Webcam plays is not the video session

Similar Questions

• Windows Media Center plays soundtrac film but not the video.

  My Windows XP Media Center plays the soundtrac of movies but not the video.

  The display shows the similar factals when music is played.

  Latest WMC has been installed

  Any ideas?

  Hello

  1. do you know the file type you are trying to play?

  2. this happens with all DVDs you play?

  3. do you get an error message?

  Step 1: Try to update the codecs to check if the problem persists. See the below mentioned the Windows Help article.

  Codecs: Frequently asked questions

  Step 2: Check if you have the latest video drivers installed on the computer. You can log on to the computer for the same manufacturer site. Also, check the latest Windows updates. Check if all related drivers are available in the optional updates.

  Install Windows updates

  Step 3: Adjust graphics hardware acceleration. To do this, follow these steps:

  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.

  b. click on advanced settings.

  c. click the Troubleshooting tab, and then click on change settings.

  d. move the hardware acceleration slider two notches to the left of Full (the Disable cursor and bitmap accelerations setting).

  e. click OK, and then click Restart now.

  I hope this helps!

• Windows media player; I have a mpeg file played ok before the download Flash Player to move to another place; but now the audio wont play even if the video is very good

  I have a mpeg file played ok before the download Flash Player to move to another place; but now the audio wont play even if the video plays very well.  The mpeg file may was converted from another format mpeg before do me.

  Hello

  1. are you able to play the other mpegs successfully?
  2. what version of Windows Media Player do you use?

  I suspect that the file is corrupted.

  Method 1.
  Check if you can play the same video in a different media player.

  Method 2.
  You may need to check if the codecs work very well to play the file. Check if you have installed third party codecs. Uninstall them and re - install and then check.

  I hope this helps.

• Gigaframe L81 does not play sound in the videos shot by Nokia phone. Q81 can do?

  Hi all.

  My parents bought Gigaframe L81 photo frame.

  My mother tried to use the photo frame to see the videos shot by her Nokia phone. And the problem was only that no sound has been replicated by the photoframe

  AFAIK, new Nokia phones shoot videos in the following format
  Video: MPEG4 Video 640 x 480
  Audio: AAC 48000 Hz mono 768 Kbps

  When I look at Gigaframe L80 & L81 features at the stop. quote
  http://www.Toshiba.EU/PhotoFrame/detailsl80.htm
  I see that it is said in support of only Audio: MP3

  At the same time Gigaframe Q80 & Q81 claim to support more audio codecs:
  http://www.Toshiba.EU/PhotoFrame/detailsq80.htm
  Audio: MP3, AAC, OGG

  So, I have the following questions:
  (1) are Q80 & Q81 models actually higher than L80 & L81? My parents thought that L80 & L81 are better models, because they have a bigger screen. They thought that L80 & L81 should have more features. But it seems that Q80 & Q81 support more audio formats...

  (2) & Q80, Q81 don't actually support AAC & AAC in MP4 video files audio streams support?

  (3) how do I know if Toshiba will add support for AAC to L80 & L81? Or maybe my parents sell their L81 and buy Q81 or something else?
  My parents are not going to use the software that comes on the CD to convert their videos, the software first because is too difficult for them, the other reason is that it takes time to convert the videos to the formats supported by the framework, and that means that all the benefits of using an image on a PC went...

  Hello yura-v,.

  I am also a user Gigaframe L81.
  I asked the Support Toshiba team, if he releases a firmware update or something.
  They said no. Toshiba is not going to add support for AAC to L80 & L81 right now.
  If Q80 & Q81 actually support AAC & AAC audio streams support MP4 video files, I cannot say for sure, because I only own a Gigaframe L81.

  I think the best way is, your parents must buy a Q80 or 81 and test this.
  If both this doesn´t supports AAC streams they could restore the frame within 14 days.

  If they support the AAFC, they can sell their L81 framework and celebrate the Q80 or the Q81.

  Best regards

• Windows media player plays is not the wmv files

  I installed a new version of AMD Catalyst Software Suite V 12.2.00 08/03/11 and immediately pinned the problem of not being able to run the MWV Media Player files.  The media player will turn green and the audio works well.  I guess that my old (2008) Dell Studio 540 Intel Core Quad 2.66 Hz machine is too slow for all graphical applications included in the CCC again.  I uninstalled the entire update and installed the driver more AMD V 8.950.0.0.  Rebooted and tried to execute a file on Media Player WMV.  The same problem.  I went back to a restore point, until the day before the installation of the new version of the Suite software Catalyst.  Then I rolled back to the previous driver V 8.920.0.0.  Does not solve the problem.

  I finally ended up at this place where someone posted the same problem.  I went if the three methods that have been listed.
  Method 1: Go to the Play-year-audio or video file FAQ
  Result: Nothing useful there.

  Method 2: Re-save the file and check, it is that it works.
  Result: Panel received
  DllRegisterServer in successful wmvdecod.dll OK

  Method 3: Change screen Resolution.  My procedure was different from that used by anyone trying to help the first user.  I'm running Windows Vista 64 - bit SP2.  I had to go through the display settings, advanced settings.  Click on change settings and I received the message: your current display driver does not allow changes need to be made to hardware acceleration settings.  I then clicked on the Troubleshooting tab and received the following panel;  Catalyst Control Center cannot be started.  Currently, there are no settings that can be configured using Catalyst Control Center.     No big surprise that I had uninstalled the CCC.  Should I reinstall again?

  Having listed all the codecs on my machine, I have no idea what to do with them.  The only one that seems to apply is WMVideo Decoder DMO.

  My profile is:
  Dell Studio 540 Intel Core Quad 9400 Hz 2.66 6 GB memory
  Vist Windows 64 - bit SP2
  Dell E207WFR ATI Radeon HD 3400 Series
  Driver AMD V 8.920.0.0
  Windows Media Player V 11.0.6002.18311

  Hello

  (1) is there an error message or an error code during playback of .wmv files?

  I suggest to disable audio enhancements and check if you're able to play .wmv files. Follow method 1 to disable audio enhancements.

  Method 1:

  a. Open Sound by clicking on the Start button, and then clicking Control Panel.

  (b) in the search box, type sound, and then click sound.

  c. on the playback tab, click speakers and then click Properties.

  d. click the enhancements tab, and then select turn off check all sound effects box.

  Method 2: Uninstall and reinstall Windows Media Player with Windows features enable or disable:
  Step 1.
  Uninstalling Windows Media Player:
  (a) go to start and in the search type "Turn Windows has or not.
  (b) click on "Turn Windows features on or off".
  (c) access of media features and uncheck the brand in the face of Windows Media Player.
  (d) restart the computer
   
  Step 2.
  Reinstall Windows Media Player:
  (a) go to start and in the search type "Turn Windows has or not.
  (b) click on "Turn Windows features on or off".
  (c) access of media features and place a check mark in front of the Windows Media Player.
  (d) restart the computer.

• How can I Center the play button on the video?

  http://www.VideoJS.com/

  Thank you

  Hello

  Seems that you have already set up and left for the ' play' button in the class that you are using, but somehow, I'm not able to understand this.

  I tried to define:

  left: 450px! important;

  top: 150px! important;

  In the class = "vjs-large-button play, so that it overrides the previous value, and the button comes in the middle of the video image.»

  

  You will need to set the top and left side so that the button must be placed in the middle.

  Thank you

  Sanjit

• How to create a play button to the video clip using AS3

  Hello.

  This new bit and searched the forums adobe and google. I am trying to create a button that will play an any MovieClip.

  I have a clip that I imported into its own layer of rebar (layer1) 1.  I gave the MovieClip an instance name of foundationMovie.

  I created a button and that on its own layer (Layer2) above layer1, is also in the picture 1.

  I added a

  Stop (); action of layer2

  The video is not set to AutoPlay.

  I want the video to start playing when the viewer clicks the button.  I know I have to put some sort of event using AS3 listener in my calendar somewhere.

  I found a code and I tried to work with her.  I'm sure I've mutilated it beyond usability, but it's what I have.

  Stop ();

  player.addEventListener (MouseEvent.CLICK, play);

  function play(event:MouseEvent)

  {

  gotoAndPlay ("foundationMovie");

  }

  If someone could point me in the right direction or help me with my code I would really appreciate it.  Thank you.

  If you use the FLVPlayback instance it should be on your scene, or you should have the code added to the scene. If you use the FLVPlayback instance, you don't need to import the video file, you have to have the component dynamically load by assigning the file to its source property.

  That said, the code that I showed earlier would continue to operate if the component FLVPlayback instance name of the instance 'foundationMovie '.  It's because the component has a play() and stop() supporting method.  What you need to do probably, is looking for the FLVPlayback class in the help documentation of Flash to see all that is avialable for her regarding the properties, methods and events.  You will probably find there examples as well to help you configure things.

• How to restore the tabs, not the previous session, but a session before

  I have a number of open tabs for resources that I need for a project. I've not will work on this project every day so I always restore from a previous session. But if I have a session without these tabs then the current tabs will become the previous session. How to store the session I have to restore it not at the next session, but in a session that follows so the general question?

  Hi CatsUncleNedThomas, if you want personal advice on these issues, please start a new question. You can do this by using the following link:

  https://support.Mozilla.org/questions/new/desktop/fix-problems

  Scroll down beyond the solutions suggested to continue with the form (I think he has 3 different screens).

• Firefox is not the video, that is to say, is there something that has no downlioad with Firefox?

  I just downloaded Firefox on the suggestion of my HP tech to graphics problems in IE9. After downloading, I went to Fox News to see if video performance would be better, but the video is not yet right. Why?

  You do not have the plugin Flash for Firefox installed.
  
  You do not have the "Adobe Shockwave for Director" plugin, but it's a different plugin.

  Install the latest version of Flash.

  • https://support.Mozilla.org/KB/managing+the+Flash+plugin
  • http://www.Adobe.com/software/Flash/about/

• I burned a DVD of my camcorder via the pc. I tile not the video and now am not able to remove it from the pc's memory since I'm not. My memory is all sold out.

  I burned a DVD of my camcorder via the PC.  I have not the job title and the I am currently not able to find the data in order to remove it from the computer - memory is all sold out.

  Hello Netzoo,

  Welcome to the Microsoft Answers Community!

  First place to check would be the place that the program saves by default. You can test it by importing a video (maybe a few seconds of blank film), then click on the registration option. That first record appears in the Save dialog box is where the program normally / last saved a file. Each program is different, but generally unless the project is recorded information is stored in a .tmp (temporary) format and then cleaned when the program stops. You can clean any .tmp among other files using Disk Cleanup:

  ·         Click Start

  ·         Click on all programs

  ·         Click on Accessories

  ·         Click Disk Cleanup

  ·         Check the boxes for the files you want to clean

  ·         Click OK

  Hope that helps, I look forward to hearing from you.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• First Pro exports only my audio, not the video

  I'm a beginner to this program, so please bear with me.  I'm in first Pro CC (2015.3) v 10.3, blue Fox on a PC with Windows 7 Pro. The Media Encoder is also Media Encoder CC (2015.3). When I queue to export the Audio/video file, I chose H.264 and AAC Audio.  The video and audio of boxes are ticked for export.  I have the game - high-speed selected Source and preset of Facebook.  Is the screenshot after I encoded the file, but I am able to see the process of Audio and video, while it exports the file.

  Here is the screenshot of my Premier Pro screen. I had created a couple of these slide shows before and everything worked very well.  Now for some reason, there is only Audio now.  I tried it with two series of photographs with the same results.

  Any help is appreciated and I apologize if this is a repeat problem, but I don't see anything that fits my situation specifically.

  When you are working in a new project (or new sequence) and you add the first piece of media in your timeline (sequence), if the media card to match the settings of the sequence, it will ask you "Do you want to change the sequence to match the media" and you have done this, no other way to get an image size of 4608 x 3456, which is not equal to any standard video format. Is also 4:3 and not 16:9 for the video output screen. So unfortunately, if the configuration of the sequence is bad at first, your project is built on a poor Foundation that will cause problems later when you try to export to a standard format.

  If you want to put the video on Facebook, that would be 1920 x 1080 or 1280 x 720 for instance (1080 p or 720 p). Your sequence should be created accordingly before adding any media. In Prefs or sequence by sequence, you can use the size value of the frame to have the media scale in sequence (photos/video will scale to fit the image).

  Try changing the size of the image in your sequence up to 1920 x 1080 settings. You may need to click on the pictures and also the value size of the frame.

  EDIT: also change the audio sample rate of 32000 to 48000 which is more standard and superior

  EDIT 2: If you put 4:3 pictures in a 16:9 frame, yes you get black bars on the sides. As the top and bottom of the pictures of the boat may be just the water and the sky in any case, you can change the image until it fits left to right, cropping the top and bottom which you can't miss anyway. Can also set vertically then necessary. Use the Adobe movement controls for these actions, found in the effect controls panel.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• When I add a video on my calendar, it allows only the audio, not the video. It is in MOV format.

  I'm working on my first project with elements first, and when I add a video to my computer, it will add it only for audio, not the film section. All my files are in MOV format. I am able to open the same file in Microsoft Movie Maker, but not in the first of the elements.

  geigerlau

  Your specifications video camera and your lack of QuickTime presets, it's almost a certainty that the installation of the first Elements needed as QuickTime will solve your problem.

  What could be your problem is the use of a video codec MotionJPEG for your video. Your camera seems to offer MotionJPEG video codec, but only as an .avi file. The video codec that goes with the file from your camera .mov is H.264. Thus, with an extension of the .mov file, you do not have the question common to Premiere Elements MotionJPEG any version.

  Please let us know if the installation of QuickTime works for you. It should based on what I've read online on your camera and knowing the requirement of Premiere Elements for QuickTime.

  Thank you.

  RTA

• Satellite A300 - webcam works do not, the message says "webcam driver open fail.

  It says "driver webcam open fails, restart the computer or the camera.

  I did it but I don't know what else to do to fix

  Please help I need for an assignment to the 12th

  any help is appreciated

  thnx

  Remove the preinstalled version of the system and install the latest version, you can find on the download page of Toshiba.

  By the way: what operating system do you use?

• Help! Just music is played, not the video:)

  I just finished editing a video and exported to a movie file...

  but when I tried to watch it there was no video to watch.

  The file was there, but he just played the sounds

  Someone help me, please!

  redfoxtail15

  There is a known issue from Microsoft with Windows 8/8.1 and Windows Media Player to play video that uses MPEG2 video compression.

  In this case, most of the users have used the free VLC Player as the substitute player.

  You didn't say if you have a video export MPEG2.mpg or what you first export items is.

  LL-not-open-MPEG-2-files/92ba38ae-4315-4c0f-a3cc-250bbdce860a?auth=1 http://Answers.Microsoft.com/en-US/Windows/Forum/windows8_1-pictures/Win-8-Media-Player-Wi

  Please review and consider for MPEG2 and other video compression in an export.

  Looking forward to your results when your schedule allows.

  Thank you.

  RTA

• . I have Windows Vista Home Premium. When I try to play a video file that is attached to my Windows Mail, playing audio but the video is not displayed on the screen.

  Because video (photo) is not shown there is no window to control me, IE; delete, stop. I have to wait until the audio stop. I can even click on another email and the audion continues until it stops on its own. Very frustrating.

  I've recently updated to IE9 and this problem started. I can see the other attachments, photos, etc., but must double-click on the icon of attachment (paperclip) displayed next to the email listed. Attachment icon does not appear with the body of the message. There is also a change from my old e-mail program used before you download IE9. I think I liked much better IE8!

  Hi JeanneChancellor,

  ·         What is the file format of the attachment?

  Method 1: Try saving the file to the computer and check for the issue.

  Method 2: Check if the update of Codecs can help with the issue.

  Codecs: Frequently asked questions

  See also:

  Solve problems with Windows Mail