What driver to use for a HP 8563 A Spectrum Analyzer and a Giga - tronics 12000 has
What driver to use for a spectrum analyzer HP 8563 and a Giga-tronics 12000 microwave synth... these two are not in the driver list can someon help
Since there is no drivers, you can create your own, request one, use the Instrument i/o Assistant, or hope that someone has one and he posts here. On the creation of a help or to ask one, see the main page of the Instrument Driver Network . As long as you're familiar with the instrument and the manual, creating a driver is not so difficult.
Tags: NI Software
Similar Questions
-
Labview driver Giga-tronics 12000 has
Driver giga-tronics 12000a labview someone knows where I could find this driver thank you
-
Should what format I use for my external drive for time machine? I have a WD 2 TB that is formatted for PC new drive. When I got to disk utilities to erase, and then reformat the options are
1 mac OS extended (journaled)
2 mac OS extended (journaled, encrypted)
3 mac OS Extended (respect for case-sensitive, journaled)
4 mac OS extended (case-sensitive, journaled, encrypted)
See the information below If you can not back up or restore your Mac with the help of Time Machine - Apple Support
When you select a drive to use with Time Machine, your Mac automatically prompts you if you need to reformat the drive.
- If you are using an external drive connected to your Mac, use disk utility to make sure that your backup disk is formatted in HFS + extended (journaled) and is the partition type GUID Partition Table (GPT).
- If you use a time Capsule, formatting the drive for Time Machine preferences automatically formats the drive as HFS + Extended (respect for case-sensitive, journaled) with a GUID Partition Table (GPT).
-
What vmnic driver to use for the spine of 10g
Hi any recommendation on what vmnic driver to use for the virtual machine if I have a spine of 10g? I use Vcentre 4.1 U2
Hello.
This will depend on the guest OS, but if you just want pure performance then VMXNET 3 would be the one to try. Also check out the kb VMware "choose one network adapter for your virtual machine.
Good luck!
-
What should I use for a replacement of WinMail in Windows.
What should I use for a replacement from WinMail in Windows 7 when requires it a number of sites to meet an address or a link that the site offers an answer or a question. I have msn, yahoo & gmail but lost WinMail when I've upgraded from Vista to Windows7.
I lost WinMail thur a mistake some time & it was a nighmare tring to meet links on sites that requires to open a format Outlook, Outlook Express or WinMail.I have msn (hotmail), yaho & gmail, but none of them will come when I'm trying to respond to the link sites for a response. If one of those that should be used, how it equal in Windows7?
Windows Update has nothing to do with the upgrade of Windows.
Unlike Windows XP & Vista, Win7 does not have a default email Client. [What were thinking?]
You will need to install a (e.g. MS Outlook;) Windows Live Mail; Oiseau-tonnerre) , and then set it as a default for mail in CUSTOM (<>) Set Program Access and defaults of the computer before any function article send to or MailTo will become available.
You will find support for Win7 e-mail Clients in this forum: http://social.answers.microsoft.com/Forums/en-US/w7network/threads
Support for Windows Live Mail (which will be able to import your data from Windows Mail Backup), you will find in this public newsgroup:
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.live.mail.desktopThrough your News Reader:
News://msnews.Microsoft.com/Microsoft.public.Windows.live.mail.desktop~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I want to know what mircosoft to use for education online
I want to know what mircosoft to use for education online
If you plan to go to school, I would contact the school to see what their or are the requirements of instructors.
J W Stuart: http://www.pagestart.com
-
Hey all,.
I was wondering once more what metrics to use for memory capacity planning. Since the information from different sources (for example your ESXi host needs more RAM to Iwan Rahabok or VMworld 2012: Session VSP1729 - virtualized memory understanding performance management - Eric Sloof - NTPRO.NL Kit Colbert) pointing all assets (vROPS request), I expect that when we have high memory consumption / use in vCenter there will be no balloon / compression / permutation.
Also the metric active / request should not be used for all workloads (e.g. Java / DB), why is - this? I have not found the reason of this anywhere, only the fact.
Other sources such as Understanding Active Memory - VMware vSphere Blog - Articles VMware vSphere ).
suggests using consumed/use, which is the opposite (So I thought I'll with active / demand as metric and ignoring the warnings inside of vCenter.
But the last time we have fixed half of our group, we had consumed/high memory usage and the vCenter began to inflate, compress, and finally to Exchange. Not a lot but I had not expected that, because memory active was only a small percentage of consumed.
Can someone explain to me why this happened and who is right on this issue.
Kind regards
jengl
jengl I don't know if you asked the wrong question, or I give the wrong answer :-)
It is always good to attach screenshots, background to the issues, and what exactly you are trying to solve.
You wrote:
So to summarize:
-ESXi uses consume to decide when to start the recovery techniques of memory RAM
-To rightsize VMs for RAM, you must use the counter inside the BONE, not active
-If you do not want to commit too much RAM and have a lot of the balloon you should right-size your virtual machines or extend the RAM / buy additional servers
Please correct me if I'm wrong.
My answer: you are right. If you do not have access to the guest operating system, then Active VM and VM consumed are better guess. Better than nothing :-)
Sizing sizing of VM and ESXi are 2 different things (2 use cases) different. Please don't mix up the as soon as they are confusing. Do not try to resize the virtual machine when you are sizing the ESXi, unless you have a control total on them.
You wrote:
The question for me is: how many cache (standby under Windows) inside the VM is really necessary for the virtual machine to get the best performance without wasting resources. Perhaps this issue can be resolved only by tests or do you know another option?
My answer: it's a different topic brother :-) It is different, because it is within a guest operating system (Windows in this case) and is no longer at the level of the ESXi. Suggest that post you another, possibly under Windows or vSphere too :-)
-
What Oracle network uses for CAR traffic? where you get the Info?
Hello
I use two-node RAC on Oracle 10 g R2 (10.2.0.3.0) version on SUN Solaris 10. I want to know "what Oracle network uses for CAR traffic? where you'll Info»
-KumarHi Kumar,
In 10g, you can query x$ ksxpia. If the cluster_interconnect is stored in the OCR (by default), you will get
SQL > select INST_ID select, PUB_KSXPIA, PICKED_KSXPIA, NAME_KSXPIA, IP_KSXPIA, x$ ksxpia;
If you have specified the cluster_interconnects parameter in your init.ora:
Columns to look in: INST_ID select PICK NAME_KSXPIA IP_KSXPIA P
And also you can use 'CPI oradebug' to see who connects the database uses:
SQL > setmypid oradebug
SQL > oradebug CPIIt could be that useful...
Thank you
LaserSoft -
What Controlfile to use for DBPITR?
OK, here's the scenario, I have faced and want an idea. Thank you!
It is Monday morning (26/10/2009) and I had a request to do a DBPITR to Saturday (24/10/2009) at 17:00. I've restored the full backup as well as the controlfile to 24/10/09 at 02:00 (which has a full backup for weekday from 23/10/09) and the newspapers and the controlfile for backup of 25/10/09 at 02:00 (a ball for Saturday). Should what controlfile I use for the restoration of RMAN (24 or 25)?
I used the controlfile to backup 10/24 (issued [until time ' to_date (24 October 2009 17:00 "," mm/dd/yyyy hh24:mi:ss') ' ;]) and completed.]) Then I "restore archivelog all" and he read all the archivelog for 24, but does not seem to read a log file I have for 25, that data available for the 24. Should I have used the controlfile to 25 or y at - there a way to tell RMAN to search for the file that was not part of the backup set? Thank you.You need to restore a controlfile to before the PIT, then restore the archivelogs until the PIT, catalog them and recover.
To restore the archivelogs either controlfile another who does not know the backup archivelog or a rman catalog. STANDS of restorations are easier with a rman catalog.
-
I'm a composer of musicals for children and do a site for my work, but am a perfect beginner in Web design! Sound application what would you recommend for playback of tracks of my musicals and how to install it?
There is no "request" in itself, and according to which browser and the device is used, this could end by into a mess of different options of incorporation. So to save your sanity upload your files to a service like Soundcloud and use their built-in widgets and code.
Mylenium
-
Where can I download a LabVIEW GPIB driver for an ANDO AQ6315E optical spectrum analyzer?
Where can I download a LabVIEW GPIB driver for an ANDO AQ6315E optical spectrum analyzer?
Thank you.
The Instrument Driver Network has all the drivers for the instruments. There is no driver specific to this model, but there is one for the 6310 B. Maybe this can work for you. You may need to change. If this isn't the case, you will need to write one yourself. You can get a lot of material for this here: http://www.ni.com/devzone/idnet/development.htm
-
Should what format I use for my external hard drive?
I have an external drive that I wish I could use (writing) from my Mac and my PC, but without the limitations of + 4 GB files.
Is this possible or am I pasted with limiting the size? If so should what format I use on my external hard drive? and it has all the other notes aside I should know?
Thank you!
Hi Filabaca:
If you want to use a hard drive external Mac and PC options are:
1. format the drive in Mac as exFat
2. format the drive to NTFS on a Windows PC and use a program like Paragon NTFS for Mac. https://www.Paragon-Software.com/home/NTFS-Mac/
Paragon NTFS for Mac allows you to use a disc formatted in NTFS by a Windows PC.
Here is an article showing the difference between FAT32, exFAT and NTFS. http://www.howtogeek.com/235596/whats-the-difference-between-fat32-exfat-and-ntf s /
Kim
-
What HARD drive I use for Satellite L305D-s5868?
I need to replace the drive hard on my * Satellite L305d-s5868 *.
What is the form factor for a replacement disk?
* (Width, Height, Length) *.Can a * SATA II drive * be used?
TIA
I agree with Akuma. You need a HARD drive 2.5 SATA.
The SATA controller is compatible downwards, which means you can use a HARD SATA II in SATA drive I have controller.Cheers mate
-
SBS 2011 ceased to recognize drives external, used for the backup of the shadow
I have two external drives used for backup on a SBS 2011 server. The other one is a WD drive a Seagate. Shadow copy not now don't recognize either drive. Both drives worked on the server for about 9 months and are not anywhere near full capacity. The server is now saying that it can't find the drivers for external drives, he previously used the last 12 months. Both drives have been tested, are recognized and work correctly in any windows 7 computer. Is there a way the GET the server again recognized the readers?
Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:
Hope the helps of information.
-
Should which driver I use for Windows XP on Portege R500 by WLan
Because I couldn't get the wireless Lan driver, Intel, 11.1.0.100 references driver Toshiba download site (I'm redirected to a link that does not work), I went on the site: http://aps2.toshiba-tro.de/wlan/. Information about the two sites, all two of Toshiba, are contradictory:
A site lists 11.1.0.100 references as driver for Windows XP, the other site of the 11.1.0.100 references as the driver for Vista 64 and the 11.1.1.16 as driver for Windows XP. Which should I use for Windows XP on Portege R500?
Sorry my friend but after reading your question, I can just laugh. Use simply listed http://aps2.toshiba-tro.de/wlan/?page=downloads driver, install it and enjoy your life.
Maybe you are looking for
-
Hello I have a 27 "iMac late 2015, retina - 5 k, bought a few months ago and El Capitan (OS X 10.11.5) running I recently bought a 10 Windows in order to create a dual boot. Of course, as I write here, it did not work. I tried everything I could. Fir
-
Pop - ups taking on browser - nothing gets rid of them
I continue to have some pop-up windows that take completely Firefox - I'm not having similar problems with Safari or Internet Explorer. I ran Norton and SuperAntiSpyware, MalwareBytes, TDSS Killer without success. This issue is really makes it diffic
-
Is firefox beta 15.0b6 a true liberation? After 2 days, I still haven't seen on the page of beta version of firefox, so I don't let the update happens.
-
HP Pavilion a6110n: NVIDIA rejected updates
This box has started with Windows Vista Home Premium and has recently been upgraded to Windows 7 Home Premium. The installation was relatively smoothly and I was pleasantly surprised when I was told that he is qualified for the upgrade of Windows 10.
-
MacBook loses the Internet connection often for no apparent reason
Year old MacBook Air loses connection Internet (cable modem) almost every day, in my house and other places where the connection is wireless. I have an appointment in the preferences system, network and cross the help me / diagnostic process and aft