What address info iMessaging uses to communicate between devices?

Similar Questions

• Using Gre Tunnel between devices on the same LAN

  Hello world

  When we need to use the Gre Tunnel on same side means on 2 devices to each other on the LAN?

  Whats is advantage of using GRe Tunnel on LAN?

  Thank you

  MAhesh

  In general, GRE tunnel is not on the same side/network.

  It serves to connect 2 networks and to get through the traffic.

  GRE advantage is that it can participate in routing protocols, then it becomes a little jump through the tunnel instead of several jumps across different devices. As a result, the GRE is also used for tunnel traffic that is not natively supported by these devices where the type not supported traffic cannot pass through.

• iMessage does not sync between iPhone, Mac Mini, MacBook Air

  My main computer is: Mac Mini (mid-2011), El Capitan 10.11.1 (B 15, 42)

  My secondary computer is: MacBook Air (13 inch, mid-2012), El Capitan 10.11.1 (B 15, 42)

  And my iPhone is: iPhone 6 Plus, iOS 9.1 (B 13, 143)

  iMessage used to sync between my iPhone and my computers very well. I was also able to answer incoming calls on my iPhone with computers. It seems that, just at the time I upgraded from Yosemite to El Capitan (or maybe iOS 9.1) synchronization no longer works. I tried pretty much everything I read on the forums, but nothing works. When I go into SETTINGS, MESSAGES and TRANSMISSION of MESSAGE TEXT on my iPhone and select the Mac Mini or MacBook Air, it will activate the program MESSAGES on the computer, but it won't send a code.

  Hello

  Have you tried with Messages on the relevant Mac already started?

  Have you tried signing of the Apple ID on the iPhone > settings > Messages > Send and Receive and effectively reset all?

  

  21:51 Monday; 30 November 2015

   iMac 2.5 Ghz i5 2011 (Mavericks) 10.9
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   a few iPhones and an iPad

• I'm trying to resize the length of the address bar and the search bar. I could before using a 'line' between them to drag to resize. But now this is not s

  I'm trying to resize the length of the address bar and the search bar. I could before using a 'line' between them to drag to resize. But now it's not showing. Any ideas?

  What I have done this; I added a new toolbar, and moved to the research
  window and other things for her. Now I have a LOT OF ROOM

• What happens to iMessage when I use a Sim Card in Europe

  I intend to get a prepaid Sim Card for my iPhone 6 s when I travel in Europe in a few weeks.  I wonder if I still have iMessages since most of the people that iMessage use me my (Verizon) cell phone number.  I get all the iMessages on my iPad and computer laptop too through my e-mail, so I guess that the two e mail and cell number are used by the ap.  In addition, what happens to my iMessage when I come back and turn on my regular sim card?

  You will not be able to get the iMessages as when you put in the new SIM card, your iPhone to record with a new number. You can add e-mail addresses to your address list under which you are reachable, then iMessages sent one of these e-mail addresses.

• What IP address will be used for sending a test e-mail in the express IPS Manager?

  Hi all

  I intend to use the IPS Maine e-mail notification feature.

  There is a question confused me. The test Email can work only half the time, again can't.

  I want to know what IP address will be use for this SMTP connection.  Maybe I used an ACL to allow this traffic.

  Does anyone know what the problem is for this?

  My camera is 5585 X with IPS SSP20.

  Hello

  There should be no blocking communication between the host of the EMI and your SMTP server. Check if the communication is fine.

  Kind regards

  Akshay Rouanet

• What would cause the "from address" info (FA). some emails, downloading the pop3 server, will be replaced by an 'f' 'common '?

  I get multiple research work emails (E/JS) and ecommerce. Some of them have a "Correct".
  'St. Michael Job Assistance Ministry - JAM' FA (SMJAM-JAM).

  For some reason, however, some of the emails from other sources, downloading the verizon pop3, E/JS server are indicated (wrongly) as having the FA SMJAM-JAM above. This situation prevents my email filters to plug these emails to their appropriate mail folder.

  Also, when the steps in order to transmit emails showing incorrect information of FA SMJAM-JAM, the e-mail is no longer present incorrect information of FA SMJAM-JAM but shows rather the correct information of FA that had been specified on the verizon pop3 server.

  address ROM"(FA) in some emails, when downloading from the pop3 server, is replaced by a 'common' 'FA '. [email protected]

  What would cause the "from address" info (FA). some emails, downloading the pop3 server, will be replaced by an 'f' 'common '?

  Hello

  If I understand your problem, I think it may have to do with the addresses stored in your address book. Thunderbird can display the name of your address book instead of the name of the post office, where corresponds to the e-mail address.

  Check your address books to see if you have a bad entry for mail addresses get listed wrong.

  Also check under Tools-> Options-> advanced-> reading & display if you have checked the option to see show it only the names of the people in my address book. If you uncheck this option, the name and the address must be...

• What is the best way to communicate my displeasure with new features?

  TL; How can Dr. I complain to FireFox on the new search bar in new tabs? (Or other news)

  I saw a question or two about this new feature here already, and it is obvious that the developers of FireFox are not really interested in what their users think of this feature.

  The function I want to talk about is the new search bar in the new tab.

  I tried a fix mentioned in a previous post (create a subdirectory "Chrome" and create a CSS file that contains commands to specific style) and it did not work. I tried a few other corrections mentioned on other websites as well, does not.

  Knowing that FireFox would add something like this without allowing an option to disable it is pretty discouraging. I've been enjoying my daily use of FireFox on other browsers that I had used in the past because they were crowded and unclean, and FireFox was not at the time. This search bar ruined who. My pinned tabs were crushed about half of their original size, and the search bar is unsightly, at best.

  Correct me if I'm wrong, but don't we already have a search at the top of the screen bar? I don't see any purpose in this area, except in the gene users. If there is another use, please inform me (although to be completely honest, it will not change my opinion here, although it can mitigate the damage)

  Still, there have been very few features in FireFox that I was unhappy, and each of them was immediately followed by an add-on to turn them off (or they came with an option to disable their release)

  I'm not here asking for help on how to remove the search bar, I plead here for a link that I can use to communicate directly to the developers of FireFox to my opinions about this update.

  On a third party site, I read an article that made one of the developers made mention of an option for users to disable this search bar... According to the article, he has never received response.
  Which reminds me, if FireFox won't listen to his own team, we expect they are listening?

  I'm pretty close simply leaving FireFox because of this feature, because now it is little better than what I have left in the past. PaleMoon was nice, although a little more slowly.

  I'm not saying I'll stop using FireFox, only I'm quite put out because of what I read and the lack of an option to disable this feature.

  If such an option exists already, please give me instructions on how to do it and then well want to ignore this request.

  Thank you for taking the time to read this and have a nice day.
  Dillon P.

  R.E. - newTab search bar

  My guess is that by Firefox 34 or 35, the search bar in the Navigation toolbar won't go away. But before that, some kind of 'widget' should be added to allow the user to choose between their search engine installed various plugins.

  After all, how many places should a user have a 'search bar '?
  Why waste space on the navigation bar when the user can 'search' in the address bar and the subject: House and about: newtab pages.

  Create a text file named userContent.css and who put in the newly created folder /chrome/ in the profile folder.

  @-moz-document url(about:newtab) {
    #newtab-search-container, #newtab-search-logo
    { display:none !important; }
    }
  

  You can also use these do Firefox "user mods:

  -Elegant
  https://addons.Mozilla.org/en-us/Firefox/addon/stylish/

  ChromEdit or more.
  http://webdesigns.MS11.NET/chromeditp.html

• Configure Apache HTTP Srvr for WLS12c error - "address already in use: make_sock: could not bind to address 80.

  Hello the Experts of Oracle.

  I already have

  1. installed the Apache HTTP Server (with libraries)
  2. Downloaded the Plugin of Apache WLS12c
  3. copied the plugin files into the appropriate directories.
  4. Modify the httpd.conf (see below)

  At the present time, I try to start the Apache HTTP server and runs in an unexpected error.

  WHY APACHE ATTEMPTS TO LISTEN ON PORT 80. ?  I've SPECIFIED the PORT 8888

  Question: How to go beyond the error.   -| "Address already in use: make_sock: could not bind to address 80 '

  My server is 192.168.1.21.  In my view, that it has ESTABLISHED processes.  Yet, he reports, that it cannot start.

  

  Here is the content of the httpd.conf file.  My customizations are in Red.

  #

  # This is the main Apache HTTP server configuration file.  It contains the

  configuration directives # that give the server its instructions.

  See # < URL: http://httpd.Apache.org/docs/2.4/ > for more information.

  # See especially

  # < URL: http://httpd.Apache.org/docs/2.4/mod/directives.html >

  # for an analysis of each configuration directive.

  #

  # Do NOT simply read the instructions here without understanding

  # what they do.  They are there only as advice or reminders.  If you do not know

  # consult the online documentation. You have been warned.

  #

  # Configuration and logfile names: If the file names that you specify for a lot

  number of files in server control begin by "/" (or "drive: / 'for Win32 '), the

  # server uses this explicit path.  If filenames do * not * start

  # with "/", the value of ServerRoot directive is preceded by - both "logs/access_log".

  # with ServerRoot set to "/ usr/local/apache2" will be interpreted by the

  # Server as "/ usr/local/apache2/logs/access_log", considering that "/ logs/access_log".

  # will be interpreted as "/ logs/access_log".

  #

  # ServerRoot: The top of the directory under which the server tree

  # configuration, error and the log files are kept.

  #

  # Do not add a bar slash at the end of the directory path.  If you point

  # ServerRoot to non-local disk, remember to choose a local drive on the

  # Directive Mutex, if based on mutex files are used.  If you want to share the

  # ServerRoot even for several demons httpd, you will need to change to

  # PidFile less.

  #

  ServerRoot "/ usr/local/apache2.

  #

  # PidFile: The file in which the server should record its process

  ID # when it starts.

  #

  PidFile ' / usr/local/apache2/logs/httpd.pid '.

  #

  # Mutex: Allows you to set the mutex mechanism and the mutex file directory

  # for individual mutex, or change the default global values

  #

  # Uncomment and change the directory if mutexes are based on files and the default

  # mutex file directory is not on a local disk or is not suitable for some

  # other reason.

  #

  # Default Mutex: newspapers

  #

  # Listen: Allows you to bind Apache to specific IP addresses and/or

  ports #, instead of the default value. See also the < VirtualHost >

  directive #.

  #

  # Change this to listen on specific IP addresses below for

  # prevent Apache glomming on all related IP addresses.

  #

  # Example-> look 12.34.56.78:80

  # Listen api.astcorporation.com:8001

  Listen 8888

  #

  # Dynamic Shared Object (DSO) Support

  #

  # To be able to use the features of a module that was built as a DSO you

  # duty place corresponding 'LoadModule' lines at this location until the

  # directives that it contained are actually available _avant_, that they are used.

  # Modules statically compiled (those listed by "httpd-l") is not necessary

  # to be responsible here.

  #

  # Example:

  # LoadModule foo_module modules/mod_foo.so

  #

  LoadModule authn_file_module modules/mod_authn_file.so

  #LoadModule authn_dbm_module modules/mod_authn_dbm.so

  #LoadModule authn_anon_module modules/mod_authn_anon.so

  #LoadModule authn_dbd_module modules/mod_authn_dbd.so

  #LoadModule authn_socache_module modules/mod_authn_socache.so

  LoadModule modules/mod_authn_core.so authn_core_module

  LoadModule modules/mod_authz_host.so authz_host_module

  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module

  LoadModule modules/mod_authz_user.so authz_user_module

  #LoadModule authz_dbm_module modules/mod_authz_dbm.so

  #LoadModule authz_owner_module modules/mod_authz_owner.so

  #LoadModule authz_dbd_module modules/mod_authz_dbd.so

  LoadModule modules/mod_authz_core.so authz_core_module

  LoadModule modules/mod_access_compat.so access_compat_module

  LoadModule auth_basic_module modules/mod_auth_basic.so

  #LoadModule auth_form_module modules/mod_auth_form.so

  #LoadModule auth_digest_module modules/mod_auth_digest.so

  #LoadModule allowmethods_module modules/mod_allowmethods.so

  #LoadModule file_cache_module modules/mod_file_cache.so

  #LoadModule cache_module modules/mod_cache.so

  #LoadModule disk_cache_module modules/mod_cache_disk.so

  #LoadModule cache_socache_module modules/mod_cache_socache.so

  #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so

  #LoadModule socache_dbm_module modules/mod_socache_dbm.so

  #LoadModule socache_memcache_module modules/mod_socache_memcache.so

  #LoadModule macro_module modules/mod_macro.so

  #LoadModule dbd_module modules/mod_dbd.so

  #LoadModule dumpio_module modules/mod_dumpio.so

  #LoadModule buffer_module modules/mod_buffer.so

  #LoadModule ratelimit_module modules/mod_ratelimit.so

  LoadModule modules/mod_reqtimeout.so reqtimeout_module

  #LoadModule ext_filter_module modules/mod_ext_filter.so

  Request_module modules/mod_request.so #LoadModule

  #LoadModule include_module modules/mod_include.so

  LoadModule modules/mod_filter.so filter_module

  #LoadModule substitute_module modules/mod_substitute.so

  #LoadModule sed_module modules/mod_sed.so

  Modules/mod_deflate.so deflate_module #LoadModule

  LoadModule mime_module modules/mod_mime.so

  LoadModule log_config_module modules/mod_log_config.so

  #LoadModule log_debug_module modules/mod_log_debug.so

  #LoadModule logio_module modules/mod_logio.so

  LoadModule env_module modules/mod_env.so

  #LoadModule modules/mod_expires.so expires_module

  LoadModule headers_module modules/mod_headers.so

  #LoadModule unique_id_module modules/mod_unique_id.so

  LoadModule setenvif_module modules/mod_setenvif.so

  LoadModule modules/mod_version.so version_module

  #LoadModule remoteip_module modules/mod_remoteip.so

  #LoadModule modules/mod_proxy.so proxy_module

  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule

  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule

  Modules/mod_proxy_http.so proxy_http_module #LoadModule

  #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so

  #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so

  #LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so

  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so

  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule

  #LoadModule proxy_express_module modules/mod_proxy_express.so

  #LoadModule session_module modules/mod_session.so

  #LoadModule session_cookie_module modules/mod_session_cookie.so

  #LoadModule session_dbd_module modules/mod_session_dbd.so

  #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so

  #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so

  #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so

  #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so

  #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so

  LoadModule modules/mod_unixd.so unixd_module

  #LoadModule dav_module modules/mod_dav.so

  LoadModule status_module modules/mod_status.so

  LoadModule autoindex_module modules/mod_autoindex.so

  #LoadModule info_module modules/mod_info.so

  #LoadModule cgid_module modules/mod_cgid.so

  #LoadModule dav_fs_module modules/mod_dav_fs.so

  #LoadModule vhost_alias_module modules/mod_vhost_alias.so

  #LoadModule modules/mod_negotiation.so negotiation_module

  LoadModule modules/mod_dir.so dir_module

  #LoadModule actions_module modules/mod_actions.so

  Modules/mod_speling.so speling_module #LoadModule

  #LoadModule userdir_module modules/mod_userdir.so

  LoadModule alias_module modules/mod_alias.so

  #LoadModule rewrite_module modules/mod_rewrite.so

  # Added on 23/09/2015 | -enabling reverse proxy requests for users of WLS12c

  LoadModule modules/mod_wl_24.so weblogic_module

  < IfModule unixd_module >

  #

  # If you want httpd to run as a different user or group, you must run

  # httpd as root initially and it will pass.

  #

  # Group / user: the name (or #number) of the user/group to run httpd as.

  # It is generally advisable to create a dedicated and aggregatable for user

  # httpd, as with most system services are running.

  #

  Demon of the user

  Daemon group

  < / IfModule >

  Server configuration # 'hand '.

  #

  # The directives in this section implement the values used by the 'hand '.

  # Server, which meets all demands that are not managed by a

  definition of # < VirtualHost >.  These values also provide defaults for

  # all < VirtualHost > containers you can set later in the file.

  #

  # All these directives may appear inside containers < VirtualHost >,.

  # in which case the value default parameters will be substituted for the

  virtual host of # being defined.

  #

  #

  # ServerAdmin: Your address, where problems with the server should be

  # e-mail.  This address appears on some generated by the page server, such

  # as error documents.  for example [email protected]

  #

  ServerAdmin [email protected]

  #

  # ServerName gives the name and the port used by the server to identify itself.

  # This can often be determined automatically, but we recommend that you specify

  # explicitly to avoid problems during startup.

  #

  # If your host doesn't have a registered DNS name, enter its IP address here.

  #

  Servername 192.168.1.21

  #

  # Deny access to the whole of the file system of your server. You must

  # explicitly allow access to web content directories in other

  blocks of # < directory > below.

  #

  < directory / >

  AllowOverride none

  Need all refused

  < / Book >

  #

  # Note that, from this point forward you must precisely enable

  features special # to be enabled - so if something doesn't work not as

  # you might expect, make sure that you have specifically enabled it

  # below.

  #

  #

  # DocumentRoot: The directory you are going to use your

  documents #. By default, all requests are taken from this directory, but

  aliases and symlinks # can be used to point to other locations.

  #

  DocumentRoot "/ usr/local/apache2/htdocs.

  < directory "/ usr/local/apache2/htdocs" >

  #

  # Possible values for the Options directive are "None", "All."

  # or any combination of:

  # Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

  #

  # Note that "MultiViews" must be named * explicitly *-'all Options '.

  # is not give it to you.

  #

  # The Options directive is complex and important.  Please see

      # http://httpd.Apache.org/docs/2.4/mod/core.HTML#options

  # For more information.

  #

  Options Indexes FollowSymLinks

  #

  # AllowOverride controls what directives may be placed in .htaccess files.

  # It can be 'All', 'None', or any combination of key words:

  # AllowOverride FileInfo AuthConfig Limit

  #

  AllowOverride None

  #

  # Controls who can get stuff from this server.

  #

  Need of all granted

  < / Book >

  #

  # DirectoryIndex: sets the file Apache will serve if a directory

  # is requested.

  #

  < IfModule dir_module >

  DirectoryIndex index.html

  < / IfModule >

  #

  # The following lines prevent the .htaccess and .htpasswd files to be

  # seen by customers of the Web.

  #

  < files ".ht *" >

  Need all refused

  < / files >

  #

  # ErrorLog: The location of the error log file.

  # If you do not specify an ErrorLog directive in a < VirtualHost >

  # container, error messages related to this virtual host will be

  # logged here.  If you * define an error for a < VirtualHost > log file

  container of #, that host errors will be logged there and not here.

  #

  ErrorLog "logs/error_log".

  #

  # LogLevel: Control the number of messages in the error_log.

  # Possible values include: debug, info, notice, warn, error, crit,.

  # emerg, alert.

  #

  LogLevel debug

  < IfModule log_config_module >

  #

  # The following directives define some nicknames format for use with

  # a directive CustomLog (see below).

  #

  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"

  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune

  < IfModule logio_module >

  # You must enable mod_logio.c use %I and frequency

  "" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio

  < / IfModule >

  #

  # The location and format of the access (Common Log Format) log file.

  # If you do not have any logfiles access set in a < VirtualHost >

  container of #, they will be saved here.  On the other hand, if you * do *.

  # define per - < VirtualHost > access logfiles, transactions will be

  # logged there and * not * in this file.

  #

  CustomLog "logs/access_log" common

  #

  # If you prefer a log file of access, agent, and referer information

  # (Combined logfile format) you can use the following directive.

  #

  #CustomLog "logs/access_log" combined

  < / IfModule >

  < IfModule alias_module >

  #

  # Redirect: Allows to tell clients the documents used for

  # exist in your server's namespace, but no more. The customer

  # make a new request for the document at its new location.

  # Example:

  # Redirect permanent/foo http://www.example.com/bar

  #

  # Alias: Maps web paths into paths of file system and is used to

  # access content that don't live under the DocumentRoot directive.

  # Example:

  # Alias /webpath/full/filesystem/path

  #

  # If you include a trailing / on /webpath, then the server will be

  # require that he be present in the URL.  It is also likely that

  # duty provide a < Directory > section to allow access to

  # the path to the file system.

  #

  # ScriptAlias: This controls which directories contain server scripts.

  # ScriptAliases are essentially the same as assumed names, except that

  # documents in the target directory are treated as applications and

  # executed by the server on demand, rather than as documents sent to the

  client of #.  The same regulation on flight "/" applies to the ScriptAlias

  # as for the Alias directives.

  #

  ScriptAlias/cgi-bin / "/ usr/local/apache2/cgi-bin /".

  < / IfModule >

  < IfModule cgid_module >

  #

  # ScriptSock: On threaded servers, refers to the access path to the UNIX

  decision # used to communicate with the CGI mod_cgid daemon.

  #

  #Scriptsock cgisock

  < / IfModule >

  #

  # "/ usr/local/apache2/cgi-bin" just need to replace your ScriptAlias

  # CGI directory exists, if you have set up.

  #

  < directory "/ usr/local/apache2/cgi-bin" >

  AllowOverride None

  None of the options

  Need of all granted

  < / Book >

  < IfModule mime_module >

  #

  # TypesConfig points to the file containing the list of mappings from

  # MIME file extension - type.

  #

  TypesConfig conf/mime.types

  #

  # AddType allows you to add or replace the MIME configuration

  # the file specified in TypesConfig for specific file types.

  #

  #AddType application/x-gzip .tgz

  #

  # AddEncoding allows you to have certain browsers uncompress

  # information on the fly. Note: Not all browsers support this.

  #

  #AddEncoding x-compress. Z

  #AddEncoding x-gzip .gz .tgz

  #

  # If the AddEncoding directives above are commented out, then you

  # should probably define these extensions to indicate media types:

  #

  AddType application/x-compress. Z

  AddType application/x-gzip .gz .tgz

  #

  # AddHandler allows you to map certain "manipulators": file extensions

  # No actions associated with the file type. It can be either integrated into the server

  # or added to the directive of the Action (see below)

  #

  # To use CGI outside of ScriptAlias directories scripts:

  # (You will also need to add "ExecCGI" to the "Options" directive.)

  #

  #AddHandler cgi-script .cgi

  # For maps of type (negotiated resources):

  #AddHandler type-plan of the var

  #

  # Filters allow you to process content before sending it to the client.

  #

  # To parse .shtml for server-side includes (SSI) files:

  # (You will also need to add "Includes" the "Options" directive.)

  #

  #AddType text/html .shtml

  #AddOutputFilter INCLUDES .shtml

  < / IfModule >

  #

  # The mod_mime_magic module allows the server to use various boards of the

  content of the file itself to determine its type.  The MIMEMagicFile

  # directive tells the module where the definitions of suspicion.

  #

  #MIMEMagicFile conf/magic

  #

  # Customizable error responses come in three flavors:

  ((# 1) text 2) local redirects 3) external redirects

  #

  # Examples:

  #Error Document 500 "The server made a boo boo".

  #Error Document 404 Missing.html

  #Error Document 404 "/cgi-bin/missing_handler.pl"

  #Errordocument 402 http://www.example.com/subscription_info.html

  #

  #

  # MaxRanges: Number of channels in a Maximum request before

  # return the resource, or one of the extraordinary

  # values 'default', 'none' or 'unlimited '.

  # Default is to accept 200 beaches.

  Unlimited #MaxRanges

  #

  # EnableMMAP and EnableSendfile: on systems that support.

  projection in memory # or the sendfile syscall can be used to deliver

  # files.  Usually, this improves the performance of the server, but must

  # turn off when mounted network is served

  # file systems or if support for these functions is also

  # broken on your system.

  # Default: EnableMMAP, EnableSendfile Off

  #

  #EnableMMAP off

  #EnableSendfile on

  # Additional configuration

  #

  # The configuration files in the conf/extra/directory can be

  # included to add additional features or change the default configuration

  # the server, or you can simply copy their content here and change as

  # necessary.

  # Server-pool management (MPM specific)

  #Include conf/extra/httpd-mpm.conf

  # Multilingual error messages

  #Include conf/extra/httpd-multilang-errordoc.conf

  # Entries to the fancy directory

  #Include conf/extra/httpd-autoindex.conf

  # Language settings

  #Include conf/extra/httpd-languages.conf

  # User directories

  #Include conf/extra/httpd-userdir.conf

  # Info in real time on the applications and configuration

  #Include conf/extra/httpd-info.conf

  # Virtual hosts

  #Include conf/extra/httpd-vhosts.conf

  # Local access to the manual for the Apache HTTP Server

  #Include conf/extra/httpd-manual.conf

  # Distributed authoring and versioning (WebDAV)

  #Include conf/extra/httpd-dav.conf

  # Various default settings

  #Include conf/extra/httpd-default.conf

  # Configure mod_proxy_html to understand HTML4/XHTML1

  < IfModule proxy_html_module >

  Include the conf/extra/proxy-html.conf

  < / IfModule >

  # Secure connections (SSL/TLS)

  #Include conf/extra/httpd-ssl.conf

  #

  # Note: The following text should be present to support

  # start without SSL on platforms without equivalent/dev/random

  but # a statically compiled in mod_ssl.

  #

  < IfModule ssl_module >

  SSLRandomSeed startup builtin

  SSLRandomSeed connect builtin

  < / IfModule >

  #

  # Uncomment on the below to deal with user agents that deliberately

  # violate open standards by abusing DNT (DNT * must * be a specific)

  choice of end-users #)

  #

  # < IfModule setenvif_module >

  #BrowserMatch "MSIE 10.0"; bad_DNT

  # < / IfModule >

  # < IfModule headers_module >

  #RequestHeader unset DNT env = bad_DNT

  # < / IfModule >

  #= WLS 12 c routing Configuration. Seven 2015 =.

  # Added to fix the mistakes of transport of myAST resulting from the use of deprecated SSL 2.0 Mobile Security.

  # The following has been added to activate the reverse proxy requests from users of WLS 12 c-based applications.

  #-8002 port = SSL listener for api.astcorporation.com (managed server)

  # - the port 443 = SSL listener for myast.astcorporation.com (managed server)

  #

  # Phases of deployment:

  API.astcorporation.com:8001/myast # (1).

  # VirtualHost (2) Setup / WeblogicCluster guidelines to register myast.astcorporation.com:443

  # 3-test api & myast

  # 4-regenerate private certificate + all certificates.

  # Minimum nonclustered directive specifies WebLogic IP + port.

  < IfModule mod_weblogic.c >

  WebLogicHost 192.168.1.43

  WebLogicPort 8002

  Debugging now

  DebugConfigInfo WE

  Newspapers/myAst12c_WLS_error_log WLLogFile

  WLS-JSESSION-ID WLCookieName

  < / IfModule >

  # Proxy request per path Note: SetHandler specifies the handler for the plug-in module for the Apache HTTP Server

  < /myast location >

  SetHandler weblogic-Manager

  ErrorPage http://www.astcorporation.com/services/middleware/Middleware_Services.html

  < / location >

  # Added proxy

  ProxyPreserveHost off

  #ProxyPass /api http://API.astcorporation.com:8001 / myast

  #ProxyPass /myast http://myast.astcorporation.com

  I found my answer after I posted.  I'll leave it here to help others...

  The list of all instances of Apache that were started

  • ' ps - ef | grep apache. "

  Kill the persistent process

  

• Communicate between extension html and c ++ plugin

  Hi all

  I'm developing an extension html for InDesign CC2014. There is a scenario where I need to communicate between the extension and the C++ InDesign plugin.

  I followed the instructions at http://wwwimages.adobe.com/content/dam/Adobe/en/devnet/cs-extension-builder/pdfs/CC_Extens ion_SDK.pdf and wrote on the extension of the code part. The part c ++ code has not changed since the Flex versions, so no problems there.

  I tried to call the extension of the plugin and it worked. I recorded an event in the plugin to listen to and sent another event of the plugin. But the Committee does not seem to listen to or distribute any type of event. On the part c ++ plugin, the error of registration codes and send returned were codes of success, so the problem is not with the plugin.

  Here's the code for the html Panel,

  I save the event to listen to at the time of the loading of the page.

  function onLoaded() {
      var csInterface = new CSInterface();
  
   // Register the named event handler
    csInterface.addEventListener("com.mypluginevent.test", myEventHandler); 
  
  }
  //Create a named event handler callback function
  function myEventHandler(event)
  {
    alert("Event captured!");
  }
  
  // This function is called on a button click
  function onClick()
  {
    // Create your local CSInterface instance
    var csInterface = new CSInterface();
    var event = new CSEvent("com.myhtmlevent.test", "APPLICATION"); 
  
    event.data = "This is a test!";
    csInterface.dispatchEvent(event);
  }
  

  Here's the part C++ code where I send the event "com.mypluginevent.test".

  csxs::event::Event event = {"com.mypluginevent.test",
                                csxs::event::kEventScopeApplication,
                                "myEventHandler",
                                NULL,
                                NULL};
  
  csxs::event::EventErrorCode err = sdkPlugPlugInstance.DispatchEvent(&event);
  

  I always get a hit on the dispatch of the event, but the extension intercepts her.

  Can someone tell what I am doing wrong?

  Hello

  I don't know if it will help but take a look at the documentation for CC 2014 (rather than the CC 2013 docs you use): official Adobe Extension SDK Documentation for 2014 CChttp://adobe.ly/1rin38t>

  Best regards

  Hallgrimur

  --

  René Hallgrímur | Product Manager Adobe EAC | @HallgrimurTh

• What is required to use a headset Logitech h110 with a Mac Mini?

  I plugged in two different Logitech h110 helmets to the Mac mini. One of them is brand new from its packaging.

  Nor, we record the entry levels of the microphone of the headset, as indicated on the screen Preferences sound.

  Other applications are also any audio input either.

  What is required to use a headset Logitech h110 with a Mac Mini?

  http://www.Amazon.com/STARTech-com-headsets-separate-headphone-microphone/DP/B00 4SP0WAQ/ref = pd_bxgy_147_img_2? ie = UTF8 & refRID = 0J342KYWVKRQFFXA4WPY

  It will also depend on the model of your MacMini, info provided you no, only the most recent models can use this type of adapter.

  You have purchased helmets designed for s PC not Mac.

• Using variables shared between the different versions of labview

  Hello

  I look at the use of variables shared between two different versions of LabVIEW. We have a 2 of the PXI system and a single PC. We are currently updating the code on the PXI system to 2014, but the PC still work 8.2.1. We now need a map of ARINC-429, which is executed only 2009 +, that is why we are to day. First tests show that shared variables do not communicate between the two. I think that the reason may be that the PXI running the version of variable motor 2014 shared, while the PC is running 8.2.1, but I don't know if it is precisely for this reason it does not work. Is there a way to communicate between two different versions of LabVIEW with shared Variables?

  Thank you!

  SOLUTION

  There are two key elements in the process of installing software that are essential for PXI to communicate with another version of LabVIEW: Legacy Server Support Variable and Variable Support of Legacy Protocol. The first, in charge of the Protocol, was automatically installed through the selection of the other ingredients (although I do not know which triggered its installation). The second has been nested in the Protocol, but was not selected automatically.

  

  

  The Protocol allows the PXI 2014 connect to shared variables hosted by devices 8.6 or an earlier versions, while the server allows before 2009 devices to communicate to shared variables hosted on PXI of 2014 (which was the initial problem)!

• What do you guys use of speed controls

  Hi all

  I have swpped my D - Link DIR-855 for a Linksys EA6500 and you want to check the overall speed.

  I use in my network devices as well as WiFi. I guess that speed controls should show the difference between wired devices, the devices connected to the Wifi or WiFi on a device of current line. www.Speedtest.NET does not seem to show this difference.

  What do you use to show the difference between LAN to the internet or LAN to NAS connection speeds?

  Kind regards

  Ruud

  You can try www.smallnetbuilder.com for various articles on the verification tests.

  http://www.SmallNetBuilder.com/lanwan/lanwan-basics/31220-how-fast-is-your-network-five-ways-to-MEAs...

• Can I find out what OS is being used by a device...

  Can I find out what OS is being used by a device if I don't know what version of java is used?

  in other words, is there a table that indicates which version of java used in each version of the os?

  Thank you

  The place for this info is in the HTTP User-Agent header.

  If you look at a trace from the BB browser hit a web site, you will see how it is formatted.

  Excerpt from the KB article:

  The server that hosts the application can examine these headers to get the necessary information. The User-Agent header supplied by the browser is in the format: BlackBerry/. For example, BlackBerry8800/4.2.1.

  http://supportforums.BlackBerry.com/T5/Java-development/develop-applications-for-different-BlackBerr...

• How does Card Crypto knows what ISAKMP policy to use?

   ip access-list extended ACL_SITE1_TO_SITE2 permit ip 10.0.12.0 0.0.0.255 10.0.22.0 0.0.0.255 ! crypto isakmp policy 10 encr aes hash sha256 authentication pre-share group 14 crypto isakmp policy 20 encr aes 256 hash sha512 authentication pre-share group 16 crypto isakmp key cisco123 address 200.0.2.2 ! crypto ipsec transform-set [TRANS_SET]PHASE_2 esp-aes esp-sha256-hmac mode tunnel ! crypto map [CRYPT_MAP]VPN_SITE1_TO_SITE2 11 ipsec-isakmp set peer 200.0.2.2 set transform-set [TRANS_SET]PHASE_2 match address ACL_SITE1_TO_SITE2 ! interface FastEthernet0/0 ip address 200.0.1.1 255.255.255.0 crypto map [CRYPT_MAP]VPN_SITE1_TO_SITE2

  How does Card Crypto knows what ISAKMP policy to use, or use of the ISAKMP policy at all?

  It comes from "ipsec-isakmp?

  I mean... I do not see any "set isakmp policy 10" in the Crypto map

  This is what he chooses just the top-down approach?

  As part of the negotiation of the phase 1 and is a top-down proposal based on the sequence number.  You can get the details in tunnel using configuration:

  Debug crypto ISAKMP

  Cisco IOS has built/strategies default ISAKMP, but the pre 15.x versions were terrible default.  New default values are strong, although I still like to configure them myself.