WebServices - availability analysis

Similar Questions

• Wi fi available?

  I have a new Droid Maxx, I know for a fact that there is no wi fi in my workplace, even if my phone seems to find a bunch of networks. I can not connect to any. It seems that these networks is those found in an earlier position and the phone continues to think that they are available. If I hit scan, nothing changes, and it displays yet all these networks 'false. ' When I leave the location it seems to reset and works properly again. Has anyone seen this problem?

  Go to setting tap WiFi not where it say on off but the WiFi is oneself. Then you should see three block in the lower right corner to press them. A menu will appear advanced seclet. Uncheck the always available analysis. Leave it unchecked. Personally, I have the box not controlled, except for the optimization of the WiFi. You can also access the WiFi settings with quick Panel. See if that helps and account thank you

• WebServices API performance test. BB10

  I would like to test the performance of my Application that uses the BB WebServices API for BES10.

  How can I add false devices to perform the test?

  I have not found any BlackBerry tool or third-party applications.

  Thank you

  You cannot add a fake device.  You can create users in the system using the BWS with the API "createUsers.

  You can create administrative users who do not have a device, but order of queries users device information (device with users), they must be registered and then company activate their device against that account which was created (using the email address provided when they were created).

  A number of companies use BWS (BB WebServices) available to their users prior to their receiving device user.  Once they receive their device, the user will add an account using the Enterprise Activation password that was set for them when they were saved/created.

  In the absence of the user to activate their (physical device), you will only have the user objects stored in the database with no realization of activation (No PIN, the device type, model, OS version, etc.).  You can still use BWS for the users from the list, add it policies, add them to groups, etc.

  I hope that clarifies things, even if it is not the result you're looking for.

• Schema not available as a scheme of analysis

  Hello
  I have apex running on an existing Oracle instance to a specific schema. I created a new schema in this same forum, and I want to redirect my apex in this scheme application. The schema is not available under Edit Application Properties-> Security-> schema of the database-> scheme of the analysis. When I try and hardcode the name of schema, I get this error:
  
  "No privilege to build in the schema use the list of values to the previous page to select a schema that you have the privilege to build."
  
  Is there a grant or something need me to do my new schema available in this list? I'm under apex 4.2, oracle 11g.
  
  Thanks in advance,
  John

  You need to add the schema to the workspace of the administrative user interface

• Analysis is no longer available on LaserKet CM1415fnw

  I have this printer more than 2 years, and recently, he was not available on the network. I downloaded the latest drivers from HP for Mac website. Now I can print, but the scanning feature is not available for me

  I'm on a Mac with OSX 10.9.4

  In addition, do not know how to let any other Macs household access this printer (it's the WiFi). They use to be able to access, but now they can't? Should I download this new driver for each device?

  THX

  Well, I restarted my wireless router, and now I get the connection to the HP printer AND scanner!

  It works fine now.

  Thanks for your help

• Feature is not available on the all-in-one HP analysis

  I have a HP 4 in 1 printer, copier, scanner & fax machine.  "" However, when I try to "scan" something the printer in my computer it is written "option not available.  He has always worked with my old computer but I just bought a new Toshiba laptop and this option will not work now.

  Hello

  You have installed the latest Windows 8 drivers / software * (if they exist) on the site of HP here:

  http://www8.hp.com/uk/en/drivers.html .

  If you do not have Windows 8 may have installed a basic printer driver which does not scan. When the correct (if available) drivers have been installed, you can find the scan function is then works.

  If answer you back here please include the full model No. your printer and use 32 - Bit or 64-Bit Windows 8.

  * Make sure that you choose the drivers 32 or 64-bit according to your version of Windows 8. To find out if you are running Windows 32 or 64 bits 8, press The Windows Logo key + X on your keyboard, and then select System. Now look where it says, "System Type".

• jDeveloper WebService package installed, but the Web Service features are not available in the application wizard

  Hello

  I installed jDeveloper (Studio Edition Version 12.1.3.0.0) and also I installed some packages, for example the Web Service package. But when I create a new application project / I can't select for example of Web Service Client / Proxy and others. See photo:

  

  Do you know why? How can I make available?

  
  THX!

  Milan

  OK, I found it

  I created an application (Custom Java) with the empty project, and then I was able to add the web service client project (right click on the 'project' and select 'of the Gallery"). The same window appears as in my first post, but all features are available

  

  Thank you!

  Milan

• ESX not available after a new analysis

  Hello

  We had a problem with our infrastructure after a new analysis of HBA. ESX became unresponsive, and we could not access the data stores.

  I think I can be about the problem.  Do you know if we can connect an ESX to different storage devices? for example, an ESX in an IBM DS4700 as well as an IBM DS4300? If so, how have we implemented zoning? must be an area for each storage device, or can we create a single area to contain both?

  Thanx

  You probably use ESX 3.5, here is an updated link to update to a more current resolution to determine and solve problems with IRQ conflicts: http://kb.vmware.com/selfservice/viewContent.do?externalId=1003710&sliceId=2

  Please allow points if the solution is correct.  Thank you.

• My tsstcorp cd/DVGW-ts-l632 ceased to be able to write cd/dvd, after microsoft's analysis said no combustion available with this drive.__Can help you? __Stopped a few months of work.

  TSSTcorp cd/DVGW-ts-l632

  Replace the drive. It is common to do so. MS - MVP - Elephant Boy computers - don't panic!

• Acrobat Pro Preflight abandons analysis with 'insufficient memory' on 64-bit Windows 7 despite the free/available memory

  

  

  

  

  In fact, the question is not if there is enough physical memory on your system, but if Acrobat has exhausted its 32-bit address space. Acrobat on Windows (32-bit or 64-bit versions of Windows) is still a 32-bit application, limited to about 4 GB of address space maximum virtual memory , which by your screenshots, is exhausted.

  You don't specify what version of Acrobat Pro, you are running, but before DC Acrobat (i.e., Acrobat 11 and earlier versions), it was relatively easy to run out of virtual memory when using control upstream against long, complex, or the two long and complex PDF.

  If you run Acrobat 11 or earlier, the only solution is to upgrade to Acrobat Pro DC in which many aspects of preflight have been significantly updated including support for long and complex documents and performance.

  If you use Acrobat Pro DC, I would personally like you to contact me via a message in these forums the details so that I can help analyze what is happening. If there are still issues in Acrobat Preflight DC, we would fix it if possible.

  -Dov

• How to change the scheme of the analysis remains

  Hi all
  
  I'm testing the new Webservice REST feature, but this leads to an error:
  
  With the help of Apex 4.2.1.00.08, listener 2.0.1.64.14.25 I have implemented a simple Web service (method: GET, format: JSON) which
  querys a table.
  When I try to test my webservice (using the 'Test' button), the following error appears:
  
  Ask the path passes the validation of syntax
  Application of mapping to the database pool: PoolMap [_poolName = apex, _regex = null, _workspaceIdentifier = null, _failed = false, _lastUpdate =-1, = null, _type = REGEX _template]
  Applied database connection information
  Try to deal with the PL/SQL gateway
  Not treated as a request of the PL/SQL gateway
  Try to treat as a RESTful Service
  Determine if the request can be sent as a RESTful Service occupied
  The request path has a path segment, continue the treatment
  No main tenant established yet, continue the treatment
  APEX_LISTENER pool exists, continuous treatment
  Corresponding tenant exist, continuous treatment
  Modul/template/match: modul/template/score: 0
  Choose: oracle.dbtools.rt.resource.templates.jdbc.JDBCResourceTemplateDispatcher as a current candidate with score: Score [handle = JDBCURITemplate [scopeId = null, templateId = 1019223475312614 | 5204902308237886, uriTemplate = modul/template /], score = 0, range = SecurityConfig [constraint = none, realm = NONE, logonConfig = LogonConfig [logonForm = null, logonFailed = null]] corsEnabled = true, originsAllowed = [,]]
  Determine if the request can be sent as a RESTful Service occupied
  The request path has a path segment, continue the treatment
  Tenant main already established, cannot send
  At chose oracle.dbtools.rt.resource.templates.jdbc.JDBCResourceTemplateDispatcher as the final candidate score: Score [handle = JDBCURITemplate [scopeId = null, templateId = 1019223475312614 | 5204902308237886, uriTemplate = modul/template /], score = 0, range = SecurityConfig [constraint = none, realm = NONE, logonConfig = LogonConfig [logonForm = null, logonFailed = null]], originsAllowed = [,], corsEnabled = true] for: GET modul/template /.
  Choose: oracle.dbtools.rt.jdbc.entity.JDBCTenantDispatcher as a current candidate with partition: partition [handle=oracle.dbtools.rt.jdbc.entity.JDBCTenantDispatcher$TenantTarget@1537060, score = 1, scope = SecurityConfig [constraint = none, realm = NONE, logonConfig = LogonConfig [logonForm = null, logonFailed = null]] corsEnabled = true, originsAllowed = [,]]
  Oracle.dbtools.rt.jdbc.entity.JDBCTenantDispatcher chose the final candidate score: Score [handle=oracle.dbtools.rt.jdbc.entity.JDBCTenantDispatcher$TenantTarget@1537060, score = 1, scope = SecurityConfig [constraint = none, realm = NONE, logonConfig = LogonConfig [logonForm = null, logonFailed = null]], originsAllowed = [,], corsEnabled = true] for: GET prx/modul/template /.
  PRX, modul, model, is a public resource
  Modul/template/is a public resource
  Using the generator: oracle.dbtools.rt.json.query.JSONQueryGenerator
  JDBC query like: N/A
  Error model of resource assessment: ORA-00942: table oder view non available
  
  
  
  I see what goes wrong: "Performing JDBC request as: N/A. JDBC using a bad scheme ("N/A").
  So, my question is, how do I change the schema of analysis for JDBC/WebService?
  
  Thank you very much
  
  Michael

  jfle wrote:
  Yes - this is the reason why,
  but is it possible to change or remove the first scheme implemented?

  See {message identifier: = 3757162}

  We have removed the assignment of n/a in the workspace, but the REST service running with n/a?

  Do not know may be a bug.

  Maybe try to export you restful webservice definition > edit the export in textpad/Notepad file and check the schema of analysis

  You will see a block of something as below, just change the desired p_parsing_schema > and then import it back

  wwv_flow_api.create_restful_module (
    p_id => 7113266627142076447 + wwv_flow_api.g_id_offset
   ,p_name => 'oracle.example.vikram2'
   ,p_parsing_schema => 'APX'
   ,p_items_per_page => 25
   ,p_status => 'PUBLISHED'
    );
  

• I can't save analyses after you download Sierra OAS

  I can't save analyses after you download Sierra OAS.

  The "Save" button is grayed out?

  Hello 2014anthony1,

  Thank you for using communities of Apple Support.

  I see that you can not save scans after updating to Mac OS Sierra. I would make sure I can save analysis too, I do a lot of scanning on my Mac. Let's work together and get this problem is resolved.

  I suggest to use macOS Sierra: update or change the printer software, more precisely, that these sections:
  
  

  Most printers are compatible with Mac OS. When you add a printer, Mac OS automatically uses AirPrint to connect to the printer or the printer software downloads (also called a printer driver).

  If you can not use a printer that is already added, or you see not the options you want in the print dialog box, you can add the printer again with different or software to print settings different.

  Add your printer with different parameters

  1. Choose the Apple menu > System Preferences, and then click Printers and scanners.

  2. Select your printer from the list, and then click the button Delete .

  3. Click on the button Add and if a context menu appears, choose Add a printer or a Scanner.

     A dialog box is displayed that lists all Hello, IP, printers directory shared, and open on your local network. It may take a minute or two for your printer to appear.

  4. Select your printer, when it appears in the list, and then do one of the following:

     • Use AirPrint: Click on the drop down menu, then choose AirPrint (or Secure AirPrint). If AirPrint is not on the shortcut menu, the printer does not support it.

     • Use a printer software installed on your Mac or downloaded from Apple: Click on the drop down menu, then choose Select software.

     • The software to print a file on your Mac: Click on the dropdown menu, then select other. Select the file, and then click Add.

  Update your printing software

  If your printer is not how to use AirPrint, you can use Software Update to download the latest version of the software. If you don't do this, you see a message that software is not available when you connect your printer.

  • Choose the Apple menu > App Store, and then click updates.

    Install the software updates that are listed for your printer.

  • If the software for your printer is not available using the software update, you can contact the manufacturer for more information. Maybe it's that your printer is not compatible with Mac OS. To check, see the article Apple Support printer and scanner software available for download.

  If you install the printing software you don't have Apple, printing software can not be updated automatically when you use the software update.

  Let us know if that helps. We'll help you get through this.

  All the best!

• On old laptop, I got a type of analysis with RSS feeds toolbar. Now have 18.0.2 and do not get to see what is later, all the time. How can I get RSS analysis?

  Is available or not for RSS bar analysis? He was a favorite of mine feature to stay connected without having to open a site on news or click on anything other than the title that interested me. If the analysis is no longer available, is there a page in order to get similar things to the old RSS feeds? Can it be done through FaceBook?

  The only RSS feature in Firefox's live bookmarks.

  • Live Bookmarks - subscribe to a web page for news and updates

  For a news ticker, you've probably used an add-on like HeadlinesTicker.

  • https://addons.Mozilla.org/firefox/addon/HeadlinesTicker/

  As far as I know, this is the only news ticker Add on available (another one, NewsBar seems to be obsolete and non-functional in the latest version of Firefox). However, there are several other RSS reader modules that display news in formats other than a news ticker.

  • https://addons.Mozilla.org/firefox/addon/bamboo-feed-reader/
  • https://addons.Mozilla.org/firefox/addon/NewsFox/

  You can also subscribe to feeds through web sites as follows.

  • http://www.feedly.com
  • http://my.Yahoo.com
  • http://www.newsblur.com

• Satellite Pro M50: 896 MB of RAM available instead of 1536 MB

  I recently bought a 1 GB RAM module for my laptop Toshiba Satellite Pro M50. The laptop has already had a 512 MB card installed. I used the scanner memory from crucial.com to ensure what I bought compatible memory.

  I installed the 1 GB module, and now all of my system will show is that I have 896 MB of RAM available. It is of course the module 1024Mo less 128 MB for the execution of the shared video card. My BIOS shows also only 896 MB of available RAM, but if I run a program of analysis such as CPU - Z it shows 2 modules of RAM installed with a total of 1536 MB of RAM available.

  I tried the two RAM modules individually in both slots and the two modules together in both slots. Both work individually and both work in two locations in memory, but combined the module of 512 MB is not displayed. 1 024 MB module seems to be fine. I am running Win XP SP2.

  Do you have any ideas I can do to fix this?

  A second question, I used to play DVDs on my laptop, but recently, when I try, the sound crackles & pop & the DVD skips a little every two seconds... any ideas?

  See you soon!

  Nick

  Hello

  I found similar issues here in this forum and especially he was bound for the bar of memory is not compatible.

  According to the information on the Toshiba Web page module the 1024 MB PC2700 (PA3313U-2M1G) is supported and can be used.

  I put t know what the manufacture of your new memory is, but I wouldn't recommend mix parts. Try to use both modules of the same provider and use both with exactly the same specifications.

  Hope this helps a little

  Good day...

• FCPX analysis sequences for stabilization, then stabilization rounds off the coast, which escapes me?

  I have the clip in a cam multi format, but I realized that I just couldn't stabilize a multi-cam even, the option was not available. So I went in the multi-cam clip and tried stabilizing angle, cut the part I was using and let the stabilizer integrated to analyze. Once it was completed, it turns the stabilization, and nothing was. I tried again by taking the element of origin of the event, and it's the same thing: analysis of dominant movement, 100%, then stabilization was automatically turns off and I remained without result.

  I guess I'm not understanding something and there is a reason that this clip will not stabilize, so I was wondering if anyone would be able to explain and if there is a work around, or if maybe it's a bug which is known.

  Thank you for taking the time to read my post, all the answers are appreciated!

  AAre activate you the stabilization or just run a scan?