What exactly does the empty() method?

Similar Questions

• What exactly does the Time Machine backup?

  What exactly does the Time Machine backup?

  We have a Mac Pro towers (NOT for sale) and Mac mini with several hard drives installed internally.   Time Machine backup all internal disks or just the boot disk?   This can be configured?

  Time Machine backs up your default boot partition. However, if you have more than one drive or partition on your Mac (and it is formatted in "Mac OS extended (journaled)"), you can set the Time Machine to save these drives too. You can do this by removing these drives from the list of excluded items in System-> Time Machine-> Options... Preferences, so that the next backup will include all internal hard drives or partitions that you want to back up too.

• What exactly does the "recovery disk"?

  I'm about to reinstall everything on my laptop but would like to know what exactly is the "recovery disk"...

  I presume that it formats the HARD drive with a clean installation of the operating system and all applications toshiba as a CD burner, VAP etc. are NOT installed and must be installed afterwards?

  Well, the restore CD contains an image of Toshiba. Toshiba picture is a package and contains a Windows operating system, the Toshiba drivers, tools and additional software.
  Simply said that it contains everything that you might find preinstalled on the Toshiba laptop.

  And Yes; the recovery CD formats the drive HARD integer (also partitions) and install everything again.
  It redefines the laptop to factory settings

• What exactly does the Cast Image VI IMAQ?

  Hello world

  I want to convert an RGB image to grayscale. Now, I can do this, using the Cast IMAQ Image VI. But now, I was wondering what exacly this VI only? How does make an image in grayscale to RGB image? What happens under the hood?

  Hope someone can tell me, since I don't really know. Thanks in advance ^^.

  For each conversion type, there are specific operation. In your case VI defines the destination value to the average of the elements of the source of three colors.
  To learn more:
  http://zone.NI.com/reference/en-XX/help/370281P-01/imaqvision/casting_images/

• What exactly is the PACE (beyond what has already been mentioned)?

  Which is exactly the pace on the watch? It shows as feet & inches. Apple says that its distance (feet?) divided by the time (minutes?) which would be feet/min, not only the feet & inches. When you divide one unit by another, the unit resulting must represent both, for example, miles in an hour is miles per hour. My rate as 14-24 current which makes no sense as foot per what? (I know about the calibration of the watch with the iPhone but that does not change the pace a lot). No common definition of PACE seems to match my Apple Watch watch number several times. What does the pace of the watch as simple feet and inches? I asked Apple support several times but genius just saying its distance divided by time, but the result is just feet and inches, which is illogical.

  Hello

  Pace is (indicated in minutes and seconds) per mile or kilometre, depending on which unit you have chosen to use remotely.

• What exactly are the unscaledWidth and unscaledHeight in the mobile element converters?

  Hello

  What are exactly the unscaledWidth and unscaledHeight which are passed to the method Measure [] for a mobile element converter?

  I guess converters start at "default" width and height (so without scales) which is reduced based on the DPI. Isn't it?

  Thank you.

  It is roughly the same as the updateDisplayList method.

  The process to measure and set the minimum limits (measuredWidth and measuredHeight) in the Measure [] function, then in the layoutContents method that you will be spending the actual values (preferred), because it is located in the page layout. Usually, that's what you define as measured limit, but sometimes it can be different, as if the content should be reduced or enlarged to fit a parent container.

• How exactly does the IPhone update program?

  Hello everyone,

  I want to upgrade to the new version IPhone 7. I just checked my status for an upgrade based on the Apple

  program, I'm not eligible, but because I am enrolled in the program of upgrade last month so I have to wait until February to ask the new IPhone.

  My question is, what can I do with the 6-6 s that I am eligible to do the upgrade?

  can I exchange the two? How does the upgrade work? My AT & T w contract expires at the end of this month so the 6 will be finally unlocked. I assumed that I could sell it on the street...

  See this support document for an explanation of the Apple iPhone to upgrade program. http://www.Apple.com/shop/iPhone/iPhone-upgrade-program

  If you are in the program for these phones, so if you decide to upgrade to the 12 month mark, then you have to turn these devices to get the new phone. The other option is to pay them off, how they will be yours.

• What exactly is the "free" offer Adobe Stock?

  Everytime I open Photoshop, I get a screen advertising of 10 'free' of Adobe Stock images. I was interested to see close-up photos, but you won't see any not stick, and the small print in the ad said, "refund of a month on Adobe Stock when you subscribe... an annual plan...". "So it seems that this is not a trial offer free to all, as I first thought - apparently I will be charged for the first month if I decide to cancel the subscription. But this page says "Cancel risk free in the first month." Does this mean I will not be charged for the first month of the trial if I have to cancel ?

  After seeing all the harm that other forum users with the cancellation of the subscription after the signing, I'm not sure I want to do it anyway, but I'm curious to know what really is the offer.

  The offer is basically first month free on a one year subscription. You pay the first month and which is refunded to you. Where it becomes 'free', is that you can download your 10 images, then cancel within the first month without penalty. However, if you do not cancel within the first month will be on the hook for the full year or pay a penalty to cancel.

  You are also right that there seems to be no real way to cancel at this time than to post here. If you have not decided on the conservation of stocks, it may be in your interest to spend. I hate to say that as I'm a big fan of Adobe and Stock.

  You can search for images without being registered for a subscription, you can even add libraries without going through a subscription. You can even license single images without a subscription.

• What exactly does "Experimental support" mean?

  I installed Windows Server 2008 R2 on a virtual computer.  I noticed that the guest operating system is configured as "experimental".

  What means exactly to the virtual machine? If an experimental operating system becomes an OS fully supported within 6 months, and they remove the "experimental" this OS, which changes to the virtual machine?

  Basically it means it works, but they have not tested on all platforms supported, then they mark it as experimental, this means use at your own risk

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

  Tom Howarth VCP / vExpert

  VMware communities user moderator

  Blog: www.planetvm.net

  Writer on "[vSphere of VMware and Virtual Infrastructure Security: securing ESX and virtual environment | ]. http://www.Amazon.co.UK/VMware-vSphere-virtual-infrastructure-security/DP/0137158009/ref=sr_1_1?ie=UTF8&s=books&QID=1256146240&SR=1-1]'. Currently available on roughcuts

• When the metric of attribute CONFIG = "TRUE", what exactly does that mean?

  I am confused with the explanation in the document < scalability of Oracle Enterprise Manager 10 g Release 4 (10.2.0.4) B40007-01 >, he said ' CONFIG: this is a special designation for CONFIGURATION settings that are downloaded
  differently by the EM framework. ». I mean what's the point when set CONFIG = "TRUE"? For example, how could I understand the code below.
  
  < Metric NAME = "MYSQL_MYSQL_DB_VAR" TYPE = "RAW" CONFIG = "TRUE" >
  < display >
  < NLSID label = "mmd_MYSQL_MYSQL_DB_VAR" > MYSQL_MYSQL_DB_VAR < / Label >
  < / display >
  < TABLE_NAME = "MGMT_EMX_MYSQL_DBVAR" TableDescriptor >
  < ColumnDescriptor NAME = "Nom_de_variable" COLUMN_NAME = "Nom_de_variable" TYPE = "STRING" IS_KEY = "TRUE" / >
  < ColumnDescriptor NAME = 'Value' COLUMN_NAME = "VALUE" TYPE = "STRING" IS_KEY = "FALSE" / >
  < / TableDescriptor >
  < ExecutionDescriptor >
  < NAME getTable = "MysqlVariables" / >
  < NAME GetView = "v_result" FROM_TABLE = "MysqlVariables" >
  < Column NAME = "Nom_de_variable" = "Nom_de_variable" TABLE_NAME COLUMN_NAME = "MysqlVariables" / >
  < Column NAME = 'Value' = 'Value' TABLE_NAME COLUMN_NAME = "MysqlVariables" / >
  < / GetView >
  < / ExecutionDescriptor >
  < / metric >
  
  Thank you
  
  Satine

  Hello Satine,.

  A brief response to your query '... ". When a metric is defined on CONFIG = TRUE, the wog is used only to record data and not used for the alert? "is - Yes.

  An explanation of detalied is:
  By definition, a configurable parameter should not trigger an alert. Alert is usually for surveillance and performance measures and not the configuration settings. This is one of the logic that drives the current design you see in MS. Yes, there are policies that can be set for these parameters.

  ECM framework allows you to save the configuration on a regular basis (collection frequency defined in the default collection file), save the configuration, display the history and compare configurations (for example, last configuration current configuration vs known OR saved the configuration of the target vs saved to target configuration B).

  Ragarding MySQL 'official' plug-in, the author (Alex) of the plug-in already posted a message on this thread. My recommendation is to take advantage of the existing range and provide your needs (assuming that is not available out-of-box via the plug-in). Of course, as you have said - it is something that is decided by someone else.

  Kind regards
  -Gaara

• What exactly does Inline object offset 'Y '?

  Hello world

  I'm confused on the subject line y offset. Does that mean exactly? I looked on the help of adobe, here's what it says.

  Inline
  Aligns the object anchored with the baseline of the insertion point. You can adjust the offset Y to position the object above or below the base line. This is the default type of the anchored object. In earlier versions of InDesign, these objects were called graphics.

  Then. the baseline is the insertion point?  If the offset is a negative number, doesn't mean that the base line moves upward? How is the object does not move? assistance from adobe say, 'solve it is offset to position the object above or below the base line', it means not the base line should stay and the object moves as a result?

  Thank you very much!

  The behavior of inlines is also linked to the leadingof of the line in which they find themselves. When the line spacing specified, a line the line begins with the lower edge on the base line and spacing for the whole line is adjusted height of the inserted object. Change the offset y in such cases would appear to make the object appear fixed while moving the base line upwards or downwards. Is happening what is the amount of 'auto' driving is being adjusted to compensate for the offset.

  If the line that the object is inserted using a fixed attack, this attack is in the spotlight, and the inserted object can cover part of the text above. Change the offset will make the Forum appear to move upward or to the low bit at the base, which will be fixed by the assigned key.

  You can also find this discussion from the other day, to be useful: http://forums.adobe.com/message/2722774#2722774

• "Bluetooth is not supported by any version of windows servers... what exactly does that mean?

  I am trying to set up a bluetooth connection between my mobile (Nokia X 6) and the new Acer lap top of page that is running windows 7.  In the past, when using Vista and my Samsung phone it was easy through "control panel."  With this new Windows7 however, it does seem to be an option to set up bluetooth.  There is however "help" a section ' how to set up bluetooth or other wireless connections, which begins by saying that you can transfer information via bluetooth and other wireless means, he then goes on to describe these "other" methods wireless, adding a note that "Bluetooth is is not supported by any version of windows server.  The lap top itself has a long side button Wi - Fi bluetooth button, which don't "turn on" or turn on when I press on it.  I'm not very technical interest and just use the computer for my music and photo organizing and other simple functions.  Apologies if it sounds ridiculous, but I think I'm getting conflicting information, is always available for use with windows bluetooth 7, if so does that mean say "he is not supported by windows servers?  I just want to know if I forget something really obvious or if I should stop trying altogether with all bluetooth and focuss on other file transfer methods?  All the advice in plain language or pointing me in the right direction will be so appreciated, thank you very much Frances

  Turn off the laptop and look at the bottom of this one.  If it doesn't have Bluetooth installed, there will be a white sticker with BLUETOOTH printed on it.

  You don't have an edition of Windows Server.  Those who would be Windows Server 2003, Windows Server 2003 R2, Windows Server 2008 and Windows Server 2008 R2 and a bit like Vista and Windows 7, they come in many varieties, Web, Standard, Enterprise, data and 32 and 64-bit editions.

  When you go into the Control Panel, you see an icon for Bluetooth?  Bluetooth does appear in Device Manager?

• What battery does the dm4x? Or what model number is the dm4x?

  I just ordered a dm4x of Costco, which comes stock with a battery 6 cells.  I would also like to order the upgrade battery 9 cells, but I have no idea what battery model it has need.

  There is no number listed as a dm4x model, so I would say I have the dm4-1000. or the dm4-2000 maybe?

  The computer can't for two weeks, so I don't have the tag to refer to another and surprisingly the model number does not appear in one of the specs on the site of hp or costco.

  I think that the MUO9 is compatible with the dm4x, but I would really like to know for sure before you buy.  If another user of dm4x tell me what battery they use, or maybe what model they have, it would be greatly appreciated. Thanks in advance for any help

  For anyone else who may be looking in the dm4x:

  The product number is LX130AV

  It indeed takes the MU09

• What exactly does a VPN do?

  I just set up a VPN using OS X Server on a Mac Mini!

  Feeling pretty proud of being given that all my attempts in the past have not led to anything, but now that I put it in place, is it in reality? I was under the impression that if I am away from my home network, I would be able to see my desktop computers or maybe be able to sync to my iPhone via the iTunes wifi synchronization feature, or maybe file transfers, screen sharing, access my Tivo using the records of iPhone app and watch with him... So far I was not able to do this. I know using a VPN is MUCH safer in public hotspots, but felt like having him many more benefits.

  So please help me someone!

  Thanks in advance!

  Josh

  You're sort of on the right track.

  Take a common scenario - your home network is led by a router (either provided by your ISP, or a third-party device), which uses the (NAT) network address translation to share a public IP address among multiple devices on your internal network. This means that your Mac, your phone, your iPad, your smart TV, Blu - Ray player, printer, etc. are all connected to the private LAN and can get out to the internet through the wider NAT router.

  NAT also prevents external devices to your internal network - so no remote users can print to your printer, etc.

  With a VPN, you bust essentially a (small) hole through the NAT device to your device remotely, on a public network in some coffee shop downtown, has a connection to the private internal network. It's just that it is on the internal network, but as a second class citizen.

  This means that when it is connected through the VPN, you can, indeed, access all internal resources you could if you were physically at home - you can print on your printer, copy files to and from a file server, etc..

  The witch hunt, it's that, normally, and for valid reasons, the automatic detection does not work through the VPN. This means that when you are in the Finder and you try to connect to a home server, you can not see the server in the Finder sidebar. If you start screen sharing, you won't see the other hosts of the network as being "available". In order to achieve this level of interaction, you must know the address of the host (s) on the internal network. If you know the address of your file server, for example, you can use the Finder go-> Connect to the menu server, enter the address and connect. It just does not happen automatically. Even if you want to stream your TiVo, you must know the IP address of your TiVo (assuming that the TiVo app allows you to specify an IP address and is based not only on local Autodiscover).

• What cases does the HP Pavilion Elite m9040n use?

  I want to put new parts inside, because it is quite old. I want to know if all the pieces of my will enter into it. I looked around, the only thing I could find on it is that it is a medium-sized ATX. You are looking for an exact name please!

  Yareen, welcome to the forum.

  It takes a Micro-ATX motherboard (Micro-ATX-24, 4 cm (9.6 inches) x 24.4 cm (9.6 in).  The key is to ensure that the spacers for the motherboard in the case match the holes in the motherboard.  This may be a problem with new motherboards and old cases.

  Well, to tell you the truth, if you don't want to buy a new computer, I would buy a new case for less than $100 and a motherboard to match.  It would be much easier.  Of course, you can always buy a new HP desktop computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.