Node connectivity error check beforehand in the installation of the grid
Hello
I am doing 2 node rac on oracle grid installation VMware(version-4.2) installation - 11.2
My runcluvfy has been a success, here are the details. But when I started my installation of grid, that she didn't diligence node connectivity failure. It's because of VIP of the two nodes? Can I ignore this error and go further? Please guide me on this
=======================================================================================================================================================
[oracle@rac3 grid] $ clusterverify_new4.log more
Conducting due diligence to install cluster services
Audit accessibility of node...
Check: Accessibility of node of the node "rac3.
Accessible destination node?
------------------------------------ ------------------------
rac3 yes
rac4 yes
Result: Check accessibility node from node 'rac3.
Verify the equivalence of the user...
Check: Equivalence of the user for the user 'oracle '.
Comment by node name
------------------------------------ ------------------------
RAC4 spent
RAC3 spent
Result: Use equivalence CONTROL passed to user 'oracle '.
Verify node connectivity...
Checking the configuration of the hosts file...
Name of State comment node
------------ ------------------------ ------------------------
RAC4 spent
RAC3 spent
The hosts config file verification successful
Interface of the node information "rac4.
Name address IP subnet gateway Gateway bat HW address MTU
------ --------------- --------------- --------------- --------------- ----------------- ------
192.168.1.111 eth0 192.168.1.0 0.0.0.0 192.168.1.1 08:00:27:D7:DD:28 1500
Interface of the node information "rac3.
Name address IP subnet gateway Gateway bat HW address MTU
------ --------------- --------------- --------------- --------------- ----------------- ------
192.168.1.101 eth0 192.168.1.0 0.0.0.0 192.168.1.1 08:00:27:12:7 C: 93 1500
eth1 192.168.2.101 192.168.2.0 0.0.0.0 192.168.1.1 08:00:27:98:E0:86 1500
Check: Subnet node connectivity "192.168.1.0.
Source Destination connected?
------------------------------ ------------------------------ ----------------
RAC4:eth0 rac3:eth0 Yes
Result: Connectivity node passed to subnet "192.168.1.0" with one or more nodes rac4, rac3
Check: The subnet "192.168.1.0" TCP connectivity
Source Destination connected?
------------------------------ ------------------------------ ----------------
RAC3:192.168.1.101 rac4:192.168.1.111 spent
Result: Check of TCP connectivity spent for subnet "192.168.1.0.
Check: Subnet node connectivity "192.168.2.0.
Result: Connectivity node passed to subnet "192.168.2.0' with one or more nodes rac3
Check: The subnet "192.168.2.0 TCP connectivity.
Result: Check of TCP connectivity spent for subnet "192.168.2.0.
The interfaces on the subnet "192.168.1.0" who are likely candidates for VIP are:
eth0:192.168.1.111 RAC4
RAC3 eth0:192.168.1.101
CAUTION:
Could not find an appropriate interface for the private interconnection range
Result: Check connectivity node passed
Check: Total memory
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 1.98 GB (2075468,0 KB) increased from 1.5 GB (1572864,0 KB)
RAC3 1.98 GB (2075468,0 KB) increased from 1.5 GB (1572864,0 KB)
Result: The total past memory check
Check: Available memory
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 transmitted 1.87 GB (KB 1959736,0) 50 MB (51200,0 KB)
RAC3 1.84 GB (1931904,0 KB) sent 50 MB (51200,0 KB)
Result: Available past memory check
Check: Swap space
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 3.94 GB (4128760,0 KB) from 2.97 GB (3113202,0 KB)
RAC3 3.94 GB (4128760,0 KB) from 2.97 GB (3113202,0 KB)
Result: Check the Swap space past
Check: Disk space for "rac4: / tmp '.
Path of comment required node name Mount point available
---------------- ------------ ------------ ------------ ------------ ------------
rac4/tmp / spent 11,49 GB 1 GB
Result: Free past to check the disk space ' rac4: / tmp '.
Check: Disk space for "rac3: / tmp '.
Path of comment required node name Mount point available
---------------- ------------ ------------ ------------ ------------ ------------
rac3/tmp / spent 16,66 GB 1 GB
Result: Free past to check the disk space ' rac3: / tmp '.
Check: Existence of user for 'oracle '.
Name of State comment node
------------ ------------------------ ------------------------
RAC4 are past
RAC3 is past
Result: Use CONTROL existence increased for 'oracle '.
Check: Existence of group 'oinstall '.
Name of State comment node
------------ ------------------------ ------------------------
RAC4 are past
RAC3 is past
Result: Existence of group check passed for "oinstall".
Check: Existence of group for "dba".
Name of State comment node
------------ ------------------------ ------------------------
RAC4 are past
RAC3 is past
Result: Existence of group check passed for "dba".
Check: Members of the user 'oracle' in group 'oinstall' [primary]
Name of node user is group is user in the main group comment
---------------- ------------ ------------ ------------ ------------ ------------
Yes Yes Yes Yes past RAC4
Yes Yes Yes Yes past RAC3
Result: Membership check for user 'oracle' in group 'oinstall' [as Primary] past
Check: Membership of the 'oracle' user group 'dba '.
Name of node user is group is user in the comments group
---------------- ------------ ------------ ------------ ----------------
Yes Yes Yes past RAC4
RAC3 Yes Yes Yes past
Result: Membership check for user 'oracle' in group 'dba' spent
Tick: Run level
Name of the node run level comment required
------------ ------------------------ ------------------------ ----------
rac4 5 3,5 passed
rac3 5 3,5 passed
Result: Run control the level of the past
Check: Hard limits for "file descriptors open maximum".
Name of node Type available comment required
---------------- ------------ ------------ ------------ ----------------
65536 65536 hard RAC4 spent
65536 65536 hard RAC3 spent
Result: Verification of limits hard to last for "maximum open file descriptors.
Check: Limits Soft for "file descriptors open maximum".
Name of node Type available comment required
---------------- ------------ ------------ ------------ ----------------
1024 1024 soft RAC4 spent
1024 1024 soft RAC3 spent
Result: Soft limits check passed for "file descriptors open maximum".
Check: Hard limits for "maximum user processes.
Name of node Type available comment required
---------------- ------------ ------------ ------------ ----------------
16384 16384 hard RAC4 spent
16384 16384 hard RAC3 spent
Result: Verification of limits hard to last for "maximum user process.
Check: Limits Soft for "maximum user process.
Name of node Type available comment required
---------------- ------------ ------------ ------------ ----------------
2047 2047 soft RAC4 spent
2047 2047 soft RAC3 spent
Result: Soft limits check passed for "maximum user process.
Control: System Architecture
Name of node available comment required
------------ ------------------------ ------------------------ ----------
I686, x 86 RAC4 spent
RAC3 i686 x 86 spent
Result: Verification of the system architecture past
Control: Kernel Version
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 2.6.18 - 2.6.18 194.el5 spent
RAC3 2.6.18 - 2.6.18 194.el5 spent
Result: Last kernel version control
Check: Parameter of kernel for 'semmsl.
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 250 250 spent
RAC3 250 250 spent
Result: Check of kernel parameter passed to "semmsl.
Check: Parameter of kernel for 'semmns.
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 32000 32000 spent
RAC3 32000 32000 spent
Result: Check kernel parameter passed to "semmns.
Check: Parameter of kernel for 'semopm.
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 100 100 spent
RAC3 100 100 spent
Result: Check kernel parameter passed to "semopm.
Check: Parameter of kernel for 'semmni.
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 128 128 spent
RAC3 128 128 spent
Result: Check of kernel parameter passed to "semmni.
Check: "Package" kernel parameter
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 536870912 1054504960 spent
RAC3 536870912 1054504960 spent
Result: Check of kernel parameter passed to 'package '.
Check: Parameter of kernel for "shmmni(5)."
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 4096 4096 spent
RAC3 4096 4096 spent
Result: Check of kernel parameter passed to 'shmmni(5) '.
Check: "Shmall" kernel parameter
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 2097152 2097152 spent
RAC3 2097152 2097152 spent
Result: Check kernel parameter passed to "shmall.
Check: Parameter of kernel "file-max.
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 6815744 6815744 spent
RAC3 6815744 6815744 spent
Result: Check of kernel parameter passed to 'file-max.
Check: "Ip_local_port_range" kernel parameter
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
Between 9000 & 65500 RAC4 between 9000 & 65500 past
Between 9000 & 65500 RAC3 between 9000 & 65500 past
Result: Check of kernel parameter passed to «ip_local_port_range»
Check: Parameter of kernel for "rmem_default."
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 262144 262144 spent
RAC3 262144 262144 spent
Result: Check of kernel parameter passed to 'rmem_default '.
Check: "Rmem_max" kernel parameter
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 4194304 4194304 spent
RAC3 4194304 4194304 spent
Result: Check of kernel parameter passed to «rmem_max»
Check: Parameter of kernel for "wmem_default."
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 262144 262144 spent
RAC3 262144 262144 spent
Result: Check of kernel parameter passed to 'wmem_default '.
Check: "Wmem_max" kernel parameter
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 1048576 1048586 spent
RAC3 1048576 1048586 spent
Result: Check kernel parameter passed to "wmem_max.
Check: Parameter of kernel for "aio-max-nr.
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 1048576 1048576 spent
RAC3 1048576 1048576 spent
Result: Check of kernel parameter passed to "aio-max-nr.
Check: Existence of package for "make - 3.81.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
Make RAC4 make - 3.81 - 3.el5 - 3.81 spent
RAC3 make - 3.81 - 3.el5 make - 3.81 spent
Result: Package of verification of the past existence to 'make - 3.81.
Check: Existence of package for ' binutils - 2.17.50.0.6.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
binutils - 2.17.50.0.6 - 14.el5 binutils - 2.17.50.0.6 spent RAC4
binutils - 2.17.50.0.6 - 14.el5 binutils - 2.17.50.0.6 spent RAC3
Result: Package of verification of the past for existence ' binutils - 2.17.50.0.6.
Check: Existence of package for "gcc - 4.1.2.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
4.1.2 - gcc - 48.el5 gcc - 4.1.2 spent RAC4
4.1.2 - gcc - 48.el5 gcc - 4.1.2 spent RAC3
Result: Package of verification of the past for existence ' gcc - 4.1.2.
Check: Package of existence ' gcc - c++ - 4.1.2.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 CCG - c++ - 4.1.2 - 48.el5 gcc - c++ - 4.1.2 spent
RAC3 CCG - c++ - 4.1.2 - 48.el5 gcc - c++ - 4.1.2 spent
Result: Package of verification of the past for existence ' gcc - c++ - 4.1.2.
Check: Existence of package for "libgomp - 4.1.2.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 4.4.0 - libgomp - libgomp - 4.1.2 spent 6.el5
RAC3 4.4.0 - libgomp - libgomp - 4.1.2 spent 6.el5
Result: Package of verification of the past for existence "libgomp - 4.1.2.
Check: Existence of package for "libaio - 0.3.106.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
from RAC4 libaio - 0.3.106 - 5 libaio - 0.3.106
from RAC3 libaio - 0.3.106 - 5 libaio - 0.3.106
Result: Package of verification of the past for existence "libaio - 0.3.106.
Check: Existence of package "24 / 2.5 / glibc.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past RAC4 glibc - 2.5 - 49 glibc-2, 5-24
past of RAC3 glibc - 2.5 - 49 glibc-2, 5-24
Result: Package check existence for "glibc-2, 5-24.
Check: Package of existence "compat-libstdc ++ - 33 - 3.2.3.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 compat-libstdc ++-33 - 3.2.3 - 61 compat-libstdc ++-33 - 3.2.3 spent
RAC3 compat-libstdc ++-33 - 3.2.3 - 61 compat-libstdc ++-33 - 3.2.3 spent
Result: Package of checking for "compat-libstdc ++ - 33 - 3.2.3.
Check: Existence of package for "elfutils-libelf-0, 125.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 elfutils-libelf-0, 137 - 3.el5 elfutils-libelf-0, 125 past
RAC3 elfutils-libelf-0, 137 - 3.el5 elfutils-libelf-0, 125 past
Result: Package of verification of the past for existence "elfutils-libelf-0, 125.
Check: Existence of package for "elfutils-libelf-devel-0, 125.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 elfutils-libelf-devel-0, 137 - 3.el5 elfutils-libelf-devel-0, 125 past
RAC3 elfutils-libelf-devel-0, 137 - 3.el5 elfutils-libelf-devel-0, 125 past
Result: Package of verification of the past for existence "elfutils-libelf-devel-0, 125.
Check: Existence of package for ' glibc-common - 2.5.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
from RAC4 glibc-common - 2.5 - 49 glibc-common - 2.5
from RAC3 glibc-common - 2.5 - 49 glibc-common - 2.5
Result: Package of verification of the past for existence ' glibc-common - 2.5.
Check: Existence of package for ' glibc-devel - 2.5.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
from RAC4 glibc-devel - 2.5 - 49 glibc-devel - 2.5
from RAC3 glibc-devel - 2.5 - 49 glibc-devel - 2.5
Result: Package of verification of the past for existence ' glibc-devel - 2.5.
Check: Existence of package for ' glibc-headers - 2.5.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
from RAC4 headers glibc - 2.5 - 49 glibc-headers - 2.5
from RAC3 headers glibc - 2.5 - 49 glibc-headers - 2.5
Result: Package of verification of the past for existence ' glibc-headers - 2.5.
Check: Existence of package for "libaio-devel - 0.3.106.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
from RAC4 libaio-devel - 0.3.106 - 5 libaio-devel - 0.3.106
from RAC3 libaio-devel - 0.3.106 - 5 libaio-devel - 0.3.106
Result: Package of verification of the past for existence "libaio-devel - 0.3.106.
Check: Existence of package for "4.1.2 - libgcc '.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
4.1.2 - libgcc - 48.el5 libgcc - 4.1.2 spent RAC4
4.1.2 - libgcc - 48.el5 libgcc - 4.1.2 spent RAC3
Result: Package of verification of the past for existence ' libgcc - 4.1.2.
Check: Package of existence ' libstdc ++-4.1.2.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 libstdc ++ - 4.1.2 - 48.el5 libstdc ++-4.1.2 spent
RAC3 libstdc ++ - 4.1.2 - 48.el5 libstdc ++-4.1.2 spent
Result: Package of verification of the past for existence ' libstdc ++-4.1.2.
Check: Package of existence ' libstdc ++ - devel - 4.1.2.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 libstdc ++ - devel - 4.1.2 - 48.el5 libstdc ++ - devel - 4.1.2 spent
RAC3 libstdc ++ - devel - 4.1.2 - 48.el5 libstdc ++ - devel - 4.1.2 spent
Result: Package of verification of the past for existence ' libstdc ++ - devel - 4.1.2.
Check: Existence of package for "sysstat - 7.0.2.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
from RAC4 sysstat - 7.0.2 - 3.el5 sysstat - 7.0.2
from RAC3 sysstat - 7.0.2 - 3.el5 sysstat - 7.0.2
Result: Package of checking for "sysstat - 7.0.2.
Check: Existence of package for "unixODBC - 2.2.11.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 unixODBC - 2.2.11 - unixODBC - 2.2.11 spent 7.1
RAC3 unixODBC - 2.2.11 - unixODBC - 2.2.11 spent 7.1
Result: Package of verification of the past for existence "unixODBC - 2.2.11.
Check: Existence of package for "unixODBC-devel - 2.2.11.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4, unixODBC unixODBC-devel-2.2.11-7.1-devel-2.2.11 spent
RAC3, unixODBC unixODBC-devel-2.2.11-7.1-devel-2.2.11 spent
Result: Package of verification of the past for existence "unixODBC-devel - 2.2.11.
Check: Existence of package for 'ksh-20060214.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
from RAC4, ksh ksh-20100202 - 1.el5 - 20060214
from RAC3, ksh ksh-20100202 - 1.el5 - 20060214
Result: Package of checking for "ksh-20060214"
Check for multiple users with the value of the UID 0
Result: Check for multiple users with the value of the UID 0 past
Check: The current group ID
Result: Control of current past group ID
Base file name consistency check model...
Check the consistency of spent Core file name pattern.
Check to make sure that the 'oracle' user is not in group "root".
Name of State comment node
------------ ------------------------ ------------------------
RAC4 are not past
RAC3 is not past
Result: The user 'oracle' is no not part of the group 'root '. Check the past
Audit default user file creation mask
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 0022 0022 spent
RAC3 0022 0022 spent
Result: Mask by default user file creation passed Verification
Starting synchronization check by using the Network Time Protocol (NTP)...
Of NTP Configuration file check has started...
File configuration network time Protocol (NTP) could not be found on one of the nodes. Oracle Cluster time
Synchronization service (CTSS) may be used instead of NTP to synchronize the time on the cluster
nodes
Result: Control of synchronization using Network Time Protocol (NTP) spent
Check beforehand for cluster services Setup was successful.
===============================================================================================================================================================
Kind regards
user10341747 wrote:
Hello pradeep,.
[oracle@rac3 grid] $ cat/etc/hosts
# Do not remove the next line, or various programs
# requiring a network functionality will fail.
127.0.0.1 localhost.localdomain localhost# Public
192.168.1.101 rac3 rac3.localdomain
192.168.1.111 rac4 rac4.localdomain
# Private
192.168.2.101 priv.localdomain - rac3 rac3-priv
192.168.2.111 priv.localdomain - rac4 rac4-priv
# Virtual
192.168.2.113 vip.localdomain - rac3 rac3-vip
192.168.2.114 vip.localdomain - rac4 rac4-vip
# SCAN
192.168.2.201 rac - scan.localdomain rac-scan
[oracle@rac3 grid] $
You have a problem with IP addresses:
Use * 192.168.2 for private, virtual, and scan?
Public, virtual and SCAN IPs must be the same private network is must be different.
He warns here, out of cluvfy:
The interfaces on the subnet "192.168.1.0" who are likely candidates for VIP are:
eth0:192.168.1.111 RAC4
RAC3 eth0:192.168.1.101CAUTION:
Could not find an appropriate interface for the private interconnection rangeResult: Check connectivity node passed
You can change as below
# Public
192.168.1.101 rac3 rac3.localdomain
192.168.1.111 rac4 rac4.localdomain
# Private
192.168.2.101 priv.localdomain - rac3 rac3-priv
192.168.2.111 priv.localdomain - rac4 rac4-priv
# Virtual
192.168.1.113 vip.localdomain - rac3 rac3-vip
192.168.1.114 vip.localdomain - rac4 rac4-vip
# SCAN
192.168.1.201 rac - rac-scan scan.localdomain
Concerning
Mr. Mahir Quluzade
Tags: Database
Similar Questions
-
Connection error: windows cannot load the locally stored profile
original title: connection error
Always get following message when trying to connect to my desktop PC
Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a damaged local profile. If this problem persists, contact your network administrator.
This looks like a corrupted profile. Assuming that you can connect with a user with administrator privileges, do one of the following procedures to restore your profile in the shape. If you are unable to connect, try to connect by using the built-in Administrator account (Ctrl-Alt-Delete struck twice on the login screen, enter the user: administrator, leave blank password unless you have changed at some point)
"How to restore Windows XP to a previous state"
<>http://support.Microsoft.com/kb/306084 >
(works best if you connect with Safe Mode)"How to recover damaged Windows XP user profile"
<>http://support.Microsoft.com/kb/555473 >HTH,
JWPS: Alteration of the disc often accompanies this problem. Don't forget to run a "chkdsk" operation after you recover.
-
Database connection - error of creation of the admin user Setup. No route to host
During step 2: configuration of the database connection we select the "internal database".After a short delay, we get a message saying "error of creation of the admin user. No route to the host.I have been more before DNS records and back and everything seems in good condition.Can someone point me in the right direction to solve this error?
This is an SSL certificate error. Have you changed the default self-signed SSL certificates?
-
Error checking running on the device physics widget
My widget is running in the Simulator, but when I sign and deploy on a physical device I get:
Error at startup Bonneau: Module 'Blabla' has verification error at offset 0316 190 (codfile version 78)
The physical device is a Storm 9500 running 5.0.0.216 on Vodafone Ireland. The first time around I had just used bbwp.exe to do everything. When I got the above error I then used the /s option that bbwp.exe would leave the source generated in place and then used JDE 5.0 beta 2 to generate the .cod file. Same result however.
Tim Neil said in another thread that this error occurs with the first versions of the 5.0 OS. However, my Storm running an official version.
Anyone?
I just sent you a private message with some details. Let me know the results
-
Select all the check box in the grid
Hello
Creating dynamic multiple checkbox which are placed in a table format in the grid.
(a) how to select the check box and clicking a button
(b) how to find how many check box are selected at the click of a button
Thanks in advance
Hi Srinth,
Have you tested the code... He works for you...?
His perfectly straight work on my side...
Thank you
Jean Claude Chari
-
Original title: Bluetooth headset not connecting
I have a Plantronics 9xxBackBeat headset, and I'm trying to connect my laptop (HP Pavilion dv6000)
However, when pairing the headset I gives me the message"Device pairing failed.Matching attempt failed in an unknown error, is the reported error code: 0x80070005Contact the manufacturer of your device. »However, there is no driver for the 9xxBackBeat headphones and when I contacted their support, I'm referred my OS manufacturer, but when I talk about Microsoft, they tell me to go to Plantronics.Can someone tell me please how to fix this error?If it is not a mistake on the side of Plantronic, and if it's not a mistake on the side of Microsoft Windows, and then what happens?Hello
1. are you able to connect other devices via Bluetooth from your computer?
2 - is this compatible with your operating system device?
First thing I suggest you to check the manual and if this device is compatible with your operating system.
I suggest you try the steps mentioned below and check if it helps.
Method 1: The problems with Bluetooth devices: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-Bluetooth-enabled-devices
Method 2: If the problem persists, then try to update driver:
a. click the Start button.
(b) in the search box type devmgmt.msc and then press ENTER.
c. Select Bluetooth peripheral device and right click on it.
d. now, select Update.
e. restart your computer.Method 3: Also I suggest to add as peripheral to your Bluetooth computer and later check the required services running on your computer.
Set up a Bluetooth device:
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device
Change settings for a Bluetooth compatible device:
http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-a-Bluetooth-enabled-device
Hope this information is useful.
-
received invalidVariables error check validate in the assign activity
Hello Oracle BPEL guru,
I have only a few months experience SOA. I have a problem of validation badly need help. It may be a simple question for you.
I am stable and seeking a better solution for our validation registration 834. I am using SOA and JDeveloper version 11.1.1.6.0. For the test, I create a simple Roster.xsd:
<? XML version = "1.0" encoding = "UTF-8"? >
<! - edited with XMLSpy v2013 sp1 (http://www.altova.com) by Li (CGI) NAFTA - >
< xs: schema xmlns: XS = "http://www.w3.org/2001/XMLSchema".
elementFormDefault = "qualified" attributeFormDefault = "unqualified" >
< xs: element name = "Alignment" >
< xs: annotation >
< intention > root comment describing your item < / intention >
< / xs: annotation >
< xs: complexType >
< xs: SEQUENCE >
< xs: element name = "ID" type = "xs: String" / >
< xs: element name = "Gender" >
< xs:simpleType >
< xs:restriction base = "XS: String" >
< xs:enumeration value = 'F' / >
< xs:enumeration value = "M" / >
< / xs:restriction >
< / xs:simpleType >
< / xs: element >
< xs: element name = "Name" >
< xs:simpleType >
< xs:restriction base = "XS: String" >
< xs:minLength value = "5" / >
< xs:maxLength value = "8" / >
< / xs:restriction >
< / xs:simpleType >
< / xs: element >
< xs: element name = "Âge" >
< xs:simpleType >
< xs:restriction base = "XS: Integer" >
< xs:minInclusive value = "0" / >
< xs:maxInclusive value = "120" / >
< / xs:restriction >
< / xs:simpleType >
< / xs: element >
< xs: element name = "DOB" type = "xs: Date" / >
< xs: element name = "Dept_No" >
< xs:simpleType >
< xs:restriction base = "XS: String" >
< xs:enumeration value = "Development" / >
< xs:enumeration value = 'Quality' / >
< xs:enumeration value = "Management" / >
< / xs:restriction >
< / xs:simpleType >
< / xs: element >
< / xs: SEQUENCE >
< / xs: complexType >
< / xs: element >
< / xs: Schema >
I've created a good data and bad news. reliable data are here, TestData_good.xml
<? XML version = "1.0" encoding = "UTF-8"? >
< list xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance".
xsi:noNamespaceSchemaLocation = "xsd/Roster.xsd" > "
< ID > 12345 / < ID >
< sex > F < / Type >
< name > Jimmy Li < / name >
<>26 < / Age >
< DOB > 1988 - 01 - 01 < / DOB >
Quality of < Dept_No > < / Dept_No >
< / list >
I have create a BPEL to read a TestData_good.xml folder and write to another file. I have assign activity to assign the xml content. It works very well without validation. I see the file are written with a different name.
Problem is when I check the post in the activity assign, general tab. It fails validation. But the data is good, as you can see in this mail and I validated at design time. I think it good pass, but fails in the incorrect data. But it fails in the right data now. The error messages here:
Error message: {http://schemas.oracle.com/bpel/extension} invalidVariables
Error default/TestValidation2!1.0*soa_7e318e4a-8cf7-4dc1-b265-31e0e3d9ce7e/BPELProcess1/20016-BpAss0-BpSeq0.3-2 ID
Lack of time March 4, 2013 21:58:51
Anomaly of the non-recoverable system:
< bpelFault > < faultType > 0 < / faultType > < invalidVariables xmlns = "http://schemas.oracle.com/bpel/extension" > < / invalidVariables > < / bpelFault >
You have no idea what may be wrong?
Thanks in advance for your help,
NAFTAHello
This isn't a namespace schema... You can set a namespace or use an approach as described in the following doc...
https://blogs.Oracle.com/rammenon/entry/handling_no_namespace_schemasSee you soon,.
Vlad -
Connection error: unable to load the user profile
Original title: user account login
When I try to log on my computer I get the message 'service user profile Service has not logon. User profile cannot be loaded. It is my administrater account, sign in. If I log in with a different account and try to access user profiles accounts, when I invite me for the password and enter the password nothing happens. What can I do for this?
I also have Windows Vista.
When I try to log on my computer I get the message 'service user profile Service has not logon. User profile cannot be loaded. It is my administrater account, sign in. If I log in with a different account and try to access user profiles accounts, when I invite me for the password and enter the password nothing happens. What can I do for this?
I also have Windows Vista.
You haveanother admin account , you can connect?
If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.If you don't have another admin account, go into safe mode.
Here's how to get safe mode:
Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with network.In the window of logon in safe mode...
1 can connect to your account administrator in safe mode?
If so, do a restore system first, if no help, run theMicrosoft tutorial support listed below.2. If you can't log into your own account, you see another admin next to your account in the logon screen?
If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and new do a first system restore, if not help, run the Microsoft tutorial support listed below.If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
How to do system restore: http://www.vistax64.com/tutorials/76905-system-restore-how.htmlTutorial from Microsoft support :
http://support.Microsoft.com/kb/947215
There are several methods,go through one by one.
Method 3 has a "fix it for me" applicationFor the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
Network connectivity error when you configure the server for vSphere
I've just set up my first hypervisor, and naturally it became painfully obvious how much I have to learn.
I met a problem that I don't know how to fix. When you configure the server, I have configured network settings manually in order to give him the good gateway, subnet mask and static IP address. Unfortunately, I still get "Failed" when I ping the DHCP server. ""
Hope that the community will be able to guide me in this problem. I am sure it takes to understand this, so let me know what is needed and how to get more information. Thank you!
Find the person who is responsible for the management of the switch and check which port is set to for example the VLAN you need. Depending on your setting of the port must be configured as an access port or a 802. 1 q port if you configure the VLAN ID on the ESXi host
André
-
Update the Adobe Flash plugin always translates into a connection error
Firefox quote plugin Adobe Flash as being outdated (has happened several times previously); the latest version of the plugin is downloaded (as done successfully many times before). This time, a connection error occurs. Repeat the process several times over several days gives the same results.
More in detail, the smallest prior download EXE which is first downloaded from the Adobe site is able to be downloaded, but by operating it said something like "Download will begin shortly," with the download of the application itself never occurring, and a later message connection error.
Although there seems to be a problem with Adobe, I suppose that other Firefox users would have also encountered this problem and he may know a solution.
Better to use the full installer offline from here:
https://www.Adobe.com/products/flashplayer/distribution3.html -
I get error 0 x 24 in Win XP Home, after the system hung over the error checking.
The system is a HP/Compaq Presario SR1575CL running XP Home Edition with Service Pack 3. There is 2 GB of RAM and a 200 GB drive HARD Seagate SATA 1. I don't have a Win XP Home CD, because the BONE was preloaded on the HARD drive. HP put a section of 6 GB recovery (FAT) in the 1 Partition of the HARD drive. The 180 remaining in 2 GB (NTFS) Partition is for the OS and data. Partition 2 is expected to be the bootable partition. Recovery HP option brings back me to the configuration of the facility six years ago.
I was checking the HARD disk with the error checking feature. The program completed the first three steps of five. The system hung up on step 4.
The system enters a restart loop where I see the screen of the POST, the screen that allows me to choose an operating system (XP Home or Recovery Console), then the window a few seconds start screen. I tried the Recovery Console option and I get the error Mode recovery 0 x 24. I can't use any Safe Mode options, because they also cause a boot loop.
I'm unable to get a command line so that I can try the command fixmbr or fixboot.
I started with the Live CD Knoppix 6,7 and 12 LinuxMint and was able to see and access both partitions of the HARD disk. I was able to copy the contents of the Partition 2 to external USB HDD unsolved. I also made a copy of the MBR using DD.
I ran testdisk_6.13 which shows the parameters C/H/S are 24321/255/63, based on the HARD drive and 25841/240/63 for the NTFS. According to the Seagate, the C/H/S for this Barracuda HARD drive Web site is 16383/16/63, which doesn't have a size for the size of 200 GB. Phoenix Award BIOS shows 65535/16/255.
I want to fix/repair the HARD drive. Data and intact air applications. How recognizable HARD drive again?
Thank you.
Hello
It seems that the hard drive has failed. You will need to replace it as it is not really a way to fix them. -
'Connection error' video example RTMP, used to work, now no longer works?
Hi all
I had together developer FMS 3.5 installed on my server installed a month ago. I used to be able to go to the /webroot/ page to see the video RTMP sample show and it worked very well. Today, I'm going to view this page and find that he's not playing. I get "connection error. Please preee play to try again. »
By pressing the play does nothing, so I click on the thumbnail RTMP and it recharges ony give me the same error again.
I can click on the thumbnail HTTP and see the video plays very well. But I want RTMP and after more than an hour on the phone with my tech managed hosting, we can't find anything wrong.
Here's the thing: I didn't do anything, I have not changed anything, I haven't handled the server software either. It has just stopped working and gives me "connection error".
I checked that the 1935 port was open, and it is.
UPDATE:
When I click on the thumbnail RTMP, once the "Connection error" message appears in the reader, the following things occur in my server logs:
"File does not exist: / folder/folder/folder/fcs.
"File does not exist: / folder/folder/folder/open.
The period of INVESTIGATION, it is my own.
The/file/directory/folder/corresponds to my public_http file and related files for the site, NOT the RTMP server structure. I have no idea why the F
MS seeks in my fcs public_http and open, but it is.Thoughts?
Help, please? Thanks in advance!
Sincerely,
wordman
Have you checked whether your FMS is running and what newspapers don't that you see these errors - core or edge or master?
-
Connection error internet Fireworks
I just reinstalled Macromedia Studio MX, in particular - Fireworks MX
When I click on the update on the update panel button, I get an error message 'Connection error', ' check your internet connection and try again. Well, I'm currently connected to the internet via ADSL, and I don't have connection problems to access this forum. I can't find any documentation on the resolution of this problem. Any ideas?snowlineguy;
It's been quite some time that I used fireworksmx because I
updated, but yes - it is my understanding of this Panel of response have been updated
order a long time ago...
-Tom Unger -
A connection error when I try to launch games for windows.
A connection error when I try to launch games for windows.
It is said... Connection error. Cannot start the program. There may be a problem with your Internet connection or the Live service.If you have problems with an Internet game, look at the following article.
KB 2528246 - troubleshoot games online using Internet Explorer
http://support.Microsoft.com/kb/2528246They have a lot of suggestions which may help your question.
Sincerely,
Marilyn
-
Try to run a 'error checking' and 'defragmentation' on my computer
Hello
My computer was slow, so I would like to run a 'error checking' and 'Defragmentation '.
When I try to run the "error checking" I get the following message: "the disk check cannot be performed because the disk check utility needs exclusive access to some Windows files on the disk. These files are accessible only by restarting windows. You want to schedule this disk check to occur the next time that you restart the computer? " I tried to restart Windows and check the disc again, but I still get the same message.
When I try to run a defrag, I get the following message: "Disk Defragmenter has detected that Chdsk is expected to run on the volume: HP_PAVILION (c)." Please run Chkdsk /f.' I've repeatedly said no to checkdisk start in the previous paragraph, but I always get these messages.
No information as to how I can solve this problem?
Thank you! Kara
Maybe you will need to follow the instructions more closely. If your repeatedly said 'NO', how it's supposed to run checkdisk?
Click to open the computer.
Right click on the hard drive you want to check, and then click Properties.
Click on the Tools tab, and then under error checking, clickCheck now.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
To automatically repair problems with files and folders that the scan detects, selectAutomatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.
To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.
To check for errors file and the physical errors, select both automatically fix file system errors andScan for and attempt recovery of bad sectors.
Click Start.
Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.
Note
If you select automatically fix errors of system file of a disk that is used (for example, thepartition as containsWindows), you will be asked to reschedule the disk check for the next time you restart your computer.
Maybe you are looking for
-
Told me that an external source trying to update firefox?
I close Firefox and a pop-up opens and says that Firefox blocked an unknown source to try to update.
-
T400s - good memory memory upgrade?
Hello I want to ask you for advice. I have T400s 2808-DEG with 4 GB of memory (2 * 2 GB). I would like to move from 32-bit to 64-bit win7 and that's why I want to improve my memory from 4 GB to 8 GB as well. Even if I found in the techniques here wha
-
Need to reinstall Vista, but the DvD player does not work
Alright. That is the problem. I installed windows 7 on my laptop because a virus crashed my windows vista and the lost disk. After installing windows 7 my dvd player wouldn't even appear or open. As there is no power going to it. Before installing 7
-
2960 will not allow "switchport trunk encapsulation dot1q" CLI
I have a Cisco 2960 switch that does not allow me to configure the switchport trunk encapsulation dot1q on a trunking interface. The features of the watch that the interface can use 802. 1 q, but when I try to CLI the command encapsulation of work is
-
Smartphones blackBerry browser configurations
Recently, I received my phone, when you download applications like the music store and others that I have to chose to do not to allow java scripts. now that I'm trying to listen to streaming or music store, I get only "java script not activated '.» I