Installation with several NetAPP SRA spinning FAS30XX

Similar Questions

• RS 5 with netapp SRA, FCOE site iSCSI with RDM

  Hi team, could someone please help to veify if it works in this scenario.

  We have PROD site running vmware vcenter 5.0, esxi5.0, SRM 5.0, Netapp 3210 ONTAP8.1 version file server. The VMs are windows Server2008, MS SQL2008 as major DB. Virtual RDM database files. Only FCOE for this site. AD is a physical Server 2003. The rest are virtual machines

  We offer you to have SRM for DR site deployment. The DR site is synchronized with netapp SRA snapmirrror, controlled by the console SRM5.0. Recovery site has no FCOE, only iSCSI and NFS license availble. Always RDM but using iScsi. vCenter 5.0, 5.0, netapp ONTAP8.1 2040 esxi.

  My questions are:

  1. If VMware SRM support DR failover for this case with the different protocol, PROD is FCoE, iscsi DR

  2. If the SRM supports failover with RDM in our case

  3. If the AD DR Server site need to be installed as a new best practices, or we will have to use SRM to switch production announced on website of Dr. What is recommended.

  4. If the physical AD can be kept as the common way and always taken SRM supported

  5. to the recovery site, which is the best practice? To use NFS to store data and iSCSI for iscsi? Or store data and RDM using iSCSI LUNS to simplify?

  
  

  Thank you!
  

  1. Yes
  2. Yes
  3. I would recommend if possible having a domain controller AD, already running on the DR site - it may be a virtual machine
  4. Yes, the PROD site domain controller can be physical
  5. I'd keep all compatible iSCSI so so -.

• NEW MRS. 5.1 with NETAPP SRA 2.0.1 get the error allowing matched table.

  I tried to install VMWare SRM 5.1 with netapp 8.1.2 with netapp SRA 2.0.1 Simulator.

  I created two sites and synchronous sites and installed MRS. After that added two sites and tables. The sra has successfully added to these two sites. But when I tried to allow the tables associated with, I am getting error on the DR sra as follows.

  SRA command 'discoverDevices' failed. SAN or NAS device not found

  Make sure that the SAN device is configured and mapped to a Group of ostype vmware and NAS device is configured and exported with the rules of the rw.

  I have check the logfile DR sra, it list due to error.

  30 12-2012 T 01: 03:24 replication storage NetApp FAS/V-Series adapter Version 2.0.1.0 Build Date 26/06/2012
  -> 30-12-2012T 01: 03:24 discover the devices began
  -> 30-12-2012T 01: 03:24 1
  -> 30-12-2012T 01: 03:24 list of exclusion: vol0
  ->
  ->
  -> 30-12-2012T 01: IP 03:24 for hostname:PR - NETAPP is 192.168.10.100
  -> 30-12-2012T 01: 03:35 collection world wide node name
  -> 30-12-2012T 01: 03:35 collection list of iscsi ports
  -> 30-12-2012T 01: 03:35 collection fcp port
  -> 30-12-2012T 01: 03:35 IP address of collection storage
  -> 30-12-2012T 01: 03:35 Group information collection
  -> 30-12-2012T 01: 03:35 Group IG-IS-D has iqn.1998 - 01.com.vmware:dr - esxi-5b82185b and type ISCSI initiator
  -> 30-12-2012T 01: 03:35 collection list LUNS replicated
  -> 30-12-2012T 01: 03:36 vol1/flight/vol1/ESX-PR-LUN provided audit
  -> 30-12-2012T 01: 03:36 including/flight/vol1/ESX-PR-LUN after checking the opaque filters
  -> 30-12-2012T 01: 03:36 validate whether/flight/vol1/ESX-PR-LUN path is valid in the opposite direction of device to give peerArrayId
  -> 30-12-2012T 01: 03:36 could not discover any LUN mapped to the ostype vmware Group and replicated
  -> 30-12-2012T 01: 03:36 collection list replicated exports
  -> 30-12-2012T 01: 03:36 validate if vol1 path is valid in the opposite direction of device to give peerArrayId
  -> 30-12-2012T 01: 03:36 could not discover any replicated export
  -> 30-12-2012T 01: 03:36 no devices found
  -> 30-12-2012T 01: 03:36 discover the devices completed with errors
  2012 12-30 T 01: 03:36.872 + 03:00 [04604 opID wordy of "SraCommand" = A3306132 - 000005 A 2] Stopped listening to updates of file 'C:\Windows\TEMP\vmware-SYSTEM\sra-status-75-107 '.
  2012 12-30 T 01: 03:36.872 + 03:00 [04604 opID wordy of "SraCommand" = A3306132 - 000005 A 2] quashing SRA command timeout
  2012 12-30 T 01: 03:36.872 + 03:00 [04604 info 'SraCommand' opID = A3306132 - 000005 A 2] discoverDevices came out with exit code 0
  2012 12-30 T 01: 03:36.872 + 03:00 [04604 opID wordy of "SraCommand" = A3306132 - 000005 A 2] discoverDevices responded with:
  --> <? XML version = "1.0" encoding = "UTF-8"? >
  "--> < response xmlns ="http://www.vmware.com/srm/sra/v2">."
  --> < error code = "1014" / >
  --> < / answer >

  Please find attached files for newspapers of sra and netapp configuration

  Hello

  You must map the LUNs replicated with DR site with read-only mode.

  Concerning

  Mohammed

• ASA EzVPN with several remote subnets

  Hello world

  I'll have the challenge of EasyVPN installation based on ASA 5520, and ASA 5505 (with the ASA5505 as the vpnclient) with several networks behind the ASA 5505.

  Access by the network directly connected on the 5505 to the central site works very well.

  But the second network segment (which is behind a router on the directly connected network) cannot connect to the central site.

  I guess I need to specify that some sort of acl's to be able to do that.

  BTW we do not use tunneling split, because all traffic moves through the tunnel (no local internet access).

  The layout looks like this

  (--LAN--)-5520---5505-(--LAN1--)-ROUTER-(--LAN2--)-(WAN)-

  LAN1 and LAN connection works great through the EZVPN Tunnel.

  LAN2 connection to the LAN does not work through the Tunnel of EZVPN.

  Here is the configuration used so far (outside the normal SHEEP, groups of objects and stuff ISAKMP crypto):

  Client:

  vpnclient Server 10.x.x.x

  extension-mode network mode vpnclient

  EzVPN vpngroup vpnclient password *.

  vpnclient username user1 password *.

  vpnclient enable

  Crypto ipsec df - bit clear-df outdoors

  Server:

  internal EzVPN group strategy

  Group Policy attributes EzVPN

  allow to NEM

  allow password-storage

  tunnel-group EzVPN type ipsec-ra

  General characteristics of tunnel-group EzVPN

  Group Policy - by default-EzVPN

  IPSec-attributes tunnel-group EzVPN

  pre-shared key *.

  user user1 password *.

  I hope you can help

  Best regards

  Jarle

  Unfortunately, it is not supported on the platform of the SAA. With EasyVPN on the SAA, only the connected networks can be advertised. To accomplish what you want to do, you need to configure a static IPSec tunnel and announce local networks via ACL interesting traffic. You can also use an IOS device that does not have the capabilities of "multiple subnet" with EasyVPN.

  http://www.Cisco.com/en/us/docs/iOS/sec_secure_connectivity/configuration/guide/sec_easy_vpn_rem.html#wp1098057

• Shortcut for the new window with several tabs

  Is it possible to have a shortcut on the desktop to launch a new window with several tabs? For example - home page is set to "www.google.com", but the shortcut opens new window with tabs "www.cnn.com" and "www.youtube.com".

  Then far,.../firefox.exe-nouveau-fenetre followed by the two URL in quotes will open two new windows. Entry - new-window "www.cnn.com" - new-tab 'www.youtube.com' will open two new windows if no instance of firefox is open, but if another window is already open, youtube will add a tab to the already open window, rather than the new window with cnn.com

  In reply to myself... withdrawal-order new window (and-new-tab), now it works.

  Looks like I'm too complicated it.

  shortened final was "C:\Program Files (x 86) \Mozilla ' 'url1'"url2.

• Functions defined by the user with several parameters

  I set features three following user using "Define."

  UF1 takes a single patameter;

  UF2 takes two parameters;

  and UFX takes two parameters - with the second is 'X' in the definition.

  

  Œuvres F1.  F2 is the EVAL of F1 version and it works too.  User functions only seem to work fine.

  F3, a function of two user settings, produces a graph of NaN.

  F4 is the EVAL of F3 version.  Note that 'B 'is not replaced by 1'.  Also produces a NaN chart.

  F5 produces a graph of NaN.

  F6 is EVAL of F5.  The 'X' is not replaced (even with the ' B' above), and even if it looks like 'X * X', it also produces a graph of NaN.

  

  Is it possible to get defined by the user, with several parameters, features work by tracing the curve?

  Hi!, Fortin:

  If you download and install the ultimate Firmware with the version of the software: 2015 6 17 (8151), with the number of Version: 1.1.2 - 11, you can trace your examples of definition of the function, with curves and values, without NaN.

• Background with several pictures

  How can I create a wallpaper for my iPad, iPhone, MacBook Air with multiple photos?

  (El Capitan, iOS 9.2.1 Photos)

  To create a collage of photos, you can create a photo book project and select a template page with several photos. Fill it with photos of your choice and print the page in PDF format.

  The themes of the book are different according to the terms of the photos and the number of photos per page.

  It's the theme travel plans:

  

  If you have installed iWork apps try Keynote to create a slide with many photos, arranged freely.

• WiFi HP ENVY 4500 with several Access Points - same SSIS Configuration

  Hello

  We just got a HP ENVY 4500.  I have a main homenetwork with a wifi Modem/Router and an old router acting as an Access Point to the floor to extend coverage.

  Both have the same SSID and password and are set to different channels.

  My HP ENVY 4500 fails to connect when the Access Point is lit.

  It will connect with it.

  Once connected, I can turn on the PA and all is well.

  The two router an AP using WPA-PSK/WPA2-PSK encriptación

  The router (that it connects to) should have a better sgnal when both are on, so I do not understand why they need the AP to be turned off to connect.

  Any thoughts people?

  Eserim

  I think he has always had problems with several access points.  Try this, what ever AP is closest to the printer, set it to channel 1.  Then try channel 11.  Try now.

• Carpet * a DVD-Ram UJ - 841S comes with several error messages

  My laptop is relatively new, I've been burning some video files in DVD - RW and all of a sudden my DVD drive has stopped working. It came with several error messages format "failed due to damage media", "format failed due to general failure" and "the inserted disc is READ only".

  I also can't rip music discs.

  Can you see ODD listed in Device Manager, and if so what is the exact status it?

  Sorry, but we discus on ODD, but nobody knows what model of laptop you have and what is the history of this problem. Is replaced the drive? Why are you sure that you are using compatible with your laptop ODD.

  Please more information!

• Interfacing with several unknown USB devices; all producing NMEA strings

  Hi all

  Question about the peripheral USB interface and their associated drivers.

  I have the obligation to build an application that interacts with the USB devices that produce NMEA strings. I have the library to parse NMEA strings, but I fight with interfacing with several unknown USB devices. When deploying applications, I know not all possible USB devices to use.

  Is it possible to produce one driver who will accept any USB device strings?

  Or, more likely, is there a way to get the LV to recognize a connected USB device and automatically find / install the driver like windows does and is it possible to do in a deployed application?

  I had a trawl of the forums, but I've not found anything that specific.

  Thanks, I really appreciate the help.

  About the VI "set up the serial port", my problem is that the choice of COM port is in a separate menu (not directly related to the VI) and it allows all possible COM ports to be selected. That can be addressed.

  I am not expecting an all-in-one solution but asked the question in case it was possible.

  What I realized, is that for my specific condition to read strings from a USB device. It is likely to be sent over a serial connection. LV can handle this well and easily assuming the device has the installed driver / settings are available.

  LV (and indeed any other program) will not work without a device driver / settings. In this case, parameters set must be found (error) / a USB RAW driver would need to be developed. Devices requirng a RAW USB driver would need a serious review to continue due to the time and effort required. All this effort is work inherited from the AIDS to navigation

  I appreciate any help and I think I got the answer I was looking for! Thank you very much

• Closure of a state machine in queue event with several parallel loops

  I am trying to find the best way to stop a program that consists of an architecture of State machine in line waiting for event with several parallel loops. Can anyone recommend the best way to achieve this in my attached VI? (To browse the forum, this seems to be a frequently asked question, but I have not found a solution that works for me.)

  I look forward to any comments on my as well code, if someone is willing to offer it.

  My program needs:

  If the user press the 'Stop' button, the program should prompt the user with "are you sure you want to stop the program?" and then return to a State of rest or move forward to stop the program. In addition if there is an error, the program should prompt the user to ' clear the error and continue, or stop the program. Then back to the idle state or move forward to stop the program.

  Architectural details:

  The program consists of 3 parallel loops: (1) a loop of event management that places different States of a queue of the State, (2) a State Machine that enters the State that is removed from the queue of the State and (3) a loop error/Shutdown, which deals with errors in the error queue management.

  During normal shutdown, where running handling loop in the case of event 'Program.Shutdown' and 'Shutdown' and the 'Idle' States are added to the queue of the State. In the state machine, the State of 'Stop' is invoked. Special "5000" error code is added to the queue of the error. In the loop of error handling and stopping, "5000" error triggered a prompt that asks the user if they want to stop the program. If the user chooses not to stop, a notifier StopNotif is sent to the State of 'Stop' and 'Program.Shutdown' event case with notification 'Go '. If the user decides to stop, the Notifier sends the notification "Stop". Loop and event management State Machine ends when they receive the notification "Stop".

  In case of error, the program behaves in the same way: If the user chooses to clear the error and continue, the program returns to the status "pending".

  HOWEVER - if the user chooses to stop the program, the program crashes. The author of the notification that is sent to stop the loop of events and State Machine management cannot be read because event Program.Shutdown and the stop State (which contain the function "Waiting to notify") are not active.

  I was able to activate the stop State by Queuing in the loop of error/Shutdown management. But I don't know how to activate the "Program.Shutdown" event by program and thus access the function "Waiting to notify" inside.

  I tried to put the function "Waiting to notify" outside the structure of the event, so the event-handling loop never ends. Placing timeouts on the "wait for declaring" and the structure of the event makes the programme of work, but I want to avoid using timeouts because I don't want to turn my event program into a program of polling stations. I would also avoid using variables or nodes property to stop loops, because that requires the creation of a control/indicator for something that the user does not need to interact with.

  Thank you!

  First of all, close the notifier outside loops with your queues.  Second, you must use a user event to send the message to the event structure loop so that it stop in the case of the stop on an error.

• Slide with several digital poster Down filter event Bug button?

  A key event filter on a slide with several digital screens down does not work as expected when not waived. If you for example tab of this slide with two digital screens digital display, the cursor remains on his position, rather than get KeyFocus to the next control. Same behavior at fault if you want to move the cursor on the left/right keyboard, nothing happens. Anyone an idea why?

  A simulation of that VI is attached. All other controls, a Slide with a digital display or a standard digital control, the key Down event filter behaves as expected... I tested in versions 8.5.1 LV (attachment), LV2012SP1 and LV2013.

  A teammate now found a solution or workaround. We do not know if this is the way it should be, if yes, then it's a bit hidden, but it works!

  It seems that the cursor needs to know on what digital display the FocusObj is when you use the event notifier KeyDown. Then, when to get the reference of the digital display active and the wiring of this reference to the terminal FocusObj filter event everything works as expected, numbers of tabs, typed, cursor etc and have to filter and notify events structure to the event.

  A vi and a printscreen are attached.

  The question is probably due to the specialty of slides and the class NumericWithScale in general, as its digital displays are a little under References and during the implementation of the features of event KeyDown for the class NumericWithScale filter, LV simply does not know on which side of the main action control part must be executed.

  Or someone has a better solution and explanation?

• problem with several graph XY axes

  Hallo,

  I'm tracing different variables in the same plot with several axes. I have the following problem (see attachment)

  the y axis secondary on the right side of the plot has a large area of him and one of the other secondary axis falls right above others. I tried it in the two labview 8.2 and 8.5 with the same results.

  any ideas?

  Thank you in advance,

  Thodoros

  Try the following movements:

  Right-click-> popup menu-> advanced-> reset scale layout

• LaserJet P1102w: Laserjet P1102w cannot activate the installation with Windows Vista 32 bit PC computer wireless

  Hello forum HP, I can use the Laserjet P1102w with USB connection on 3 different devices including a portable Apple and PC Windows Vista and Windows 7 laptop computer, but can not perform a wireless installation with the broadband internet connected wireless PC running Windows Vista 32 bit. The main message is that the computer does not find the printer even when using the USB connection. Any help would be appreciated.

  Hi @Kaiser3107,

  Welcome to the HP Support forum.

  I understand that you have a HP LaserJet Pro P1102w printer that connects three thin devices via the USB port, but you can not perform a wireless installation on a fourth device, equipped of Windows Vista 32-bit, because the PC does not detect the printer via the USB port. I would like to help with that.

  Here is a support document which includes 'USB device is not detected by Windows' which can help the issue of detection - Troubleshooting (Windows Vista) USB connections.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Officejet 6500 a how to scan a document with several pages in a single file?

  HP Officejet 6500 a Plus e-All-in-One - E710n

  Windows 7 (64-bit)

  How to scan a document with several pages in a single file?  After each scan, my old printer (psc 2110) asked if I wanted to scan another page.  In the end, I got a PDF with multiple pages.

  This new creates a file for each page, and I can't find a way to create a PDF with multiple pages.

  Hi mpw101,

  You must press the Add/Remove button, to add pages additionla scanned to the existing file. If you do not see this button try decreasing the analysis DPI setting. Let me know if this helps you?