Similar Questions

• What hearing method uses to determine the overal frequency?

  Hello

  No one knows which method uses Audition to determine the "global frequency" in the section "analysis of frequency? I need to know how is it calculated?

  Thank you very much!

  stephaniec9433324 wrote:

  Thank you for this! So am I right in thinking "global frequency" is that point which contains the largest amount of energy in a sound sample given frequency?

  I don't know why it's called "global" frequency - seems a little strange to me, although you could call it although it is a bit of a mouthful, I'm not sure. But, strictly speaking, what is the frequency of the amplitude higher at this moment on the screen. It isn't really a sign you measure; It's a single FFT 'slice', which raises even more questions, as the sector size determines the resolution and therefore the accuracy of the result in any case.

• What connection to use for faster printing

  I install my new of Officejet Pro 8600 today.  I have three options to connect, is a USB cable, ethernet cable or wireless.  To make the decision, I have a second remote desktop connected wireless to the internet and the usual iPhones.  My work horse is the computer that I will use often and want to have the fastest printing capabilities.  I still want to be able to print from the second remote computer too.

  Nothing in the HP documentation which addresses precisely this question.  What is the best connection should I use for this arrangement?  Your response would be greatly appreciated.

  TIA... John

  All of these out-rate connections greatly the mechanics of printing, so it's not really important.

  Between Ethernet and wireless, ALWAYS choose Ethernet if you can (no password, no interference, etc.).

• What is the version of SQL Server Express embedded used?

  To the best of my knowledge, we are using vCenter Server 5.0 U1.

  Build number is 623373 in help | Everything.

  What is the version of the SQL Server Express included/embedded - 2008?

  How to know and check?

  I need to know specifically which version of SQL Server Express Management Studio install on our vCenter server so I can start to run maintenance such as backups that truncates logs, and also to allow for more storage Journal, we get the error 9002 with the journal storage.

  Thank you, Tom

  vCenter Server 5.0 uses Microsoft SQL Server 2008 R2 Express as the Group datasbase.

  See for example http://kb.vmware.com/kb/2003790

  André

• Different results when contacting 11g DB using various connection methods

  Greetings:

  First of all, thank you in advance for any help you can provide.

  I'm looking for help to determine why certain methods of connection to a working DB production 11.2.0.3.0 64-bit, while others do not.  I tried 7 connection methods, some work, some give an ORA-12541: listener TNS:no error.  When connecting to a test instance, all 7 work very well.

  I'm not a server admin, but the following information obtained from them: both servers are running Linux RedHat Enterprise Server 5.10 (Tikanga).  Both run Oracle 11 g Enterprise Edition 11.2.0.3.0 64 bit.  Each is on a different subnet.  Each has a different DNS suffix up to the last section of the suffix, which is the same on both.  I don't know if the firewall rules are different.  Production server is a physical box, test server is a virtual machine.

  Results below are attempts to connect to the production server made from my Win7 64-bit workstation.  Once again, all attempts to test server are successful.

  Method                                                                                                      Result

  ODP.net 12.1.0.1.0 or 12.1.0.1.2 as an object in PowerShell 32 or 64 bit ORA-12541 .net

  . UDL file by using the provider, Oracle OLE DB of the ODAC 64bits 11.x or ORA-12541 12.x

  SqlPlus of Oracle Instant Client 11.x or ORA-12541 12.x

  Toad with entry in file TNSNames.ora success

  SQL Developer using the success TNSNames.ora file entry

  ODBC System DSN using Oracle 11 g pilot success

  TNSPing with entry in file TNSNames.ora success

  So, what's different in the methods of connection or network protocols between these methods that fail and those who succeed?  Our Oracle DBA has tried to help me and claims that the file of the listener on the server is correctly configured.  It seems to be useful, so I don't think it's brushing me off.  I did not have access to check it myself, so must continue in the event that it is.  So I'm assuming that the TNS listener error is generated because my traffic does not reach the DB rather than the listener being misconfigured file.  However, if

  My ultimate goal is to connect to prod using ODP.net in the PS script to make read-only SQL queries.  Works very well with the test, but of course, this data is not current.

  Thanks for any help! -EW

  EW, were all the client tries the same machine or different machines?  I hope your problem is either the entry in the file tnsnames.ora for connections of problem which can be different even from other tools on the machine even if multiple Oracle homes exists on the client.  Check the files tnsnames.ora entries.  If host names are referenced, verify that the client can recognize the hostname (DNS).  You may need to use an IP address instead.  Here's a more complete list of the possible causes of this problem.

  - -

  * Action:

  -If you are using local naming (TNSNAMES. ORA file):

  S ' ensure that "TNSNAMES" is cited as one of the values of the

  NAMES. DIRECTORY_PATH parameter in the Oracle Net profile

  (SQLNET. ORA)

  -Check that a TNSNAMES file. ORA file exists and is in good

  Directory and is accessible.

  -Make sure that the name of the network used as the connect identifier service

  It exists in the TNSNAMES file. ORA file.

  -Make sure that there are no errors of syntax anywhere in the TNSNAMES file. ORA

  file.  Search for unmatched parentheses or stray characters. Errors

  in a TNSNAMES file. ORA file can make it unusable.

  -If you use the directory naming:

  -Check that "LDAP" appears as one of the values of the

  NAMES. DIRETORY_PATH parameter in the Oracle Net profile

  (SQLNET. ORA).

  -Check that the LDAP directory server is in place and that it is

  accessible.

  -Check that the net service name or the database name used as the

  connect identifier is configured in the directory.

  -Check that the default context used is correct by

  by specifying a full network service name or a unique display name of LDAP

  as the login

  -If you use easy connect naming:

  -Check that "EZCONNECT" appears as one of the values of the

  NAMES. DIRETORY_PATH parameter in the Oracle Net profile

  (SQLNET. ORA).

  -Make sure that the host name, port, and specified service

  are correct.

  -Try putting the identifier of connection between quotation marks.

  //

  - -

  As mentioned that a firewall between the client and the database can cause problems.

  - -

  HTH - Mark D Powell.

• Extract the value of CallType when the call is connected by using the callConnected() method

  Hi all

  I want to get the value of CallType when a call is connected I use this code:

  Public MyClass extends AbstractPhoneListener {}

  private static int callType;

  public MyClass()

  {

  }

  {} public void callConnected (int callId)
  Boolean checkType is Phone.getCall (callId) .isOutgoing ();.
  If (checkType)
  callType = PhoneCallLog.TYPE_PLACED_CALL;
  on the other
  callType = PhoneCallLog.TYPE_RECEIVED_CALL;
  }

  }

  but I did not value of callType when the call is connected. I also debug application but control entered the callConnected method. What should I do now please help...

  have you added the phonelistener?
  http://www.BlackBerry.com/developers/docs/7.1.0api/NET/RIM/BlackBerry/API/phone/phone.html#addPhoneL...

• What can I use if I don't have Internet connection?

  I travel with my parents and they do not have WiFi.  What can I use on my iPod without an Internet connection?

  You can use a smart phone and endearing hotspot, if you have a phone and a plan that takes care of that.  Or buy a device of mifi for cell data to the Internet connections.

  Otherwise, any application that does not require an Internet connection in real time for use should work just fine.

• What is the MTBF method, used for the cRIO 9012, is the method of counting of Telcordia under what conditions?

  What is the MTBF method, used for the cRIO 9012, is the method of counting of Telcordia under what conditions? (Temperature, humidity, etc.)

  Hi jojosalud,

  According to the specifications for the cRIO-9012, the MTBF is 330 481 hours at 25 ° C; Question of Bellcore level II.

  Kind regards

• Need help, unable to connect to the ODBC database using the SQL Toolbox!

  Hi all

  I'm playing around with the evaluation of SQL Toolkit (2.2 + patch) and I'm having trouble.

  I ran the example 'connect' program and it seems to work fine.

  However, I try to write my own program, and I get the same message:

  "Service connection BD: (return value ==-10 [0xFFFFFFF6])."

  Native error - 2147467259 code 0x80004005

  The message is different from time to time, but the return value is constant.

  I use Microsoft SQL Server 2012 and MySQL.

  For MySQL, I installed the last Connector ODBC, 5.3.4. Inside the Control Panel / Data Sources (ODBC), I have a DSN called test_mysql in DSN user and system DSN.

  I ran a test on the connection and the test passes. I don't know if I have to use the ansi or unicode driver, I tried both with the same success.

  I do not know I had properly configured the SQL Server connection and who will try again.

  My Code CVI is quite simple:

  hdbc = connection BD ("DSN = test_mysql");

  Whenever I get a - 10 BD. Either I have something configured wrong or am I missing something.

  Does anyone have any suggestions?

  Update 2:

  After getting off the phone with Technical Support, the problem has been identified!

  LabWindows SQL Toolkit requires 32 bits DNS. My PC is a 64-bit, so my default DNS Manager in 64-bit.

  I needed to use the DNS Manager 32-bit when you work with the box tool.

  Once I created my DNS connections using the 32-bit version of the Datga ODBC Source manager, everything worked fine.

  See this technical note:

  http://digital.NI.com/public.nsf/allkb/E7984C0DA0F0E65086257694005B4CB7

• Should what app I use to connect my ACER Iconia 8 tablet wireless to my Samsung TV compatible dongle?

  How can I move apps on my ACER Iconia Tablet 8 from the internal memory to the external micro-SD card installed?   Also, can what app I use to connect wireless to my Samsung TV with a dongle on this subject?

  official app from Samsung?

  https://play.Google.com/store/apps/details?ID=com.Samsung.companion

  on applications on SD card, applications of the system (the default application installed) can be moved; downloaded application can be moved if they have options.

  settings/applications

  Locate the application that you want to move, press and select move to SD card

  Note that this move (if possible) a part of the application, most of the files will remain in the internal memory.

• Is VoIP a kind of internet connection what operating system using VoIP?

  Is VoIP a kind of internet connection what operating system using VoIP?

  VoIP means "Voice Over Internet Protocol". Have a read of this - https://en.wikipedia.org/wiki/Voice_over_IP for a little more in detail.

  Any OS with a proper application should be able to use it. Skype is a typical example, there are others.

• Is it possible that muse adobe to have a Back-End that connects to a database using MySQL, SQL, Access etc...

  Is it possible that muse adobe to have a Back-End that connects to a database using MySQL, SQL, Access etc...

  Nothing to do with the Muse at all. You have things backwards. If you use a dynamic interface, you work in the API hooks and predefined functions and that he don't just slap on an arbitrary HTML façade. It is simply not how it works.

  Mylenium

• Problem connecting SSO using SDDM 4.0 to import the SQL Server database

  I installed the new production version.

  It migrated the connections of preference and db 3.3 very well.

  This figure includes several SQL Server databases, where I worked with for a while.

  3.3, I was able to add the correct driver and the related standards ntlmauth.dll body so that I could import of SQL Server (and even with SQL Developer 3.x, I could connect to and query SQL Server)

  The 4.0 update, the driver and database connections migrate very well but I can't connect. I get the old error "Library SSPI has not loaded". Where is this dll must go to 4.0? I tried to copy it to the same relative locations used by 3.3, but nothing helped.

  Help!

  Finally got it - had upgraded to 1.3.1 JTDS

• How to get a database by using PL/SQL connection

  Dear friends,
  
  I need to get the name of the database where the user is logged - using PL/SQL. In other words, if I type "select user to double" get the logged in user. is it even possible for me to get a database connection?
  
  Thank you and best regards,
  
  Franklin

  Another option is to check the predefined context variables

  SQL> select sys_context('USERENV', 'DB_NAME') from dual;
  
  SYS_CONTEXT('USERENV','DB_NAME')
  --------------------------------------------------------------------------------
  orcl
  

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/functions165.htm#SQLRF06117

• Convert .xls in .csv file using pl/sql or any other method (oracle 9i)

  Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64 bit Production

  With partitioning, OLAP and Oracle Data Mining options

  Release 9.2.0.8.0 - Production jserver

  10.1.2.0.2 generator

  ORACLE Server Release 10.1.0.4.2

  Oracle 10.1.2.0.2 procedure generator

  Oracle ORACLE PL/SQL V10.1.0.4.2 - Production

  Oracle 10.1.0.4.0 Production CORE

  Integration Services 10.1.2.0.2 tools Oracle

  Space common tools Oracle 10.1.2.0.2

  Oracle Toolkit 2 for 32-bit Windows, 10.1.2.0.2 platforms

  Resource object 10.1.2.0.2 store

  Oracle Help 10.1.2.0.2

  Oracle Sqlmgr 10.1.2.0.2

  Query Oracle 10.1.2.0.2 - Production Designer

  PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)

  Oracle ZRC 10.1.2.0.2

  Oracle XML Developers Kit 10.1.0.4.2 - Production

  Virtual graphics system Oracle 10.1.2.0.2

  Image of Oracle 10.1.2.0.2

  Widget media Oracle 10.1.2.0.2

  The GUI utility 10.1.2.0.2 tools Oracle

  I had seen a very old post of 2009.

  Convert .xls in .csv file using pl/sql

  I know that it s a long time but just wanted to know if there is a way to convert excel .csv.

  I have a directory say 'F:\purple_top\ '. I'll get the .xls file in this directory. I need to change to .csv and tables load external oracle. Any ideas or advance coding on it since 2009 so far?

  A few other options might be:

  • Java code, which can be used from within Oracle, which makes use of utility libraries (e.g. Aspose.Cells) open source (for example Apache POI) or "save under" CSV, or read the source cells and their output to a CSV file.
  • COM Automation, using available open source (for example, JACOB or j-interop) or commercial libraries, which can automate Excel to open a XLS file and "Save as" a CSV file. In addition, Oracle has a feature of COM Automation (available since version 8 but abandoned after Oracle 11g). I have successfully used this read (non-macro-enabled) Excel files in PL/SQL.
  • Other approaches using Perl or PHP can be found by googling 'convert xls to csv.

  Gerard