WebService with several operations

Similar Questions

• Several operations to a WSDL or several WSDL

  I need to expose some services of the OSB, (service1Request, service1Response, service2Request, service2Response...), these services are all them should be sent to the same service provider. What is the best solution: create a WSDL for each service or 1 WSDL for all services with several operations? Thank you

  It depends on the Composition of Service strategy you follow, that generally group you a set of operations in a Service.
  I've seen different organizations taking both approaches, i.e.

  1. have a WSDL by operation

  Benefits: More flexible with regard to changes to any operation. You can only change the affected WSDL and make sure that the rest of them are intact.
  Disadvantages: If the number of operations to continue its growth, many WSDL file management will be an overhead projector

  2. several operations as part of a WSDL.

  Benefits: More flexible regarding now the WSDL files and versions of service (like AccountV1.wsdl, count V2.wsdl...) and more alignment to your SOA my point of view
  Disadvantages: If an operation of the WSDL changes then the rest of the operations are (maybe not a features point of view, but the consumption of the new WSDL file) also affected as a new wsdl should be created.

  When you think of SOA, you always talk about Services and not the operations, so finally a given operation should logically belong to a Service and all of the artifacts of the Service to be stored in one place, needs whether a design, WSDL, Code, unit tests, etc...

  An example of such a service is as follows:
  Account services with operations such as Add, Mod, Inq, etc...

  So based on the strategy you want to use, consider the above and make a decision.

  I hope this helps.

  Thank you
  Patrick

• Problem with several sub-groups through case structure Enum: 'the VI isn't in a State compatible with this operation.

  Hello

  I'm using LabVIEW 8.0 and I'm trying to create a subgroup of experts which shows the façade of a subvi according to the choice made by the user via the menu drop down Enum.  I wired the Enum to a case structure and apply a coding identical to each structure of individual cases with the exception of course change the source of sub - vi.  However, you receive an error "The VI isn't in a State compatible with this operation."  I have managed to make a single sub - vi work within a subgroup of experts using a true/false case structure and the same exact coding.  However, now that I use an Enum box connected to a structure of the case, I get this error.  I enclose my diagram as well.  Could someone help me as to where it is that I am wrong?

  Thanks in advance!

  If your VI runs already, when you try to run it? Which returns the error you get.

  Check the State of VI before trying to run or make an error handling.

• Why the books are grouped and preinstalled with the operating system?

  It's complaints

  My Portege has Windwosw Vista. I didn't want to buy Vista, but they were only selling with him and no other choice was possible to purchase.

  First of all, my laptop had problems to install Windows updates. I could not connect my institution's Internet System. I had to reinstall the system again.
  It's a waste of time!

  After re-installation of the button for the sound on the outside Panel does not work correctly.

  Also, when I try to stop the laptop sometimes it restarts itself - he doesn't stop!

  Secondly, I had a problem with the laptop, when an opportunity to visit a well-known site, it serves to block itself.
  Once, when he is blocked, I had to restart and its screen remained black. They took for repair. It was delivered later - repaired, but with a defect on the screen!
  What a... workers!

  When I bought this laptop he had an offer with the update of Vista with Windows 7 after their release.
  Wonderful. But just note, Toshiba has the highest price of the offer, compared to its competitors - 30 (or £) against 15 for others, which of course I'm not going to pay.

  I already paid for Vista, which is incredible, and I knew, but I had not choice not to buy!

  All right, so there is still competition in the market, several possibilities are present - install Windows cracked, switch to Linux or just buy an Apple!

  Please, take this comment seriously! And please, stop with group buying, no matter what the benefit is. It won't work for long.

  Hi mate

  Fact is that most of the laptop manufacturers sell the computer and laptop computer with a preinstalled operating system. So I wouldn't blame Toshiba or other brands for which

  You get a new computer/laptop with a new OS.
  During the past 20 years, Microsoft released 3.0 Win, Win 95, Win 98, Win NT, W2k, Win XP, Win ME, Vista and Win 7, I remember that all my computers or laptops were grouped with these operating systems

  Toshiba offers the notebook with a clean image and you can also create a recovery disk (so don t need to buy anything if you need t n)
  Of course, each of us can install a clean OS, but there are a lot of people who are happy with such image pre-installed because everything is pre-installed and configured.

  Many people have no knowledge of computer wide and are really recognizing that everything is pre-installed and the configuration does not have a lot of time

  With regard to the question of the laptop;
  What to say; you had a bad luck that something was wrong with the laptop. This can still happen that my new LCD TV other manufacturer, was dead after two weeks, I called ASP, then replaced the screen now is ok

• Windows 8 can work with multiple operating systems

  Can I use windows 8 with several OS like windows7 & windows xp etc.

  Hello Aslam Dasadia,

  If you are referring to double or triple boot, i.e., starting from Windows XP, Windows 7 and Windows 8 on the same PC and the drive, then the answer is Yes.

  Please keep in mind that Windows XP must be installed first. This is because Windows XP uses a different bootloader of Windows 7 and Windows 8. A good way to install is in order, for example, Windows XP first, followed by Windows 7 and Windows 8.

  An alternative is to use the Hyper V virtual machine software (provided with Windows 8 Pro and Enterprise of Windows 8) to create virtual machines of all operating systems. Personally, I use VMware Workstation (not free I'm afraid). VMware Workstation I running Windows XP, Windows Vista and Windows 7 with Windows 8 as the host and the other as guest operating systems.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Several operating systems Vista and Win 7 run built in missing bluetooh

  My Bluetooth 2.0 + EDR on Acer Aspire 6920 G installation could not be detected so unable to installed correct driver after that I installed my Windows 7 as my 2nd several operating systems with the original Vista SP2.

  Only the Vista Panel showing always available Bluetooth Panel but icon indicates avail point O. The two managers of device on two BONES indicate unavailability of Bluetooth. What should I do like light blue to the Bluetooth Panel on while the startup process is on the two BONES. I need to have Bluetooth that I intend to install and configure the ACER Xpress VoIP phone.

  Never been resolved with similar problem and what should be done while several operating systems are maintained are successful in all cases.

  Hello

   
  Do you have a code error message when you try to install Bluetooth drivers?
   
  If the Bluetooth feature is built into your computer, try to turn the Bluetooth switch and turn it back on. (This switch cannot be tagged "Bluetooth", it can be combined with a switch that turns your wireless on and outside network receiver also).
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  Check if the Bluetooth services are running on the operating system.
  a. Click Start, type services.msc and press to enter.
  b. in the list of components, double-click Bluetooth support Service.
  c. change the startup type to automatic and click on the Start button to start the service.
  d. click on apply and then click ok.
  e. check if the problem persists.
   
  Method 2:
  Install Bluetooth drivers on the operating system on the manufacturer's Web site.
  Reference:
  http://us.Acer.com/AC/en/us/content/drivers
   
  Method 3:
  Since Windows Vista, follow the link and run the fixit.
  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices
   
  For Windows 7, see the link:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Also check out these links for more information:
   
  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions
   
  Change settings for a Bluetooth compatible device
  http://Windows.Microsoft.com/en-in/Windows7/change-settings-for-a-Bluetooth-enabled-device
   
  Connect to Bluetooth and other wireless or network devices
  http://Windows.Microsoft.com/en-in/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices
   
  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-in/Windows-Vista/set-up-a-Bluetooth-enabled-device
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Installation with several NetAPP SRA spinning FAS30XX

  We tested SRM successfully between FAS3050 and FAS3070. Now, we are in the second phase and test the scenario where our VM is distributed between several volume and multiple files (all NetApp FAS30XX) server. My question is how can I configure a replication with several spinning to a file server? Because when configure us SRA adapter we provide source IP which is protected site spin, then IP who resumed recovery site go and then we're able to see replicated table. But in the situation where you have several sources how can SRA will be set?

  Thanks for your response

  When you set up picture frames, you can specify more than one table, then you could add essentially several bays that are replicated volumes in a different destination file server and if reporters are operational in a metro cluster or a cluster, you must the failover in case a file server.

  I hope this helps.

• Shortcut for the new window with several tabs

  Is it possible to have a shortcut on the desktop to launch a new window with several tabs? For example - home page is set to "www.google.com", but the shortcut opens new window with tabs "www.cnn.com" and "www.youtube.com".

  Then far,.../firefox.exe-nouveau-fenetre followed by the two URL in quotes will open two new windows. Entry - new-window "www.cnn.com" - new-tab 'www.youtube.com' will open two new windows if no instance of firefox is open, but if another window is already open, youtube will add a tab to the already open window, rather than the new window with cnn.com

  In reply to myself... withdrawal-order new window (and-new-tab), now it works.

  Looks like I'm too complicated it.

  shortened final was "C:\Program Files (x 86) \Mozilla ' 'url1'"url2.

• I use a Mac 10.5.8 and your software says it must be compatible with 10.5, but he says it's not compatible with my operating system. Why?

  I use a Mac 10.5.8 and your software says it must be compatible with 10.5, but he says it's not compatible with my operating system. Why?

  10.5.8 it is compatible with firefox only with Intel see 10.0:

  http://www.Mozilla.org/en-us/Firefox/10.0/system-requirements/

  for your ppc mac, the most recent is the version that you have 3.6.26 see:

  http://www.Mozilla.org/en-us/Firefox/3.6/system-requirements/

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• Functions defined by the user with several parameters

  I set features three following user using "Define."

  UF1 takes a single patameter;

  UF2 takes two parameters;

  and UFX takes two parameters - with the second is 'X' in the definition.

  

  Œuvres F1.  F2 is the EVAL of F1 version and it works too.  User functions only seem to work fine.

  F3, a function of two user settings, produces a graph of NaN.

  F4 is the EVAL of F3 version.  Note that 'B 'is not replaced by 1'.  Also produces a NaN chart.

  F5 produces a graph of NaN.

  F6 is EVAL of F5.  The 'X' is not replaced (even with the ' B' above), and even if it looks like 'X * X', it also produces a graph of NaN.

  

  Is it possible to get defined by the user, with several parameters, features work by tracing the curve?

  Hi!, Fortin:

  If you download and install the ultimate Firmware with the version of the software: 2015 6 17 (8151), with the number of Version: 1.1.2 - 11, you can trace your examples of definition of the function, with curves and values, without NaN.

• Background with several pictures

  How can I create a wallpaper for my iPad, iPhone, MacBook Air with multiple photos?

  (El Capitan, iOS 9.2.1 Photos)

  To create a collage of photos, you can create a photo book project and select a template page with several photos. Fill it with photos of your choice and print the page in PDF format.

  The themes of the book are different according to the terms of the photos and the number of photos per page.

  It's the theme travel plans:

  

  If you have installed iWork apps try Keynote to create a slide with many photos, arranged freely.

• El Capitan 10.11.3 is compatible with my operating system? a MacBook Pro (15 inch, late 2011), 2.4 GHz Intel Core i7, 4 GB DDR3 memory at 1333 MHz

  El Capitan 10.11.3 is compatible with my operating system? a MacBook Pro (15 inch, late 2011), 2.4 GHz Intel Core i7, 4 GB DDR3 memory at 1333 MHz

  Yes.

  El Capitan system requirements

  https://support.Apple.com/kb/SP728?locale=en_US

  Check the compatibility of the application

  http://roaringapps.com/apps

  How to upgrade?

  http://www.Apple.com/OSX/how-to-upgrade/

  Note:

  Computer backup before the upgrade.

  El Capitan works better with 8 GB of RAM installed.

• WiFi HP ENVY 4500 with several Access Points - same SSIS Configuration

  Hello

  We just got a HP ENVY 4500.  I have a main homenetwork with a wifi Modem/Router and an old router acting as an Access Point to the floor to extend coverage.

  Both have the same SSID and password and are set to different channels.

  My HP ENVY 4500 fails to connect when the Access Point is lit.

  It will connect with it.

  Once connected, I can turn on the PA and all is well.

  The two router an AP using WPA-PSK/WPA2-PSK encriptación

  The router (that it connects to) should have a better sgnal when both are on, so I do not understand why they need the AP to be turned off to connect.

  Any thoughts people?

  Eserim

  I think he has always had problems with several access points.  Try this, what ever AP is closest to the printer, set it to channel 1.  Then try channel 11.  Try now.

• Carpet * a DVD-Ram UJ - 841S comes with several error messages

  My laptop is relatively new, I've been burning some video files in DVD - RW and all of a sudden my DVD drive has stopped working. It came with several error messages format "failed due to damage media", "format failed due to general failure" and "the inserted disc is READ only".

  I also can't rip music discs.

  Can you see ODD listed in Device Manager, and if so what is the exact status it?

  Sorry, but we discus on ODD, but nobody knows what model of laptop you have and what is the history of this problem. Is replaced the drive? Why are you sure that you are using compatible with your laptop ODD.

  Please more information!

• Interfacing with several unknown USB devices; all producing NMEA strings

  Hi all

  Question about the peripheral USB interface and their associated drivers.

  I have the obligation to build an application that interacts with the USB devices that produce NMEA strings. I have the library to parse NMEA strings, but I fight with interfacing with several unknown USB devices. When deploying applications, I know not all possible USB devices to use.

  Is it possible to produce one driver who will accept any USB device strings?

  Or, more likely, is there a way to get the LV to recognize a connected USB device and automatically find / install the driver like windows does and is it possible to do in a deployed application?

  I had a trawl of the forums, but I've not found anything that specific.

  Thanks, I really appreciate the help.

  About the VI "set up the serial port", my problem is that the choice of COM port is in a separate menu (not directly related to the VI) and it allows all possible COM ports to be selected. That can be addressed.

  I am not expecting an all-in-one solution but asked the question in case it was possible.

  What I realized, is that for my specific condition to read strings from a USB device. It is likely to be sent over a serial connection. LV can handle this well and easily assuming the device has the installed driver / settings are available.

  LV (and indeed any other program) will not work without a device driver / settings. In this case, parameters set must be found (error) / a USB RAW driver would need to be developed. Devices requirng a RAW USB driver would need a serious review to continue due to the time and effort required. All this effort is work inherited from the AIDS to navigation

  I appreciate any help and I think I got the answer I was looking for! Thank you very much