Went to the Player #11 Player #10; lost my music library, need help

Similar Questions

• Windows Media Player will not play music files - need to reset the file path

  I'm trying to access my music on an external drive (g) using windows media player. The player is looking for music in the E: drive, which is a separate external drive that my friend uses for its iTunes. How to reset the path to the file for windows media player? It gives me the possibility of rerouting individually paths files, but not a lot of re - routing. I have reset the default settings, reinstalled the drive external, even enabled/activated on WMP (of the Panel).

  I tried. The drive G:\ was included in the WMP library before this problem (and to make sure, I deleted and added it). Despite this, the paths for each song pointed toward the drive E:\.  I solved the problem by deleting all of your WMP library (not files) and restart the media player. The files were then reread with the correct file paths.

• My windows media player suddenly emptied my music library.

  * Original title: windows media player library

  my windows media player suddenly emptied my music library: o (I use windows 7 tips or comments or suggestions would be most welcome.) Thank you. JB

  At the top, click on organize and manage library / music.  Choose your music folder and it will rebuild the library references.

• The product I bought doesn't work! I need help and I was stuck in your 'contact us loop' for the last few days and I'm frustrated. How can I contact you for help!

  The product I bought doesn't work! I need help and I was stuck in your 'contact us loop' for the last few days and I'm frustrated. How can I contact you for help!

  Probably the best place to start is the right forum for your product. This is the forum for Distiller Server, a product used by corporations long dead, and probably not what you have. If you can't find the right forum, please let us know the FULL name of what you paid for (Please check your invoice, as Adobe have a lot of similar products), and we may be able to direct you. Good luck!

• Why can't I get on facebook? I can't get into all the other websites I use but not facebook? need help!

  When my home page comes up, I can use internet as usual, I check hotmail, youtube and what not, but when I type in facebook, the first site to get indeed on facebook happens but once I like on facebook get on facebook homepage, nothing comes and the window is white. Nothing comes and its been like that for two days. I use facebook as a way to connect with the important people since I use it for networking and its become a problem, these last two days! need help!

  Hello

  1. what browse web is installed on your computer?
  2. don't you make changes to the computer before the show?
  3. what happens when you try to access the facebook?
  4. do you get an error message?

  I suggest you try the steps from the following link:

  Can't access some Web sites in Internet Explorer
  http://support.Microsoft.com/kb/967897

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  If the problem is with facebook, then I suggest you to post.
  http://www.Facebook.com/help/

• "The call to the method"setTextFormat"can be defined" in Air application (need help)

  Hello

  I followed a tutorial for getting started with ActionScript 3 and Adobe Flash. I'm ready to create an Air application, but I ran into a problem. The tutorial is for Flash Player, so I wonder if it also works for Air applications (sorry, I don't get quite the differences yet).

  So, here's a screenshot of the problem:

  

  The error reads: 'setTextFormat' method cannot be set via the fl.controls:TextArea static type reference

  (Sorry if it's badly translated :/)

  What I have below is a TextArea (taken from the User Interface components) and a button (same). I noticed their name of the instance that you can find in the block of the ACE.

  So since it's the same code as in the tutorial (where he works), why make this mistake? I tried many things to get rid of it, but I'm out of options now, so I ask you for help.

  Kind regards.

  Chances are the tutorial you're folowing uses a TExtField, not a text box.  The TextArea component is not supported by the setTextFormat method.  You will need to use the setStyle method to set the characteristics of the text.  Alternatively, you can use a TExtField and then the setTextFormat method could be applied

• his lost after an update. need help please

  had some kind of system update. his has worked yesterday. update today and now nothing.

  Here is what I have

  HP Pavilion HPE h8xt
  • Genuine Windows 7 Home Premium (64-bit)
  • Intel Core i7-2600 processor four hearts with Turbo-Boost [upward to 3.8 GHz, 8 MB cache]
  • 9GB DDR3 1333 MHz SDRAM [3 DIMMS]
  Drive hard • 1 TB 7200 RPM SATA 3 Gb/s
  • No additional desktop software
  • SAVE $20 on Norton Internet Security (TM) 2011 - 15 months
  • 2GB DDR3 NVIDIA GeForce GT 530 [DVI, HDMI, VGA adapter]
  • Power 460W
  • DVD SuperMulti burner
  • Blu - ray player & DVD player
  • Card of premium LAN Wireless-N and Bluetooth (R) (2 x 2)
  • 15-in-1 card reader memory, 2 USB 2.0 (front), audio, 2 USB (rear-facing top of page)
  • No TV Tuner
  • Beats Audio (tm) - a built-in studio quality sound

  These speakers... http://www.shopping.HP.com/webapp/shopping/product_detail.do?product_code=BR386AA%23ABL

  Hello

  Please follow these steps:

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Kind regards.

• Why can't I access my CC of libraries in all applications? Get the message ' something going wrong initialization Cloud creatives library "any help greatly appreciated.

  Why can't I access my CC of libraries in all applications? Get message "something went wrong initialization library creative cloud" any help greatly appreciated.

  Hi Paul,.

  Please, try the following steps:

  • Close all applications CC
  • Complete the process monitor activity/task manager (CCLibrary).
  • Restart any application and check.

  Hope that helps!

  Kind regards

  Sheena

• VISA can process the framework? Why I got BFFF006B error? Need help!

  Hello

  I have a device that sends the message by RS232. But the message package is a bit different from normal operation. For example, if the message is FF 06 43 02 C1 - 02, the ninth bit in the first byte FF is set to 1 'and the rest of the bytes are the value ' 0'. To send the message to the device, I have to change the parity between 'bookmark' and 'space '. But how to receive this package of data with VISA? I use normal receive routine, he says that there is sampling error

  Is there someone me has similar problem? Thank you very much!

  Hello

  You can implement the ninth bit Protocol in LV, I use it all the time.

  In my system, the first byte is the ninth bit set and for all the other bytes the ninth is equal to zero. It looks like different to normal to the UART parity, so that you get a parity error.

  You can use parity 'Mark' and 'Space' to force the bit parity '1' or '0'. Send the first byte with a 'brand' parity and the remaining bytes with parity of 'the space '.

  Receiving the bytes with parity translates into a parity error. Just ignore this error.

  The downside is that you can not see the byte is the first byte. But in a test configuration, it works for me.

  Normally this kind of interface is managed by a microcontroller as the C 80 31.

  Kees

• Windows 7 service pack 1 for 64 home basic system refuses to download. Never went from 0% installed. Tried more than 10 times. Need help.

  See tittle for the description of the problem.  Why can you give us a service pack that some many people have trouble installing?  Its stupid.  Wasted my time and yours.  Please help with this and post the fix so that others don't have to go through this same process.

  Thank you
  Jeff

  Hello Wookie312,

  Thanks for your post.  Please follow the troubleshooting steps below and let us know the results of each utility.

  1. download / install and run the tool update system - CheckSur.  You can download the tool from the link below.

  Download the tool update system (64-bit)

  2. click Start type cmd (you should see the command prompt fill up) right click and select run as administrator

  Inside the command prompt, type sfc/scannow

  For more information regarding the file system checker.

  * If corruption is found, see How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  3. once the SFC is finished, check your hard drive for errors.

  4 restart the system update readiness tool. If errors have been eliminated, try to reinstall Service Pack 1. If this is not the case, go to step 5.

  5. perform a Startup Repair, when starting, try to install the Service Pack.

  We can't wait to hear back on your part.

  See you soon

• Windows update code error 00000646 KB960003 and others. did a scan and found that I have some corrupted files that cannot be fixed in the C:\windows\Logs\CBS\CBS. JOURNAL, I need help fixing problems

  error message 00000646. tried repair, cleaning of files and did the sfc/scannow

  Have you seen this sticky yet? -Online http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista x 86 the screen freezes after 20 minutes - captured some logs - need help

  Hi-
  I checked all the settings of power and as the laptop is plugged in (it's a Dell Vostro 1700), I changed all the settings to never Hibernate, never sleep and turned off the screen saver.  I'm not saying the monitor turns off after 45 minutes.

  The screen still freezing occurs, and the only way to get out of it, is a hard reset of the operating system (power button).

  Here are 2 logs system, I found, actually rebooted device itsself so after freezing.
  Log name: System
  Source: iaStor
  Event ID: 9
  Level: error
  Description: The device, \Device\Ide\iaStor0, did not in the expiration time.

  Less than 1 min later that the next system log appeared, shows that he has been forced to restart.

  Log name: System
  Source: USER32
  Event ID: 1074
  Level: information
  Description: The process wininit.exe has inititaed restart the computer, workstation, on behalf of the user for the following reason: no title for this reason could be found.
  Reason code: 0 x 50006
  Comment: The system process 'C:\windows\system32\lsass.exe' ended unexpectedly with status-1073741819 code.  The system will now shut down and restart.

  You can check one thing in your power settings? Are - this you hard drive worth powerdown after 20 minutes? You will find that in the advanced power settings.

• I have a compaq presario cq57 notebook pc and my wireless is not solving the problems of work said that the access point and wireless network card works I need help to fix this please

  the internet works only with the ethernet cable and not wireless. I have service with comcast.

  Hi, Antonia.
  Thanks for posting your question on the Forums of community of Microsoft.
   
  1. do you get an error message?
  2. don't you make changes to the computer before the show?
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  Check out the link and follow the steps in the article:
  Troubleshooting your wireless network and Internet access (Windows 7)
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02543015#n55

   

  Method 2:

  Reference:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Hope this solves the problem

• I got the error code: 0xc0000034 on my windows 8 and need help.

  I got home exhausted and started my Windows 8 desktop computer I was greeted with a screen that says The Boot Configuration data file is missing some required information. File: \BCD error Code: 0xc0000034. I don't know anything else and have no idea of what are the parameters of the UEFI firmware, help me?

  Hi Gilbert,.

  1. What is the brand and model of the computer?

  2. do you have the DVD to install Windows 8 with you?

  UEFI (Unified Extensible Firmware Interface) is a standard interface for firmware for PCs, designed to replace the BIOS (basic input/output system). This standard was created by more than 140 technology companies within the consortium UEFI, y. It is designed to improve the boundaries of interoperability and software address of the BIOS.

  You can view the following for more information Microsoft article.

  What is UEFI?

  http://Windows.Microsoft.com/en-in/Windows-8/what-UEFI

  This error occurs when one of the following conditions is true:

  • The Windows boot manager entry (Bootmgr) is not present in the Boot Configuration data (BCD) store.
  • The Boot\BCD file on the active partition is damaged or missing.

  I suggest you perform the steps mentioned by "P Jessen replied on 10 August 2013" in the material provided.

  Error code: 0xc0000034 in Windows 8 - start of the file Configuration data missing required information

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-system/error-code-0xc0000034-in-Windows-8-boot/15e63631-1f94-473f-83a8-8d7af48a83f7

  Hope this information helps. Response with status so that we can help you.

• Photoshop version 7: how to activate the brush strokes in trails? [was: Legacy Software needs help please]

  I'm still using Adobe Photoshop 7 (yes I know, get with the times and download... etc, etc) and it suits my purposes very well I use it not for commercial have a personal use but simply.

  Anyway, my question is: How can I enable brushes to paths. Can I make a selection and even a channel mask, but a vector path why? Don't not Adobe 7 supports this or have I missed something. Asked the help of files with different subjects repeatedly and vain and someone me clue please. It's probably something simple right...

  

  Maybe this will help:

  1 brush stroke

  2. selection of the the stroke (NOT select all)

  3 convert on the way

  4 Edition > define a custom shape

  5. name of the form

  6. choose the custom shape tool

  7 note the 'shape' in the Options bar

  8 form is the last form in the menu on the right

  8 Opern new file and drag the custom shape. It is the vector