What command line will be starting my computer by e-drive?

Similar Questions

• Dimension 8400 will not start up cd or dvd drive

  Hello

  I have a Dimension 8400 that refuses to boot from the CD or dvd drive. In the bios, tried to move 'Onboard or USB CD-ROM Drive' to the first position in the boot sequence. Also, I tried pressing "f12" during startup to access the start menu. I tried to select the "integrated or usb cd-rom" option from there with a cd bootable in both drives and still have had no success.

  Any help will be greatly appreciated, thank you.

  I also have the same problem.  Do not understand why Dell does not address this issue.  Trying to recharge a system using the Dell restore CD and have two CD drives in the system provided with the system and will not start to :(

• Computer Vista will not start, the computer keeps restarting. Also had a BSOD "STOP: 0 x 00000024 (0X8D5389C, 0X8DB535CC, 0X001904AA, 0X8CC143A1)" while trying to use reinstall OS Dell drive

  Original title: corrupted vista OS?

  My Dell studio slim desktop (Vista OS) that I have since Mar09 died on me 2 weeks back and I can't it start and it will keep rebooting until it resembles the wide long beep (as if a deceased person)

  Whenever my com has restarted, it shows the following:

  Safe mode

  Safe mode with networking

  Safe mode with command prompt

  Last known good configuration (Advanced)

  Start Windows normally

  All options will be led to the recovery of my com & return the same screen.

  It will always get stuck at the loading bar where the com starts boot & restarts itself.

  I tried to attach the hard drive to a different com as external hard drive, but it will begin to restart that com & hang the CMO as well

  I tried using the disc to reinstall OS from DELL and it will show a msg of error (blue screen) with the following text:

  Disable or uninstall the antivirus, Defrag disk or backup utilities. Check the configuration of the hard disk & check for any updated drivers.

  Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  STOP: 0 X 00000024 (0X8D5389C, 0X8DB535CC, 0X001904AA, 0X8CC143A1)

  NTFS.sys address 8CC143A1 base at 8CC06000, Datestamp 47918a 96

  Any idea of this situation?

  Is it possible to save my cause com have not all backups from my hard drive?

  Any help would be grateful.

  Thank you

  Hi Bill,

  I forgot to include some info as well... I replaced the 'touched' hardisk (Barracuda 500 GB) to an unused a (Barracuda 160 GB) and the problems disappeared. Whenever I change back the 500 GB in the com, the sound signal occurs only backwards the system continues the reopening for abt... 10 + times?

  "My Office studio slim (Vista OS) Dell I have since Mar09 died on me 2 weeks back and I can't it start, and he'll keep rebooting until it seems a beep long-lasting looks not (as if someone died).

  So the questions are now fixed, unless you put the other disk hard?

  Test the other hard drive.

  Go to the website of your computer manufacturer > find specifications of hardware in your computer (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic software > make a Bootable disc > test your hard drive.

  And run the F12 as I advised you to do so.

  It is DELL's Diagnostics software.

  Good luck with it.

• Can what command line I use to uninstall windows7 kb3097877

  As noted above, need to uninstall kb3097877 as nothing else works

  Thank you

  See here: https://support.microsoft.com/en-us/kb/3097877

• Download it "Boot Manager is damaged, the system will not start" after changing a hard drive.

  Original title: where and how to get the installation to win 8 pro 64 bit oem disc

  Please community, help me. First of all, I have upgraded to win 10 and it works well. So I decided to start from scratch and got a bigger hard drive and reinstall win 8. I did successfully, but when I rebooted the computer, I received a statement that says "Boot Manager is damaged, the system cannot start ', which is why I am now looking for a start or install disk for win 8 64 bit oem. I was not able to start since I received the message. Help, please.

  Hello

  Maybe that's a problem, but you can try...

  You can try to download the ISO of Windows 8 from the following link:

  Download the .exe installation of:

  http://Web.ESD.Microsoft.com/W8DL/WSEC5B1D8A9DFDFD92DFB736C5B1D8956B5B1D8/Windows8-Setup.exe

  Click on Setup.exe. The wizard of Windows 8 will begin. Enter your key of Windows 8 and press Next.

  Click install now and let the full download.

  The installation files will be stored by default in the C:\ESD\Windows folder.

  When the "Install Windows 8" message is displayed, select 'Install by creating media' to create a bootable USB key or .iso (a disk image) file. Chose a folder to store the image, for example "Windows.iso.

  OR... http://Windows.Microsoft.com/en-us/Windows-8/upgrade-product-key-only

  If this does not work, see this thread...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/trying-to-update-from-Vista/2dd14d77-E68A-43ad-b53e-7a1afaf1d410

  BTW... You can download an ISO of 8.1 Win or create media from here...

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

• L50 satellite will not start up - request password HARD drive

  Hello

  I hope someone can help me

  I have a laptop Toshiba Satellite L50 and when I start it, it says
  + no boot device please don't restart System.

  It is still under warranty because it was purchased only 6 months ago.
  I took it back where I bought it and they told me to contact Toshiba.

  I'm waiting on a reminder.
  I hope that someone can help you. He also asked that the HARD drive password.

  Where can I find this information?

  Hi Kym

  I guess the L50 Satellite cannot find the boot device (HARD drive), because the HARD drive was obtained with a drive password HARD and without this HARD isn't accessible disk password and the system does not start properly.

  Did you set this password for HARD drive in the past?
  I m request because this isn t password on new laptops. This HARD drive password can only be set by the owner of the laptop

  Of my knowledge if you know n t this HARD drive password, you will not be able to access the HARD disk in such a case, the HARD drive would be useless, and the data would be lost

  That's why I recommend you check if someone put the HARD drive on your laptop password where you n t know the password, you will need to replace the HARD drive and reinstall the system once more.

• Re: Satellite L300 will not start and cannot restore HARD drive

  I have a L300 which stops just to start (after that the screen flash BIOS) with a single cursor flashing when I boot from the HARD disk. I can access the bios Setup and boot from the CD. I took the HARD drive connected to my external USB adapter on another PC and I can see partitions C and D and read the files correctly. I noticed that there is a directory called 'HDD recovery' on the D drive, but I don't have a recovery CD or another program to restore it.

  I found a boot of Vista recovery disc and it allows me to start a version of vista recovery but when I check the windows system can't find any errors. Also, if I choose the system restore then he says that he has no restore file.
  I suspect it's the disk HARD restore being Tosh files and Windows.

  Help someone!

  Paul

  Set the default BIOS settings and enter the Advanced Start parameters using F8 at startup.
  You can boot OS using the safe mode option?

• The file of the bar - descriptor.xml (and make the application of command line)

  I made a game with air and it is online for sale on Android and iOS. It is somewhat popular and I thought to put up on Blackberry for quite awhile now and with the Port of soon-to-start-A-Thon, this seems to be a great time to finally make it.

  BlackBerry is not very common that here where I live in Sweden, however it still looks like an interesting with a potential platform if I want to get the trip. Unfortunately I don't own a camera myself so I'll use the Simulator. With some graphic problems with the simulator when running in mode BB10DevAlpha (icons does not appear right) and the Simulator is very slow when running in mode BB10DevAlphaSafe (chart appears on the right, but it seems that updating them requires more CPU my computer are available).

  The game is built using nothing other than Adobe Flash Professional CS6 and a bunch of command line tools to build the package and sign. I've only got an old computer with Windows XP now since the death of my main PC, all at the time and since the Port-A-Thon is just a few days I do with what I got.

  Firstly I understand that only AIR 3.1 is supported by Blackberry 10, so I use the old AIR SDK 3.1 to create a SWF (flash) file.

  What I really need to do should be used in the exported SWF file of the game, then use the command line tools provided by RIM to build the package, right?

  Except that I did not count on bar - descriptor.xml to be so difficult to understand.

  I was brought to the documentation here: https://developer.blackberry.com/air/documentation/bb10/bar-descriptor_config_file.html

  It says Adobe AIR at the top, the platform selected is Blackberry 10 and the title says "bar-descriptor configuration file", so it must be in the right place!

  I start by trying the 'bar-descriptor configuration example file"on this page:

  ===========================================================

  
  
    
        None
        fake
    
   
    
     Name of the author
   
    
     gXXXxXXx ##XxXxXxxxXxXX #xxx
   
    
     Core.Games
   
    
     Icon.PNG
   
    
     HelloWorld - splash.png
   
    
     read_geolocation
     use_camera
   
    
     1
  

  ===========================================================

  Of course during the test I replaced a few things in the example above with the correct filenames for images etc, I just copied the example of right - off this time to you guys show what I mean.

  Firstly, I extract "blackberry-tablets-sdk - 3.0.0" in a folder on the disc, then I make sure as a full path to the "bin" in the SDK folder inside the path on the OS environment variable.

  Then I read on "Applications of Test using the command line": https://developer.blackberry.com/air/documentation/bb10/testing_your_application_cmd_ms_2010851_11.h...

  Now I run:

  BlackBerry - airpackager.bat - package installApp - blackberry-myappname - new.bar - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf myappnameicon86.png bg splashscreen1024.png - device 192.168.8.128

  Note that "bg" is a folder with 500 images that must be accessible from the app. I hope that I can just add the folder like this and not type a path to each image file...

  What I get (in lib\adt.jar via the bat file):

  error 101: Namespace is missing
  Error: Validation of the AIR is not

  Okay, so the example did not straight on the box.

  Now, I've read all paragraphs in the first URL I linked above ("the bar-descriptor configuration file"). I start my own XML file and make sure to include everything that is marked as "necessary". That's what I'm left with:

  ===========================================================

  
  
      MyCompany
      
          
          com.mydomain.myappname
          My App name
          3.0.0
          
              splashscreen1024.PNG
          
          1.5.0
      
      run_native
      
          application
          
              bb.action.VIEW
              application/octet-stream
          
      
  

  ===========================================================

  I have no idea of what concerns the block whole call target, but it took, so he must be there.

  Now I launch (notice that myappnameicon86.png is gone since no icon is mentioned in the above XML code, it is not mandatory):

  BlackBerry - airpackager.bat - package installApp - blackberry-myappname - new.bar - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf bg splashscreen1024.png - device 192.168.8.128

  Yet once, I get:

  error 101: Namespace is missing
  Error: Validation of the AIR is not

  Frustrated I get autour on the forums for answers, because the official documentation is nowhere getting me.

  I'm left with this:

  ===========================================================

  
  http://ns.Adobe.com/air/application/3.1">
      com.mydomain.myappname
      1.5.0
      
      My App name
      
      My App name
      
      
          myappname.swf
          standard
          fake
          true
          true
          landscape
          GPU
          fake
      
      
          myappnameicon36.PNG
          myappnameicon48.PNG
          myappnameicon72.PNG
      
      fake
      fake
      
          qnx.fuse.ui.skins.QNXDevice
          qnx.fuse.ui.skins.QNXNetwork
          qnx.fuse.ui.skins.QNXSensors
          qnx.fuse.ui.skins.QNXSkins
      
  

  ===========================================================

  Looks like the XML code that I use when I build for Android.

  First of all it doesn't have the tag root of qnx, but also nothing of the icons are of the required size (86 x 86). The tag required splashscreens and invoke target is also absent, to name a few. No idea of what the entire block of 'extensions' really do.

  Surely, this does not work:

  BlackBerry - airpackager.bat - package installApp - blackberry-myappname - new.bar - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf QNXDevice.ane QNXNetwork.ane QNXSensors.ane QNXSkins.ane myappnameicon36.png myappnameicon48.png myappnameicon72.png bg-device 192.168.8.128

  Success in building the package BAR to my infinite surprise!

  He even managed to install on the Simulator. An icon for the game. However when it auto-couru the app went into landscape, thought for a second and then crashed (or you leave?) without a message.

  Perhaps because the required qnx tag was missing in the XML?
  Perhaps because images in the bg file could not be loaded?
  Perhaps because he had no permission to keep screen from dimming?

  I have no idea. I tried to add XML to qnx at the address previous to the bar - descriptor.xml, I thought that maybe he needed both the qnx block for when you run the application and the application block for when packaging. But now, he has complained of something like XML is not not clean ("' fatal error: markup in the document following the root element must be well-formed." ").

  So he came to it, I have to ask for help if I ever make the deadline of the Port-A-Thon.

  (1) how am I supposed to write the bar - descriptor.xml?
  (2) what command line starting by "blackberry - airpackager.bat" is OK to use?
  (3) all I have to do is build the SWF using Adobe Flash Professional CS6 and then pack it using the Blackberry SDK, right?

  First of all, there are two xml files that you need.

  One is called the manifesto, is to AIR and is called yourappname- app.xml. It is identical to the ones you use for Android and IOS, though some elements will be ignored. It's one you need to switch on the command line, and is probably causing the 'Namespace' missing error message. A file manifest a minimum is:

  
  http://ns.adobe.com/air/application/3.1">
  
      com.example.appname
      My Fabulous Game
      1.0.0
  
      FileNameOfYourSwfWithoutExtension
      YourCompanyName
      
          [This value will be overwritten by Flash Builder in the output app.xml]
          true
          false
          none
          cpu
          false
      
  
  

  Replace the text in red with your own stuff.

  The second xml file is called to the bar of descriptor. It is for App World and the installation process and is called bar - descriptor.xml. It contains information about signing code, icon, permissions etc. A simple bar - descriptor.xml is:

  
  
     
        none
        true
        landscape
        false
        cpu
     
  
     
     your-name-on-certificate
     your-id-on-certificate
  
     core.games
  
     
     1
  
     
     
        icon86x86.png
     
     splash-landscape.png
  
     
     2.1.0.1314
  
     
     access_shared
     access_internet
     play_audio
     set_audio_volume
  
  

  Make sure that you at least change the red dots.

• Setting up command line options Toshiba VAP - Support Button-

  Hello

  I need to configure the button Support drivers for laptops of the Portege series as part of the deployment of Windows 7 x 64 bit Enterprise on the following models: Z830, Z930 and R930.

  I need to install Toshiba value added package with Flash card option only.
  What command line options are present to do that?
  I'm looking for it deploy through SCCM.

  Thank you

  Hello

  My knowledge of the value of added Toshiba contains various simple applications of Toshiba. These applications must be installed one after the other.
  You will need to run the setup.exe / installation.exe for the procedure to start the other options are not known to me

• WMP 12 command-line parameters are ignored

  I'm under 64-bit Windows 7 and WMP 12. Currently, I'm trying to write a script that plays a playlist of videos using the full screen. My current attempt at the command line is

  start the wmplayer /Playlist myvideos.wpl /fullScreen

  so that the player starts but it only takes the playlist or is the player in full screen. Any ideas? I have two screens with different resolutions, connected to the computer.

  Thank you

  -Thomas

  Hi Thomas,

  You need not explicitly specify the playlist format (.cpl, etc.) when you try to play the playlist.

  Try again with the following command and check to see if that fixes the problem:

  start the wmplayer /Playlist my /fullscreen videos

   

  For a list of parameters to the command line for Windows Media Player, see the following article:

  Wmplayer command line parameters

  http://msdn.Microsoft.com/en-us/library/dd562624%28VS.85%29.aspx

  Hope this information helps.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Extensions Manager command-line tool

  Does anyone know when this tool is likely to be available and what will be its functionality.

  I still have to offer extensions through my site, but customers while waiting to open windows Terminal and run command lines will cause problems.

  Hi, this tool is currently available at the foot of this article: Adobe Exchange

  We recommend that you create your own setup file for extensions available on your own website.

• From server managed by using the Node Manager command line

  Hello
  
  I have configured the Node Manager and it is connected to the administrator of the server without problem. Now, I wanted to start the server managed through the console but it is a failure and my guess is that the syntax of the command line used is not correct.
  
  My question is, how do I change the command line used to start the Node Manager-managed server? I try to use the configuration tab start the server and it seems that does not. I also try to update the file .properties for the managed server.
  
  Whenever I look at the managed server logs, it gives me this line...
  
  NodeManager > < start WebLogic server with command line: <>...
  
  The command-line in newspapers aren't what I put in the .properties file or on the Server Start tab. She is from somewhere and I don't know where. I just want to set up the command line Node Manager uses to start a managed server.
  
  If all goes well, I'm clear with my problem and someone might be able to help. Thank you.

  You can try to follow the Option-2) mentioned in the link below: http://jaysensharma.wordpress.com/2010/03/26/nodemanager-based-managedservers-setting-mem_args/

• Printer HP Photosmart will not start

  I am not necessarily in a hurry for an answer.

  I use a HP Photosmart 7260, S/N CN38Q2B0ZQ, Q3005A printer, model # SDGOA - 0372, with a Mac OS 10.5.8.  Printer blinking red and will not start.  There is no driver for the printer.  I had for a long time, never had a problem.  What should I do?

  Red flashing red in the light, I think that your machine has no status. If it flashes in the light of memory card, then there is an error with the memory card. Unfortunately, the machine is 7 years old and has lived a long life that printers are concerned. It would not be surprising if it has passed. This doesn't seem to be a hardware problem.

• Command line after erasing the hard drive

  I work for a charity and have inherited a HP Compaq 6735 s in which the HD has been erased. I have no recovery disks. Simple question - how do the command line? The start menu is exactly that, a menu. Can I go out to a command line?

  To run a command, you must first run a code it-such as files on the hard drive or a bootable floppy. There is no file on a hard drive wiped. Start with a Windows or other bootable media diskette.

  You should be able to get the installation of HP media. Give them a call.800 - 334-5144 if you are in the United States or to the CA.

  If you live in another part of the world, start here >Contact HP

• command line to convert

  Hi all

  What command-line tool is to provide for the conversion .vmx .ovf except "ovftool" now. I mean free.

  Thanks for your response

  Ah, I see. . It's a nuisance.

  Do you sepcifically must disseminate this as an OVF? If all destinations are VMWare, you can simply manage import / export of the vmdk using VMKFSTools and VMware converter?