java must be installed using the same user account. If admin access is not available, a temporary is needed

• Access to the Console of Administration Mapviewer 12 c problem

  I try to install and configure Oracle Mapviewer 12 c (v12.1.3).  The installation seemed successful, but after the installation, I am unable to access the Console of Administration Mapviewer 12 c.  The default is Admin Console URL http://[host]:[port]/mapviewer.  I can reach the URL using a browser (Firefox, Chrome, IE), but the admin home page will not appear.  The browser just "turns its wheels"as it tries to load the page. " The image below is from Firefox

  Looking at the console of the developer of the browser (press F12) while the page loads, you can see browse the page of connection repeatedly (see image below).

  

  My environment consists of the following:

  (1) server OS: Linux (RedHat Enterprise 5.11) x86_64

  (2) oracle Weblogic Server 12 c - distribution "Oracle Fusion Middleware Infrastructure"

  According to the documentation, Oracle Mapviewer 12 c requires specific dependencies that will not provide generic install Weblogic Server (i.e. , http://www.oracle.com/technetwork/middleware/weblogic/overview/index.html,).  Instead, you must use the "Oracle Fusion Middleware Infrastructure" distribution, installation of weblogic server and all the dependencies required.

  The distribution of Oracle Fusion Middleware Infrastructure has been downloaded from the Oracle ADF OTN download page or leave cloud of delivery of the Oracle software.

  -Oracle ADF OTN download page: http://www.Oracle.com/technetwork/developer-tools/ADF/downloads/index.html

  -JAR file fmw_12.1.3.0.0_infrastructure_Disk1_1of1.zip

  (3) oracle Fusion Middleware MapViewer Version 12 c (12.1.3)

  -downloaded from http://www.Oracle.com/technetwork/middleware/MapViewer/downloads/index.html

  -JAR file is fmw_12.1.3.0.0_mapviewer.jar

  Following the instructions in the for Oracle Mapviewer 12 c E29624-02 User Guide (http://docs.oracle.com/middleware/1213/core/JIMPV/index.html), first of all, I have installed and configured Weblogic Server 12 c, in Mapviewer 12 c followed.

  I made two attempts of different installation:

  (a) I installed Mapviewer using the Universal Installer

  (b) I have manually deployed an EAR MapViewer exploded in WebLogic Server folder

  Two attempts produced the same results.

  Specifically, after installation and configuration of Mapviewer, I could check the Mapviewer version using the URL:

  http://[host]:[port]/MapViewer/omserver?getv=t

  Immediately access this URL resulted in the expected answer text string:

  Ver12.1.3_B140430.1010

  I could also successfully access the Weblogic administration Console (http://[host]:[port]/console) and confirm the Weblogic is running, and that Mapviewer was correctly deployment up and running as well.

  However, at this point, if I try to access the Console of Administration Mapviewer 12 c via http://[host]:[port]/MapViewer , the Console launch page does not appear (as described above).

  at this point, I wonder why the Oracle demo site works (http://slc02okf.oracle.com) and me does not work.  I assumed that the demonstration site for the Oracle Mapviewer used Mapviewer 12 c.  I based this assumption on the fact of demonstration site for this Orqacle (http://slc02okf.oracle.com/mvdemo/demo/oracle_maps_demo_v2.jsp) displays a header SEO Mapviewer 12 c (see image below).

  

  However, when I questioned the version of Oracle Demo site URL (i.e. ) http://slc02okf.Oracle.com/MapViewer/omserver?getv=t ), I see that they run Mapviewer 11 g!

  Ver11_1_1_7_3_B140717

  So, long story short, deployed anyone successfully Mapviewer 12 c and if so, can you access the Console of Administration Mapviewer 12 c?

  Any contribution is greatly appreciated.

  Wayne

  Hi Wayne,

  Please check that Java is used to start the WebLogic Server. If the JDK 8, try starting with JDK 7 to see if the spin connection problem is resolved.

  Thank you.

  João

• Prevent users without access to authorization WCP Administration Console

  Hi all
  I've created a normal user A not great, but no permissions for this user. I have A WCP Adminstration Console user connection and the result I always access WCP Administration Console. And I can see the page of resources and Services page.
  And I discovered big problem here with the user I can change the position of all the page in the page 'management of Pages '. This action may take effect immediately and show it on site. In detail the position of link to pages in the main menu of the portal will change.
  
  Did you prevent a user from authenticating, without permission of the WCP Adminstration Console administration access?
  Do you have any idea about this?
  
  Thank you very much!

  Simply apply the Security Admin page directly in jazn-"Data.xml".

  Remove authenticated role and only assign this page to the Administrator role.

  To see the applied to the admin page security follow these steps:
  (1) go to the jazn-"Data.xml"
  (2) in resource Type, select Web Page
  (3) check "Show Web Pages imported from libraries of the ADF
  (4) select "view resources with subsidies."
  (5) see you admin page, remove authenticated and add the role of administrator.

  Kind regards.

• Administration console WebLogic and Enterprise Manager 11 g show different things

  Administration console WebLogic and Enterprise Manager 11 g show different things:
  
  In the administration Console soa_server1 WebLogic is running
  
  In Enterprise Manager 11g soa_server1 broke DOWN.
  
  Of course things:
  (1) I started the WebLogic administration Console soa_server1
  (2) when I try to deploy a project the soa_server1 is not considered as available.
  
  I use 11.1.1.2.0 Weblogic and JDeveloper 11.1.1.3.0
  
  
  Any ideas?
  
  Thank you
  PTC

  Hello

  Start Server soa with the startManagedWebLogic command promt.

  From the console is a failure manytimes.

  Kind regards
  Dhanumjay.S

• Cannot start OIM_server and SOA_server of the weblogic administration server

  Hello

  I'm stuck with very critical issue, where in I am not able to start the IOM and soa from the weblogic administration console servers. Attach screenshots. Can someone help me to find the problem and fix it. I want to start this servers to the configuration of the Identity Manager Oracle (from the configuration wizard).

  Let me know if I need to check all logs and submit them.

  Any help is appreciated.

  

  

  

  Thanks in advance

  The order should be as follows:

  1 DB, WLS, UCR...

  2. the patches.

  3. create the field. Access to db sources should be tested during this phase (Test JDBC schema component in the wizard window).

  4. secure database store. In your case:

  %MW_HOME%\oracle_common\common\bin\wlst.cmd %MW_HOME%\IDM1\common\tools\configureSecurityStore.py %MW_HOME%\user_projects\domains\oim_dom - IAM Pei m c d create

  Environment variable MW_HOME must be set in the command window or in:

  System - Advanced Properties - Environmental Variables - Variables system - new - name of the Variable: MW_HOME, the Variable value:

  To check:

  Start the new command window (old could be closed)

  Type set | find "MW_HOME".

  MW_HOME = C:\Oracle\Middleware

  5 post stor:

  %MW_HOME%\oracle_common\common\bin\wlst.cmd %MW_HOME%\IDM1\common\tools\configureSecurityStore.py d %MW_HOME%\user_projects\domains\oim_dom m post

  ...

  Info: Validate the operation completed successfully.

  6. start the administration server.

  7. start the server of the SOA.

  8. set the IAM.

  CD %MW_HOME%\IDM1\bin

  config.cmd

  9 configure nodemanager.

  10 departure you servers managed.

  11 create \security\boot.properties file on each server and set the user name and password.

• How to change password Weblogic Admin console

  Hi friends,
  I change weblogic console admin password for the console goes to security realms-> myrealm-> user-> weblogic and then the new password password. I am able to connect through new admin password.
  
  I have two servers managed running on the weblogic in the same field. What I have to change somewhere else also after above change of password. I mean if I need to restart the managed server. It starts normally or it give any error.
  As I did in the Production environment. So I can't restart Server Admin. Please provide the whole procedure of change of password using the Weblogic administration console.

  Once you change the password for the console, we should also need update the boot.properties file in the security file

  *\domains\\servers\AdminServer\security\boot.properties*

  Once you change the password for the administrator of the server, it will be the effect of the password for the managed server also.

  So to reset for managed servers and if possible create for managed boot.properties is also used.

  Even if it does not, copy the * 'data' * folder slot *\domains\\servers\AdminServer\* to the management servers directory accordingly *\domains\\servers\<>

  This should solve the problem.

  I hope this helps.

  JEETS.

• Change password for administration Console

  How can I change the password to 10.3.0.0 weblogic administration console?
  
  Published by: raviiyer.r on March 9, 2012 02:17
  
  Published by: raviiyer.r on March 9, 2012 02:24

  I guess only with the help of the
  Home > summary of the servers > summary of the security areas > myrealm > Users and Groups > weblogic > passwords

  in the weblogic console is not an option for you...

• Tuxedo Admin Console for Web access

  Hello
  
  Could someone please tell me how access us the Tuxedo administration Console through a Web browser?
  
  Thank you
  ERP toddler

  I have never used - I use the line utility sommand instead (via the psadmin), but here a nice blog entry: http://psadmin.blogspot.com/2007/03/tuxedo-administrative-console-web-gui.html

  Nicolas.

• access to the weblogic Server console problem

  Hi all

  We have a problem of access to the weblogic Server console page.

  We have fresh installed the Enterprise Manager Cloud control 12 c and we can access the MS pages without problems.

  When trying to connect to the weblogic Server (https:// < our_server >: 7101/console) with Firefox, IE11 or if the page is loading and loading without showing the login page.

  But when trying to connect to this address with a place (elinks) browser on the unix machine we'll see the first page immediately.

  Any ideas?

  Thank you

  Michael

  Hi all

  We solved the problem in another way: we opened the ports http access.

  Because issues were security settings in Internet Explorer.

  Thank you

  Michael