Error code 0xc0000034 after update SP2 for Vista

Similar Questions

• Error code 8024200d when installing SP2 for Vista Home Premium (32 bit)

  I use Vista Home Premium (32 bit).  When Windows Update recently
  tried to install SP2 (several times), the quoted error message
  repeatedly prevented installation.  Google showed a number of similar
  references to the problems associated with SP1 (from one year or if there are and less).  Is
  There is a work around for this message because it applies to SP2?

  Biggar Gordon
  Houston, Texas

  Hi Colonel biggs,

  Welcome to the Forums Microsoft Vista

  This problem may occur if one of the following conditions is true:

  · A program on your computer interfered with the installation of the service pack.

  · There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

  To resolve this problem, try each resolution in the 'General resolution"and the"Advanced Troubleshooting"section in the order in which they are presented. After trying a resolution, try to install the service pack again. If you can't always install the service pack, try the next resolution.

  Resolution 1: Install the stand-alone package for the service pack instead of using Windows Update to install the Service Pack

  Note If you have already tried to install the stand-alone package for the service pack and you have encountered this problem, skip this resolution and go to resolution 2.

  If you don't know if you've tried to install the stand-alone package for the service pack, it is recommended that you try the following steps to install the stand-alone package for the service pack. By using the stand-alone package to install the service pack, you eliminate installation issues that may be related to Windows Update. This simplifies the troubleshooting process

  Solution 2: Run the system update readiness tool

  System Update tool checks your computer and trying to resolve certain conditions that can interfere with the installation of the updates or other software. However, before you download the tool, you must determine whether your computer is running a 32-bit version or a 64 bit version of the Windows Vista operating system. If your computer is Windows Vista installed, and you know which version you are using, go to the section "how to download the system update readiness tool. If you are unsure which version your computer has installed, follow these steps:

  1. click on Start

  2. collapse this includes it in the Search box, type System, and then click System in the programs list.

  The operating system is displayed as follows:

  · For a 32 - bit version operating system, 32-bit operating system appears for the system type under System.

  · For a 64 - bit version operating system, 64-bit operating system appears for the system type under System.

  After you determine which version of Windows Vista, your computer is running, download system update readiness tool.

  Resolution 3: Close or disable any applications that may be running, restart the computer and then install the service pack

  1. Close all applications and restart your computer.
  2. Once your computer has restarted, disable any antivirus or any antispyware application that can load during the startup process. You can normally disable the notification area application. This area is located in the bottom right corner of the computer screen. To disable an application in the notification area, follow these steps:
  1. 1. Right-click the icon of the third-party program.
     2. Click Close, disable, outputor an equivalent term in the list of options. If these options are not available, you may open the application and then close or disable in the application.
  2. As soon as you close the antivirus or the antispyware software, try to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site:

  http://www.Microsoft.com/downloads (http://www.microsoft.com/downloads)

  1. After completing the installation of the service pack, enable the antivirus or the antispyware software that you disabled in the previous steps.

  For more information follow the link below:

  http://support.Microsoft.com/kb/947366

  Hope this information is useful.

  Suresh G
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After installing SP2 for Vista, everything that I try to print from this computer prints in poster format.

  After installing SP2 for Vista, everything that I try to print from this computer prints in format post little matter what I tell the printer to do.  I use a laptop Acer Aspire 9410, 32-bit, Windows Vista, IE 8.  Commands from another computer on the printer work properly.  Should I uninstall SP 2 & reinstall?  Or what is the best fix for the problem?  Thank you.

  shagen18,
  You need to uninstall the printer and make sure you have the latest drivers from the manufacturer of the printer and then reinstall the pritner.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Laptop crashes after loading SP2 for Vista - stuck at 0%

  I downloaded the SP2 for Vista and now my phone is blocked 3 of 3 update after reboot. It is stuck at 0% complete. How to spend it?

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Error code 80072EE2 - Windows update searches for proxy while the Internet is directly (64-bit windows 7)

  Windows Update error code 80072EE2. Update Windows Journal shows he's looking for a proxy in spite that the intenet access is direct. How can I find out Windows Update that I don't use any proxy? Proxycfg would probably help, but there are more with Windows 7.

  Thanks to anyone who can help!

  French Old Timer,
  In addition to the information requested by PA Bear, take a look at this article and let us know if it helps.

  You may encounter temporary connection related errors

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ERROR CODE 643 AFTER TRYING TO INSTALL VISTA UPDATE.

  I need to install several times, getting error code 643

  http://support.Microsoft.com/kb/923100/

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".

  If the above does not solve your problem:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Error code 61499 after update license (FPGA)

  Hello

  I am a fairly experienced user of FPGA module.  I have LabVIEW 2009 installed (version 9.0.0) including the FPGA on XP 32-bit module.  Everything worked well and I had a project specific FPGA that had been built and run in the last month or so.

  In the meantime, the license has expired, so I had to update the license.  After update of the license, I made a trivial change in VI (default values has changed some entries to the front) and tried to compile and run.

  This has generated the error-61499, with additional information:

  Error starting compile step: make sure that a compatible version of Xilinx tools is installed in the location specified in the Setup from LabVIEW.

  I looked after error-61499 in LabVIEW FPGA and a few other positions.  I checked the path of compilation of LabVIEW FPGA registry keys and it seems fine (C:\NIFPGA2009\Xilinx\ISE).  This directory exists and is the right size (3.74 GB).  A temporary directory is created in C:\NIFPGA2009\srvrTmp\localhost.  I searched the pearl58.dll file but couldn't find it.

  When I look at the license installed recently and the license has expired in the License Manager NOR, I see no difference between the two other than the expiration date.

  Summary: I had a working facility and the project, updated the license file and now get error-61499.

  ???

  With the help of an Application engineer, I tried two things.

  First of all, I tried to 'fix' the FPGA Module through the "Add or remove programs" utility in Control Panel.  That had no effect.

  Then, I downloaded and installed NOR-RIO 3.3.0 of the support zone, drivers and updates.  That solved the problem!

  So, for someone who has a similar problem in the future, try to reinstall the driver OR RIO.

• Error codes with two updates to Windows Vista.

  The first update will fail poster KB929777 error code and when you right click the update, it displays error detail code 8000FFFF. The second update fails poster KB975929 error code and when you right click on the update it shows the detail 80242006 error code. I tried Mr. Fixit for these codes and it says that it failed. I tried manually and it has not yet. I have a 32-bit system with 4 GB of Ram. The system is a Dell XPS M1530. I had to reformat my hard drive today and these are the only two updates that failed to run.

  Error 8000FFFF when you download updates using Windows Update or Microsoft Update:

  http://support.Microsoft.com/kb/946414

  0 x 80242006 SUS_E_UH_INVALIDMETADATA the caller passed an invalid metadata update manager

  I * think * that means a file system cannot be found by the component maintenance base [CBS]. We can watch the cbs.log newspaper in WINDOWS\logs\CBS, and * hopefully *, know what file system is the culprit.

  Be aware that this newspaper can be very large.

  Start at the * bottom * journal cbs.log and do a find for the error.

  When the log will open in Notepad, scroll all the way down, click on edit, find

  Enter the error in find it what: line

  Under Direction: Put a check mark next to the top

  Then click Search

  This is an error from a cbs.log which shows the Windows Calendar as the 'not found ': file

  2007-09-05 03:16:55, error CSI

  00000148@2007/9/4:17:16:55.326 (F) CMIADAPTER: failed. HRESULT =

  HRESULT_FROM_WIN32 (ERROR_FILE_NOT_FOUND)

  Element:

  [94].

  "name ="WindowsCalendarTasksACL"/ >".

  [gle = 0 x 80004005]

  2007-09-05 03:16:55, error CSI

  00000149@2007/9/4:17:16:55.326 (F) CMIADAPTER: output with HRESULT code

  = (ERROR_FILE_NOT_FOUND) HRESULT_FROM_WIN32.

  [gle = 0 x 80004005]

  The file was actually on the system, BUT its scheduled tasks folder had been deleted. The 'package' could not find that file and the installation would fail.

  The post returns with the section of the cbs.log that contains the xml entry, as the section above:

  > Element:

  > [94]""

  Come back later, however. I'm sure someone who knows much more I do on this will be passing through any time now.

• Get the error code 0x8007F0F4 to update security for Windows XP (KB2481109). OS is XP version 2002 SP3

  Have got this code failure twice with automatic updates and got the same error code when I did an update of the manual. Anyone know the reason for this error code for this security update?

  Hello
  You can try the steps in the following article and check if it works:
  You may receive a "0x8007F0F4" error code when you try to install the updates on the Windows Update Web site or from Microsoft
  http://support.Microsoft.com/kb/958051
   
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows
  Let us know if it helps!

• Can't windows after installing SP2 for Vista

  I reinstalled my 32 bit Vista OS and all updates this weekend and it worked fine.  Tonight there was an available SP2 and I downloaded and installed.  The computer has been rebooted and never started.  At one point he showed a line of registry and was hanging there with him showing.  I do not write it down, but shut down the computer.  I tried a recovery disc that I had done, but it does not work.  How can I go back to windows.  I even tried to go into safe mode but who do not have me to Windows.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• error code 646, after update load down.

  KB981726, KB976321.these update is not installed, because of the error code 646 hmendezlopez

  1. http://www.microsoft.com/downloads/en/results.aspx?freetext=KB981726&displaylang=en&stype=s_basic

  2. http://www.microsoft.com/downloads/en/results.aspx?freetext=KB976321&displaylang=en&stype=s_basic

  Hi there, manually download the updates of the links above and install the same. Save updates to a location on your hard drive, you can find and then install.

  HTH

  TaurArian [MVP] 2005-2010 - Update Services

• Pavilion G6: Error Code 43 after update Intel HD graphics card

  Hello.

  My laptop HP Pavilion G6 consists of cards 2 graphs: 1-Intel HD Graphics Family

  2 Radeon HD 6470 M

  Today, I opened my device manager, and I tried to update my Intel HD Graphics. Finally, there is an update for it, and after it was done, it displays Intel HD Graphics 3000 This is after I restarted my computer.

  After the reboot, my Intel map updated. However, I have re open Device Manager, and I see that the Radeon HD 6470 M has an exclamation mark above. I opened the properties and I see a message saying: Windows has stopped this device because it has reported issues (Code 43). This has happened after that I updated my Intel card.

  I fixed it with the restoration of the system. But can someone tell me why this happened? The Assistant de Support HP r says there is no update available, Device Manager must therefore determine that the card Intel is up to date.

  Any help? Thank you.

  Try here Intel driver update utility:

  http://www.Intel.com/p/en_US/support/detect?IID=dc_iduu

• What does the error code 80080005 when update of Windows Vista?

  Just installed a new hard drive and the need to run the Windows Vista update, but the error message above is displayed. I did a complete analysis of the Virus and no known viruses have been detected.

  0 X 80080005 CO_E_SERVER_EXEC_FAILURE
  BITS service could not be started

  First of all, make sure that no proxy server is causing this issue.
  Click on the round to start, in the search field type cmd
  Right click on cmd.exe and select "Run as Administrator". Accept the UAC prompt.

  At the prompt, enter the following command exactly as written including spaces and press enter

  netsh winhttp see power of Attorney

  If this message appears, type exit, and then press enter

  Direct access

  If a proxy is listed, then type the following and press enter

  netsh winhttp reset proxy

  Then type in the output, press ENTER to close the command prompt.
  See if the system can update now.

  UTC/GMT is 18:28 Thursday, September 6, 2012

  Jose Antonio Ponton Posada CEO

• Important updates for Vista SP2 Security Installation failure: update MSXML 4.0 SP2 (KB927978) AND (KB954430) security, citing error Code 652, Windows Update encountered an unknown error!

  Has no significant updates for VISTA SP2 security installation: MSXML 4.0 SP2 (KB927978) security AND (KB954430), citing error Code 652, Windows Update encountered an unknown error! How is it Windows Update does not recognize it's own mistakes? I tried several times to install both of these important updates without success. Please help me so that I can install these two updates & get back on the right track. Thank you!

  See the section "How to get help", for example, http://support.microsoft.com/kb/927978

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.