What does 'E' on the screen of podcast?

Similar Questions

• Re: Satellite A135-S2276 - does not start, the screen is blank

  I have a Toshiba Satellite A135-S2276, I bought 2 years ago. It worked fine except the clock which has never kept the exact time since I bought it. I turned it off Sunday night as I do regularly. But he could not turn it on Monday afternoon. The power light is not on when you turn it on, but primer. The light remains on but does nothing. The screen is blank when feeding it works.

  Can someone help me with the answer? Thank you

  Dennis

  It's hard to say what is happening to your knees. You can access Bios? Try to connect the external monitor and see (maybe the screen of the laptop disappeared)...

• Games running in lower resolution on the desktop resolution does not fill the screen

  I have a laptop HP ENVY 17 TS with NVIDIA GT 740 M and Intel 4600HD graphics drivers and running Windows 7. Whenever I want to change the resolution in games at a lower resolution on the desktop resolution, the game shrinks to its view, leaving the couple of inches black bars on the edges. For example, if my the desktop resolution is 1920 x 1080 and I want to start a game in 1600 x 900, the game does not fill the screen, instead, it leaves an amount of empty space on the edges of the screen.
  
  In order to solve this problem, I tried the following steps:
  
  I first tried to locate the view tab in the NVIDIA Control Panel in order to define the scale/stretch in "Full screen", but my version of NVIDIA CP isn't the view tab (my NVIDIA drivers are the latest version).
  
  Then I discovered that I should do this in the Intel HD Graphics Control Panel. My Intel HD Graphics CP has an option named "Calibration" under display > display settings and it doesn't show the option to retain display scaling that is checked by default and does not change. Also, after searching the Internet I saw that some people suggested entering the 'advanced settings' and try to make changes. When I try to enter advanced settings, under view, it says 'this screen does not support advanced settings'.
  
  After trying without success, I tried the update driver Intel via their website, hoping that it can fix the problem. I ran the small Intel application on their Web site that identifies my chipset and offers me the latest driver for this chipset. Web site told me that the driver is installed on my computer is 10.18.10.3304, and there is an update for what is 15.33.18.64.3496 (or 10.18.10.3496). So I downloaded the file, but when I tried to run, it gave me this error message: "the drivre being installed is not validated for this computer. You can get the correct driver from the manufacturer of the computer. Setup will now exit. "that makes no sense.
  
  After trying the above steps, I'm not able to solve the problem, and I need help from someone who really knows how to solve this problem.
  
  Thank you.

  Solution (I hope)

  1. choose the properties of the graphic (logo Intel) option when you right click on the desktop

  2. go in view

  3. go through the resolutions on the 'Resolution' and change to this resolution (do not click Apply)

  4. for everyone to go to 'Scaling' at the bottom of the screen and change it to scale full screen (do not click Apply)

  5. Repeat until you get back to the higher resolution (that won't let you change the scale).

  6. quickly choose a few resolutions from the drop-down menu to make sure that they have changed their scale.

  I had a problem with some resoultions changing the way they were, but which should solve most of the problems.

• my information does not match the screen. I have to scroll sideways and vertically for all to see

  my information does not match the screen.  I have to scroll sideways and vertically for all to see

  How can I change the size if it is adapted to the screen?

  Hi Marilyndunn,

  ·         are what application you referring?

  ·         It occurs on all applications?

  ·         If it works well before?

  ·         Did you do changes on the computer before the show?

  You can see the following article for more information about the display settings.

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-the-best-display-on-your-monitor

   

  Make the computer easier to see (optimize visual display)

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-the-computer-easier-to-see-optimize-visual-display

  Hope this information helps.

• When a tab is opened, it does not overlap the screen im on.

  So when I like to open another tab when I click a button, it does not overlap the screen, I'm on and if I click it, nothing happens, so I have to minimize and press tab to open it and when I click on the tab I am the last, it works fine but the other tab is not.

  It seems that your browser runs slowly due to lack of memory (why a new loading tab so seems to freeze and can be thawed by minimize and maximize). This explains also why you can change to the previous tab, but not others; the last tab you used is still in main memory, while the other tabs should return loaded into main memory when you change their (as other data takes the place of the main memory).

  So I suggest you try to restart Firefox (as some may have memory leaks) and closing other applications you have open (use the Task Manager to help if they are slow to respond). If you're still having problems, try closing using the tabs/windows less.

  If you still have the problem, then you should try reinstalling Firefox (see uninstallation and installation).

• I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

  I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

  The 'Print screen' button is misnamed.  In fact, what happens when you press it, it is that an image of the screen is copied to the Clipboard.  You must then open an application that can work with images (paint works) and paste in the opened window (or right-click > paste or edit > paste).  Then you can use the regular print of this application (for example, the file > print).

  You can also download free IrfanView.  It is a very handy utility.  It allows you to open and view a wide variety of image file formats and also has the capability of the bulk renaming of files and - for your current number - capture screen images and prints them out.

• Can not send what I have on the screen, since I went to Qwest MSN

  I went from MSN to Quest (century link now), and everytime I want to send something to someone my previous MSN windows open and tells me that my account is closed and to go to help and mention the 35 error. I can't send you what I have on the screen.

  Hello SARATAYLOR,

  This thread has been created in the Windows Vista files, records and research forum. the Microsoft moderation team has moved this thread to networking, line and Forum Email.

• Flattening, save money, levels: a very different output than what I see on the screen

  Photoshop wizards! I'm stumped on this problem and it's driving me bananas! It's a simple photoshop file, thus creating a background star field using noise and great basic tools. However, when I try somehow to save or flatten the image, the results look different way from what I see on the screen! This problem just started today and I don't know why, and nothing I've tried has fixed it. I am literally unable to create anything because whenever I try to save, I get a very different picture.

  
  In this screenshot, I use the save for web window to show what is happening, but it's the same, if I Flatten all layers, merged copy or try to save it as that - of course the results are not what my original document shows. It's like levels and layers are completely ignored. The same thing also happens when I try to apply levels to any similar image, it seems to go in the preview, and then totally different after the application.
  

  There is no transparency, layer styles or something tricky going. The document has the color management and RGB 8-bit/channel, test colors is disabled. I restarted my computer restarted the document from scratch twice, reset my preferences, off hardware acceleration, updated for the last CC 2015.5 and have been Googling for the last hour... no luck.
  I forget something really stupid, or I don't know what. I remember running on this problem before with my old laptop, but I do not remember what was the solution if I ever found a. If anyone wants to check out the document, it will be temporarily here:

  https://DL.dropboxusercontent.com/u/9988355/StarField2.PSD.zip
  Stats: Mac OS X MacBook Pro 10.11.4, (2015)
  Appreciate any help!

  Glimpses of adjustment are calculated on the basis of the ratio of the screen zoom. This is done for performance reasons.

  In other words: If you view at 50%, the preview adjustment is calculated from this version sous-échantillonnées. Now look at this reduction of scale means causing the pixel details - it becomes blurry and fuzzy. So now you get a series of intermediate values that do not exist in the original, and you see adjusted values that do not exist. I can give you a false idea. But when you post adjustment (Flattening), the complete original data are used.

  Always keep in mind that the beach tonal adjustments have no effect on each of the pixels that are pure black or pure white. They only work on the medium gray.

  This consideration applies to all images with high acutance (sharp pixel-level transitions). It is not normally a problem for a normal picture with smooth transitions.

• What does clicking on the ad box?

  What does clicking on the ad box?

  In the Folio of Builder Panel? See http://helpx.adobe.com/digital-publishing-suite/help/create-articles.html#change_article_p properties

  Neil

• I can do a vertical photo which does not meet the screen

  Is it possible to blur the edges or the bottom when you have a vertical photo that does not cover the full screen? I need suggestions on what to do, so do not always see the black screen. I know that I can put a background behind it, but according to me, the edges of the image are so distinct in this way.

  What seems to have become the default behavior, at least on American television, when it is necessary to introduce video portrait of the TV, is put the image under the vertical of the image, it fits the bottom until it fills the screen and maybe more, then a little blur to hide the pixellation, and finally to darken it, based on the original content.

• Satellite A60-122 - does boot and the screen has lines on it

  Hello!

  I have a Toshiba A60-122 PSA60E model. Pentium 4 HT. 1 GB of memory, 80 GB hard drive. BIOS 1.7.

  The problem is that it hangs on until the Windows XP logo appears, then the choice of Windows is displayed, I try safe mode, but does not work either.
  And then decided to have a specific format but still the same problem, and even the recovery CD does not either.
  I noticed that the screen has lines on the subject. Toshiba Logo appear when booting, you can see the columns of the row.

  Can someone help with my problem? Any idea?
  And by the way, I want to update my bios to 1.9, but the problem is that I can't find the traditional BIOS update on initialize to top.

  Thank you.

  Do you have these lines of the screen on an external monitor too or only on the screen LCD internal?
  It sounds like a hardware problem, but if you can determine if it s a LCD or motherboard problem. Check it!

  And by the way, what do you mean if you say that it doesn't work? You can see something on the screen and you get a BSOD?

  Maybe the problem is with the motherboard or HARD drive. You can test the HARD drive by using the Drive Fitness Test (Google is your friend).

• Spectrum X 360: New spectrum X 360 does not turn the screen into tablet mode

  My spectrum is only two weeks old and works wonderfully as a standard notebook computer.

  However, I cannot get screen to turn when I select tablet mode or Flip on the stand of entertainment.

  All the research online, I can find are people who used Win 8.1 and is updated to Win 10.

  Mine came with Win 10 pre-installed.

  None of the screens settings they advise to go to exist.

  I also checked the registry and its game properly.

  Windows 10 made the anniversary update a few days in me starts to use it so I don't know WHETHER or not the rotation number was there from the beginning.

  I solved my problem re. the screen does not turn in tablet mode.

  Yesterday, I installed HP Support Assistant in the hope, he suggests a solution.

  It didn't at the time, but it made me on this forum where I see that many others had similar problems.

  Today, when I turned on my laptop I noticed that support Assistant has a list of available updates.

  the first who has updated automatically has been updated for HP Notebook System Bios (Intel processors) which, after installation and reboot I had not really noticed any difference.

  Among the list of updates has been 'Intel Integrated Sensor Solution Drivers'

  Because I couldn't find any menition of sensors in my device manager, I installed it.

  Now I have the "Lock Rotation of this view" option may be greyed out there but at least now it.

  Still no spin so I started to double check every thing once again and found that I had a new entry in the registry... Sensor

  present.

  However Enable is set to 0 instead of 1

  

  I changed the 0 to 1 and here I rotation.

  However the only question now is the Rotation options buttons are greyed out, but I still can auto rotate when I flip to the tent, entatainment or tablet mode.

  At least, that my X 360 so that its name and what I bought it for.

  Fact my research I love the lack of rotation is not a specific HP problem but a problem of Windows 10.

  If other problems persist, try to reduce your search settings to fail to win 10 to rotaate, you will see a lot more information out there.

  Thanks to everyone who tried to help me. I hope that my message will help someone else.

• HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

  Hello!

  I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

  (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

  Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

  When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

  Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

  It will take a little while for the circuit drain the load on my battery but...

  Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

  Hello @GregPDesWHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not on, and I'd be happy to help you in this case!

  In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• Program BACK in Guest XP on Windows 7 does not fill the screen

  Hello world

  I have a quite unique due to many circumstances situation and several months of research to get to a decent workaround.

  I have a tool written in Basic for MS-DOS. I need to use this tool and the interface with the files created in Windows 7. VMWare Player with no very good support for sharing files between DOS with Windows 7 clients, I have opted for a guest of Windows XP on my computer Windows 7 host and who go through the program. In this way, I can share files between XP and 7 and run the program correctly in the XP VM. Note that this program doesn't work at all on Windows 7 due to some problems graphics driver, hence the need for such a solution.

  When I run the XP VM, it is able to match the resolution as expected. However, when I open the program BACK, he is not full screen as it does on a native XP machine or even a VM XP in VMWare Fusion on a Mac. Is there a way to force it to fill the screen? The graphics full screen are vital for visibility - I can barely see anything on the screen of dinky little 640 x 480 without blowing up to its maximum potential.

  I tried several other options, including a Windows VM (I'm under Windows 7 Enterprise) and DOSBOX. Windows VM has the same problem resolution in addition to requiring the integration of features enabled to share files and requiring the same integration disabled features in order to run the program and the DOSBOX not full screen but the performance is much too slow to be practical (it is similar to take 2 minutes to scroll through a web page that is several pages a notch long) even at maximum settings.

  Please no suggestions ' do you have the printer "-I am part of a team of average size on how it works and it's pretty much the last roadblock after several months of work. We probably tried everything which is immediately obvious, including the recompilation of the source code for the program BACK (that we had to do anyway to remove a lock imposed by a society that no longer exists).

  The closest that I have is to reduce the resolution of the host Windows 7 in 800 x 600, which makes the VM a bit larger but still not quite full screen. I try to activate the VGA 640 x 480 mode, I guess? Even in this case, however, the need for constantly changing screen resolutions makes this solution less than ideal.

  Thank you for all the suggestions/help.

  Do I understand correctly:

  -It is an application with a fixed resolution of 640 x 480 fullscreen

  -You want that he developed the scale to fit to your screen

  As far as I KNOW, VMware Player is not just what to do.

  There is a tutorial in the section documents for a workaround (using the changer display to automatically change the resolution of the host).

• Firefox loads, icon on the bar of tasks but when you click the slide of graphics off to the right, but does not fill the screen & when you right-click again, falls back into the icon

  Firefox, Thunderbird and Quicken were active when I loadad & ran a slot machine game. When I left the game & click on icon to return to Firefox full screen, I could see the flash of the image to the right of my screen and disappear. When I clicked on the icon in the taskbar, the reverse happened - the image flashed from the right down to the icon. When I hover the mouse over the icon, the open screens appear with the red X to close, but the same thing happens when I click on this box. Two other programs that have been opened, while the game was active work correctly, only Firefox has been affected. I can't open the program to access one of the menu items that I can't get the image of the screen on the monitor. I did uninstall and reinstall a freshly downloaded copy, I had to use IE, as I am now) but with the same results when I run. I did chose to save my settings, so if something has changed here so maybe that's the problem.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.