What does this statement?

Similar Questions

• 62/4MEM/40000000: 0X84321b98 what does this error message mean?

  62/4MEM/40000000: 0X84321b98 what does this error message mean?

  It of a memory error, what are you are having problems.

• My wife has an i5 to 2.3 GHz MacBook Pro early 2011 and it worked like a slug.  Ran disk utility and verified that the disk needs repair using recovery HD.  What does this lead and what is the risk of losing all the data is there?

  My wife has an i5 to 2.3 GHz MacBook Pro early 2011 and it worked like a slug.  Ran disk utility and verified that the disk needs repair using recovery HD.  What does this lead and what is the risk of losing all the data is there?

  Even if it is very slow, you must make a return upwards before the race "repair disk". The risk of data loss is minimal, but do it anyway: Save and run to repair the disk.

  As for what it implies - most of the time nothing more than simply sitting and waiting to do his thing.

• Your version of Intel Active Management Technology is not compatible with this version of Windows. What does this mean?

  my pc is hp compaq dc 7800 small form factor.

  I installed win vista Business 64-bit

  After installition, I get this message

  "Your version of Intel Active Management Technology is not compatible with this version of Windows."

  What does this mean?

  Thank you

  Hello

  I suggest you send the question in this forum and check if it helps;

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup

  It will be useful.

• Windows Defender does not turn and I can't access it. I get the error Code is 0x800106ba. What does this error code mean?

  I can't turn on Windows Defender, nor can I open it upwards. The error code that is displayed is 0x8800106ba. What does this code mean?

  Hi, tonytiger34.

  The usual solution to this error is to make sure that the service is automatic. Oferror message when you run Windows Defender: 'Error 0x800106ba Code' :

  "To resolve this issue, follow these steps:

  1. Set the Windows Defender service on Automatic rather than Manual or disabled . To do this, follow these steps:
     1. Click Start
        The collapse of this image enlarge this image

        

        type services in the Start Search box, and then clickServices in the programs list.

        The collapse of this image enlarge this image

        

        If you are prompted for an administrator password or for confirmation, type your password or clickcontinue .

     2. Double-click the Windows Defender service and then in the Startup type box, clickAutomatic .
     3. Click OK . »

  If the automatic commissioning does not resolve the problem, try reinstalling Windows Defender.  Note, however, if you have installed Microsoft Security Essentials, Windows Defender disabled installation because MSE includes anti-spyware protection.

  Additional steps are available in the article referenced in the Knowledge Base.  Please let us know how make you out.

  Corrine, Microsoft MVP (consumer security)
  My Blog: Security garden

  This announcement is in my opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS and is provided without warranty and not an entitlement.

• error code: 214750037 what does this mean and how do I? in the game adera

  I was downloading DLC to adera and it downloads fine, but when it installs it said error of mapping content an unexpected error occurred during content acquisition. Please refer to the error code: 214750037 what does this mean and how do I?

  I have the same problem with the second episode of the Adera. No change to my Surface either I have no antivirus running on this unit I just got this Friday.

• SHARED-UNKNOWN-ERROR: 22-What does this mean? can not post the site that this error when I try.

  SHARED-UNKNOWN-ERROR: 22-What does this mean? can not post the site that this error when I try.

  Hello

  Please sign of Muse and identify yourself again and try to publish.

  You have the option of disconnecting help > Sign Out

  In the case that do not fix the issue made me know.

  Concerning

  Vivek

• What does this message and how I can fix? "There is no disk in the drive. Please insert

  What does this message and how I can fix? Thank you.

  "There is no disk in the drive. Please insert the floppy into \Device\Harddisk2\Dr2.

  Hiking Abes

  Important information... what version of Premiere Elements you are using and on what computer operating system is running.

  If your question is really tied to SmartSound installation, then...

  It considerations important installation first elements 11 Smartsound

  http://helpx.Adobe.com/premiere-elements/KB/installing-SmartSound.html

  It when you enter the program

  http://www.SmartSound.com/support/link.php?ID=308

  I do not see these links included in John T. Smith link towards a solution, so I am supplementing with the foregoing.

  Please let us know the result.

  RTA

• What does this code on my 2012 MBAir: 4BAT/6 / 40000005:ox898F7790

  MBAir i7 end 2012 does not work out of the battery. Instantly died. Works with power cord only. Battery shows fully charged. The battery shows as good. 5979 mAh 6700.

  A ran the test phase and got this code: 4BAT/6 / 40000005:ox898F7790

  What does that mean? A new battery will solve the problem?

  Or it means something else?

  Thank you

  This error code indicates a problem with the battery.  Your best option is to make an appointment at an Apple store genius bar for a FREE evaluation.  They should be able to determine if the MBA requires a new battery or if there is a problem with the internal connection.

  Ciao.

  Addendum: Try a SMC reset:

  https://support.Apple.com/en-us/HT201295

• Just a simple question, what does this number Red?

  Premise: my LAN works fine, no problem between my airports.

  The point is: what does the Red number next my average of Lan components?

  Thanks to you all.

  Marco M.

  This means in this case that there is an update for your wireless devices.

  Click on the device and the connection if necessary. It should say updated to do this, click this button to update.

  See this Apple info:

  https://support.Apple.com/downloads/

• What does this query? Am I wrong?

  Select AVG (NTC)

  de)

  Select DriverID, cast (COUNT (9) as float) cnt

  of myTEST2 one

  where exists (select 1 from myTEST2

  where DriverID = a.DriverID

  and layout = "guilty".

  )

  DriverID group

  ) x

  I think that his calculation of the average number of people with the provision of a culprit.

  Hello

  If a subquery in a WHERE clause clause refers to a value of the Super-requete, then the subquery is called a correlated subquery, and it runs a separate period for each line of the great query of.  This is the query you posted, reformatted to make it more understandable:

  Select AVG (NTC)

  de)

  Select DriverID

  , NTC cast (COUNT (9) as float)

  of myTEST2 - Alias defined here

  where is (-beginning of correlated subquery)

  Select 1

  of myTEST2

  where DriverID = a.DriverID - Alias a used here

  and layout = "guilty".

  ) - End of subquery to correlated

  DriverID group

  ) x

  ;

  The average subquery (i.e. the query with the GROUP BY clause) has a WHERE clause, so every time a line is located in the table mytest2, that where clause gets evaluated and the results of this condtion say whether the line should be included or not.  Oracle has found a line with driverid = 1 in the table mytest2 and then decides if it will use this line.  What does exactly to decide?  He runs the EXISTS subquery and sees if the subquery produces all lines or not.  When it ends with the line that is driverid = 1, there may be a lines with driverid = 2, rerun the query EXISTS Tahina, see if the subquery produces all lines and use it to decide if the line is stored.  The computer could pick the other row with driverid = 2 and repeat the process.

  Using a table alias told Oracle that the subquery EXISTS is a correlated subquery and it also says there that the values of the Super-requete to use.  Therefore, in the scenario I described earlier, when the Super-requete is to decide whether to keep the line with driverid = 1, it executes the equivalent of this EXISTS subquery:

  Select 1

  of myTEST2

  where DriverID = 1 - because a.DriverID = 1

  and layout = "guilty".

  Then, when he is to decide whether to include one of the lines with driverid = 2, it executes the equivalent of

  Select 1

  of myTEST2

  where DriverID = 2 - because a.DriverID = 2

  and layout = "guilty".

  There is nothing magical about the alias one.  This is an identifier arbitrariness that is defined in the Super-requete of and can be used in the subquery.  You need some type of alias in this case because the EXISTS subquery can be based on the exact same table that its users of subquery, which is mytest2.  Using your 2 copies of the same table, similar to the way you have 2 copies of the same book, open on different pages.  If you do not have an alias, no column name could make reference to the copy of mytest2 in the subquery EXISTS, or to the copy used in the Super request and by default is that it means the copy in the subquery.

• WRCConsumerService has stopped working. What does this messsage?

  WRCConsumerService has stopped working and was closed

  A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  Whenever I close the message and continue to use the computer, it works fine but when I stop and restart the message reappears. This is the message of any concern? I have not been notified by Windows on one topic other than the above message. How can I prevent the reappearance of this message?

  Hello

  1. Once you get this error code or error message?

  2. this issue occurs during the use of any particular application/program?

  3. have you made changes on the computer before this problem?

  4. you have any WebRoot program?

  The process WRConsumerService belongs to the software Spy Sweeper or Webroot AntiVirus with or Webroot Internet Security or Webroot AntiVirus with Spy or Webroot Software or Spy Sweeper for MSN or Core of Spy Sweeper from Webroot Software (www.webroot.com). I would suggest trying the following methods and check if it helps.

  Method 1:

  If you use one of the products associated with Webroot software, try to uninstall and check if it works.

  Uninstall or change a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Method 2:

  Step 1: Start in safe mode and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not persist in Mode safe then ths issue may be with any third-party application/program. Try to place the computer in a clean boot state in order to determine what application is causing the problem.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Hope the information is useful.

• What does this start screen?

  13 "MacBook Air, purchased in November 2015.

  No previous question. Computer has been turned off, I've been carefully (or not) wipe the keyboard accidentally pressed the power button and goodness knows what that other keys. Computer does its usual power sound, then THIS screen came. I don't know what to do with it.

  

  Really, I would like to return to my usual startup/login screen. Can I just turn off again?

  I'm stupid on the functioning of computers... this form scares me. Help!

  Thank you.

  (I've updated El Capitan, but I don't know if I have the latest update).

  It's just the Manager start screen. If you hold down the Option key (⌥) at startup you get this screen where you can choose which drive start. You only have one option specified.

  How to choose a boot on your Mac - Apple Support drive

  It is enough to select Macintosh HD and continue and it will start normally.

• What does this mean and how to fix: the router address you entered is not compatible with your WAN IP address.

  I connect to an access provider via Airport Extreme, which is extended through two Airport Express.  When I try to edit anything in one of these devices, even a name, I get this message: "you have entered the address of the router is not compatible with your WAN IP address.  My connection seems to work, but there is clearly something wrong with her.  The Express has no DNS and will not update without the same message.  I have no idea what this is all about and will greatly appreciate the ideas.

  This means that WAN Setup does not or does not install across the network.

  The best way to solve this problem is beginning on...

  Reset all three at the factory and reconfigure each in turn. Do the extreme first and make sure it works... Then add the express.

  If you need help with that we will need to know which modem or modem router to your ISP gave you and possibly the type of services to wide band... and who is the provider.

  Give us screenshots of each installer as you do.

• What does this button do?

  I just noticed this today (yes I know true practitioners, right?)

  What is doing?

  

  

  Synchronization between instances. For example, you have VI used in both projects, then open each instance and modify one of she (deuxieme will be broken). Then you get this button. When you press on, then VI will be updated for all instances.

  Andrey.