Checksum error ORA-20503 after update

Similar Questions

• Error code 61499 after update license (FPGA)

  Hello

  I am a fairly experienced user of FPGA module.  I have LabVIEW 2009 installed (version 9.0.0) including the FPGA on XP 32-bit module.  Everything worked well and I had a project specific FPGA that had been built and run in the last month or so.

  In the meantime, the license has expired, so I had to update the license.  After update of the license, I made a trivial change in VI (default values has changed some entries to the front) and tried to compile and run.

  This has generated the error-61499, with additional information:

  Error starting compile step: make sure that a compatible version of Xilinx tools is installed in the location specified in the Setup from LabVIEW.

  I looked after error-61499 in LabVIEW FPGA and a few other positions.  I checked the path of compilation of LabVIEW FPGA registry keys and it seems fine (C:\NIFPGA2009\Xilinx\ISE).  This directory exists and is the right size (3.74 GB).  A temporary directory is created in C:\NIFPGA2009\srvrTmp\localhost.  I searched the pearl58.dll file but couldn't find it.

  When I look at the license installed recently and the license has expired in the License Manager NOR, I see no difference between the two other than the expiration date.

  Summary: I had a working facility and the project, updated the license file and now get error-61499.

  ???

  With the help of an Application engineer, I tried two things.

  First of all, I tried to 'fix' the FPGA Module through the "Add or remove programs" utility in Control Panel.  That had no effect.

  Then, I downloaded and installed NOR-RIO 3.3.0 of the support zone, drivers and updates.  That solved the problem!

  So, for someone who has a similar problem in the future, try to reinstall the driver OR RIO.

• Error: ORA-02429 after using expdp/impdp

  Hi all
  I have a problem: when I save my 11g database and restore the database to another name I can't drop specific index.
  I get this error: ORA-02429: cannot delete the index used for the application of unique primary key.
  
  Note: I can easily delete this index before I run backup/restore procedures.
  Here are the steps.
  
  (1) creation of database D1
  (2) Save:
  expdp * schemas = D1 dumpfile = D1.dmp logfile = D1.log *.
  (3) create a new db user
  CREATE A USER IDENTIFIED BY D2 D2...
  (4) restoration of D1 to D2:
  Impdp D1/D1* remap_schema = D1: D2 dumpfile = D1.dmp *.
  (5) at this point, I'm getting another identical database D2. but for some reason, I can't drop some clues as described above.
  
  Any ideas what Miss me in the process. No impdp/expdp modifing my databes somehow?
  
  Thank you very much.

  Ok
  You can do the following

  1. disable all constraints.
  2 create a script to drop and re-create the index
  3 delete the index
  4 turn off the constraints of
  5 impdp CONTENT = DATA_ONLY
  6. run the script to create indexes
  7. activate the constraints
  8 activate triggers

  See this post
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14215/dp_import.htm#sthref273

• Gets the error ORA-01779 after I added the column

  Hi, I'm a total newbie in APEX but collaborated with ordinary development Oracle (tables, views, packages, triggers, etc) for a number of years.
  
  I ve been assigned in order to respect an existing application to APEX. One task is to add a column to a single character named 'ACTIVE' to a database table and also present on a current project list page. The value can be 'Y' or 'n'. In the view which is the source of data for the project page ad 'Y' turned into 'Yes' and 'n' turned into 'no '. So far so good, everything works well.
  
  There is another page on which it is possible to create new or modify existing projects. This page uses a view as a source of data. On this page, I added a group of radiobutton that contains two options: 'Yes' and 'no '. When I select to edit a project in the project list page the second page is loaded and the correct option, 'yes' or 'No', is marked on the page. This group of radiobutton works exactly like a couple of other groups of radiobutton also represented with a single character column in the database. So far so good!
  
  However, when I try to save the project file by clicking on "Apply Changes" I get this error:
  
  ORA-20001: DML error: p_rowid = 50, ID = p_alt_rowid, p_rowid2 =, p_alt_rowid2 is. ORA-01779: cannot modify a column that is mapped to a table not preserved key
  
  What is the problem here? The new 'ACTIVE' column is added to the view, when I run the view I Don t get all records in duplicate, the underlying table has a column id as the primary key.
  
  Since I Don t know that APEX is under the hood it s hard tp what's wrong. Anyone knows the solution to this problem?
  
  / Magnus

  Hello Magnus,

  Is there an INSTEAD OF trigger defined on the view? Have you added the new column ACTIVE there too?

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• Qosmio X 70-B-10 t - internal error of power after updating the graphics driver

  Hello world

  Ive not long has this laptop and every time I install the AMD Catalyst software on it so I can use the AMD graphics card I get a BCOD telling me error of internal power followed continuous restarts with the same error before system restores a delay before the installation of the driver. This is with Windows 8.1 because I have not upgraded to Windows 10 as of yet.

  I tried to install the latest drivers about 4 times now, but the same thing over and over again. As soon as the installation of system software and restarting the laptop for the changes takes place, the internal power error starts. Someone know how to fix this or should I take the laptop under warranty?

  I know that the fault of power internal but only as part of the Windows 10

  It has already been discussed in this thread
  https://Forum.Toshiba.EU/showthread.php?83849

  The problem was related to the AMD graphics driver and Windows system and this has been resolved by Windows update.
  If you get the BSOD install the AMD, so the current driver disk could not be fully compatible with your system 8.1 Win.

  Also the missing system update may be due this... so make sure your OS 8.1 Win is already up to date and use the reader to AMD released by Toshiba.

• Pavilion G6: Error Code 43 after update Intel HD graphics card

  Hello.

  My laptop HP Pavilion G6 consists of cards 2 graphs: 1-Intel HD Graphics Family

  2 Radeon HD 6470 M

  Today, I opened my device manager, and I tried to update my Intel HD Graphics. Finally, there is an update for it, and after it was done, it displays Intel HD Graphics 3000 This is after I restarted my computer.

  After the reboot, my Intel map updated. However, I have re open Device Manager, and I see that the Radeon HD 6470 M has an exclamation mark above. I opened the properties and I see a message saying: Windows has stopped this device because it has reported issues (Code 43). This has happened after that I updated my Intel card.

  I fixed it with the restoration of the system. But can someone tell me why this happened? The Assistant de Support HP r says there is no update available, Device Manager must therefore determine that the card Intel is up to date.

  Any help? Thank you.

  Try here Intel driver update utility:

  http://www.Intel.com/p/en_US/support/detect?IID=dc_iduu

• Photon: Having an error with WiFi after update

  @mark tested Thoroghly? Care to explain why the wifi worked when the update came down and now he refuses to work? I press the toggle to turn on wifi and I'm greeted by 'mistake' in small letters beneath him.

  Awesome - did you actually make it useless for me down here! B/C the SIM/APN issue was over I was running my data on a device of type mifi down here, and now you've done the phone useless.

  Test? EXPLAIN WHAT IT MEANS?

  I CHECKED - YOU BROKE MY PHONE AND COST ME MONEY AND LEFT ME STRANDED WITHOUT IT ABROAD

  VERY NICE WORK

  and Yes, I have now restarted several times after the "must-have update' you forced on my phone without warning

  I'm beyond mad - my wifi never returned after that

  everyone - be aware that it may hard affect your ability to use wifi

  
  

• Impossible to access Visual Studio and MTM and get errors in IE after updates

  I get a lot of unhandled exceptions after the recent microsoft security updates.

  (1) whenever I open internet Explorer, I get a message that the internet explore has stopped working. I click on debug and it tells me there is that an unhandled win32 exception occurred in iexplorer.exe [6028]. Note: the code [x] continues to change and does not remain @ [6028]. A different code everytime I open. (another pop up im getting is "to help protect your computer, data execution prevention has closed IE.")

  (2) I am able to connect to my TFS via VSTS and MTM. My VPN is connected correctly. I have ping Web sites and they are running.

  Note: I did a restore of the system several times and my computer works very well after the system restore. Once install updates for windows, my computer starts again give me the above questions, then I know it's something to do with the windows updates.

  Any thoughts? These updates are updates of security, so I don't want neglecting them to do a system restore, but all reported these bugs again so a patch can be sent?

  Thanks for the reply Aziz. I ended up remove the internet Explorer and reinstall the inside and the problem disappeared. I appreciate your time and use your troubleshooting techniques so that I will again meet this issue.

• error code 646, after update load down.

  KB981726, KB976321.these update is not installed, because of the error code 646 hmendezlopez

  1. http://www.microsoft.com/downloads/en/results.aspx?freetext=KB981726&displaylang=en&stype=s_basic

  2. http://www.microsoft.com/downloads/en/results.aspx?freetext=KB976321&displaylang=en&stype=s_basic

  Hi there, manually download the updates of the links above and install the same. Save updates to a location on your hard drive, you can find and then install.

  HTH

  TaurArian [MVP] 2005-2010 - Update Services

• Error code 0xc0000034 after update SP2 for Vista

  Hello

  Yesterday I ran my windowsupdates, one of them was SP2. When I rebooted the computer, a black screen appears with the error code ! 0xc0000034! 142/46596 (_000000000000000.cdf_ms)
  I turned off the computer and restarted again. I chose the recovery mode, but no results, the recovery was loop.

  What should I try next?

  Thanx

  Try to do this first, and then restart.
  Then try again.
  You have the disc from your computer's system?
  You may need to reformat.
  I hope you have backup.
  Good luck.

• Checksum error message incorrect A250 aftetr Bios Update on Equium A100

  I received the message 'bad checksum A250' to restart after update Bios on Equium A100 - psaa4e Windows XP home sp3.

  Update 20070709121820 installed BIOS downloaded through this Web site.
  I installed directly from the downloaded file.
  System seems to not operate normally if have I messed up anything?

  Hello

  This message always appears during the clean boot procedure or it appeared only once?

  Generally 'bad checksum' error message if the CMOS battery does not work correctly.

  But I have no idea why you get this message after update BIOS... Anyway if the laptop works correctly after updating the BIOS then you should t be worried.

  See you soon

• Equium A210 - after update BIOS problems connect to MSN Live Messenger

  Hello

  I just installed the latest update of the Bios for my Equium A210, as has been the first time results attempted this \i watched carefully and everything seems to go correctly but the laptop is restarted, it beeps and showed a checksum error, I chose the option to reboot with 'Default settings'

  Since that I got problems to connect to MSN Live Messenger and I wondered if this might be something to do with the Bios Update, it is also possible to 'come back' to the old Bios somehow?

  Thank you
  Lee

  Hello

  your question isn't really a related problem of the machine. The "Checksum Error" is normal after each update BIOS since the checksum of the BIOS which consists the BIOS settings and the version of the BIOS is not correct due to a modified version of BIOS.
  So, the next time that you update your BIOS you will get a "BIOS checksum error" again. Worry not Don t, it s nothing serious.

  With regard to your Messenger:
  1. uninstall the Messenger
  2. download the latest version from the MSN site
  3. install a new
  4. have fun

  Welcomes ;)

• has received the error ORA-44416: invalid ACL, while trying to enable network services

  Hi guys I got the ERROR ORA-44416 after the activation of services network in 11 GR 2 to send emails, so I ran this command found just as shown below in the Oracle document library

  SELECT THE ACL, PRINCIPAL

  OF NACL, XDS_ACE ACE DBA_NETWORK_ACLS

  WHERE HOST = ' *' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL AND

  NACL. ACLID = ACE. ACLID AND

  ARE NOT (SELECT NULL FROM ALL_USERS WHERE USERNAME = MAIN);

  That returned a result of

  no selected line

  What could this mean

  The installation is done on a localhost and the APEX version is 4.2.2 browser is mozilla fire fox

  ORA-44416 means that the ACL that you tried to create to refer to a valid principle - that is, the user does not exist.

  The SQL code that you included above seems to be looking for associated ACL principles which are more database users. I don't see a direct link between this request and the ORA-44416.

  What was your original script of ACL?

  Also, because it is a question of database rather APEX you might get a better answer on the forums of the database.

• application gives an error ORA-20901:

  Hello Hello,
  
  I have problems with one of my application pages, I get the following error
  
  ORA-20901: last update of data column "IMAGE_LAST_UPDATE" datatype "VARCHAR2" used to follow the updates of 'INSTRUCTOR_IMAGE' must be a date data type
  
  Error Impossible to process INSTRUCTOR table row.
  
  
  
  This happens when I try to add a new employee.
  
  I really don't understand what has gone wrong, because everything worked very well. INSTRUCTOR_IMAGE currently has a BLOB data type that contains a photo of an instructor.
  
  I am currently using APEX 3.2.1.
  
  any help will be greatly appreciated

  What is the data type for your image_last_update column? That seems to be the problem - it must be a date for blob support work properly.

  -Sharon

• Get an error SQL Error: ORA-01407:

  Hi all
  
  When iam trying to remove some rows from a table, iam getting the following error:
  
  Error from the 1 in the command line:
  delete from cu_cdm_svc_job_STEP where SVC_JOB_KEY = 292
  Error report:
  SQL error: ORA-01407: cannot update ("FACETS_CUSTOM". "" "" CDM_SVC_JOB_STEP '. "" SVC_JOB_KEY') with the NULL value
  01407 00000 - "can not update (%s) null.
  * Cause:
  * Action:
  
  Kindly help. Thanks in advance.

  Hello and welcome!

  You have foreign keys hanging out, doing so ON DELETE SET NULL?