What happened to my computer... NOTHING WORKS ANYMORE?

Similar Questions

• Since the upgrade to Yosemite to El Capitan, my life is a misery! I use the software Adobe CC - well, I DID it! Nothing works anymore. I have to Forcequit all apps and nothing loads... anyone?

  Since the upgrade to Yosemite to El Capitan, my life is a misery! I use the software Adobe CC - well, I DID it! Nothing works anymore. I have to Forcequit all apps and nothing loads... anyone?

  I have all the latest upgrades.

  My operating system is El Capitan 10.11.3

  I have Adobe CC 2015 Illustrator, InDesign and Photoshop. None of them will launch, open or close.

  My mac is so slooooowwww. I'm sitting for 3 days I look at a spinning wheel. Can anyone help? My roof looks inviting at the moment!

  running CC2015 10.11 and it is compatible with El Capitan, so the question is what else is on your system that may be the cause of the problem:

  Please run a report of etrececk and post the results here

  http://etrecheck.com/#about

  This will give us one overview of what else is running on your system

  If you are currently using any anti-virus Mac you must uninstall it immediately from your system. See web developers page for instructions

  If you currently use one "own my ' or 'custodian' of products you must remove them from your system immediately.

  Restart and reset the PRAM

  How to reset the NVRAM on your Mac - Apple Support

  and in the meantime if you need to use CC I suggest you try the following

  start in safe mode and run CC

  Try safe mode if your Mac does not end commissioning - Apple Support

  or Create a NEW account administration and the boot into that and run CC

  and see if either of these procedures to help.

  and if you must go on your roof with a lounge chair, some Bob Marley albums, not a note.

• What happens if my computer crashes?

  What happens if my computer crashes? Can I buy a new computer and reload the application without extra cost?

  Yes.

  It couldn't be easier.  Simply log in with the application of office cc (https://creative.adobe.com/products/creative-cloud) on your new computer and install your programs of cc.

  You can even sign out of your old computer using your new computer if the old background, no problem (for adobe cc).

• someone hacked my account and changed my password. I don't know what to do... nothing works. should I go cops with my laptop? HELP :(

  The other day, two guys hacked into my account. I would like to make those who attended it.

  I closed my facebook account, but I have many others, that I couldn't at the time.

  I feel lost because I don't have the slightest idea what to do. Nothing works. I tried everything I could think of and I can't reset my password without loggin first and they changed my secret Question

  Help, what do I do?

  You don't say which account you refer.

  If you are referring to a post account HOTMAIL here: -.

  http://windowslivehelp.com/forums.aspx?ForumID=b782602b-8e7c-40D8-a66b-b44824497a17

  Select the 2nd or the 7 article on the left side of the link above.

• What happens if my computer cannot process a pretty quickly timed loop?

  If I created a loop timed, but required that more important than my computer treatment is able to do before the next iteration the tasks within the loop, what happens?  It gives me an error or I miss loops?  In the end, I need to know how can I know if the problem occurs.

  Please see the setting the Mode of a section of the loop timed in the following document.

  http://zone.NI.com/reference/en-XX/help/371361F-01/lvconcepts/configuring_the_labview_timed_loop/

  The left consider the following section describes the information that you can access on the previous iteration of the timed loop.

  http://zone.NI.com/reference/en-XX/help/371361F-01/Glang/timed_loop/

• What happens to your computer when you compress your old files when running disk clean

  What happens to clean your computer when you compress your old files when running disk?

  Why is it you would compress the files while running a cleaning disc?  http://www.help2go.com/Forum/computer-help/105414-compressing-old-files-disk-cleanup.html

• Problem with the executable files, nothing works anymore.

  Hi, my name is Richard and I have a problem with my computer.

  None of my executables work more, they all stop responding when I open them up (if they even offer) This includes but is not limited to, my anti-virus and malware... Makes to solve this rather difficult.

  Note: Very important: when my computer starts, (he did not before) it now opens a tab of Google Chrome instantly with the url:

  http://gangnamgame.NET/

  With Korean words... It is clearly a malware problem, I think, but I can't fix it. And she is taken care of my computer because I can't open any program apart from the basics like wordpad and my browser.

  Please, I need help. I'm under W7U.

  I've tried https://support.microsoft.com/nl-nl/kb/950505, but when I tried to enter "REG IMPORT Exe.reg" nothing happened, just a black for 0.01 seconds and then screen nothing after that.

  Do not restore points having adapted makes things much more difficult. I suggest you try this approach. You need to do it quickly because Windows can replace the backup copy of the files of the register at any time.

  You can restore your registry files manually to a previous point through the steps described below. The process is complex and requires some typing prudent . Ask a computer-savvy friend to help you if you lack experience in this field. You may reset your password to an earlier value.
  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3 log in as administrator if you are prompted.
  4. Select repair when prompted.
  5. Select the command line in the menu.
  6. identify the correct drive letter for your Windows installation. It could be one drive other than c, but it will not X:. You do this by typing commands
  DIR C:\Win*
  Dir D:\Win*
  dir E:\Win*
  until you find the Windows folder.
  I'll call this "Q:" drive
  7 type these commands:
  CD /d Q:\windows\System32\config
  xcopy *. * Q:\MyRegBack\
  CD RegBack
  dir
  8. review the dates of the software, system, and SAM files. The files created before or after that is your problem?
  9. If they were made before the problem appeared, you can then type these commands:
  copy software / y...
  /y copy system...
  /y copy Sam...
  (the two points are part of each order)
  10. restart normally. If things don't work then you can go back by copying files from the original register of Q:\MyRegBack to Q:\Windows\System32\config.

• What is a plateau of DesktopAgent and what happens when it does not work properly?

  When you start Windows Service Pack 3, I get a message saying that DesktopAgent tray is not working properly.  I'm not fallen on what this problem is or causes does not properly.  What is and how to fix?

  Hi Rose @ Minnesota.

  For your information, Agent Desktop tray is a program used by Qwest to update their setup program during installation DSL (digital subscriber line) based on connections to computers.

  Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• What happens if my computer (XP) joined the domain network?

  Hello.  I would like to know a little better on the domain network.  My computer is currently the Working Group on my home network.  I read on the domain network and it is said that

  "If you have a user account on the domain, you can connect to any computer on the domain without needing an account on this computer." (from windows help and support)

  Does that mean exactly?  This means that if my computer joined to the domain, other computers on the same network of domain can access all the files on my computer (the files that I have has not yet implemented to share)? or does this mean that other computers on the domain can connect to my computer as remote desktop? (I do not want that to happen...)

  It seems like a lot that the office uses the domain network and I would like to know how it works.  I read some articles on the field and how to put in place and other things, but I couldn't specify my question.  I appreciate if anyone can help my answer.

  Thank you very much.

  Hello

  Using domain causes a topology around real server (like Windows 2008).

  Companies use this topology because of the size of their system and the need for central control.

  There is no advantage to using such topology for small home network.

  If you use the parameter field and that you do not have a General with your network domain server will not work correctly.

  http://en.Wikipedia.org/wiki/Windows_Server_domain

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• What happens when your computer dies and you need to reactivate your applications on a new computer, but you can't turn them off the old computer?

  My computer died recently. I had the right to install applications on two different machines. My new Mac is here and my panic to get back to work by using the CC apps, I reinstalled the on the new machine. Now I'm able to use them on my laptop because I wasn't able to disable out old Mac applications and this is why Adobe think I used my two installs.

  Hello

  You can actually have installed creative cloud and on two computers, signed as long as you don't use it on one at a time. Download and install as you did on the first computer, sign in to your Adobe account on the Adobe using your Adobe ID website, download the desktop app from clouds, then download the software. Sign on a computer that should not be used: log in and log out of the desktop Adobe Creative Cloud application

  You can download the installer for Creative Cloud from here:
  Creative cloud help | Creative cloud desktop.

  After you install the creative Cloud desktop application, you will need to sign in with a login password and Adobe. Then you can install applications. This link provides more information and step by step instructions, if you need: CC help | Download, install, update or uninstall applications

  Hope this helps

• How to unsubscribe and how to remove all downloaded items emergency because nothing works anymore?

  See above

  
  

  Hi Allesindutt,

  Please let us know what service do you use?

  Please uninstall programs to remove them from your machine.

  If you want to remove the setting up of the files that have been downloaded and then remove them from your download folder.

  Kind regards

  Anand

• After a download desperate 4 days of PSE12 in my Windows Vista computer - nothing works!

  4 days ago, I bought an improved version of the PSE 12 on Adobes web link to replace my job well PSE7 version. Probably the deal more stupid I ever made. 12 PES should have all installation failures and problems in the world. After countless attempts and reading Adobes 'bible' of all kinds of trouble incredible installation 3-4 days, it is to give up. I even had the place running at two attempts, however when closing program never restarted. So if Adobe cannot give the best service or come up with a significant more robust version of PSE to install, I simply conclude, I reverse the deal-give me the money.

  Send me an email are deleted by the moderator >

  Through a period very long chat with one of your adobe experts and the fact that the missing files more should be added by Adobe, seems finally now I can start working with the software pse12.

  Med vennlig hilsen

  Kjell Hogseth

• What happens if my external drive "working files" breaks down?

  I use two external drives to save and back up my files.  The files organized, edited the reader of 'work'.  If the drive working breaks down, how can I restore it from the player of "backup" that contains just the original, unmodified, the files placed in folders by date of importation?  I realize that catalogue contains all the changes, but how to return to the Organization?  Anyone using a Raid 1 configuration for two disks mirrored?

  Maybe I don't make myself clear. How to take the 'back-up' disc, containing original photos not published, ordered by date of import and convert the disc format 'work' catalogue in the LR4 will recognize?

  It's great that you think about it now, instead of this disaster.  Play well!

  The "second copy" option in the dialog box import is ideal for temporary backup, while the pictures in your main backup system, but it is a nightmare to restore from.  There are options to rearrange disaster, but it is better to avoid.

  Rather than RAID1, I would suggest looking at backup synchronization software or a file - I love Vice Versa on Windows or Chronosync on Mac - to keep a copy in the mirror of the work unit.  If you use RAID1 and photo gets deleted or damaged, it is immediately deleted/damaged on the second disk RAID, while the file backup/synchronization software would go less often, giving you a chance to recover it.  Many also offer one option 'archive' for deleted photos, moving them to another folder.

• not a question, a statement: I've just updated to the latest you have. I had to use the EXPLORER of this post. He is so badly broken that I can use is no longer on my alienware. everything goes black, I can't scroll the page, nothing WORKS ANYMORE

  See direct links to photobucket too, I can't go back to a previous version cause I don't have the time to make a backup of it.
  I load and I get this.
  http://i479.Photobucket.com/albums/rr156/joshiki_r/brokenmozilla.PNG
  I hover over the 'x' now hidden in the corner to close it, I get this
  http://i479.Photobucket.com/albums/rr156/joshiki_r/brokenmozilla2.PNG
  It all comes back, but everything gets all flashy and could give someone a which

  http://www.Mozilla.com/en-us/Firefox/all-older.html

  http://support.Mozilla.com/en-us/KB/installing+a+previous+version+of+Firefox

• What happens when "Still waiting for network when starting the computer and logon" is enabled and that the computer is not connected to the network?

  In MMC, I created the group policy and found through web search that computers with mapped network drives can connect better if "always wait for network when starting the computer and logon" is enabled...  So far, it has been very nice to have allowed.  Is no longer mapped network drives see the place as disconnected.  But what happens if the computer is not connected to a network?  Say the wireless router will turn off and your computer always 'wait... '. "turned on, should the user could still log the computer timely?

  Check these:
  Troubleshooting intermittent slow connection or slow start of http://blogs.technet.com/b/instan/archive/2008/04/17/troubleshooting-the-intermittent-slow-logon-or-slow-startup.aspx
  Priority and group policy processing
  http://TechNet.Microsoft.com/en-us/library/cc785665%28WS.10%29.aspx