WebService call ends in error check during after decoding (after update to Flex builder 3 /Flex builder 2.01 hotfix 3)

Similar Questions

• Error code 61499 after update license (FPGA)

  Hello

  I am a fairly experienced user of FPGA module.  I have LabVIEW 2009 installed (version 9.0.0) including the FPGA on XP 32-bit module.  Everything worked well and I had a project specific FPGA that had been built and run in the last month or so.

  In the meantime, the license has expired, so I had to update the license.  After update of the license, I made a trivial change in VI (default values has changed some entries to the front) and tried to compile and run.

  This has generated the error-61499, with additional information:

  Error starting compile step: make sure that a compatible version of Xilinx tools is installed in the location specified in the Setup from LabVIEW.

  I looked after error-61499 in LabVIEW FPGA and a few other positions.  I checked the path of compilation of LabVIEW FPGA registry keys and it seems fine (C:\NIFPGA2009\Xilinx\ISE).  This directory exists and is the right size (3.74 GB).  A temporary directory is created in C:\NIFPGA2009\srvrTmp\localhost.  I searched the pearl58.dll file but couldn't find it.

  When I look at the license installed recently and the license has expired in the License Manager NOR, I see no difference between the two other than the expiration date.

  Summary: I had a working facility and the project, updated the license file and now get error-61499.

  ???

  With the help of an Application engineer, I tried two things.

  First of all, I tried to 'fix' the FPGA Module through the "Add or remove programs" utility in Control Panel.  That had no effect.

  Then, I downloaded and installed NOR-RIO 3.3.0 of the support zone, drivers and updates.  That solved the problem!

  So, for someone who has a similar problem in the future, try to reinstall the driver OR RIO.

• Checksum error ORA-20503 after update

  Hello
  
  in my application, I have a page with a form based on a table. With a button I run a stored procedure in the database via javascript. This procedure changes the value of a column that is indicated in the form table. When I want to make changes in the form of the application generates an error of ORA-20503 checksum which is OK because the checksum has changed.
  
  How is it possible to do an automatic requery after the execution of the stored procedure?
  
  Thanks in advance.
  
  Martin

  Martin:

  I think that the document on page 50 is re-loading. However, I think that reloading happens even before that your stored procedure did its thing to update the database. We can check if it in fact the case.
  Change your Javascript as below

  function waitSome()
  {
  clearTimeout();
  window.location.reload();
  }
  
  function callReport(p_href,p_url)
  {
  var url;
  // window.location.href = document.getElementById(p_href).value;  // dont reload here
  url = document.getElementById(p_url).value;
  w = open(url,"winRep","Scrollbars=1,resizable=1,width=800,height=900");
  if (w.opener == null)
  w.opener = self;
  w.focus();
  setTimeout("waitSome()",5000)   // wait 5 seconds before reloading
  }
  

  With these changes, doing just that now your function callReport is in the PDF window popup and then wait 5 seconds before running the 'waitSome' function which, once exected will reload the main window. You can change the amount of time waited by changing the second parameter of the function "setTimeout". The expected time is specified in milliseconds.

  CITY

• Photon: Having an error with WiFi after update

  @mark tested Thoroghly? Care to explain why the wifi worked when the update came down and now he refuses to work? I press the toggle to turn on wifi and I'm greeted by 'mistake' in small letters beneath him.

  Awesome - did you actually make it useless for me down here! B/C the SIM/APN issue was over I was running my data on a device of type mifi down here, and now you've done the phone useless.

  Test? EXPLAIN WHAT IT MEANS?

  I CHECKED - YOU BROKE MY PHONE AND COST ME MONEY AND LEFT ME STRANDED WITHOUT IT ABROAD

  VERY NICE WORK

  and Yes, I have now restarted several times after the "must-have update' you forced on my phone without warning

  I'm beyond mad - my wifi never returned after that

  everyone - be aware that it may hard affect your ability to use wifi

  
  

• Impossible to access Visual Studio and MTM and get errors in IE after updates

  I get a lot of unhandled exceptions after the recent microsoft security updates.

  (1) whenever I open internet Explorer, I get a message that the internet explore has stopped working. I click on debug and it tells me there is that an unhandled win32 exception occurred in iexplorer.exe [6028]. Note: the code [x] continues to change and does not remain @ [6028]. A different code everytime I open. (another pop up im getting is "to help protect your computer, data execution prevention has closed IE.")

  (2) I am able to connect to my TFS via VSTS and MTM. My VPN is connected correctly. I have ping Web sites and they are running.

  Note: I did a restore of the system several times and my computer works very well after the system restore. Once install updates for windows, my computer starts again give me the above questions, then I know it's something to do with the windows updates.

  Any thoughts? These updates are updates of security, so I don't want neglecting them to do a system restore, but all reported these bugs again so a patch can be sent?

  Thanks for the reply Aziz. I ended up remove the internet Explorer and reinstall the inside and the problem disappeared. I appreciate your time and use your troubleshooting techniques so that I will again meet this issue.

• Qosmio X 70-B-10 t - internal error of power after updating the graphics driver

  Hello world

  Ive not long has this laptop and every time I install the AMD Catalyst software on it so I can use the AMD graphics card I get a BCOD telling me error of internal power followed continuous restarts with the same error before system restores a delay before the installation of the driver. This is with Windows 8.1 because I have not upgraded to Windows 10 as of yet.

  I tried to install the latest drivers about 4 times now, but the same thing over and over again. As soon as the installation of system software and restarting the laptop for the changes takes place, the internal power error starts. Someone know how to fix this or should I take the laptop under warranty?

  I know that the fault of power internal but only as part of the Windows 10

  It has already been discussed in this thread
  https://Forum.Toshiba.EU/showthread.php?83849

  The problem was related to the AMD graphics driver and Windows system and this has been resolved by Windows update.
  If you get the BSOD install the AMD, so the current driver disk could not be fully compatible with your system 8.1 Win.

  Also the missing system update may be due this... so make sure your OS 8.1 Win is already up to date and use the reader to AMD released by Toshiba.

• Pavilion G6: Error Code 43 after update Intel HD graphics card

  Hello.

  My laptop HP Pavilion G6 consists of cards 2 graphs: 1-Intel HD Graphics Family

  2 Radeon HD 6470 M

  Today, I opened my device manager, and I tried to update my Intel HD Graphics. Finally, there is an update for it, and after it was done, it displays Intel HD Graphics 3000 This is after I restarted my computer.

  After the reboot, my Intel map updated. However, I have re open Device Manager, and I see that the Radeon HD 6470 M has an exclamation mark above. I opened the properties and I see a message saying: Windows has stopped this device because it has reported issues (Code 43). This has happened after that I updated my Intel card.

  I fixed it with the restoration of the system. But can someone tell me why this happened? The Assistant de Support HP r says there is no update available, Device Manager must therefore determine that the card Intel is up to date.

  Any help? Thank you.

  Try here Intel driver update utility:

  http://www.Intel.com/p/en_US/support/detect?IID=dc_iduu

• Hi, receive 80070663 error message during the installation of update of security for Microsoft Office PowerPoint 2007 (KB2464594)

  some of the recommendations tried re: msconfig, but did not work. Any help would be appreciated.

  Hi thomasnixon,

  1. have you tried to install the manully updated?

  You can try to install the update manually and check.

  Check out the link:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=6B2526FE-A061-4A17-992E-AC867BEF130E&displaylang=en

  If still face problems, you can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Hope this information is useful.

• error code 646, after update load down.

  KB981726, KB976321.these update is not installed, because of the error code 646 hmendezlopez

  1. http://www.microsoft.com/downloads/en/results.aspx?freetext=KB981726&displaylang=en&stype=s_basic

  2. http://www.microsoft.com/downloads/en/results.aspx?freetext=KB976321&displaylang=en&stype=s_basic

  Hi there, manually download the updates of the links above and install the same. Save updates to a location on your hard drive, you can find and then install.

  HTH

  TaurArian [MVP] 2005-2010 - Update Services

• Error code during the installation of update

  What means this error code means Code error 80072EFE

  + How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  or

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  TaurArian [MVP] 2005-2010 - Update Services

• Error code 0xc0000034 after update SP2 for Vista

  Hello

  Yesterday I ran my windowsupdates, one of them was SP2. When I rebooted the computer, a black screen appears with the error code ! 0xc0000034! 142/46596 (_000000000000000.cdf_ms)
  I turned off the computer and restarted again. I chose the recovery mode, but no results, the recovery was loop.

  What should I try next?

  Thanx

  Try to do this first, and then restart.
  Then try again.
  You have the disc from your computer's system?
  You may need to reformat.
  I hope you have backup.
  Good luck.

• Error 663 during the installation of update KB2656353

  I get error 663 when trying to install the automatic update KB2656353 update.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Why my pc tells me network timeout errors occurred during the download of update itunes? How to change the time-out settings?

  I can download but when it comes to treatment of file I have error 3259. network time out

  Read article from Apple about the error 3259
  iTunes Store report error - 3259

  http://support.Apple.com/kb/TS2799

  Thank you

• HISTORICAL calls blackBerry Z10 IS TOO SHORT AFTER UPDATE

  Dear friends, my call history is too short now... before the update my phone I can see who is calling or I called before 3 months ago... now I can see only the last 3 days... pls help

  Historical 10.3.1 calls is limited to 150 pieces

  We received comments on it being too short for our product is the assessment to increase this limit in the subsequent updates to BlackBerry 10. Thank you!

• I get a fatal error message during the installation of updates

  Cannot install Windows Live Essentials

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  ______________________________________________________________

  or try Windows Live hrlp Forums

  http://windowslivehelp.com/