Webcam works do not vpceh15en vaio

Similar Questions

• HP Webcam works do not.

  HP Webcam works do not... It comes up saying media has stopped working... what should I do?

  Hi DebraParker,

  1. is the webcam listed in Device Manager?

  2. did you try to install the updated driver?

  Step 1:

  You can try to run the material fixit and see if it helps.

  Hardware devices do not work or are not detected in Windows

  Step 2:

  You can also check the HP website and try to update the latest version of the drivers for the Webcam.

  HP drivers & downloads

  Hope this information is useful.

• Webcam works does not after update

  After a recent update on my Windows 7, no webcams work longer. Locate the can´t system, as are they connected werenâ´t.

  I have can´t reinstall the device drivers, because I have a Microsoft LifeCam VX-500, and its pilots are supposed to be a native component of Windows 7. I also tried with other devices, and none of them does not work either.

  After a recent update on my Windows 7, no webcams work longer. Locate the can´t system, as are they connected werenâ´t.

  I have can´t reinstall the device drivers, because I have a Microsoft LifeCam VX-500, and its pilots are supposed to be a native component of Windows 7. I also tried with other devices, and none of them does not work either.

  You can always reinstall drivers even if they are native in Windows. Go to control panel and open the Device Manager. Look down the list of all references to your webcam (video, microphone, etc.). They may appear with a yellow! mark indicating there is a problem with the driver, or they might not. If none does everyone try to enable 'Show hidden devices' in the view menu. For each entry in webcam that you find, right-click on it, select properties then driver. Click on the button that says "roll back driver". The earlier work driver should then re - install.

  If the Roll Back driver option is disabled which means there is no new driver installed. You can always reinstall the driver however. Right-click on each entry in webcam and select uninstall driver. When it is unplug your webcam. Reset is optional, if not plug your webcam into even once (in a port on the computer NOT to a hub) and Windows should re - detect and install the drivers again.

  In case it was an update of the driver who caused your problem when you rolled back each of the webcam drivers and tested the camera working again, go to Windows Update and look for the updates. The problem with the driver should appear again. From the screen to view updates (the one with the details on upgrades), right-click on the update of the webcam driver and select "hide update". After that it shouldn't bother you again.

• Webcam works does not in my dell n5110

  It comes to my webcam on dell n5110. This problem has a bit of history. So far, the story is like this:

  The webcam worked perfectly for about a year. I have not used for about a month and then when I try to use Dell Webcam central application showed webcam not detected error. I tried other software like Skype and other chat tools webcam online, but the result was the same. Then I posted a similar message on this forum looking for an answer. People were really helpful and they gave me different types of tips and methods to try.

  I tried all. It was not all devices under imaging devices in Device Manager. There is no unknown devices listed either.

  I used dell troubleshooting tools both online and offline, they all said that there is no such device on your laptop. They did not have a clue on a webcam.

  I have re installed Dell webcam central software. But nothing has changed. I also removed all the usb devices on Device Manager and let them to be reinstalled. Yet, there is nothing.

  They advised me to Flash the bios. I tried, but the application was released showing "cannot Flash the bios to the same version. I tried to load the default settings in the bios.

  Then I removed the front panel of the laptop and unplugged and plugged cable connection webcam from the top as they said, it may be a bad connection. However, he did not a difference.

  Days like this and a few days later, when I turned on my lap, a new notification of pilot plant appeared and the USB device has been installed. And Yes, this is the driver for the webcam. Webcam was working fine. I ran the test on the application dell several times and webcam passed between them all the time. It was just like new. But it was not consistent. Webcam disappear suddenly as in the first case, leaving no clue as to what happened and then came back in the same way as before. I don't know what caused the web cam to do. This happened several times.

  Now, it's the history of the problem.

  • He worked like that for about three months. And now the webcam didn't go back a month. I think on the replacement of the webcam. The question is whether it will solve my problem?
  • What are the symptoms of a hardware failure? Only, I checked the connection of the cable to the module of webcam. Can there be a bad connection at the other end of the cable?

  Also, I believe that the network of microphones is also in the webcam module. It worked very well, even when the webcam was missing. And it still works very well.

  • Webcam and microphone two separate units or they come together?
  • The connection of microphone array goes through the same cable from the webcam? If this is the case, the possibility of a failure of the webcam because of the bad connection may be cancelled?

  A lot of questions. I waiting for your good advice.

  Thank you

  Hi pavan_m4,

  Thank you for your patience and all the troubleshooting steps to solve the problem. I suspect it is the hardware problem. Given that the camera worked after the new update of driver, try to restore the system to factory State. Back up the data before you restore the computer. Please click on the link for Windows 7 PC Restore:

  http://Dell.to/15DfFoj

  In case the problem persists even after PC Restore, you can consider replacing the Webcam. Camera and microphone cable are integrated and it is a single cable.

• WebCam works does not in Satellite L50-A-18R in Windows 10

  Hello

  A few weeks after an update of windows or something, the webcam has stopped working under windows. It is not a hardware problem, as it works fine under Ubuntu.

  Laptop model: Toshiba Satellite L50-A-18R
  Webcam hardware ID: USB\VID_04F2 & PID_B41A & REV_2960 & MI_00

  Tried:

  • Uninstall of & reinstall the driver in Device Manager
    • If I try the option "Online search", he is unable to find the driver.
  • Toshiba Web Camera Application installation [does not work either]
  • Reinstalling System Toshiba settings app.
  • Research online the ID of material for pilots.

  But it doesn't help, need me the driver files to make it work again.

  Thanks in advance for the help.

  Apparently, it was a problem with Windows, as it is fixed with the update of 1067. [Update of the birthday]

• Satellite A100: webcam works does not for windows live messenger on Vista

  I recently lost my picture when working for video calls in windows live messenger, the sound of two ways and I can see them, but no one can see me.
  I also bought an external webcam, and it does not work either.

  When I go to Device Manager it says that the two cams don't work properly.
  I tried to update the drivers but they are up-to-date.
  I wonder if it's a problem of Windows live or Toshiba.
  I use Windows Vista Home Premium and the new version of messenger.

  > I also bought an external webcam and it doesn t work either.
  > When I go to Device Manager it says that the two cams don't work properly

  For me, it looks like a windows system problem.
  Usually two webcams operate independently from each other and so I don t think that it is a webcam driver problem I think that it s windows or windows live messenger problem
  Maybe something confused keys registry or files may be some updates to update or similar

  In your case, I recommend you to uninstall the software of webcam software, internal external webcam and the windows live messenger.
  Then, you must clean the BONES and the registry tool like CCLeaner cleaning, for example. It the free tool.

  After this, reinstall the Chicony webcam software and test functionality without installation of windows live messenger.
  If the webcam will be functions then you could install the windows live messenger again.

• Webcam works is not on my hp pavilion13 x 360

  I have the sam problem. I have 10 windows on mine. I made solutions of troubleshooting to affect compatibility Windows 8, and that did not help. The proposed solutions do not work. The only solution is to BUY their update.

  Can I put on another program instead?

  Thank you

  Debra Matz

  Hello @Debbi,

  Thanks for the quick response!

  If you are comfortable with the process, you can try to disassemble the laptop to check if the Webcam is connected correctly.  You can use this guide to help you, if necessary:

  PC HP Pavilion x 360 Convertible (model numbers: 13-s000 through 13-s099) Maintenance and Service of Guide (Chapter 5, Page 38-41).

  If you are not comfortable with the process, then you can consider contacting the HP support by phone for additional options.

  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• Webcam works do not code 10

  Please note that the webcam did not work right since I bought it. I now have a new grandchild, I have never met.please anyone out there can me.i have a hp pavilion dv9000.

  If your webcam is integrated into the PC, then you should speak with the vendor's support team.

  See, for example: troubleshoot Webcan in Windows XP, or Windows Vista Webcam problems.

• Webcam works do not!

  If you are having problems with your webcam, I have some suggestions that may help with the problem.

  If it is a recent issue so your first option can be a system restore. Here is a link to instructions on how to use system files to return the computer to a previous point in time.

  Here is a link to a webcam troubleshooting if the restore does not help or if you don't have a restore point that works.

  I hope it's useful!

• Webcam works does not in Studio 1535 with Windows 7

  Hello

  I have a portable studio 1535, it came with the Windows Vista operating system. However later on, I had installed Windows 7 Ultimate OS. My webcam first worked with Win 7. But for some time it does not work. I downloaded the driver for the Webcam (CREATIVE-LABS_INTEGRATED-WEB_A05_R207341) for vista from the Dell Web site. But when I installed it, at the end of the installation, it displays error message ""an error occurred during configuration of the driver.". I use the Dell Webcam Central software for webcam, when I run it displays messages "please connect a supported device".

  Please guide me to solve this problem.

  Thank you.

  Thanks for your reply. I tried the diagnostics and the other suggestion. In the end, I open my laptop screen laptop and found that plug a little besides that the camera wasn't attached correctly. I joined it and then reboot it installed drivers and now works correctly.

  Once again thanks for the reply.

• Webcam works do not, Lenovo U310, Windows 7, 64 bit, Youcam not detected

  I have a Lenovo U310, Win7 64 bit which is around 2 years its integrated YouCam 3 webcam is inoperative for a few months now.

  Cyberlink YouCam does not appear in the device indeed Manager that no camera is to be detected despite the opening of hidden devices. A virtual driver Cyberlink WebCam is under sound, video controller & game, do not know if it is.

  Clicking Youcam, request alerts, " No webcam detected, try to connect or switch". I reinstalled YouCam driver Lenovo site several times now. But it still won't start.

  It's already happened and one day he started work. Need to understand the issue and fix it for good.

  Thank you

  Hello

  Thanks for posting your query on the Microsoft Community.

  I suggest to create a new user account with admin rights and check if the problem persists. Check out the link for more information below:

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  If the problem persists I would recommend you contact the manufacturer of your laptop, because it might be an unwanted material. See the link below for more information:

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/IdeaPad-u-series-laptops/IdeaPad-U310

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help.

• Webcam works is not on my HP pavilion dr7-4122nr

  I had changed my hard drive and lost my Recovery Manager. After several attempts to return my book back to a sort of running status. I discovered that my webcam is more listed in my device file. Downloaded the software of the webcam on HP site and still cannot locate any function for my webcam. Remember that I also installed lostmy HP media smart audio file. If there is someone out there who could help would be highly appreciated. Also, I must say that I have tried msconfig in start.

  Hey Wesley.

  Just make sure that the webcam is detected in Device Manager.

  1. type Device Manager in the Start search and press on enter.

  2. browse the imaging devices and to see if there is no driver listed.

  3. right-click on it and click Uninstall.

  You may be asked to completely remove the drivers from the laptop. Press OK and continue.

  4 type uninstall a program to search for , and then press ENTER.

  5. check if HP , web camera software appears, in the affirmative, then Uninstall it.

  6. restart the laptop. Each reboot the laptop, windows will automatically try to detect the web camera and try to install the drivers through Windows update. If it doesn't, then you may install the downloaded drivers from the HP website.

  Go to Device Manager to make sure that the webcam is detected and is not a yellow sign. If so, then right-click on it and click on Update driver software.

  http://Windows.Microsoft.com/en-in/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  If nothing works, then download and install the drivers for the chipset for the HP Web site.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  Hope this information helps. If you have any questions, please let us know.

• Webcam works does not for windows 8

  Hello

  Yesterday I installed GoogleVoiceandVideoSetup to use Gtalk WebCam but after installing it, my webcam does not work.
  It doesn't show any picture, can someone help me on this.
  Kind regards
  Gaurav Dey

  I found the solution: -.

  I went to the Device Manager. Rode to the previous setting, and after that I re-installed the latest drivers and it works for me.
  :)

• Satellite L850 - A925 Webcam works do not (broken lines that appear)

  Dear community peoples,

  I have a Toshiba Satellite L850-A925 for 6 months. And I have this annoying problem with the webcam.
  I installed all the drivers and even when I turn on the webcam application, it gives no error.
  The only problem, I don't see anything on the cam on my side.
  Just a black screen with a few stripes of color around moving more and there.
  If please suggest me a good solution for this or is this a hardware problem?
  I had attached the screenshot of what exactly Iam get when I turn on the webcam application or other applications using the webcam (Skype, Oovoo,...).

  Please help me on this and I'm hoping for a simple and effective solution.

  Thank you best regards &,.

  Mohamed Marzook.

  Link to the screenshot:

  http://Tinypic.com/r/2v9u0sm/5
  [http://i41.tinypic.com/2v9u0sm.png]

  Hello

  Since when did you notice this problem? I can't imagine that it occurs on the first day.
  In the specifications, I found the info that this machine has been preloaded with Win7 64 bit. Everything is OK with the factory settings was after the first start?

  Easy solution? Everybody wants it but the problem is that on this virtual way in most cases we can only speculate what may be the problem.

• Satellite A300 - webcam works do not, the message says "webcam driver open fail.

  It says "driver webcam open fails, restart the computer or the camera.

  I did it but I don't know what else to do to fix

  Please help I need for an assignment to the 12th

  any help is appreciated

  thnx

  Remove the preinstalled version of the system and install the latest version, you can find on the download page of Toshiba.

  By the way: what operating system do you use?