restoration of original image

Similar Questions

• When Lr Mobile sharing it restores the original image?

  When Lr Mobile sharing it restores the original image?

  as the FAQ says Lightroom mobile synchronizes original JPEG, PNG and video files captured by your mobile device in the creative cloud. Lightroom desktop creates and synchronizes the images in the cloud in the form of intelligent insights. Smart insights are more small versions of your files in origin, roughly 1.5 or 2 MB in size, that hold all the flexibility of a raw file. Changes to chip previews automatically synchronize with your originals. The original files remain on your desktop and are not stored, synchronized or used by Lightroom for mobile. As a result, Lightroom for mobile should not be used as a backup service.

  When I save a photo from Lr Mobile on my phone he uses this intelligent overview of 2 MB right? What did this to my original data and things like that.

  Hi Chrizly,

  If the time that you synchronize the images of the Lr Mobile Lr Office, the original image will remain on your phone, but Lightroom will create smart image previews.

  The data remains the same on your phone.

  Kind regards

  Tanuj

• Cannot restore from original image

  Hi there, I bought my pc couple months before windows 8, the other night, that I've upgraded to windows 8. Well although I had problems to couple with laptop, but when I go to the Recovery Manager and select Restore my pc to factory State, windows pc boots 8 troubleshoot screen I click pc to restore the image and I get the error, to recreate the image on your computer with the error code 0 x 80070002 how solve this problem?

  If you burned a DVD recovery value boot from the first disc. If you burn a landline HP to ask for a >Contact HP

• Recovery Manager cannot restore computer using the original image

  Hello

  I'm working on a Pavilion P6000 desktop series (WW639AA).  Windows 7 (64 bit) does not load as it seems that his score is corrupt. I ordered a new restore disc (and additional floppy) HP to restore the hard disk.  I tested the hard drive and all past.  However, when I run the Recovery Manager and try to restore the computer, I get the following error:

  «Recovery Manager cannot restore you computer using the original image.»  Contact HP support.  ' Error #0xe0ef000e.

  All of the suggestions.

  Thank you.

  blewettjl,

  A disk that has been 'cleaned' will have this error with HP rated DVD.

  HP has a patch, called CyberLink Recovery disk utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-80183-1&cc=us&lc=en&dlc=en

• Pavilion 5000: need assistance to restore the computer to the original image

  I tried to rset original image using the Recovery Manager and the restore disks that I did when I bought the computer from the computer.  I get a message at the end everything that said ERROR Code OxeOef0003 I have no idea how to go beyond this.  Can someone help me?  I'm not blonde, but not very techno...

  It seems that your hard drive has gone wrong and that it should be replaced.

  If you intend to change it yourself be sure to get the same size more and not the format of the AF.

  How to replace the hard drive.

• What should I do if I lost my vista CD when I want to restore to the original image?

  What should I do if I lost my vista CD when I want to restore to the original image?

  Hello

  Vista came preistalled please contact your computer manufacturer, and then request to send you replacement discs.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  See you soon.

  PS You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista must be installed. The product key determines which Edition is installed.

  Builders recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

• How to restore the original size placed and mounted the image?

  If a picture is placed on the frame, mounted on it, saved file. When I open it again, is there a way to restore the original size of the image?

  Thanks in advance for any help.

  Vera

  Click on the image with white pointer/selector and set the size of the image at 100%

• After the system recovery complete original image

  Win 7 Desktop was unstable after a few years, and I wasn't able to run a successful restoration to any number of restore points, so just yesterday, I backed it up and ran the recovery of the system of internal recovery option in the Recovery Manager and not from disks.

  The process was nice and smooth, but in 'My computer', I noticed that my original image on the D drive already appears almost complete and wonder if this is the case?

  It shows only 327 MB 10.7 GB free space.

  My concern is it will be full in no time and leaves no room for new info in case it is always necessary.

  So my question is, or the original image is correct as this is what I have to do something now, even if it means another recovery?

  Thanks for the tips

  You are the very welcome

  Happy computing!

  Jaco

• I acidently hurry restoring factory Dell Image and it deleted all my photos and my data, is there a way I can get back them?

  Should I go to a professional for help?

  You are, without doubt, is not going to be able to recover anything.  When you restore it, it erases the hard drive and replace all of the content with the original image.  It is possible, but little likely, that some records could be retrieved using a utility like Recuva (http://www.piriform.com/recuva) or use a professional recovery service but anyway, the right thing to do is to turn the computer off and let it off - every second it's on the chances of recovering files gets less and less.

• original image D only 599 MB of 8.5 GB and showing a red capacity indicator

  Hello

  the configuration of the audit Panel, I noticed that factory image (D :) showed red disk volume indicator, the screen said 599 MB of free space with a capacity of 8.5 GB.   Is this what can I do to get more space, to be honest I don't know what the drive stores.

  This is used if you ever want to restore your computer to how it was when you bought it. You should not try to store all files into it.

  If you have not deliberately saved all of the files on this subject, you can ignore the fact that he blushed. If you suspect that something has been stored on it, you can use this HP article, by replacing references to the recovery of the original image.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c01508532&LC=en

  Do not delete any files unless you know exactly what they are, or you will lose the ability to restore your computer to factory settings.

• D drive... ORIGINAL IMAGE... HEWLETT-PACKARD

  Can someone tell me what the "D" drive is on my new HP computer?  It is said to use it to 'restore factory settings'... but that is as far as I know.

  Should I really to it, i.e. the entire disk.

  Thank you

  FLKulchar

  FLKulchar

  I have that remove this partition, you lose the ability to restore Windows 7 in the way it was when you first turned on the computer. It would be considered a method of the module fail safe to reinstall Windows 7 all other methods will stop working.

  The partition of the original Image must take a very small amount of your entire hard drive space.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• I opened a picture with preview and all pixels become white. Is it possible to recover the original image?

  I just opened the photo and every pixel in it became white. There is no way to return to a previous version of the image, as if she had initially being that color. The size of the image remains the same, but each pixel is white.

  This is the second time that's happened, but the previous one, I was able to recover the deleted original file on my SD card, which is not an option at this time.

  I would like to know if there is an app or option on Preview that allows me to recover the original image.

  White preview screen glitch

  back-

  

• Photos lost track of the original images

  I bought Aperture (my equivalent in local currency of 299 USD), then after that Apple stopped supporting the opening, I migrated to Apple pictures. Just today, I found that more than 500 photos imported from April 2016 are now show as zero KB in the Inspector. The original seem inaccessible to the Photos. The editing mode does not come when I click on 'Edit' and when I zoom to 100%, the image is rasterized.  I cannot determine the cause of this, but managed to find the original images on my drive, in the files managed by the pictures, and themselves do not appear to be corrupt. It seems that the pictures or its metadata the library software is broken. I tried to restart my Mac and the repair of the library three times (starting Photos while pressing the cmd and alt keys). That did not work. Please can you help me?

  In Photos preferences you have unchecked the preference for 'copy items imported to the photo library' (library management and the default and very highly recommended) or you have disabled this preference (a referenced library and strongly discouraged)

  How you import these photos and what? What format are they?

  LN

• iTunes has changed the order of songs on an album. How to restore the original order?

  I have a classic album. iTunes has changed the order of the songs. How to restore the original order?

  Order of songs is controlled by the number of drive and the beaches. Set them accordingly.

  TT2

• Qosmio X 870 - 13p - how to restore the original key elements?

  Use the volume buttons + /-on the keyboard, I just had to push for example to increase the volume of your PC or put a song on a break. Now it does not work, I have to press the "Fn key" to use these keys.

  If anyone has an idea how to restore the original key elements?

  There are two options for the mode of function keys:
  -special function mode (you don't need to press the FN key n)
  -standard mode of F1 - F12

  Please check which option is set to your laptop.
  You can find it when you open the office assist > system settings > keyboard.

  Check and if necessary change the special function mode.