What device is my node connected to (CLI)?
I am currently engaged in trying to find what my current node device is connected to and which interface of this device, I am connected to know
-I know not how to telnet (using putty)
-I can prompt CMD and ipconfig/all to get my information from devices (and default gateway)
-I understand ping/apr/cdp neighbors
However, using these tools, I can't quite seem to put togeather how to find the next immediate device and the port I am connected to without that direct switch IP address on site.
Make sure that the Cisco Discovery Protocol (CDP) is enabled globally on the switch (run cdp) and on each port (cdp enable). These are the default settings, but may have been disabled for security reasons. Launch Wireshark, filter by cdp packet type and move from one port to the other. Give CDP packets you change your name, IP, IOS version management, and what port you are connected to (among others).
Tags: Cisco Network
Similar Questions
-
What devices transmit Frame Relay and how Frame Relay attached to your computer.
What devices transmit Frame Relay and how Frame Relay link your computer to the internet provider server?
OT: What devices transmit Frame Relay and how Frame Relay link your computer to the internet provider server?
Hello
Frame Relay is a standardized wide area network technology that specifies layers linking physical and logical channels of digital communications using a methodology of packet switching. Originally designed for transport in Integrated Services (ISDN) digital network infrastructure, it can be used today in the context of many other network interfaces.
Network providers commonly implement Frame Relay for voice (see) and data as encapsulation technique, used between local area networks (LAN) over a wide area network (WAN). Each end-user gets a private line (or leased line) to a frame relay node. The Frame Relay network handles the transmission on a frequently changing path transparent to all end-users.
Reference: Frame relay applications
http://TechNet.Microsoft.com/en-us/library/bb726928.aspx -
Hello
I'm "net.rim.device.api.io.ConnectionClosedException: Connection closed" exception so that he was trying to get the response code in the following code snippet. What will be the reason for this exception: -.
HttpConnection connection=(HttpConnection)Connector.open(url); System.out.println("Post-----------------------1"); connection.setRequestMethod(HttpConnection.POST); System.out.println("Post-----------------------2"); connection.setRequestProperty("Content-Type",aRequest.getContentType()); System.out.println("Post-----------------------3"); Hashtable header=aRequest.getHeader(); if(header!=null) { Enumeration enumeration =header.keys(); while(enumeration.hasMoreElements()) { String headerStr=(String)enumeration.nextElement(); String headerValue=(String)header.get(headerStr); //System.out.println("header:"+headerStr+"headerval::"+headerValue); connection.setRequestProperty(headerStr,headerValue); } } System.out.println("Post-----------------------4"); OutputStream postRequestOutputStream=connection.openOutputStream(); System.out.println("Post-----------------------4#########"); postRequestOutputStream.write(aRequest.getPostData()); System.out.println("Post-----------------------4%%%%%%%"); postRequestOutputStream.close(); System.out.println("Post-----------------------5"); System.out.println("RES CODE:"+connection.getResponseCode()); InputStream is=connection.openInputStream();
Try opening the InputStream before getResponseCode().
concerning
-
Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port. Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is. Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7. But the installer does not work.
Windows 7 Professional 32 bit.
Hello Graboots,
Thank you for your message. You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer? You can try using a different cable, for this rule as well. Since it is a question of recognition, we remove the external devices before software troubleshooting. Do you get anything when you plug the printer (ie. a tinkle of connection)? Please let us know, we are looking forward to hear back on your part.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
What devices do I need recharge my IPhone aboard safely? The adapters Apple world traveler Kit does not have the I phone. Do I need a separate transformer to step down the voltage from 240 to 110? or does multi auto power?
Products Apple will be operated to 100-240 Volts and 50/60 Hz, so as long as you have a simple adapter to fit the wall socket, the power supply / charger will work everywhere in the world that you can go.
Look closely at the fine print on the AC adapter / charger (you may need a magnifying glass) to confirm.
-
I just upgraded 5 c to 6 s GSM (o2). I have all new versions of itunes ob both devices. When I connect usb a message:-can't use the iphone "iphone" because he needs a newer version of itunes. Help!
But you have the latest version of iTunes on your computer?
-
How can I move apps on my ACER Iconia Tablet 8 from the internal memory to the external micro-SD card installed? Also, can what app I use to connect wireless to my Samsung TV with a dongle on this subject?
official app from Samsung?
https://play.Google.com/store/apps/details?ID=com.Samsung.companion
on applications on SD card, applications of the system (the default application installed) can be moved; downloaded application can be moved if they have options.
settings/applications
Locate the application that you want to move, press and select move to SD card
Note that this move (if possible) a part of the application, most of the files will remain in the internal memory.
-
What devices are supported for an Adobe Air application?
What devices are supported for an Adobe Air application?
A BlackBerry app created with Adobe Air (Air 2.5) work on a BlackBerry 9900 for example?
Thank you.
Only phones PlayBook and BB10
-
What happens if I am connected to the internet through two different sources or more?
What happens if I am connected to the internet through two different sources or more?
You get Internet from two sources. What did you expect to happen?
This is not double the speed of anything...
-
What is no-WINS node? Does this mean he does not broadcast server service and the WINS service to resolve a name to intellectual property?
Hi Adam,.
essentially servers (nodes) Wins, run a program that turns the words we type in on Internet:
(ESPN.com) in the actual physical address of ESPN.com servers.
So no Wins use only the real 119.97.555.34 (not a real address) instead of ESPN.com words
B Eddie
-
How to see what devices people open my emails of in Eloqua?
Hello
Does anyone know a preview report can I use to see what devices people use to open my mails (or anything else)? We have just the basic licence, no Analyzer.
Thank you very much
Alex
I don't think that such a report exists in Eloqua today.
-
What devices can I download Adobe Comp CC?
What devices can download adobe comp cc on?
Adobe Comp CC is currently available for the iPad. (Several people have expressed the desire that she too be on Android devices. Adobe begins to move some of their mobile applications for Android now.)
-
Node connectivity error check beforehand in the installation of the grid
Hello
I am doing 2 node rac on oracle grid installation VMware(version-4.2) installation - 11.2
My runcluvfy has been a success, here are the details. But when I started my installation of grid, that she didn't diligence node connectivity failure. It's because of VIP of the two nodes? Can I ignore this error and go further? Please guide me on this
=======================================================================================================================================================
[oracle@rac3 grid] $ clusterverify_new4.log more
Conducting due diligence to install cluster services
Audit accessibility of node...
Check: Accessibility of node of the node "rac3.
Accessible destination node?
------------------------------------ ------------------------
rac3 yes
rac4 yes
Result: Check accessibility node from node 'rac3.
Verify the equivalence of the user...Check: Equivalence of the user for the user 'oracle '.
Comment by node name
------------------------------------ ------------------------
RAC4 spent
RAC3 spent
Result: Use equivalence CONTROL passed to user 'oracle '.Verify node connectivity...
Checking the configuration of the hosts file...
Name of State comment node
------------ ------------------------ ------------------------
RAC4 spent
RAC3 spentThe hosts config file verification successful
Interface of the node information "rac4.
Name address IP subnet gateway Gateway bat HW address MTU
------ --------------- --------------- --------------- --------------- ----------------- ------
192.168.1.111 eth0 192.168.1.0 0.0.0.0 192.168.1.1 08:00:27:D7:DD:28 1500
Interface of the node information "rac3.
Name address IP subnet gateway Gateway bat HW address MTU
------ --------------- --------------- --------------- --------------- ----------------- ------
192.168.1.101 eth0 192.168.1.0 0.0.0.0 192.168.1.1 08:00:27:12:7 C: 93 1500
eth1 192.168.2.101 192.168.2.0 0.0.0.0 192.168.1.1 08:00:27:98:E0:86 1500
Check: Subnet node connectivity "192.168.1.0.
Source Destination connected?
------------------------------ ------------------------------ ----------------
RAC4:eth0 rac3:eth0 Yes
Result: Connectivity node passed to subnet "192.168.1.0" with one or more nodes rac4, rac3
Check: The subnet "192.168.1.0" TCP connectivity
Source Destination connected?
------------------------------ ------------------------------ ----------------
RAC3:192.168.1.101 rac4:192.168.1.111 spent
Result: Check of TCP connectivity spent for subnet "192.168.1.0.
Check: Subnet node connectivity "192.168.2.0.
Result: Connectivity node passed to subnet "192.168.2.0' with one or more nodes rac3
Check: The subnet "192.168.2.0 TCP connectivity.
Result: Check of TCP connectivity spent for subnet "192.168.2.0.
The interfaces on the subnet "192.168.1.0" who are likely candidates for VIP are:
eth0:192.168.1.111 RAC4
RAC3 eth0:192.168.1.101CAUTION:
Could not find an appropriate interface for the private interconnection rangeResult: Check connectivity node passed
Check: Total memory
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 1.98 GB (2075468,0 KB) increased from 1.5 GB (1572864,0 KB)
RAC3 1.98 GB (2075468,0 KB) increased from 1.5 GB (1572864,0 KB)
Result: The total past memory checkCheck: Available memory
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 transmitted 1.87 GB (KB 1959736,0) 50 MB (51200,0 KB)
RAC3 1.84 GB (1931904,0 KB) sent 50 MB (51200,0 KB)
Result: Available past memory checkCheck: Swap space
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 3.94 GB (4128760,0 KB) from 2.97 GB (3113202,0 KB)
RAC3 3.94 GB (4128760,0 KB) from 2.97 GB (3113202,0 KB)
Result: Check the Swap space pastCheck: Disk space for "rac4: / tmp '.
Path of comment required node name Mount point available
---------------- ------------ ------------ ------------ ------------ ------------
rac4/tmp / spent 11,49 GB 1 GB
Result: Free past to check the disk space ' rac4: / tmp '.Check: Disk space for "rac3: / tmp '.
Path of comment required node name Mount point available
---------------- ------------ ------------ ------------ ------------ ------------
rac3/tmp / spent 16,66 GB 1 GB
Result: Free past to check the disk space ' rac3: / tmp '.Check: Existence of user for 'oracle '.
Name of State comment node
------------ ------------------------ ------------------------
RAC4 are past
RAC3 is past
Result: Use CONTROL existence increased for 'oracle '.Check: Existence of group 'oinstall '.
Name of State comment node
------------ ------------------------ ------------------------
RAC4 are past
RAC3 is past
Result: Existence of group check passed for "oinstall".Check: Existence of group for "dba".
Name of State comment node
------------ ------------------------ ------------------------
RAC4 are past
RAC3 is past
Result: Existence of group check passed for "dba".Check: Members of the user 'oracle' in group 'oinstall' [primary]
Name of node user is group is user in the main group comment
---------------- ------------ ------------ ------------ ------------ ------------
Yes Yes Yes Yes past RAC4
Yes Yes Yes Yes past RAC3
Result: Membership check for user 'oracle' in group 'oinstall' [as Primary] pastCheck: Membership of the 'oracle' user group 'dba '.
Name of node user is group is user in the comments group
---------------- ------------ ------------ ------------ ----------------
Yes Yes Yes past RAC4
RAC3 Yes Yes Yes past
Result: Membership check for user 'oracle' in group 'dba' spentTick: Run level
Name of the node run level comment required
------------ ------------------------ ------------------------ ----------
rac4 5 3,5 passed
rac3 5 3,5 passed
Result: Run control the level of the pastCheck: Hard limits for "file descriptors open maximum".
Name of node Type available comment required
---------------- ------------ ------------ ------------ ----------------
65536 65536 hard RAC4 spent
65536 65536 hard RAC3 spent
Result: Verification of limits hard to last for "maximum open file descriptors.Check: Limits Soft for "file descriptors open maximum".
Name of node Type available comment required
---------------- ------------ ------------ ------------ ----------------
1024 1024 soft RAC4 spent
1024 1024 soft RAC3 spent
Result: Soft limits check passed for "file descriptors open maximum".Check: Hard limits for "maximum user processes.
Name of node Type available comment required
---------------- ------------ ------------ ------------ ----------------
16384 16384 hard RAC4 spent
16384 16384 hard RAC3 spent
Result: Verification of limits hard to last for "maximum user process.Check: Limits Soft for "maximum user process.
Name of node Type available comment required
---------------- ------------ ------------ ------------ ----------------
2047 2047 soft RAC4 spent
2047 2047 soft RAC3 spent
Result: Soft limits check passed for "maximum user process.Control: System Architecture
Name of node available comment required
------------ ------------------------ ------------------------ ----------
I686, x 86 RAC4 spent
RAC3 i686 x 86 spent
Result: Verification of the system architecture pastControl: Kernel Version
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 2.6.18 - 2.6.18 194.el5 spent
RAC3 2.6.18 - 2.6.18 194.el5 spent
Result: Last kernel version controlCheck: Parameter of kernel for 'semmsl.
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 250 250 spent
RAC3 250 250 spent
Result: Check of kernel parameter passed to "semmsl.Check: Parameter of kernel for 'semmns.
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 32000 32000 spent
RAC3 32000 32000 spent
Result: Check kernel parameter passed to "semmns.Check: Parameter of kernel for 'semopm.
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 100 100 spent
RAC3 100 100 spent
Result: Check kernel parameter passed to "semopm.Check: Parameter of kernel for 'semmni.
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 128 128 spent
RAC3 128 128 spent
Result: Check of kernel parameter passed to "semmni.Check: "Package" kernel parameter
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 536870912 1054504960 spent
RAC3 536870912 1054504960 spent
Result: Check of kernel parameter passed to 'package '.Check: Parameter of kernel for "shmmni(5)."
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 4096 4096 spent
RAC3 4096 4096 spent
Result: Check of kernel parameter passed to 'shmmni(5) '.Check: "Shmall" kernel parameter
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 2097152 2097152 spent
RAC3 2097152 2097152 spent
Result: Check kernel parameter passed to "shmall.Check: Parameter of kernel "file-max.
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 6815744 6815744 spent
RAC3 6815744 6815744 spent
Result: Check of kernel parameter passed to 'file-max.Check: "Ip_local_port_range" kernel parameter
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
Between 9000 & 65500 RAC4 between 9000 & 65500 past
Between 9000 & 65500 RAC3 between 9000 & 65500 past
Result: Check of kernel parameter passed to «ip_local_port_range»Check: Parameter of kernel for "rmem_default."
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 262144 262144 spent
RAC3 262144 262144 spent
Result: Check of kernel parameter passed to 'rmem_default '.Check: "Rmem_max" kernel parameter
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 4194304 4194304 spent
RAC3 4194304 4194304 spent
Result: Check of kernel parameter passed to «rmem_max»Check: Parameter of kernel for "wmem_default."
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 262144 262144 spent
RAC3 262144 262144 spent
Result: Check of kernel parameter passed to 'wmem_default '.Check: "Wmem_max" kernel parameter
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 1048576 1048586 spent
RAC3 1048576 1048586 spent
Result: Check kernel parameter passed to "wmem_max.Check: Parameter of kernel for "aio-max-nr.
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 1048576 1048576 spent
RAC3 1048576 1048576 spent
Result: Check of kernel parameter passed to "aio-max-nr.Check: Existence of package for "make - 3.81.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
Make RAC4 make - 3.81 - 3.el5 - 3.81 spent
RAC3 make - 3.81 - 3.el5 make - 3.81 spent
Result: Package of verification of the past existence to 'make - 3.81.Check: Existence of package for ' binutils - 2.17.50.0.6.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
binutils - 2.17.50.0.6 - 14.el5 binutils - 2.17.50.0.6 spent RAC4
binutils - 2.17.50.0.6 - 14.el5 binutils - 2.17.50.0.6 spent RAC3
Result: Package of verification of the past for existence ' binutils - 2.17.50.0.6.Check: Existence of package for "gcc - 4.1.2.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
4.1.2 - gcc - 48.el5 gcc - 4.1.2 spent RAC4
4.1.2 - gcc - 48.el5 gcc - 4.1.2 spent RAC3
Result: Package of verification of the past for existence ' gcc - 4.1.2.Check: Package of existence ' gcc - c++ - 4.1.2.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 CCG - c++ - 4.1.2 - 48.el5 gcc - c++ - 4.1.2 spent
RAC3 CCG - c++ - 4.1.2 - 48.el5 gcc - c++ - 4.1.2 spent
Result: Package of verification of the past for existence ' gcc - c++ - 4.1.2.Check: Existence of package for "libgomp - 4.1.2.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 4.4.0 - libgomp - libgomp - 4.1.2 spent 6.el5
RAC3 4.4.0 - libgomp - libgomp - 4.1.2 spent 6.el5
Result: Package of verification of the past for existence "libgomp - 4.1.2.Check: Existence of package for "libaio - 0.3.106.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
from RAC4 libaio - 0.3.106 - 5 libaio - 0.3.106
from RAC3 libaio - 0.3.106 - 5 libaio - 0.3.106
Result: Package of verification of the past for existence "libaio - 0.3.106.Check: Existence of package "24 / 2.5 / glibc.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past RAC4 glibc - 2.5 - 49 glibc-2, 5-24
past of RAC3 glibc - 2.5 - 49 glibc-2, 5-24
Result: Package check existence for "glibc-2, 5-24.Check: Package of existence "compat-libstdc ++ - 33 - 3.2.3.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 compat-libstdc ++-33 - 3.2.3 - 61 compat-libstdc ++-33 - 3.2.3 spent
RAC3 compat-libstdc ++-33 - 3.2.3 - 61 compat-libstdc ++-33 - 3.2.3 spent
Result: Package of checking for "compat-libstdc ++ - 33 - 3.2.3.Check: Existence of package for "elfutils-libelf-0, 125.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 elfutils-libelf-0, 137 - 3.el5 elfutils-libelf-0, 125 past
RAC3 elfutils-libelf-0, 137 - 3.el5 elfutils-libelf-0, 125 past
Result: Package of verification of the past for existence "elfutils-libelf-0, 125.Check: Existence of package for "elfutils-libelf-devel-0, 125.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 elfutils-libelf-devel-0, 137 - 3.el5 elfutils-libelf-devel-0, 125 past
RAC3 elfutils-libelf-devel-0, 137 - 3.el5 elfutils-libelf-devel-0, 125 past
Result: Package of verification of the past for existence "elfutils-libelf-devel-0, 125.Check: Existence of package for ' glibc-common - 2.5.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
from RAC4 glibc-common - 2.5 - 49 glibc-common - 2.5
from RAC3 glibc-common - 2.5 - 49 glibc-common - 2.5
Result: Package of verification of the past for existence ' glibc-common - 2.5.Check: Existence of package for ' glibc-devel - 2.5.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
from RAC4 glibc-devel - 2.5 - 49 glibc-devel - 2.5
from RAC3 glibc-devel - 2.5 - 49 glibc-devel - 2.5
Result: Package of verification of the past for existence ' glibc-devel - 2.5.Check: Existence of package for ' glibc-headers - 2.5.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
from RAC4 headers glibc - 2.5 - 49 glibc-headers - 2.5
from RAC3 headers glibc - 2.5 - 49 glibc-headers - 2.5
Result: Package of verification of the past for existence ' glibc-headers - 2.5.Check: Existence of package for "libaio-devel - 0.3.106.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
from RAC4 libaio-devel - 0.3.106 - 5 libaio-devel - 0.3.106
from RAC3 libaio-devel - 0.3.106 - 5 libaio-devel - 0.3.106
Result: Package of verification of the past for existence "libaio-devel - 0.3.106.Check: Existence of package for "4.1.2 - libgcc '.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
4.1.2 - libgcc - 48.el5 libgcc - 4.1.2 spent RAC4
4.1.2 - libgcc - 48.el5 libgcc - 4.1.2 spent RAC3
Result: Package of verification of the past for existence ' libgcc - 4.1.2.Check: Package of existence ' libstdc ++-4.1.2.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 libstdc ++ - 4.1.2 - 48.el5 libstdc ++-4.1.2 spent
RAC3 libstdc ++ - 4.1.2 - 48.el5 libstdc ++-4.1.2 spent
Result: Package of verification of the past for existence ' libstdc ++-4.1.2.Check: Package of existence ' libstdc ++ - devel - 4.1.2.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 libstdc ++ - devel - 4.1.2 - 48.el5 libstdc ++ - devel - 4.1.2 spent
RAC3 libstdc ++ - devel - 4.1.2 - 48.el5 libstdc ++ - devel - 4.1.2 spent
Result: Package of verification of the past for existence ' libstdc ++ - devel - 4.1.2.Check: Existence of package for "sysstat - 7.0.2.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
from RAC4 sysstat - 7.0.2 - 3.el5 sysstat - 7.0.2
from RAC3 sysstat - 7.0.2 - 3.el5 sysstat - 7.0.2
Result: Package of checking for "sysstat - 7.0.2.Check: Existence of package for "unixODBC - 2.2.11.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 unixODBC - 2.2.11 - unixODBC - 2.2.11 spent 7.1
RAC3 unixODBC - 2.2.11 - unixODBC - 2.2.11 spent 7.1
Result: Package of verification of the past for existence "unixODBC - 2.2.11.Check: Existence of package for "unixODBC-devel - 2.2.11.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4, unixODBC unixODBC-devel-2.2.11-7.1-devel-2.2.11 spent
RAC3, unixODBC unixODBC-devel-2.2.11-7.1-devel-2.2.11 spent
Result: Package of verification of the past for existence "unixODBC-devel - 2.2.11.Check: Existence of package for 'ksh-20060214.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
from RAC4, ksh ksh-20100202 - 1.el5 - 20060214
from RAC3, ksh ksh-20100202 - 1.el5 - 20060214
Result: Package of checking for "ksh-20060214"Check for multiple users with the value of the UID 0
Result: Check for multiple users with the value of the UID 0 pastCheck: The current group ID
Result: Control of current past group ID
Base file name consistency check model...
Check the consistency of spent Core file name pattern.Check to make sure that the 'oracle' user is not in group "root".
Name of State comment node
------------ ------------------------ ------------------------
RAC4 are not past
RAC3 is not past
Result: The user 'oracle' is no not part of the group 'root '. Check the pastAudit default user file creation mask
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 0022 0022 spent
RAC3 0022 0022 spent
Result: Mask by default user file creation passed VerificationStarting synchronization check by using the Network Time Protocol (NTP)...
Of NTP Configuration file check has started...
File configuration network time Protocol (NTP) could not be found on one of the nodes. Oracle Cluster time
Synchronization service (CTSS) may be used instead of NTP to synchronize the time on the cluster
nodesResult: Control of synchronization using Network Time Protocol (NTP) spent
Check beforehand for cluster services Setup was successful.===============================================================================================================================================================
Kind regards
user10341747 wrote:
Hello pradeep,.
[oracle@rac3 grid] $ cat/etc/hosts
# Do not remove the next line, or various programs
# requiring a network functionality will fail.
127.0.0.1 localhost.localdomain localhost# Public
192.168.1.101 rac3 rac3.localdomain
192.168.1.111 rac4 rac4.localdomain
# Private
192.168.2.101 priv.localdomain - rac3 rac3-priv
192.168.2.111 priv.localdomain - rac4 rac4-priv
# Virtual
192.168.2.113 vip.localdomain - rac3 rac3-vip
192.168.2.114 vip.localdomain - rac4 rac4-vip
# SCAN
192.168.2.201 rac - scan.localdomain rac-scan
[oracle@rac3 grid] $You have a problem with IP addresses:
Use * 192.168.2 for private, virtual, and scan?
Public, virtual and SCAN IPs must be the same private network is must be different.
He warns here, out of cluvfy:
The interfaces on the subnet "192.168.1.0" who are likely candidates for VIP are:
eth0:192.168.1.111 RAC4
RAC3 eth0:192.168.1.101CAUTION:
Could not find an appropriate interface for the private interconnection rangeResult: Check connectivity node passed
You can change as below
# Public
192.168.1.101 rac3 rac3.localdomain
192.168.1.111 rac4 rac4.localdomain
# Private
192.168.2.101 priv.localdomain - rac3 rac3-priv
192.168.2.111 priv.localdomain - rac4 rac4-priv
# Virtual
192.168.1.113 vip.localdomain - rac3 rac3-vip
192.168.1.114 vip.localdomain - rac4 rac4-vip
# SCAN
192.168.1.201 rac - rac-scan scan.localdomain
Concerning
Mr. Mahir Quluzade
-
What is the cluster node and which is a member of the cluster?
What is the cluster node and which is a member of the cluster?
How to differentiate them?I agree with you all.
But note that a node is a server JVM. A large number of nodes can co-locate in the same machine. Entire application process or the server that is running software consistency is called a cluster node.
But Member and the cluster node is different concepts. Consistency is logically divided into clusters, services and caches. A cluster of coherence is a group of cluster nodes that share a group address, allowing you to communicate, the cluster nodes. Generally, a cluster node will join only a single cluster, but it is possible for a cluster node to join (membership) several different groups, using a different group for each cluster address.Fran
-
remote device does not accept connections is the error that I also get what is a proxy?
There are some sites that I can't connect to Internet, I get remote device will not accept the connection and check the proxy. I don't know how to solve this problem, I don't know what is a remote device, and I don't know if I have a proxy. Please help, I work on surveys and freelancing and you need to get to my sites. I thank very you much for any help you can give me.
This just sounds like your Internet is cut, not a Firefox problem.
But I'd still Try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).
If Firefox is open, you can restart Firefox Safe mode in the Help menu:
- Click the menu button
click Help
then select restart with disabled modules.
If Firefox does not work, you can start Firefox in Mode safe as follows:
- On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
When the Firefox Safe Mode window appears, select "start mode safe."
If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
When find you what is causing your problems, please let us know. This might help others with the same problem.
- Click the menu button
Maybe you are looking for
-
deleted iPhoto, it needs for Mac 10.9.5
iPhoto not deleted, no available photos app. What version, and hence, what I download for Mac 10.9.5. Thank you!
-
Satellite P100-257 - how to turn on Bluetooth?
My bluetooth device has not worked for some time. When I looked in the Device Manager, there is no bluetooth icon. When I tried to install the bluetooth for Windows by Toshiba stack, the following message appeared: 'Please activate the bluetooth modu
-
Cannot send emails using Microsoft Outlook Express due to an "error number: 0x800CCC0D.
I GET THE ERROR MESSAGE AFTER EVERY TIME THAT I TRYING TO SEND AN EMAIL THROUGH OUTLOOK EXPRESS. Please help me: = MY ADDRESS EMAIL IS CORRECT: * e-mail address is removed from the privacy *.HE DIDN'T THERE HAS NO INFORMATION AS TO HOW TO CORRECT AN
-
hardware nokia 5800 expressmusic
I am trying to install a driver for the nokia 5800, but without success. I tried all alternatives to solve the problem but nothing worked. I want to use this phone as a modem, but without the driver, it is not detected by the software.
-
Cannot install Windows update, error: 80070490
Original title: error 80070490 Windows will not run updates. Get error 80070490. I've done all the troubleshooting that was proposed and nothing works. Has anyone else got this specific error?