What are the interactive form fields

Similar Questions

• What are the interactions intensive AFCS networked most?

  During the stages of the initial design of a project, it would be useful to know what are the aspects of the AFCS are the most intensive network and perhaps areas more likely to cause delayed responses of collaboration. I ask this because it seems so tempting 'rich' easily accessible through CAA interactions.

  For example streaming video takes a lot of resources, or it keeps track of all the interactions on a whiteboard? What is the transmission of the voice?

  I realize it depends on how many users interact, for example 100 people chatting can take more resources than streaming a videocam. A rough idea would be useful for someone like me who doesn't have a clue what data are transferred in the background. Otherwise I could assume I can chuck each pod enter an application and not expect a smooth - perhaps it would be? I have already mentioned on the forum that I can't personally "You tube show" as an example to initialize completely without crashing my browser.

  Such a list is possible to determine? What a stupid review?

  Well well, audio/video streaming is definitely heavier than e-mail data, how much depends on the level of compression (and the compression/decompression method determines how intensive cpu are these operations).

  The "charge" of e-mail data depends on the load of the message (a cat is pretty much the message from discussion + timestamp + maybe some information from formatting, the user id, whiteboard messages contain position cursor or object, the type of shape, some additional information according to the form, etc.).

  In general, indenpendently of the message, type your load is multiplied by the number of users receiving the message (so a video image sent to 100 people that is 100 times the load of the single message, even for data messages)

  You should be able to run the app dev console and 'examining' messages through. You can see the number of items have different properties (section cat vs white array elements, etc.) and that should give you a good idea of how "heavy", each message is relative to another.

  One thing to say is that unless you create your own articles and, for example, store bitmaps in it, each standard data message payload is small enough to fit in a single packet, TCP/IP, so while they can use more or less bandwidth, they are all "cost" a lot of network.

• What are the security settings to lock a form with fields to fill and still allow someone drive to fill in the fields as as to save the form and print it?

  What are the security settings to lock a form with fields to fill and still allow someone drive to fill in the fields as as to save the form and print it?

  You want to allow someone to open your document and fill in the form (the fields that you have created), but not change or edit the form, right? Here is the answer - assuming you use Acrobat Pro and someone will open the PDF with the Acrobat Reader 9 minimum and more:

  Tools > Protection > encrypt< encrypt="" with="">

  Select YES to change security.

  Opens in a new window:

  Do not select NOT open the Document (or will require a password to open the document.)

  SELECT: Permissions (check the box next to ' Restrict editing and printing of the document. ")

  Change the following 2 settings in the drop-down list box:

  Printing allowed: select high resolution

  Changes allowed: select commenting on, fill in the fields on the form and signature of signature fields
  Selected leave: "enable access text for playback devices to screen for people with visual impairments.

  Change password Permissions (insert a password)

  Leave all the other settings alone in 'Options '.

  OK - OK

  Again enter the Permissions password (the one you entered above)

  OK - OK

  Save the PDF file to apply security [notice that (SECURED0 will appear after the title of the document]

• What are the inner workings of the grid in forms?

  Hi, I have some doubts, I want to know what are the inner workings of the grid in forms.

  1. how forms followed the value change in the grid?

  2. when we run the query that we will get the selected lines, then we changed some values in certain fields in the grid, how it follows the change in value? .how he knows the process is update or insert?

  It is this that my concept, when we realized the request forms will be store values in the tables with rowid.i thought a lot more, but I can't any idea on it.any help me?
  

  You just want to understand the functioning of the forms or you encounter some difficult techniques in certain areas?  If you have a hearing problem, please describe, and we can try to help.  If you try just to know how it all works, I would recommed referring to Forms Builder online help.

  In help, search for information on GET_RECORD_PROPERTY.  This part of the documentation provides a pretty good explanation as to what is happening and how to determine the current state of a folder.

  In short, when you make a change to a field that represents a recording of the db, a SELECT for UPDATE is issued.  This causes the recording to be blocked.  Actually change value, we monitor internally.  I won't go into the details on how we do here.

• What are the options for 3 bit for Hw_Arm_Sel in PCI-6601 field

  Hello

  I'm programming our own driver to operate the PCI-6601. For our application, we need option arms material. I know, it is possible to use 2 counters for this, but NEITHER-TIO also supports hw_arm. Although it is not explained in the registration document at all, after some tedious verification in the DDK examples I found that the pieces are in the Gi register metering mode. I know that the position of the HW_enable as well as the position of the 3 options sellect bits PIN. What I don't know is what are the options of 3 bits for Hw_Arm_Sel field. I contacted the support NEITHER, but received no support. How can NEITHER sell boards and when a customer who doesn't use LAbview or Measurement Studio, or DDK, but implements its own driver is then so arrogant at least of NOR? Also, how can OR publish only a part of the records of the Board of support and when a customer contacts and request for some records do not get supported at all? I can't predict the missing records, and he is professional enough to document comes in part from records of 660 x Instruments. And, upon request, you have nothing.

  I hope that someone from the community are aware of this Hw_Arm_Sel 3 pin option. Otherwise, there is just one option of the error and the trial. Or simply throw away the jury.

  Dr. Kirco Arsov

  Hey, sory for the delay in my response. It works and it works very well with the description of Joe and Joe, thanks for your great help. I greatly appreciate. Now we finally also have this option as we wanted it and it works fine.

• look up NS - what are the domain servers?

  What are the domain servers, host? What does 'mark' when I try to copy and paste? and finally that authority no answer means in the ns-look-up?  Do two addresses expected to match then presented the homepage and answer non, what does everything mean? David StClair

  Hello
  A Windows Server domain is a logical group of computers running versions of Microsoft Windows operating system that share a central directory database. This central database (called Active Directory from Windows 2000 [1], Domain Services Active Directory in Windows Server 2008 and Server 2008 R2, also referred to as NT Directory Services on operating systems Windows NT, or NTDS) contains the user accounts and the security information for resources in this area. Each person who uses computers in a domain receives its own unique account or user name. This account can then be assigned access to resources within the domain.

  In a domain, the directory resides on computers that are configured as "domain controllers." A domain controller is a server that manages all aspects related to security between the user and domain interactions, centralizing administration and security. A Windows Server domain is usually adapted to the companies and/or organizations when more than 10 PCs are in use.

  Working groups Windows, on the other hand, is the other model to group windows computers in a network environment that comes with Windows. Workgroup computers are considered to be 'standalone' - i.e. There is no formal affiliation or the authentication process formed by the working group. A working group has no servers and clients, and as such, it represents the paradigm of Peer-to-Peer network (or from Client to Client), rather than to centralised architecture constituted by Client-Server. Working groups are considered difficult to manage beyond a dozen clients and lack of unique signature, scalability, resilience disaster recovery and many features of security functionality. Working groups of Windows are more suitable for small or office networks home.

  A domain does not refer to a single location or a specific type of network configuration. Computers in a domain can share a physical proximity on a small LAN, or they may be located in different parts of the world. As long as they can communicate, their physical position is irrelevant.

  Active Directory computers within a domain can be assigned in OUs based on location, organizational structure, or other factors. In the area of the original Windows Server machines system (shipped with Windows NT 3.x/4) could only be seen in two States of administrative tools, 1) computers detected (on the network) and 2) computers which were actually in the domain. Active Directory makes it easier for administrators to manage and deploy changes to the network and political (see Group Policy) to all connected machines to the domain.

  Computers can connect to a domain easily via LAN or WAN using a VPN connection. The users in a domain are able to use enhanced security for the VPN connection with the support of a certification authority that is granted when a field is added to a network, and thus the smart cards and digital certificates can be used to confirm the identities and protect the stored information.

• How to create interactive form fields

  Hello

  I am trying to download a PDF forms Central is the message I got:

  Cannot import FormsCentral the document PDF because it does not contain interactive form fields. You must add fields to your PDF using Adobe Acrobat and import again.

  ? How can I fix it and try again?

  I have the original file open, I talk for objects tools / interactive? or choose another header/subject.

  Thank you very much for your help! TY

  Hi rilanab49377272,

  If you have Acrobat, you will use the component shapes on the tools Panel to add interactive form fields to the PDF document. If you do not have Acrobat, you can download a 30 day trial of http://www.adobe.com/products/acrobat.html. To help you get started, here are a few topics help on the use of forms in Acrobat: https://helpx.adobe.com/acrobat/topics/forms.html.

  Best,

  Sara

• What are the benefits should the software Intel offers compared to Win zero configuration

  (Satellite M60, Intel 2200BG)
  A few months ago Intel released new software WLAN (a major problem for the security, etc.). Initially, there was a memory leak problem, but he was soon fixed. However, they always seem to be a resource hog: there is the CPU usage in the Task Manager on the cob of 10 to 20% every 5 seconds all the time, also WIFI turned off & off, overall performance is affected - this can be seen for example in the tests of hard drive.

  I noticed that in order to use windows to configure WLAN & then kill two switching processes (iFramework, S32EvMon (?)) eliminates this activity.
  Recently, new Intel drivers are offered by Toshiba also, so I'm about to reinstall them with the option "drivers only".

  Anyone know what are the benefits should the full Intel software offer compared to Windows zero configuration?
  As far as I know, monitor event S32 is supposed to improve coordination Intel WLAN and LAN, working together.

  The new package is about 50MB in size, while the former was 2MB.

  Hi Sammo

  You have already preinstalled new driver? The package is really about 50 MB and Intel PROSet utility.

  I can tell you that offers software Intel the same configuration options of Windows. Maybe Utility Intel PROSet is friendly and kind but designed WLAN Windows settings by using, you can exactly the same.

  If you have more info on the download package and installation please let us know.

• What are the future plans for Aperture?

  It's simple.  I bought Aperture because iPhoto was not to my needs.  Now Aperture is replaced and the comments there say that Photos doesn't have the tools, I want to be.

  How much time have I not the right to use and download copies of Aperture for my computers?

  What are the plans for the Photos by integrating the features used by those who have paid extra for the opening?

  I'm not a professional photographer, but use a DSLR camera and it's easy to take "too many pictures".  An I take a picture, I keep if the quality is OK.  Records, it does not mean that I want to pay extra to save and it certainly does not mean that I want it on every device I own.  I want to use stars, keywords and projects (this function any name is fine with me) to organize my collection.  I don't want to just find a picture by the date it was taken, but of course, it is the most common research.  I want to have pictures with 2 stars or better in smart folders that I share on my various devices.  I use a smart folder for this today.

  I'm upset that the product has lost support.  I saved the libraries that rely on a programme of work to read (I've lost images in a dark form in the 1990s).  I spent money on a product, expecting to own for many years, but may not be able to download it for a new purchase of computer in 1 year.  I'm not yet sold on the cloud, and that's why.

  I spent money on a product, expecting to own for many years, but may not be able to download it for a new purchase of computer in 1 year.

  Apple has stopped the development of Aperture.  You will be able to use Aperture, as long as you have a computer with an Operarting system which is compatible with aperture.  Don't update your Mac to new versions of the system, unless you know for sure that the new system supports the opening. Don't forget to keep a full backup of your Mac with opening and your version of Mac OS X, so you can revert to this version, if you accidentally updated to a version that does not support opening.

  The Photos.app can open Aperture libraries, so you will always have access to your original images, albums and edited versions. See: How Photos handles content and metadata from iPhoto and Aperture - Apple Support

• What are the dimensions of the ipad2

  What are the dimensions of the iPad 2 that I own.  Can not find them anywhere.  Looks like the iPad 2 of the same size?

  iPad 2 Air care http://www.apple.com/ipad-air-2/specs/

  iPad 2 form https://support.apple.com/kb/sp622?locale=en_US

  They are not the same size.

  -AJ

• What is the difference between AXIEM and EMSIght? What are the benefits of AXIEM by EMSight if any?

  I wonder what are the differences between AXIEM and EMSight. Are associated with application? One is better than the other? Please explain.

  AWR estimated AXIEM most powerful plan EM Simulator around.   AXIEM is at the center of continuous research and improvement, while EMSight is only worked on if revealed serious flaws.  Here is a summary of the differences:

  Mesh

  • EMSight must mesh the nearest grid drivers using rectangles.  This causes the mesh to have more elements mesh when there are small and large geometries.  The grid should be small enough to capture the small geometry but then causes large geometries to mesh more.   In addition, angled or curved structures causes inefficiencies mesh.
  
  
  • AXIEM STS forms, rather than a grid.  In addition, the mesh can be rectangle or triangle.   This allows a much more efficient mesh.   AXIEM generally have a much more efficient
  
  
  • AXIEM contains the ability to process forms to clean geometries that cause inefficiencies of the mesh.  EMSight does not have this feature.
  
  
  • AXIEM can forms thick metal mesh, EMSight can not, and user must make approximations when thick metal will change coupling (loss is recorded properly with the thickness of the metal)

  Ports

  • The ports are for the most part similar, but parasites due on AXIEM ports are less.  In addition, the AXIEM has a side wall, thus the effects of not move of the terms of reference of the edge of the line are a lot less AXIEM in.
  
  
  • Ports can be added to most any place in geometry with AXIEM.  For EMSight, the ports are usually only added outside the geometry and have limitations to the aircraft on either side of the reference speaker.

  Problem solvers

  • EMSight does not have a low frequency Solver.  Stop low-frequency and then extrapolate to DC.  This usually works well, but you must take into account if the extrapolation is accurate.  AXIEM presents both a low and high frequency Solver so will do better in a low frequencies generally much better in DC.
  
  
  • Solver of EMSight scales O (n) ^ 2 for memory and O (n) ^ 3 for the moment.   It has a special algorithm to break the question of memory, but the question of time is the killer.  AXIEM has a direct Solver which scales in the same way and an iterative Solver which will scale O (nlogn).   In other words, AXIEM can solve a lot of bigger problems than EMSight.
  
  
  • Several AXIEM processes are multithreaded as EMSight.

  Speaker

  • EMSight is inside a perfect driver side wall.   This works well if you the circuit is in the same cavity.  If not, you must know the rules of them on to the forms of space of the flanks and how that much to extend the port could reference planes.   AXIEM is not here.   AXIEM does not currently have to simulate a perfect driver side wall.

  I don't know that I missed a few aspects of the tools.   From the point of view of the AWR that AXIEM is the tool of choice, except in a few cases have been EMSight may be required.

• What are the specifications for an inspiron 3000 11 touchscreen?

  Myself and others have on a mission to find a stylus that works with this 2 in 1 and so far not had much luck.  The squishy tip pen that I got for my phone does not work.  One of these somewhat new metal stylus with the small round disc on the end works fine on my phone, but not on the inspiron with or without a screen protector.  I had an active stylus for motorola with a battery that someone suggested, it does what intermiittingly but I guess the fact that it works at all should give me some hope.  What are the specifications for the touchscreen on the 3135?  I read that a thick cover as glass can affect if the pen works or not as well as screen protection.  I found a couple of stylus that claim to have the adjustable power so they should work with coatings of glass and screen protection.  Pen digital universal Adrien, adjustable overdrive and navitech are all meant to be active stylus which have two power settings.  I asked in the faq, but nobody can say if it works on the inspiron and the manufacturer says they have not tested either.  While I hate to spend 30 dollars on something like that without knowing that it will work 100%, I ordered one of the navitech off amazon because I can go back if I want to.  I poured everything I can find on this machine, but nowhere does anyone give any details about the touch screen.  I know that this is not intended to be a stamp artist drawing or anything other than the simple ability to interact with small buttons on the screen or the digital signature casual or simple drawing hand is the main reasons I want a small pen tip.  Don't get me wrong, I really enjoy this machine, but I don't understand why material for touch screen specifications seem to be such a mystery tech dark and deep.  This is perhaps because Dell has more than one supplier... I guess it could be both one reason than others.  Even if we can talk only about basic general information is probably more than I've found so far.

  Your S3 screen with a digitizer.  Your laptop screen does not work.

  Essentially, a laptop a scanning screen is also called "tablet" and - for systems or more 12 "inch screen size, will sell for a minimum of about $800-900.  About lowest price will be a simple touchscreen - not a digitizer.

• What are the different way of seeing the visitor record or profile captures information using eloqua?

  What are the different way of seeing the visitor record or profile captures information using eloqua?

  Hey Sanny,.

  There are three ways to view the visitor record or profile captures information using eloqua:

  • Contact & prospect downloads
  • submission of form data
  • cookie script & follow-up

  Thank you

• My CC put again PS. Is my release book Adobe Photoshop CC 2015 CLASSROOM IN A BOOK® official training binder of Adobe still valid? What are the obsolete parts?

  Dear community:

  I agree with the PS CC. So, I was regularly updated.

  I also bought through Kindle and recorded through PeachPit book "Adobe Photoshop CC 2015 free CLASSROOM IN A BOOK® official training Adobe workbook" by Faulkner and Chavez.

  What are the parts of the book are now outdated?

  I want to have the tutorial on the function of fluidity which became somehow.

  MarioFrez wrote:

  I was wondering if the site Web of Peach Pit would automatically update the book in its form online. Will follow your instructions but I'm still confused about the function of fluidity.

  You said that you have saved the book on the Peachpit website, and it's a good thing. When you are logged on the Peachpit website, go to your account page, your downloadable digital files for the book and the lessons will be under the tabs digital purchases and updates. If there is an update of this edition of the book, you will be able to download it here.

  Also, when I said earlier that the new Select functionality and mask should be used if the book mentions refine edge, which also applies at any time that see you improve the mask as in Lesson 6. Refine edge and improve the mask and now select and mask.

• What are the issues and how can I put the documents in the files?

  As usual; Oracle is absolutely horrible in providing any kind of basic instructions on the use of the products.

  I need to upload files to a structure (don't care if it's collections, folders, or in mason jars as long as it works) and be able version them and seize those I want.

  I managed to get a variety of things to work with the genericSoapService (cannot use the API in accordance with local policy), but everything I check in goes in (don't know where)

  I don't think I'm even asking the right questions because my web researchers increase irrelevant results.

  What are the issues and how can I put the documents in the files?

  I created a few files like this:

  <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ucm="http://www.oracle.com/UCM">
     <soapenv:Header/>
     <soapenv:Body>
  <GenericRequest xmlns="http://www.oracle.com/UCM" webKey="cs">
  <Service IdcService="FLD_CREATE_FOLDER">
  <Document>
  <Field name="fParentGUID">C976021E28DD8B26FB2D437B5BF56B7F</Field>
  <Field name="fPath">/RAFT/Appraisals/</Field>
  <Field name="fFolderName">0111234567</Field>
  <Field name="fSecurityGroup">RAFT_ADMINGrp</Field>
  </Document>
  </Service>
  </GenericRequest>
     </soapenv:Body>
  </soapenv:Envelope>
  

  Here's a sample call:

  The virtual path is/Appraisals/0111234567 /.

  The GUID for this folder is CBF8EF9C59F8A6C84EB31C68F0903399

  I see the reference to xCollectionID when I look for answers, but the data is not available for me (see the output below)

  When I run this it stores the file but the file does not appear in the folder.

  <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ucm="http://www.oracle.com/UCM">
       <soapenv:Header/>
  <soapenv:Body>
  <GenericRequest xmlns="http://www.oracle.com/UCM" webKey="cs">
  <Service IdcService="CHECKIN_UNIVERSAL">
  <Document>
  <Field name="fFolderGUID">CBF8EF9C59F8A6C84EB31C68F0903399</Field>
  <Field name="dDocType">Document</Field>
  <Field name="dSecurityGroup">Public</Field>
  <Field name="dDocAccount"/>
  <Field name="dSecurityGroup">RAFT_ADMINGrp</Field>
  <Field name="xFHACaseNumber">0111234567</Field>
  <Field name="xFHADocumentType">Appraisal</Field>
  <Field name="dDocTitle">tuesday2document.txt</Field>
  <File name="primaryFile" href="whereami.txt">
  <Contents>dGhpcyBpcyBteSBkb2N1bWVudA==</Contents>
  </File>
  </Document>
  </Service>
  </GenericRequest>
  </soapenv:Body>
  </soapenv:Envelope>
  

  Returns:

  <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
     <env:Header/>
     <env:Body>
        <ns2:GenericResponse xmlns:ns2="http://www.oracle.com/UCM">
           <ns2:Service IdcService="CHECKIN_UNIVERSAL">
              <ns2:Document>
                 <ns2:Field name="reserveLocation">false</ns2:Field>
                 <ns2:Field name="IdcService">CHECKIN_UNIVERSAL</ns2:Field>
                 <ns2:Field name="dSecurityGroup">RAFT_ADMINGrp</ns2:Field>
                 <ns2:Field name="dpTriggerField">xIdcProfile</ns2:Field>
                 <ns2:Field name="dDocType">Document</ns2:Field>
                 <ns2:Field name="scriptableActionErr"/>
                 <ns2:Field name="xPartitionId:isSetDefault">1</ns2:Field>
                 <ns2:Field name="xWebFlag"/>
                 <ns2:Field name="dDocCreator">C03999</ns2:Field>
                 <ns2:Field name="dDocAccount"/>
                 <ns2:Field name="xClbraUserList"/>
                 <ns2:Field name="dLocation"/>
                 <ns2:Field name="xWCPageId:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dWebExtension">txt</ns2:Field>
                 <ns2:Field name="isNew">1</ns2:Field>
                 <ns2:Field name="IsQueryObjectPersistent"/>
                 <ns2:Field name="xWCTags"/>
                 <ns2:Field name="LockedContents1">dDocName:WCC_Cluster-001208</ns2:Field>
                 <ns2:Field name="dClbraName"/>
                 <ns2:Field name="dCreateDate">10/7/14 8:58 AM</ns2:Field>
                 <ns2:Field name="xClbraAliasList"/>
                 <ns2:Field name="dActionMillis">72487502</ns2:Field>
                 <ns2:Field name="StatusMessage">Successfully checked in content item 'WCC_CLUSTER-001208'.</ns2:Field>
                 <ns2:Field name="dIsPrimary">1</ns2:Field>
                 <ns2:Field name="isInfoOnly"/>
                 <ns2:Field name="dActionDate">10/7/14 8:58 AM</ns2:Field>
                 <ns2:Field name="xWCPageId"/>
                 <ns2:Field name="xLibraryGUID:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dDocID">1216</ns2:Field>
                 <ns2:Field name="dPublishState"/>
                 <ns2:Field name="xFHACaseNumber">0111234567</ns2:Field>
                 <ns2:Field name="doSorting">0</ns2:Field>
                 <ns2:Field name="primaryFile">whereami.txt</ns2:Field>
                 <ns2:Field name="dRevisionID">1</ns2:Field>
                 <ns2:Field name="xExternalDataSet"/>
                 <ns2:Field name="scriptableActionFunction">determineCheckin</ns2:Field>
                 <ns2:Field name="UseForwardOnlyCursor"/>
                 <ns2:Field name="noDocLock">1</ns2:Field>
                 <ns2:Field name="dID">1208</ns2:Field>
                 <ns2:Field name="xWCTags:isSetDefault">1</ns2:Field>
                 <ns2:Field name="xPartitionId"/>
                 <ns2:Field name="xComments:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dInDate">10/7/14 8:58 AM</ns2:Field>
                 <ns2:Field name="dDocOwner">C03999</ns2:Field>
                 <ns2:Field name="dUser">C03999</ns2:Field>
                 <ns2:Field name="isDocProfileUsed">true</ns2:Field>
                 <ns2:Field name="scriptableActionParams"/>
                 <ns2:Field name="dpEvent">OnImport</ns2:Field>
                 <ns2:Field name="xExternalDataSet:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dDocLastModifier">C03999</ns2:Field>
                 <ns2:Field name="DocExists"/>
                 <ns2:Field name="dConversion">PassThru</ns2:Field>
                 <ns2:Field name="StatusCode">0</ns2:Field>
                 <ns2:Field name="xStorageRule:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dStatus">DONE</ns2:Field>
                 <ns2:Field name="dOriginalName">whereami.txt</ns2:Field>
                 <ns2:Field name="dRevClassID">1208</ns2:Field>
                 <ns2:Field name="idcToken"/>
                 <ns2:Field name="dRevLabel">1</ns2:Field>
                 <ns2:Field name="dDocName">WCC_CLUSTER-001208</ns2:Field>
                 <ns2:Field name="xWCWorkflowApproverUserList:isSetDefault">1</ns2:Field>
                 <ns2:Field name="xStorageRule">webasset</ns2:Field>
                 <ns2:Field name="localizedForResponse">1</ns2:Field>
                 <ns2:Field name="dPublishType"/>
                 <ns2:Field name="fFolderGUID">CBF8EF9C59F8A6C84EB31C68F0903399</ns2:Field>
                 <ns2:Field name="dFormat">text/plain</ns2:Field>
                 <ns2:Field name="scriptableActionType">3</ns2:Field>
                 <ns2:Field name="dDocTitle">tuesday2document.txt</ns2:Field>
                 <ns2:Field name="dpAction">CheckinNew</ns2:Field>
                 <ns2:Field name="primaryFile:path">/opt/oracle/work/wcc_cluster/ucm/cs/vault/~temp/1963032402.txt</ns2:Field>
                 <ns2:Field name="refreshMonikers"/>
                 <ns2:Field name="xWCWorkflowAssignment"/>
                 <ns2:Field name="isEditMode">1</ns2:Field>
                 <ns2:Field name="refreshSubMonikers"/>
                 <ns2:Field name="xFHADocumentType">Appraisal</ns2:Field>
                 <ns2:Field name="changedMonikers"/>
                 <ns2:Field name="dRevRank">0</ns2:Field>
                 <ns2:Field name="StorageRule">webasset</ns2:Field>
                 <ns2:Field name="xWCWorkflowApproverUserList"/>
                 <ns2:Field name="xComments"/>
                 <ns2:Field name="dAction">Checkin</ns2:Field>
                 <ns2:Field name="isDocProfileDone">1</ns2:Field>
                 <ns2:Field name="xWebFlag:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dRawDocID">1215</ns2:Field>
                 <ns2:Field name="xLibraryGUID"/>
                 <ns2:Field name="StatusMessageKey">!csServiceStatusMessage_checkin,WCC_CLUSTER-001208</ns2:Field>
                 <ns2:Field name="xIdcProfile:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dWorkflowState"/>
                 <ns2:Field name="dProcessingState">Y</ns2:Field>
                 <ns2:Field name="dDocCreatedDate">{ts '2014-10-07 08:58:07.482'}</ns2:Field>
                 <ns2:Field name="dDocAuthor">C03999</ns2:Field>
                 <ns2:Field name="dOutDate"/>
                 <ns2:Field name="dIsWebFormat">0</ns2:Field>
                 <ns2:Field name="scriptableActionFlags">12</ns2:Field>
                 <ns2:Field name="isCheckin">1</ns2:Field>
                 <ns2:Field name="RenditionId">webViewableFile</ns2:Field>
                 <ns2:Field name="dExtension">txt</ns2:Field>
                 <ns2:Field name="VaultfilePath">/opt/oracle/work/wcc_cluster/ucm/cs/vault/~temp/1963032402.txt</ns2:Field>
                 <ns2:Field name="prevReleaseState"/>
                 <ns2:Field name="isStatusChanged">1</ns2:Field>
                 <ns2:Field name="dReleaseState">N</ns2:Field>
                 <ns2:Field name="dWebOriginalName">WCC_CLUSTER-001208~1.txt</ns2:Field>
                 <ns2:Field name="xWCWorkflowAssignment:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dDocLastModifiedDate">{ts '2014-10-07 08:58:07.482'}</ns2:Field>
                 <ns2:Field name="dFileSize">19</ns2:Field>
                 <ns2:Field name="xIdcProfile"/>
              </ns2:Document>
           </ns2:Service>
        </ns2:GenericResponse>
     </env:Body>
  </env:Envelope>
  

  CBF8EF9C59F8A6C84EB31C68F0903399

  Replace fFolderGUID by fParentGUID