WebWorks connected BBM application - data transmission
Hello
Where can I find a sample application that communicates with the instance on the other device using the bbm Protocol? Like the Tic-Tac-Toe for two users, bbm etc.
It is available at all?
Are there differences in the Protocol between OS and BB10?
Kind regards
Unfortunately, these APIs is not supported on BlackBerry 10. Sorry I can't be more helpful.
Tags: BlackBerry Developers
Similar Questions
-
PIX 501 establish IPSEC connection, but no data transmission
Hi all
I had a strange problem with a cisco 501 pix connected cisco 3000 vpn concentrator remotely.
The pix is configured for the remote access session to the hub. The problem is that when I do a ping the ipsec tunnel is established and bytes will be transmittet but it's no or few bytes are received by the hub.
So I can't? t ping Lan behind the pix.
I don't know what could be the probelem. The two phases are created.
What can be the problem?
Attached to the PIX config.
Best regards
Kai
6.3 (4) version PIX
interface ethernet0 car
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the password xxx
passwd xxx
host name
domain ciscopix.com
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
outside ip access list allow a whole
inside_access_in ip access list allow a whole
pager lines 24
MTU outside 1456
MTU inside 1456
IP address outside pppoe setroute
IP address inside 123.0.0.200 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
location of PDM 123.0.0.0 255.255.255.0 inside
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
outside access-group in external interface
inside_access_in access to the interface inside group
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
http 123.0.0.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Telnet 133.0.0.0 255.255.255.0 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
VPDN group pppoe_group request dialout pppoe
VPDN group pppoe_group localname *.
VPDN group ppp authentication pap pppoe_group
VPDN username *.
password *.
vpnclient Server 111.x.x.200
vpnclient mode network-extension-mode
vpnclient vpngroup vpn password *.
vpnclient user_name password pix *.
vpnclient enable
Terminal width 80
Cryptochecksum:xxxx
: end
you are the ping of the network behind the hub to devices behind the PIX?
You can then check if you see the data received on the end of PIX? You can check that by issueing the command
Crypto ipsec to show his
It will tell you by his how many bytes have been received / sent.
If you see bytes received and sent and they will increase after you issue a ping (usually the increase is 4 packs), you know this isn't the pix, but something as nat-traversal that blocks the return circulation.
-
Is an application connected BBM still works when BIS expires?
Hello
I'm working on a connected BBM app. My application depends on BBM to work. Therefore, I use the dependency approach "proxy". If BBM does not work, my application should not work either.
I have a doubt in this regard.
Let's say that we have achieved this scenario:
Install us and launch an application connected with BBM and we register successfully with BBM. At this point the app works fine.
We are a map of talk. BIS, expires at the end of the month. BBM surveys doesn't work anymore.
Since you are already registered with BBM, your connected BBM app will work even if BBM does not work?
Thank you so much
Concerning
There is no API to check if BBM 'works' as far as I know.
As peter says, you can check the status of the coverage and if BIS/BES is not available then do run your application. The only problem with this approach is that the connection cannot be completely stable and you could try to detect the availability of the BIS/BES at a time where there is a drop of connection.
You could solve this problem with a little reflection well. It is not that big of a train smash.
-
I've recently updated the OS on my bold 9900. After that it's over, my BBM were all destroyed. Many of the applications had to be restarted (Protect, Tracker BB Phone, etc.). Many applications data disappeared (locations on Google maps), the data of the city on the subway, etc. Not a major, but very annoying problem. Updates should not destroy all data on any place on the device. One having this problem?
OS updates have always wiped data in applications.
With respect to the BBM, you lose conversations, but your contacts should still be there. I recommend doing local backups of your BBM contacts, however, using the BBM options.
It has been like this forever.
-
Original title: error loading of C:\Document and Setting\user_name\Application Data\wlaplg.dll the specified module could not be found
For two or three weeks there whenever I boot my netbook and connect to my user account window I found this error message RUNDLL pop-up window:
Error loading of C:\Document and Setting\myusername\Application Data\wlaplg.dll
The specified module could not be found
What is the problem? and how to solve?
Hello
Click on Start menu and click Run.
Inside run, type MSCONFIG and press Ok.
Now, you will get a System Configuration window.
Inside you go to the tab called start-up
In the Startup tab, you can see a list of files from loading when you start the computer.There, you can see the above file Rundll32, "C:\Document and Setting\user_name\Application Data\wlaplg.dll ' like this.
A chech this one and press apply and press Ok.
Now you will be asked to restart the computer.The problem will be solved after restarting...
-
BlackBerry Smartphones BBM application,
I have problemsreconnecting the BBM application, he disappeared and I can not find. I went for Blacberry App World and a message saying that the Blackberry App World is having connection problems to you BB App World Server and check my network connections. Idid and connections are good and functional. Help, please
- Your options > device > Applications, remove BBMessenger.
- Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart.
- Then, using your BlackBerry browser, go to www.blackberry.com/bbm and download & install again.
-
BlackBerry Smartphones Intellisync: Cannot read the registration of application data
Intellisync worked, but it still fails.
RIM.log says:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - On 1/15/2010 2:48 PM Synchronize Device Address Book with Microsoft Outlook Contacts First System: Device Second System: Microsoft Outlook Second System File Name: Address Book Conflict Resolution: Notify Input From First System: READ "Hotline" 27 more READ statements here, but not shown here to maintain confidentiality READ "Smith" Total Inputs From First System: 30 Field mapping used for translation: Device Microsoft Outlook First Name ---------------------- First Name Middle Name --------------------- Middle Name Last Name ----------------------- Last Name Title --------------------------- Job Title Company Name -------------------- Company Name Work Phone ---------------------- Business Telephone Number Work Phone 2 -------------------- Business Telephone Number 2 Home Phone ---------------------- Home Telephone Number Home Phone 2 -------------------- Home Telephone Number 2 Other Phone --------------------- Other Telephone Number Work Fax ------------------------ Business Fax Number Mobile Phone -------------------- Mobile Telephone Number Pager --------------------------- Pager Number Internet Address1 --------------- Email1 Address Internet Address2 --------------- Email2 Address Internet Address3 --------------- Email3 Address Address1 ------------------------ Business Address Street 1 Address2 ------------------------ Business Address Street 2 City ---------------------------- Business Address City State/Prov ---------------------- Business Address State Zip/Postal Code ----------------- Business Address Postal Code Country ------------------------- Business Address Country Home Address1 ------------------- Home Address Street 1 Home Address2 ------------------- Home Address Street 2 Home City ----------------------- Home Address City Home State/Prov ----------------- Home Address State Home Zip/Postal Code ------------ Home Address Postal Code Home Country -------------------- Home Address Country Notes --------------------------- Body User Defined 1 ------------------ User Defined String 1 User Defined 2 ------------------ User Defined String 2 User Defined 3 ------------------ User Defined String 3 User Defined 4 ------------------ User Defined String 4 Salutation ---------------------- Title Web Address --------------------- Web Page Direct Connect ------------------ Radio Telephone Number Categories ---------------------- Categories Picture ------------------------- Contact Photo Birthday ------------------------ Birthday Anniversary --------------------- Anniversary Nickname ------------------------ Nick Name Home Fax ------------------------ Home Fax Number Unable to read application data record. Translation Canceled!
I have much more than 30 entries AddressBook on my BB.
Is this telling me #30 is bad?
I found the wrong address book entry. It was recently added by FaceBook. He seemed OK, but IntelliSync doesn't. I wish that there is a way to sort the address book of BB by the update...
-
Failed to connect Mobily Connect 4 G data card
Original title: Internet on the data card
When connecting my mobily Connect 4 G data card, I get the following on the failure of the connection
Problem event name: BEX
Application name: Genie.exe Mobile
Application version: 0.0.0.0
Application timestamp: 4f914d20
Fault Module name: Genie.exe Mobile
Fault Module Version: 0.0.0.0
Timestamp of Module error: 4f914d20
Exception offset: 0007235f
Exception code: c000000d
Exception data: 00000000
The system version: 6.1.7600.2.0.0.256.1
Locale ID: 2057
Additional information 1: 4d4c
More information 2: 4d4cb9a6d35aafe6e175464c625dd3c8
3 more information: c4b0
Additional information 4: c4b06111e79101384dc45b79bff6bf49
Left OneDrive forum Windows 8.
Hi Krishnan,
What operating system is installed on the PC? I am currently moving to forum Windows 8.
It seems to be a problem with the software installed for the device or third-party software is in conflict with this device. Mobile engineering does not (not confirmed) seems to be a software provided with this unit.
Kindly, follow these methods and check if that helps.
Method 1:
Troubleshooting of hardware and devices
The hardware and devices troubleshooter can detect and correct errors and incorrect settings in devices. You can view these steps to run this utility for troubleshooting:
a. press the Windows key + X set, select Control Panel
b. change the option on the top right large icons view
c. click Troubleshooting , and then click show all on the left panel
d. run the hardware and devices Troubleshooter and follow the on-screen instructions.Method 2:
If that does not help, please uninstall Mobile engineering and then try to configure Mobily connect 4G data card.To uninstall the software, follow these steps.
a. press Windows key + X set and then click CControl Panel.b. under the notice of:, choose large icons and then tap or click programs and features.
c. click on the software and then click on uninstall. Follow the instructions on the screen.
See the article:
Uninstall, change or repair a program
http://Windows.Microsoft.com/en-CA/Windows-8/uninstall-change-programI would also say to post you your query in the Mobily Connect support forum.
http://www.Mobily.com.SA/portalu/JForum/forums/list.pageLet us know if it helps. If you have any other questions, we will be happy to help you.
-
Cannot connect in application translated when other than the main language is selected
Hello
I am facing a problem due to a translated application.
Whenever I'm trying to connect to the translated application (which means that I enabled the language of the application to another language in the primary) I will not be connected. It ist, no error message is displayed. Apex just redirects to the login page.
I'm currently debugging the connection process, but unfortunately I did not help. Maybe someone is able to tell me what means this debug. Although the research he gave some results, none of them were useful in some way.
Language main application German (Germany) (de) Application derived from language Session It is translated into Polish (pl). There is a running application process "on the new instance", the setting of the APEX_UTIL. SET_SESSION_LANG('de') for testing purposes (later it will be dependent on the language of the browser).
Debug log:
Elapsed
Execution of
Message
Level
Graph
0.00431 0.00035 A C C E P t: ask = "P101_PASSWORD." 4 0,00465 0.00093 The NLS settings reset 4 0.00557 0,00020 ALTER session set NLS_LANGUAGE = "GERMAN". 4 0.00577 0.00014 ALTER session set NLS_TERRITORY = 'GERMANY '. 4 0.00591 0.00013 ALTER session set NLS_CALENDAR = 'GREGORIAN '. 4 0.00603 0.00014 ALTER session set NLS_SORT = "BINARY". 4 0.00617 0.00025 ALTER session set NLS_COMP = "BINARY". 4 0.00642 0,00003 ... "NLS: decimal separator Set =". » 4 0.00646 0,00021 ... NLS: Set NLS Group separator = ",". 4 0.00666 0,00020 ... NLS: Set g_nls_date_format = 'DD-MON-RR. 4 0.00687 0,00022 ... NLS: Set g_nls_timestamp_format = 'DD-MON-RR HH.MI. SSXFF AM. 4 0.00709 0,00126 ... NLS: Set g_nls_timestamp_tz_format = 'DD-MON-RR HH.MI. SSXFF AM TZR '. 4 0.00835 0.00058 ... Setting session time_zone at + 02:00 4 0.00893 0.00247 Metadata: Go get the application definition and shortcuts 4 0.01140 0.00005 NLS: Translated applications Id = 110 4 0.01145 0.00004 NLS: Translated the Page Id = 101,11 4 0.01149 0,00003 NLS: Language = pl 4 0.01152 0,00046 ... metadata, fetch translated app info 4 0.01199 0,00018 ALTER session set nls_language = "POLISH". 4 0.01216 0.00004 ALTER session set nls_territory = 'POLAND '. 4 0.01236 0,00003 ... NLS: Set decimal separator = ",". 4 0.01239 0,00015 ... "" NLS: separator Set NLS Group = "" 4 0.01255 0,00015 ... NLS: Set g_nls_date_format = ' RR/MM/DD ". 4 0.01270 0.00016 ... NLS: Set g_nls_timestamp_format = ' HH24:MI:SSXFF RR/MM/DD ". 4 0.01286 0,00007 ... NLS: Set g_nls_timestamp_tz_format = ' RR/MM/JJ HH24:MI:SSXFF TZR '. 4 0.01293 0,00023 Setting NLS_DATE_FORMAT application date format: DD. MM YYYY 4 0.01316 0.00014 ... NLS: Set g_nls_date_format = DD. "" MR. YYYY. " 4 0.01330 0,00015 ... NLS: Set g_nls_timestamp_format = ' HH24:MI:SSXFF RR/MM/DD ". 4 0.01344 0.00865 ... NLS: Set g_nls_timestamp_tz_format = ' RR/MM/JJ HH24:MI:SSXFF TZR '. 4 0.02209 0,00091 Verification of authentication: DBS_APEX_AUTH (NATIVE_CUSTOM) 4 0.02301 0.00017 .. .fetch database session state 4 0.02317 0.00268 elements of Fetch (exact) 4 0.02584 0,00007 ... Sentinel + verification failure 4 0.02591 0.00159 ... Session ID 1737299038216 can be used 4 0.02750 0.00024 ... Session state: saved point new value "FSP_AFTER_LOGIN_URL" = "f? ' p = 201:101:1737299038216:YES: 4 0.02775 0.00025 Redirect to f? p = 201:LOGIN:1737299038216 4 0.02800 0,00073 Turning off engine detected APEX 4 0.02872 - Final validation 4 - Tips are appreciated.
Thanks in advance.
Sebastian
Hi Sebastian,.
This line
... page is public: false
who says no login page itself needs authentication. You should do 101 a public page.
Kind regards
Christian
-
Unable to connect to mobile data iPad mini
mini iPad cannot connect to mobile data, after touch setting, only aircraft, wifi and Bluetooth icon will appear. After that it's notifications. Already insert the sim card and no support written at the top left. He comes to write iPad with wifi signal. My mini iPad model is md543zpa
Hello. Have you tried to restart from the insertion of the SIM card? Hold down the sleep and home buttons until you see the Apple.
-
Before re-installing Firefox 19, I took by mistake backup my profile in a folder - C:\Documents and Settings\garan14\Local Settings\Application Data\Mozilla\Firefox\Profiles and not from C:\Documents and Settings\garan14\Application Data\Mozilla\Firefox\Profiles.
When installing, I chose option "Delete old profiles" and I don't see any old folder under C:\Documents and Settings\garan14\Application Data\Mozilla\Firefox\Profiles profile.
However, I have a lot of important data stored under that profile that has now been deleted.
Is there a way I can restore the old profile data? (PS: as stated above, I have a backup of the profile folder that is located under the Local Settings folder)
I'm in a desperate need for aid. Pls reply as soon as possible.
Firefox stores only cache files to the location of the local settings and not the files in the main folder of the Firefox profile.
There is no need to save this place in local contexts in any case.The main folder of the Firefox profile is in "C:\Documents and Settings\ < user > change Data" on Windows XP.
If you have deleted your personal data during the uninstallation of Firefox and do not have a backup then your only option is to use an undelete utility to see if you can recover this profile folder.
- Recuva: http://www.piriform.com/recuva
-
whay in local settings application data folder is to consume a lot of space?
Why the application data folder in local contexts consumes a lot of data?
From what I've seen myself the urlclassifier3.sqlite file will be of ~ 28 000 KB to ~ 55 000 KB over time. The offline Cache is rarely used by websites to store data, and the Cache file will increase in size, until the user clears the Cache. Difficult to indicate a number of maximum on the size of the Cache size, as I have not seen 'numbers' posted (available disk space is part of authorized size) and I have not used the same profile long enough without emptying the cache to see a size max.
-
files stored in the cache of application data
Recently, my weekly virus scans took longer and longer. The number of scanned files is increased by tens of thousands every week. A search shows carefully files in the directory C:/Documents and Settings/userxxx/application data/Mozilla/Profiles/.../Cache/ is the likely source of all the instant of the hundreds of thousands of files which meets my anti-virus. Does anyone know Mozilla application, these files are created by? They are important or only temporary files "not working"?
The cache of firefox can be erased and should have no ill effects, although some websites can then take longer to load. If you decide to clear the cache, or part of it see:
You can get some info on what is stored in different caches of firefox by typing in the address bar on: cache the results are not very friendly (unless get you your hands on an add-on of the appropriate viewer cache), but it should help you to exercise which builds up and how big they are.
Have a firefox cache increasing by tens of thousands of files every week seems unusual to say the least, and I can start thinking about trying to check if the malware is the cause.
-
What makes c; / documents and settings/temp/application/data medium txt microsoft/fsx/fsx.cfg
Hello
1. what exactly is the problem that you are facing on the computer?
2. have you installed Flight Simulator X on the computer?
See the article and check if that helps:
How to change FSX. CFG to set the maximum amount of autogen objects in a field cell
http://support.Microsoft.com/kb/555739
Please provide more information to help you best.
-
Roaming profiles and application data
We have the roaming profile with 'application data' redirected but it copies still in the pc. We can find no setting or the reason for it arrive, any thoughts on this?
Win2K3 server with xp pro clients.
Sincere greetings,
Mike Boughton
Hi MichaelBou,
Thank you for visiting the Microsoft answers community.
I suggest you post your question in the Windows Server forums to get the best support:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
Thank you!
Maybe you are looking for
-
How the auto uppercase the first letter of each sentence
I use the latest version of the Pages on the Sierra of the OS and I am trying to find a way to automatically capitalize the first letter of each sentence with nothing doesn't. I've been a user of Pages for years and every time announced a new update
-
Whenever I am clicking on the results of the search from the Google search bar, it always opens the homepage of Google. I can only open in a new tab search results by clicking twice. It started when I installed Firefox 12.
-
Hello. Recently, my friend gave me his old laptop, an HP Pavilion DV6700. He kept his own hard drive for security reasons, and when I went back to see what kind of player, he had to, he was a guy I had not seen before. I was wondering where I could b
-
How do sound on my new laptop Inspiron 17?
There sound to the store, and Dell's online troubleshooting tool did not find a problem. The noise seems to be turned on and the volume is up, but still no sound. I have Windows 7. Can anyone help?
-
How to split the screen on 2 monitors?
I have 2 screens (monitors) and to split the info on the main screen so that I / 2 if poster on the 1 screen and the other half appears on the other screen. How is that done?