What vmnic driver to use for the spine of 10g

Similar Questions

• What HARD drive I use for Satellite L305D-s5868?

  I need to replace the drive hard on my * Satellite L305d-s5868 *.
  What is the form factor for a replacement disk?
  * (Width, Height, Length) *.

  Can a * SATA II drive * be used?

  TIA

  I agree with Akuma. You need a HARD drive 2.5 SATA.
  The SATA controller is compatible downwards, which means you can use a HARD SATA II in SATA drive I have controller.

  Cheers mate

• SBS 2011 ceased to recognize drives external, used for the backup of the shadow

  I have two external drives used for backup on a SBS 2011 server. The other one is a WD drive a Seagate. Shadow copy not now don't recognize either drive.  Both drives worked on the server for about 9 months and are not anywhere near full capacity. The server is now saying that it can't find the drivers for external drives, he previously used the last 12 months. Both drives have been tested, are recognized and work correctly in any windows 7 computer. Is there a way the GET the server again recognized the readers?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  Small Business Server

  Hope the helps of information.

• Satellite C850-1E7 - what SSD can I use for the upgrade?

  Hi all

  I am looking for one SSD hard drive.
  Problem is the documentation does not specify whether the system is Sata 3 GB or 6 GB.
  I understand that if I buy a 6 GB SSD and the system supports only 3 GB, there is work, but I would rather try to localize "cheaper" 3 Gb SSD if the system supports up to that speed.

  Look under the hood, the current HARD drive is a SATA 3 Gb.
  Any of you know?

  Satellite C850-1E7 (serial: YC325575R)

  Thanks for any help.
  See you soon
  Chris

  Hello

  You could easily find what SATA controller not Satellite C850-1E7 support.
  Different hardware diagnostic tools she will provide you with details.
  I recommend you to install and test software like Sisoft SANDRA or Everest Home Edition.
  Both will provide the device properties built in Notepad.

  But I think that the device supports the SATA II (300Mbit/s) controller.

  > I understand that if I buy a 6 GB SSD and the system supports only 3 GB work remains
  Yes, it's okay because the SATA controller is compatible to the bottom

• What settings should I use for the rear button focus put in place for the d5 mark 3? TIA

  5 d Mark 3

  When you press the menu button, highlight on (using the knob on the front of the camera) menu "C.Fn2: disp.» "/ Operation" orange. (it's the icon of a camera that has an index of points for a light meter below - right of the wrench, to the left of the star icon).

  Each of these menus on the 5 d III have several pages.  This is the 2nd page (the 2nd point from left to right) who has the category of "custom controls".  Note that (using the wheel on the back this time) and click on the set"" button.

  Which displays a menu showing each of the important controls on the back of the camera and what they do.  Highlight the icon for the shutter button (this modifies the behavior of a half-press) and change to 'measure and AF start' to just 'start of counting.

  "AF-ON" button (on the back of your camera) is probably already put 'measure and AF Start' (I think that this is the default factory setting).

  If you're not so much focus to enable back-button (which is probably already active) you're more "power off" the focus when the shutter button is pressed to halfway.

  Good luck

• That must make the password stored in the JAGENT portfolio, and what JAVA_HOME should I use for the pw_agent_util.sh command?

  I configure the GoldenGate Plugin for OEM. There is a step to create the portfolio. The documentation is not clear on the role of the provided password. If I run the JAGENT as user oracle, it must match the password for the oracle user, or is this separate password? Also, should I use the jdk to OEM agent to set JAVA_HOME?

  ./pw_agent_util.sh - jagentonly

  Pat,

  Morning.  Good to see that someone is working on the use of the plug-in for GoldenGate in OEM12c.

  If you use the plugin 12.1.0.2, you will be much better with the preparation of reports on the processes of GoldenGate.  In order to get the 12.1.0.2 plugin to work, the 12.1.3.0 JAgent is necessary and can be downloaded in the distribution of the Oracle GoldenGate monitor (Agent Monitor configuration Oracle #GoldenGate |) DBASolved).  If you use the old plug-in 12.1.0.1, the JAgent is integrated with the GoldenGate Software (Oracle GoldenGAte(11.2.1.0.1 and later) and Oracle Enterprise Manager 12 c |) DBASolved).  I recommend you take the new plug-in!

  Now to the address that ask you the password. The password is stored in the portfolio under the House of GoldenGate ($OGG_HOME/dirwlt) and is used directly for the JAgent to connect to the EMAgent and connect with OEM.  The password associated with user name is configured in the $JAGENT_HOME (different depending on version, look for the Config.properties).  Then in OEM, the user name defined in the Config.properties and the password in the portfolio must be provided before OEM GoldenGate targets will come.

  The $JAVA_HOME parameter is dependent on the version of JAgent you want to run.  The JAgent 12.1.3.0 to using the JDK 1.7 or higher.  The JAgent shipped using JDK 1.6.

  Thank you

  Bobby

• What is most commonly used for the Cache Timesten IMDB?

  Hello
  TimesTen focuses on the description of table based on cache groups and there is no way to load a schema at the same time.
  
  Is this means that it is designed to be cached especially a small number of large tables than on the tables of any scheme, support something more similar to an application?
  
  I would like to know what is your knowledge, the more common use of timesten.
  
  Manage manually a large number of table creates problems when some force is "disappeared" to timesten creating the CG.
  
  I tried to tables from a Primavera P6 project management schema cache (187 tables and other views more, etc.). Trying the scheme has reported an error about a missing relative to a constraint). Loading of a given subset resulted in very small number of set tables cached in reality due to the lack of other related tables.
  
  
  So if timesten is a very good solution, all the necessary step to get a consistently large number of cached tables seems to be is not so effective.
  
  Thank you
  Fabio Alfonso

  An application using TimesTen IMDB should be designed for TimesTen and the necessary hierarchy for it to load properly. Primavera is designed without a doubt not properly.

  Most people use the IMDB as a cache to environments of volume of very high transaction or in environments where peak loads exceed the ability to execute transactions directly to a RDBMS on disk.

• This driver to use for the printer hp 1115, system windows 7, hp computer and where can I gain access to this driver, thanks

  Where can I find the driver and that is free to access?

  Go to HP.com, drivers and update and enter the name of your printer it. Brings you to the page where you can download complete the pilot or the installation CD. You can also access the system drivers for your HP computer on this site as well (if you need it).

  FYI, Windows 7 has most drivers except the generic devices such as disks. All the hardware drivers etc are provided by OEMs.

• Should what Management Interface I use for the free version of ESXi

  I plan on the implementation of the free version of ESXi on a server with Intel VT technology.

  I have a management interface for my free version of ESXi.

  I was told by someone that I need to manage VSphere.

  I can just purchse VSphere and should be fully compatible with the free ESXi?

  If so, should what version of VSphere I buy?

  What are my alternatives to a manageable GUI that won't cost too much? (I intend to manage only 5 virtual machines on the ESXi server)

  Thanks in advance!

  When you download the VI client from the http:// you the Virtual Infrastructure Client GUI.  Not a powershell environment.  See attached screenshot.

• What / which method to use for the duplicate database

  Greetings, the Experts of Oracle
  
  I'm trying to replicate a database (src) of production to another machine (dest) for developers to do some tests before applying the changes to the production environment. The src and dest running Oracle 10 g 2 RHEL 4, 5.
  
  Due to the firewall in our environment policy, may that src and dest will not be able to see each other on the network. Also the directory structure will be different on src and dest.
  
  Now, there seems to be several methods available to achieve this:
  1. duplicate with RMAN, something like:

  rman TARGET sys/password@src NOCATALOG AUXILIARY sys/password@dest
  DUPLICATE TARGET DATABASE TO dest NOFILENAMECHECK;

  2. backup/restore with RMAN.
  3 use the Import and Export (including impdp/expdp) utilities.
  
  From my research so far, option 1 seems to be the method for this purpose. He also manages the directory structure difference quite well. However, it requires connection to src and dest simultaneously during replication. Is there a way it could be done from a backup image instead of a connection to the database of the CBC? Other 2 options are possible? Are there any other ways I could duplicate the database given the situation?
  
  Appreciate your help.

  If the CBC and destination cannot access another, then the simplest option will be #2 (restore a database to a new host: scenario) who also address the different directory structure.

• Satellite C850D - 11K - what CPU should I use for the upgrade?

  Hello
  Is the processor possible to install the C850D 11 K to make it faster without the risk of overheating. Thanks in advance

  Hello

  Your laptop is equipped with a mobile processor AMD Comal and possibly you could use the following processors:
  Processors AMD Comal A10: A10 - 4600M
  Processors AMD A8 Comal: A8 - 4500 M)
  Processors AMD A6 Comal: A6 - 4400M
  Processors AMD Comal A4: A4 - 4300M

  But first he must know that upgrading the CPU is not supported by any laptop manufacturer. These updates is therefore at your own risk. Maybe the device would serve, but there is a high risk that the BIOS would not deal with the new processor and the unit does not illuminate.

• What function can I use for the mode of addition of the worlds effect composite two?

  How can I do this without browsing the costume?

  ADD mode means R = Ra + Rb, G = Ga + f, B = b + Bb, A = Aa + Ab

  Is there a simple way of composite worlds integrates what AE?

  Hi Tenshi,

  You can do like this:

  PF_CompositeMode compositeMode;

  compositeMode.xfer = PF_Xfer_ADD;

  compositeMode.rand_seed = 0;

  compositeMode.opacity = PF_MAX_CHAN8;

  compositeMode.rgb_only = FALSE;

  compositeMode.opacitySu = PF_MAX_CHAN16;

  ERR (suites. WorldTransformSuite1()-> transfer_rect (in_data-> effect_ref,

  -> quality in_data,

  PF_MF_Alpha_PREMUL,

  PF_Field_FRAME,

  & world2-> extent_hint,

  & world1,

  & compositeMode,

  NULL,

  0,

  0,

  world2));

  You can replace PF_Xfer_ADD with any mode of transfer you like (you can find them in AE_EffectCB.h).

  See you soon,.

  François

• What driver to use for a HP 8563 A Spectrum Analyzer and a Giga - tronics 12000 has

  What driver to use for a spectrum analyzer HP 8563 and a Giga-tronics 12000 microwave synth... these two are not in the driver list can someon help

  Since there is no drivers, you can create your own, request one, use the Instrument i/o Assistant, or hope that someone has one and he posts here. On the creation of a help or to ask one, see the main page of the Instrument Driver Network . As long as you're familiar with the instrument and the manual, creating a driver is not so difficult.

• What is the MTBF method, used for the cRIO 9012, is the method of counting of Telcordia under what conditions?

  What is the MTBF method, used for the cRIO 9012, is the method of counting of Telcordia under what conditions? (Temperature, humidity, etc.)

  Hi jojosalud,

  According to the specifications for the cRIO-9012, the MTBF is 330 481 hours at 25 ° C; Question of Bellcore level II.

  Kind regards

• What type of glass or plastic is used for the lens of the camera

  What type of glass or plsastic is used for the protection of camera lens?

  No glass is plastic sony replay for me