Prevent users without access to authorization WCP Administration Console

Similar Questions

• How to connect to another user without password account, with the administrator account in Vista?

  My son will connect to FB, then goes to bed and does not sign off the coast. I log in and the machine is really slow. I am administrator in Windows Vista. Can I disconnect it without password?

  
  * original title - how I as an administrator can connect my son, another user of my computer. I can get her password, but is it a switch, so I can just cut him so my machine is not so slow? *

  Hello

  Unfortunately, we are unable to disconnect another user without password account.

  However, you can restart the computer that would disconnect the other accounts.

• How to prevent users to access network of comments?

  Hello everyone,

  I have a business network (users are using NAM, User and Pass of AD and chaining EAP) and a network of comments (authentication Web portal, local database ISE).

  I don't want my corporate users to access the network of comments (to assume she got a user and pass for this). How I do that?

  I know that it is possible to block connections on NAM, but I would like to know if we can control it at the ISE, and not on the client.

  Thank you.

  Unfortunately no, unless you have an identity store that contains the machine of the company mac addresses, you cannot differentiate between comments and pc peripheral companies. Your users don't take their machines outside the corporate network normally?

• Cannot access serives web browser administration console

  Hello
  IAM trying to connect to the web browser essbase administration console.
  "" http://servername: 10080/easconsole/console.html. ""
  
  
  When I click it showing just locate language and when I select language and start nothing happens...
  
  
  no idea...
  
  Thank you and best regards,
  Sri-Oracle.

  A Java web start window should appear after clicking on "launch." Make sure you have a Java installed on your client machine - runtime and it should be available to the user that you are using.

  Kind regards
  Chrystelle

  PS: Java will not be available if the admin connects via another account and install java. Java must be installed using the same user account. If admin access is not available, a temporary is needed

• How can I prevent users from access to my hard drive from backup to the enclosed address?

  I have a HD attached used only for backup. When I change the guest user attached the HD content is accessible. I tried to change the permissions for the disk 'all', using the information, 'no access' window (without blocking) that seemed to make the case, but a quick search gave terrible warnings about changing permissions, so I came back to the unsatisfactory "read only". Change return 'each' to 'No access' would be a bad move.  If so what can restrict the guest access to the HD (besides of course the disconnection of the latter!) attached.

  You can encrypt the back upward, then it will be password protected.

  http://osxdaily.com/2012/09/17/how-to-encrypt-an-external-drive-quickly-in-Mac-o s-x.

• Cannot delete the folder (access denied / authorization to administrator)

  Recently, after a good 6 months to give a fair chance to Windows 8, I decided to reinstall Windows 7 on my laptop. Installation went very well, no problems (it's the original operating system on this machine). When I installed 7 I didn't format my drive, and so all my files/directories have been moved to the Windows.old folder. I had already backed up everything so I tried to delete the record and was invited to give permission to the administrator. I clicked through and received the error message: you need permission from TrustedInstaller to make changes to this file.

  I know that this problem is everywhere, but before dismiss you this as a pointless post, that's what I tried (unsuccessfully) solve this problem:
  > Delete manually CMD with elevated privileges (no results, "access denied" after each item has been deleted in vain)
  > Turn off UAC (no change)
  > Delete using Shift + Delete to bypass the Recycle Bin
  > Add a DWORD value in the registry (UseSystemForSystemFolders)
  > Start in safe mode with CMD prompt, could not remove with CMD or via Explorer
  > Activate the hidden administrator account and remove using the Explorer/CMD
  > Change the folder permissions, raise my account permissions and creating a new user name or the group with my account with full access
  I spent the best part of 24 hours trying to solve this problem. I would like to avoid reinstalling Windows because I had already transferred 200 GB of data on my computer before I realized it was a problem. Any help to fix this would be greatly appreciated!

  Thanks for the reply. I totally forgot to include Unlocker on my list of failed attempts. It has disabled a lock that was in place, but has not changed and he could not remove the file. I tried to move the folder into a zip file too, so I could delete just that but while I am able to move the folder on my drive hard I can't move it to a zip archive.

  =========================================
  Sorry, I thought that Unlocker is worth the try.

  After all, you tried, I doubt that the following articles
  would be useful but they both recommend the disk cleanup.

  Windows 7 - How can I remove the Windows.old folder?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-remove-the-Windows-old-folder

  Windows 8 - How to remove the Windows.old folder
  http://Windows.Microsoft.com/en-us/Windows-8/how-remove-Windows-old-folder

  Since you have all your files backed upward... would not be a pure
  install Windows 7 will be the best bet instead of agony
  on this issue?

• 11.1.2.3 jdev how do I prevent users from access to the URL Taskflow

  We have a taskflow that has the parameter url-invoke-authorized.

  This taskflow takes 2 parameters - entity Id and mode

  In the form of research corresponding to this entity, we have 2 buttons - view and edit.

  If the mode is edit (Edit set button on the search screen), detail of the page opens in edit mode. If she is seen details of the page opens in read-only mode.

  We have an obligation to not show the button change on the entity if the entity is defined as 'ReadOnly' in the database. I was able to do it easily on the search page.

  But if the user is very intelligent and open new browser and stick the URL of the taskflow with 'Edit' as the mode setting, so I need to somehow implement the logic above - which is to check if the entity to which it wants to change is not read only status... otherwise I have to change the mode as 'View' setting and open the taskflow programmatically.

  How can this be achieved?

  The router has no definition of the page, but if you right-click on it and select go to definition of page it will create one for you. How do you check entityStatus? Why not put this logic in your implementation of the entity object or a transient attribute? Then you expose the attribute in your VO, and then you just need to get the definition of the page in your router. Once it is in the definition page you can use to select the activity you need to flow to go.

• I only have one user on my computer and it is a standard user, how do I use the administrative user if I can't access my files

  I only have one user on my computer and it is a standard user, how do I change my administrative account if I can't access my files or access my account

  Hello

  1. what happened to your administrator account?

  2. you remember to make changes to the computer recently?

  You will not be able to change your name from standard user to administrator.

  You can try to start in safe mode and check if you can create a new administrator account on here.

  Step 1:

  You can see the following link and start in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  You can view the following link to create the new user account:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Also check out the link:

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Hope this information is useful.

• I can not connect on my user profile who is also the administrator. I get a message that the password is incorrect, however I have not changed the password. s not now what it was

  I can't connect to my user profile who is also the administrator.  I get a message that the password is incorrect, however I have not changed the password. My 11 year old niece used the pc last (play online games) and I was informed that it was a download/installation, but do not now what it was. I can't download or update any information on the pc that this requires the admin password. I am currently using the guest account, that does not give me access to all programs and the pc is running a little slower than ususal. Your help with this questions is appreciated.

  the operating system is Windows Vista Home Basic 32-bit.

  Hello

  If your niece has changed the password, or you have a corrupted system, this Information Microsoft will help you.

  Here are the different circumstances where it can help you.

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  And as you say that your niece may have downloaded something, that something could have been malicious, that can cause problems with password.

  Download, updatre and scan your system with Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• Cannot access the password for administrator on Win7, how can we access this account?

  There are two accounts on this computer. An administrative and standard user.

  I can't access the administrative account. I forgot the password for this account.
  I can access the standard user account, but I can't change the administrative password because his account not administrative and I do not know the password on the admin account.
  How can I either change the standard user to admin user without having need of the admin password or how can I access the administrator account?
  The admin account is my main account with everything I need.
  His family win7 premium is a desktop computer.
  I, also, don't have Internet. The only internet I have is on my mobile phone with limited data.
  This is why I can't download anything to help.
  Help or knowledge is much appreciated.
  Thank you

  I can't access the administrative account. I forgot the password for this account.

  There are a lot of options built into Windows to help you out of this situation:
  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
  • Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)

• Can someone guide me how disable or disconnect a specific user of WiFi for laptop user and Mobile WiFi user without the user's knowledge.

  Hi, can someone help me to disable a user especially wifi?

  Hello

  Can someone guide me how disable or disconnect a specific user of WiFi for laptop user and Mobile WiFi user without the user's knowledge.

  Because I gave the WiFi setting for the particular user who uses more bandwidth. So, I need to disable his WiFi without his knowledge

  I need help on this

  Thanks in advance

  Waiting for a good and simple suggestion

  Change the WPA2 password on your wireless access point and tell them what it is.

• After the last update of xp, we have not been able to change user without password. What do we do?

  Original title: change user

  After the last update of xp, we have not been able to change user without password. We do not know the password. What can we do?

  See if that helps...
  Cannot lock a "locked" computer administrator
  Be sure to check your screen savers.

• Lock the accounts of users without apparent reason

  I have a XP laptop with several user accounts that require a password to connect.  Some of these accounts are defined for the user to change the password at the next logon.  The rest of them have already been modified by the user.  I have a user account with admin further rights to access the built-in Administrator account.

  When I started to work on this computer, check the status of all these accounts.  Often, some or most of them is locked.  I unlock all accounts and then do my work.  Before I stop I double-check these accounts and sometimes a lot of these accounts have already locked.  My own user account also locks and I have to CTRL-ALT-DEL twice on the screen to enter the built-in account.

  Local policy is set for the passwords expire after 180 days and for account lockout after 3 attempts.  The accounts that have recently been consulted properly are being locked.  Any ideas?

  Thank you.

  I have a XP laptop with several user accounts that require a password to connect.  Some of these accounts are defined for the user to change the password at the next logon.  The rest of them have already been modified by the user.  I have a user account with admin further rights to access the built-in Administrator account.

  When I started to work on this computer, check the status of all these accounts.  Often, some or most of them is locked.  I unlock all accounts and then do my work.  Before I stop I double-check these accounts and sometimes a lot of these accounts have already locked.  My own user account also locks and I have to CTRL-ALT-DEL twice on the screen to enter the built-in account.

  Local policy is set for the passwords expire after 180 days and for account lockout after 3 attempts.  The accounts that have recently been consulted properly are being locked.  Any ideas?

  Thank you.

  Hi, Frtundra,

  False lockouts can occur if you set the LockoutThreshold registry value to a value less than the default value of 10.

  http://TechNet.Microsoft.com/en-us/library/cc737614 (WS.10) .aspx

• Error message: Windows cannot access the specified device path and the second user cannot access the internet

  Original title: I have two users on Vista. We get to the top with windows can not access the specified device path.etc. The other has no problem

  The second user cannot access the internet. Can't access window appears. The other user is not problems.

  Hi Rickravel,

  1. what type of account you use?

  2. This only happens when you access Internet?

  3. when the problem started?

  4. you remember to make changes to the computer before this problem?

  Step 1:

  You can start in safe mode with network and see if the problem occurs in the account.

  You can see the following link to start in safe mode with network.

  Start your computer in safe mode

  Note: Restart the computer to boot into normal mode.

  Step 2:

  If you use Internet explorer, then you can try to disable add ons and check if it helps:

  Run Internet explorer with no Add - ons. Steps to open Internet with no mode of modules:

  a. click on start

  (b) in the search box, type in Internet explore

  c. Select Internet (no add-on mode)

  If you were able to access the Web site without any problems, then the module may cause the error.

  You can read the following article and try the steps to activate the modules individually determine which Add - ons may be the cause of the problem.

  How the modules of the browser affect my computer?

  Hope this information is useful.

• Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile