What .dll contains the splash screen?

Similar Questions

• Satellite L640 hangs at the splash screen

  Hi all

  I have a L640 / 01 H that I bought earlier this year. In addition to the original Windows 7 OS, I installed a Linux system on a separate partition.

  Earlier today, I was using Linux (which is what I normally use) and everything was really slow.
  Finally I force-shut-down, power button.

  Now, I noticed a problem with the BIOS on this laptop - if I try to start when there is a USB flash drive is connected, the splash screen just hangs. Today when I rebooted I realized that I had left a flash drive, then I got out and I tried to start it again, a couple of times. Whenever the computer crashes just indefinitely on the startup splash screen.

  Finally I gave him enough time and it takes the selection of Linux boot menu, so I tried to start my usual kernel but he gave me some message about a bad MBR.
  I kept trying to start, but the boot process is stuck, what happens is as follows:

  * The three lights on the left (power, battery and light) come on, no problem
  * HARD drive flashes white for a few seconds, then turns off. Occasionally, it will blink again.
  * At the same time, the screen is just stuck on the startup splash screen. If I try to press f2, f12 or any key too many times it will start emitting beeps whenever I press it. There is no way to get into the BIOS settings.

  Also, I can't boot from CD (Windows recovery CD or Linux LiveCD). Finally some kind of time-out of the entry into force, and the computer restarts itself to start the process all. Yay!

  I tried the stuff "unplug the power cord, remove the battery, hold down the power button / stop, plug back in, try to start" but nothing has changed. I also tried switching memory locations (only one chip of RAM, so I can't try a process of elimination on the RAM).
  Finally, I also open the door to HARD disk and removed the HARD drive, then tried to start. This time the BIOS has answered, if only to tell me that there is no appropriate boot media. At this point, the BIOS was responsive and I could change settings in there, but I could not boot from the CD.

  I thought I'd try resetting the CMOS battery, but I'm worried I'll damage something / make the problem worse. Someone at - it ideas? I know that the thing is still under warranty, but service centres are often slow and I don't want to lose the data from the hard drive.

  Any help would be really appreciated.

  > Finally, I also open the door to HARD disk and removed the HARD drive, then tried to start. This time the BIOS has answered, if only to tell me that there is no appropriate boot media. At this point, the BIOS was responsive and I could change settings in there, but I could not boot from the CD.

  It could be a problem with the CD/DVD drive what you think of this idea?
  Perhaps the BIOS does not recognize the CD/DVD drive properly and so there is a problem starting the bootable disc.

  In addition, it might be possible that failures of HARD drive and, therefore, you received an error message about the MBR (master boot record).

  Remove the CD/DVD drive and try to install the Windows booting from a USB flash drive.

  _Regarding the battery CMOS: _
  I would not recommend to disassemble the laptop because you could damage other parts and in addition it should know that the CMOS battery is not removable it s soldered to the motherboard

• All of a sudden my Acer Iconia One 10 will not close or disable. It flashes just the splash screen

  All of a sudden my Acer Iconia One 10 will not close or disable. It flashes just the splash screen "Acer Explorer beyond the limits; Powered by Android.

  What should I do?

  Problem with the cord/charge plug unit... is very loose and since I bought it. It takes an extraordinary amount of time to load. Is it defective?

  According to the description of the connection of the power supply or you have a problem with the power outlet (perhaps folded ut of shape enough to cause free adjustment) or Charger (connection flashing in-house, exit misfeed or simply that bad). If I was in your position I would take back and get one without load problems. You can send it through Acer support and they will fix it for you, but back to the seller will be faster.

• How can I stop the "Splash Screen" to appear please.

  Hello
  I have two monitors, model S230HLbd. How can I stop the "Splash Screen" to appear please.

  By Splash Screen, I mean the 'Acer' and 'Energy Star' logos that appear when you turn on the screens. I think they slow down the display of what you want to see.

  There is no way to stop the boot process.

• size of the Splash screen image

  What should be the size of the image to the boot screen?

  I did mine in 1024 x 600 (full screen) because the charger of the splash screen does not Center it nor does support transparency.

• Is it possible to get rid of the splash screen, the screen of the app and go straight to the desktop?

  Original title: I h8 windows 8.

  I don't like having to go through two screens to start my computer and two screens to close.  Add the startup of the screen and the screen of the application tiles does improve performance, they interfere. I don't see what's the difference between have icons on my page tiles and the application windows on my screen, except that the former is more efficient.

  Is it possible to get rid of the splash screen, the screen of the app and go straight to the desktop?

  Easy solution for this. You can download the Start button after the installation your computer will work like all the other previous windows and ordinarysoft.com. You will have all the programs with your button/start menu 'start '. The installation start opt to escape metro and you never see it again. Tell me if you have any problem to find the button start or downloading from the link I told you. Its free of cost.

• How can I get rid of the splash screen in Flash Pro cs6

  I used flash in its early versions, but didn't have a reason to use it for many years. I installed it on my desktop and now find myself needing to use it for a small project. So I open the program, and of course, it is open to this really annoying splash screen. and it turns out that I can't find any way to leave this splash screen. My screen resolution is at 1024 X 768, and I can see easily all the splash screen. But what I don't see is somehow too leave this screen which is a real issue because it allows me to continue my project. I even chose one of the enumerated option; "Flash project", but still the splash screen does not disappear.

  How can I get rid of the splash screen & can I make disappear forever. ???

  When you open CS6 and that you can't get anywhere, you can always select Preferences. There, under general, you can select which shows when you open Flash Pro. Change the welcome move on screen.

• LR 6 starts but won't continue beyond the splash screen

  Found this suggestion on how to fix

  Lightroom does not launch or closes automatically after the splash screen

  But it did not work. Now when I run LR I get a message saying "contact Support Adobe and mention the error code display at the bottom of this screen."

  Error: 16

  Return to what you were doing and then manually disable the GPU: Adobe Lightroom GPU troubleshooting and FAQ

• How can I get the splash screen in the trial cs6

  How can I get the splash screen in the trial cs6

  Help--> see the tip of the day or similar... Depends on what program you use exactly...

  Mylenium

• Y at - it a print to print only what is on the computer screen?

  Y at - it a print to print only what is on the computer screen?

  Not directly. Take a screenshot and print the PNG resulting on the desktop.

  (141553)

• HP pavilion monitor go black after the splash screen

  When I start my pc, the splash screen appears on the monitor, but after that he's black. I can hit one of the f keys to take me to the start page or diagnosis, but when I change the path of startup and press on save, then enter it just go to the screen black I have also hit the f9 key to go to the diagnostics page and run the hp diagnostic tool edge who said past when I try to return to the screen black new go! at first I thought it was a graphics card problem so I replaced the former with a same something new, I also tried plugging three different locations on the graphics card, I started with the dvi connector with an adapter on my cable even not, it will display the start page, just go s strait to no signal , so I went on the VGA slot that has been, I can get to the start screen, finally I tried the hdmi port and again, I can get to the start screen, but then it GB Black I removed the ram and cleaned and was going to try to go to Detroit from the motherboard to the screen, but I got scared when I saw the black cap with the words DO NOT REMOVE this topic! I tried 2 different monitors just to eliminate this probability but now I am just confused ideas would be appreciated!

  Hi lostone64,

  The fact that you can see the splash screens makes me think that this isn't the video port or motherboard. My hunch is it could be a hard drive failure, operating system error, or problem of display settings. You never see a Windows screen until it goes black?

  Have you tested the hard drive or made sure it appears in the BIOS?

• SignalExpress closes immediately after the splash screen

  I'm having a problem with the Software NI SignalExpress where the application fails to open completely - it closes immediately after the splash screen. I am using windows XP Pro. SP3.

  I tried to uninstall, registry errors compensation and reinstall, I also tried the repair installation - or who work.

  A test of SignalExpress installation was installed on my PC until I got a full copy with the purchase of a data acquisition (usb-6218).

  Hi André,.

  Sounds a bit nasty. If repairing and reassembling and all this malarky does not recommend the use of msiblast to clean your computer of all the software of NOR and starting again with a new install. When you software uninnstall he didn't get rid of everything, there is still hidden folders around dootted.

  I joined msiblast.exe.

  -Run msiblast

  -Make sure the radio button "Show OR installers only" is selected.

  -Select all and then click on uninstall.

  When this is complete, your computer will be NOT free. After that;

  -Install all software from OR you for example LabVIEW Signal express

  -Then install the drivers. The USB-6218 case uses the DAQmx driver that the latest version can be downloaded from this link.

  If it persists then write again.

  Kind regards

• In any case to change the splash screen resolution?

  Hello

  I have a laptop wide screen (16:9) with a resolution of 1280 x 800. When I turn it on, the start screen (logo "Windows XP" and a loading bar) gets stretched and does not my screen resolution. Y at - it a fix for this?
  Kind regards
  Nathan

  Nope - the splash screen uses the lowest possible resolution so that it will show regardless of monitor, card used graphic, video system or TV.  This is basically the "infallible" mode

• How can I remove the notebook of the splash screen?

  notebook

  When I start my notebook computer appears. I can't do anything until I'm close Notepad. How can I remove the notebook of the splash screen?

  When I start my notebook computer appears. I can't do anything until I'm close Notepad. How can I remove the notebook of the splash screen?

  By Notepad, I assume you mean Notepad (i.e. notepad.exe) a text editor provided with all versions of Windows.

  Press Windows key + R ( Start, run) and type msconfig and then click OK. Look under the tab to Start for an entry which involves the notebook and/or a file ending with . TXT. Uncheck the entry, and then click OK in the lower right. Restart Windows shouldn't start Notepad then.

• How can I prevent the splash screen to disappear after a few seconds?

  I have a HP Touchsmart all in one by using Windows 7. The machine is brand new.

  Whenever I get the splash screen, if I am not for nothing, after that a few seconds, the screen turns off and then I can make it back by pressing any key and then click on my name from the entrance to ge the rear screen startup.

  Hello jimtiger: I'm not familiar with the Touchsmart version 4 software. It works with version 3 of Touchsmart. Left click mouse any where on the screen click on customize. The opening of new windows screen saver goto adjust the wait time for a longer period of time.  Can also change the settings of computer power. Control in the lower right panel, you will see tools and information on the performance up until it clicks. Top of next window right-click on the adjustment of the parameters of energy.  Check high performance box.  Who will now have a blue dot. Just beside it, you will see the settings of plan up until it clicks.  You will see the screen dims: click the box next to it. My is set to 10 minutes below. Turn off the display: click the box my is fixed to 15 minutes. Put the computer to sleep: click the box my is defined. Never. Brightness is right-wing. Under that, you will see the change, click on advance power settings. Everything has a greater mark in it. Click ok. Close all windows should be all set now.