What configuration is required to start the application of P6, if deployed manually in weblogic?

Similar Questions

• "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

  "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: we will install Microsoft Visual C++ for your computer package.

  Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

  If you use the 64-bit operating system, download and install edition(X64) 64-bit.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Method 2: Run the fixit available at the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also, check the event log using Event Viewer.

  Please see the link below for more information on how to use Event Viewer to check the error message or information,

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you have additional problems, please reply to this post and we will be happy to help you further.

• WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  «WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.»

  This cams almost for all the applications that I try to open. I read all kinds of things to solve problems, but I can't install anything because it is constantly on the screen.

  I think it's like that because my computer shuts off when I was doing the system restore, because he has not started.

  I don't know what to do.

  Hello

   
  You can view the event log by using Event Viewer. See the link below for more information about how to use Event Viewer to check the error message or information,
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Please check the information in Event Viewer and let us know the problem more briefly for a better solution.
   
  
  Method 1:
  However, try the SFC (System File Checker) scan on the computer. Check out the following link to do the same thing:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 2:
  You try to run the fixit given in the following link and check if it works:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  Method 3:

  You have recently updated with Microsoft Visual C++?

  http://social.technet.Microsoft.com/forums/en/itprovistaact/thread/5491a46a-57f4-444D-a1fd-2600fa6d587e

  I hope this helps!

• BTTray.exe, error to start the Application.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:BTTray.exe, error to start the Application.

  • Programs that you have problems with the Bluetooth does not work overwhelming
  • BTTray.exe, Application error messages start error.
  • Recent changes made to your computer: just updated to windows update
  • What have you tried to solve the problem, I tried to look at Windows Update and also send mail to Microsoft

  Read the following article to see if it helps to solve the problem: http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?c=us&dl=false&l=en&s=gen&docid=6CF68D431EAAB41BE040AE0AB6E16686&doclang=en.

  Are you still using the BTTray?  If this isn't the case, we can solve the problem in a more easy way.

  Go tohttp://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and run Autoruns and click all.  Search bttray.exe or mfc80.dll and when you find it uncheck the box to prevent it from start to start.  Check the entire list as there may be several entries.  When you're done, click OK and restart.   The message should be gone.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot start the application - error code 8

  I'm running one of my own apps and I get this message:

  "Cannot start the application - error code 8.

  What is the error code 8? Where can I find a list of all error codes?

  Thanks in advance

  If you get error 8 or 13, and that everything you did is OK for this:

  -Uninstall all versions of your application

  -Restart the playbook

  -Install and run again

• Start the application at the start-up of the plant or machine.

  Hi guys!

  I am writing an application that all this is display certain information in the system menu.

  The problem I have is that he only started working when I open the Configuration screen (screen alone uses the application).

  My problem is that I need my application start running at startup of the device or, where the application has been installed.

  You have any suggestions?

  Thanks in andvance!

  SEE YOU SOON!

  If you use Eclipse, go to your BlackBerry_App_Descriptior.xml file in your project, see the Autorun feature in the start box and save it. That's all you need to do.

• Cannot start the application... Error code 13

  I installed my real application in device playbook by using the debugging token. Request worked fine.but nw am not able to open the application. "Cannot start the application...". Error code 13 shows this error message while trying to open the application... .i don't know what to do...! Help, please...!

  Thank you

  I had solved it. It was the problem of token bug. It was expired while I have created a new and run the application .nw, it works very well.

• BlackBerry Smartphones BlackBerry Maps is loaded on the NEW Bold 9700, but there is no icon to start the application

  You just bought a new Bold 9700.  I ran all of possible update.  BlackBerry Maps IS loaded (v5.0.0).  The operating system is the most recent.  I see BlackBerry Maps in applications of the add-on, but there is no icon to start the application.  The seller is completely useless when it comes to helping solve the problem.  The GPS seems to work and provides the correct location data, but I can't find a way to start the BlackBerry Maps application.  What gives?

  GPS still works on the device, even without BlackBerry Maps.

  Try Google maps. Free.

• Some time ago I bought Photoshop Elements in the apple App Store. I worked well. Now, if I try to start the application I get the message "Please do not run this application within this application package. On the other hand, it please launch Adobe Photos

  Some time ago I bought Photoshop Elements in the apple App Store. I worked well. Now, if I try to start the application I get the message "Please do not run this application within this application package. "Instead, please run Adobe Photoshop elements 13 of your Application folder. I tried this but it does not work. What to do to run the program?

  Follow these steps, Editor does not start | Mac App Store version

• starts the application server

  Hello
  in tools 8.52 in 2008, in which file should I register the domain name to start the application server automatically restart when?
  He was psntsrv.cfg in PS_HOME/appserv 8.49.
  Thank you.

  start the PSADMIN and choose the option
  (6) Service configuration
  and then
  (1) configure Windows Service
  Provide the name of CRP, the appserver you want to start automatically as a service

  In the Administration of PeopleSoft Services menu option
  (2) install the Windows Service
  This will create a new service, in my case
  PeopleSoft_C__apps_psoft_config

  Kind regards

  Halin

• command line to start the application server (8.50) under Unix

  Hello
  What is the command line to start the application (Tools 8.50) UNIX server?
  
  OPERATING SYSTEM: AIX 6.1
  Tools: 8.50
  
  Thank you.

  You can run 'psadmin-help' to get all the options available in the command line.

  Nicolas.

• I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

  I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium.  I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them.  The test seems to be hanging around 21% so I don't know how well it will do

  Hi A1W1LL,

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

  1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press any key when the message "Press any key to boot from CD or DVD".
  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
  4. click on repair your computer.
  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
  6. in the System Recovery Options dialog box, click System Restore.
  7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
  8. click Finish to restore the system.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Start the application at startup of Windows 8

  Hi all

  I'm launching my application on Windows 8 at startup. I tried the Task Scheduler. My concern is that, with Task Scheduler, the application begins only after the desktop appears. My intention is to start the application at startup without having to navigate the desktop.

  Any help is appreciated.

  Thank you

  Narayanan K

  Task Scheduler will launch an application, even if you do not visit the office.

  Or, you can just put a shortcut in your startup folder icon.

  Press +R to display the run box, type : startup of the shell and put any icon.  It will run when you connect.

• question on "How to call a method once when starting the application"

  Hello everyone.
  
  I'm trying to implement that article "How to call a method once when you start the application" by Frank suggests.
  https://blogs.Oracle.com/jdevotnharvest/entry/how_to_invoke_a_method
  
  
  Suppose I want to have a single entry point, so in my login.jpsx I have the below:

  <f:view beforePhase="#{login.onBeforePhase}">

  In the 'onBeforePhase' method, I have to pass the phaseEvent, since the signature is as follows:

  public void onBeforePhase(PhaseEvent phaseEvent)

  But how do I know the phaseEvent during the call to the login.onBeforePhase? How the call should be?
  
  Thank you very much!
  
  
  PS. I use jDev 11.1.2.1.0

  You must not pass something to this method, this method is called before each Phase except view restoration
  Just write logic as Frank suggested to the phase in which you want the code to run. You can get the PhaseId analogues

  PhaseId.RENDER_RESPONSE

  public void onBeforePhase(PhaseEvent phaseEvent) {// from Frank's doc
   //render response is called on an initial page request
    if(phaseEvent.getPhaseId() == PhaseId.RENDER_RESPONSE){
  ... etc
  

• Issue by starting the application server.

  I installed Tux 8.1 under windows 2003 on PT 8.48.16.
  
  Whenver I'm trying to start the application server I m getting the error message below.
  
  I had tried all the possible solution given on the support site, but no luck.
  
  Beside that, I also get a pop-up images that say ' an unhandeled win32 exception occurred in tmadmin.exe [3004]. "
  
  
  Can you please give advice about this.
  
  
  ==========
  Error: -.
  
  073656.DCB - STG-APP3! tmloadcf.4048.1592.-2: 24/04/2012: Tuxedo Version 8.1, 32-bit
  
  073656.DCB - STG-APP3! tmloadcf.4048.1592.-2: CMDTUX_CAT:879: INFO: a new file system is created. (size = 1120 blocks of 512 bytes)
  
  073658.DCB - STG-APP3! tmloadcf.4048.1592.-2: CMDTUX_CAT:871: INFO: E:\psoft\PT848\appserv\CRPROD\PSTUXCFG TUXCONFIG file was created
  
  073705.DCB - STG-APP3! PSADMIN.3964: Attempt to Begin on field CRPROD
  
  073717.DCB - STG-APP3! tmboot.3744.864.-2: 24/04/2012: Tuxedo Version 8.1, 32-bit
  
  073717.DCB - STG-APP3! tmboot.3744.864.-2: LIBTUX_CAT:681: ERROR: failed to create the message queue
  
  073717.DCB - STG-APP3! tmboot.3744.864.-2: FATAL: internal error: CMDTUX_CAT:1098: ERROR: cannot create the queue
  
  073717.DCB - STG-APP3! PSADMIN.3964: Attempt to end boot on domain CRPROD

  If you are using a terminal server server, make sure that you connect to the console on the server session (using mstsc/console or mstsc/Admin, depending on your windows version of the client).

  Kind regards
  Bob