What happened to the last visited sites?

Similar Questions

• There is an option to 'save all tabs before closing' - what happened with the last update?

  In formats previous Mozilla, if I had more than 1 tablet open as: Facebook, Aol.comand much much more. When I was ready to close the window and hit the 'x' at the top right, I'd get the options "save tabs & close" "close tabs" "Cancel".

  This gave the option of not having to look for things once again, if you are looking for the same tabs all the time. It's the same exact box you get now, but with the option 'save the tabs and close.

  This option can be added back?

  Thank you for taking the time to listen to...

  Clicking history > restore previous Session, restores your tabs and windows of the previous browsing session in Firefox 4

• Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  If a shortcut is used while Firefox is already open the error will not occur.

  For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

  Hope this helps.

  Olivier

• What happened to the brushes PS that allows us to get on the Adobe site? I can't find them.

  What happened to the brushes PS that allows us to get on the Adobe site? I can't find them.

  Hello

  Can I know what Adobe site? Do you mean https://creative.adobe.com/addons

  Thank you

• What happens on the site that I do if I cancel the subscription of DW cc?

  I am totally new to this.

  I would like to subscribe to the cc of DW. What happens on the site that I do after I stop the subscription? The site intends to continue to work?

  There are answers about 2 GB of storage space. How storage works with my site? I thought that I need to buy a hosting to another company. I couldn't find a clear answer. Thanks for help.

  Dreamweaver is an HTML editor... it allows you to create HTML files for a Web site

  Web HOSTING is where you put your HTML files after you create them... There are literally of hundreds (perhaps thousands) of web hosting companies

  Click this pre-filled Google link to know more about web hosting companies

  2 gigabytes of storage cloud that comes with a subscription (or 20Gig for 'all' plan) is for backups of files, not web hosting

  The files that you create are yours to keep... Stop paying for a subscription of Dreamweaver and you can no longer use the program

• What happened to the "bookmark this page" in my bookmarks drop down box? I need! I am not computer savy and want to just scroll through all the pa marked with a bookmark

  The toolbar previous at the top of the screen re: bookmarks had the easier and is more agreed for me (and I'm sure MANY OTHERS) to just click, scroll, stop and click and fact! I'm on page that I bookmarked. So now, no? and what happened to the "mark this page" option initially drop down list? It's so easy. I have to develop records, files, plugins, etc...
  What in is he developed a method for people who are geeks high tech click on something that will lead THEM to last orders?

  Add code to the file userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  /* move "Show All Bookmarks" to the top of the Bookmarks drop-down list */
  #BMB_bookmarksPopup #BMB_bookmarksShowAll {-moz-box-ordinal-group:0}
  
  /* move "Show All History" to the top of the History drop-down list */
  #PanelUI-history > * {-moz-box-ordinal-group:3!important}
  #PanelUI-history > label.panel-subview-header {-moz-box-ordinal-group:1!important}
  #PanelUI-history > #PanelUI-historyMore {-moz-box-ordinal-group:2!important}
  

  The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

  • http://KB.mozillazine.org/Editing_configuration
  • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
  • Use a text editor such as Notepad to create a userChrome.css (new) file in this folder (the names are case-sensitive)
  • Paste the code in the userChrome.css file in the Editor window and make sure that the userChrome.css file starts with the default @namespace line
  • Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as userChrome.css. Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not userChrome.css.txt file

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

• What happened to the arrow on the rear buttons which allow to jump around in your story?

  In previous versions of Firefox, there is a small arrow attached to the previous/next buttons. By clicking on this arrow has shown a menu of the last 10 sites you've visited and allowed you to skip backward or forward, without having to press the back 5 times, for example, to join the fifth last visited website. Where's the little arrow? Can I turn on somehow?

  Right click on the previous/next buttons for a list of visited sites.

  You can also consider installing this add-on: https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/

• What happens when the photo of system library is on an external drive and then the system creates a library of Photos? How do merge you them?

  What happens when the photo of system library is on an external drive and then the system creates a library of Photos? How do merge you them?

  Your library system can be on an external drive, if the drive is Mac OS extended (journaled) format and mounted on-site.

  But you must be careful, your external drive is always connected and available before the Photos and to import new photos.

  If Photos opens a different library, news, you can switch to the library on your external drive by double clicking on an external library. You can have several libraries, no problem.

  But pictures don't have any tools to merge libraries. You can switch between libraries, then open them alternately.  To merge two libraries export the photos of the smallest library and import the photos exported in the largest library.

  Or use third-party "PowerPhotos" to move photos between libraries.  But the merger is not supported in the free trial version. You must purchase the full version. You can download it here: Fat Cat Software

• What happens to the values of the variables cRIO restarts?

  Hello!

  I am currently developing a software that runs on a cRIO as a start-up program. I encode a production counter to determine how many products passed the tests. A web server will be used sometimes check this counter...

  What happens to the value of the counter if cRIO power supply is turned off? The counter will reset to 0 when you restart? If so, how to avoid this behavior and restart with the last count?

  Hello

  Of course, what happens to your variables and what is happening in your program depends on... your program.

  If you do nothing your variables, they will have their value by default when the program starts.

  A way to change this behavior is for example save the value of variables in a text file and read these values at the beginning of the program.

  Hope this helps,

  Paulo

• What happened to the Windows Media Player toolbar?

  I recently downloaded the Windows 7 RC and all my programs and all that work very well, with a few exceptions, but that is because I get all my programs on another partition and another thing is that I didn't see the option to use the windows media player toolbar. In windows XP and Vista, you can set it so that when minimize you WMP, all control buttons appear in the taskbar. Now on Windows 7, it doesn't happen and I don't see an option to do so. I know that you can set it so that there the samll box and it will always stay on top, but which takes place on my monitor. I liked it much better on the task bar. Nobody knows what happened to the toolbar, or is my version of Win7 Glitching?

  -Windows 7 RC Build 7100.

  The tools for Media Player toolbar has been removed because in Windows 7, you can control the media player using Aero Peak of the taskbar. When your mouse on the icon in the taskbar with multimedia and the WMP player narrowed down to the taskbar, the peak flyout box will appear and you can control the media here. Jonathan Matthis aka "7test" on MSN QnA
  Chief Administrator of the Site
  Windows 7 QnA
  http://Windows 7qna.ning.com

• What happens if the RAM requirments are not met?

  In the last day of my s/n class, we had a discussion on this topic.

  Oracle 11.2has 1 GB of RAM, so it takes 1.5 GB RAM SWAP. What happens if the requirment is not filled, lets say there are 1.2 GB ony?

  I am convinced that the installation of the software (Oracle Universal Installer) can be transmitted - just by forcing it to 'ignore' this error.

  However, the database itself will have no chance to come.

  Sorry, I'm just working threw studyguids and there is no time to set up a vmware box

  Yes, I know running below requirments is just a stupid idea.

  Concerning

  Christian

  I think that I misunderstood your question - you are asking about the 'requirement' RAM or swap? You don't have to comply, but if you have inadequate can degrade the performance of RAM and inadequate swap could cause errors. On most of my VM VirtualBox I must run low level R & D with well under the recommended minimum, which is OK for the job.

• What happened to the feature to get around on the artboard by pressing the space bar and dragging with the mouse?

  What happened to the feature to get around on the artboard by pressing the space bar and dragging with the mouse?

  cwalker,

  If it does not, it may be time for the list:

  Sometimes, (some) things may fail or stop working for no apparent reason. When (other) possible reasons/remedies do not work, it is perhaps a kind corruption (temporary or permanent), or even preference settings which disturbs, which can be cured with something on the following list put in place in order to provide a catch-all solution for otherwise intractable cases. It starts with a few easy suggestions and safe) 1 and 2) for cases less serious and goes two ways 3) and 4) to reset the default preferences (easily but irreversibly and more laboriously but more completely and also reversible), then follows a list 5) various other possibilities, and it ends with a complete reinstallation 6). If no other suggestion doesn't work, or if no other suggestion appears, you can start on the list and decide how to go or who can apply.

  The following is a general list of things, try when

  (A) the question is not in a specific file,

  (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

  (C) It is not caused by problems with opening a file from external media (see below).

  You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically may be corrupted/inconvenient preferences); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  6 (A) uninstall (check the box to delete the preferences, if any), B) run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) and C) reinstall. It is important to use this step three way: otherwise, things may persist.

  http://www.Adobe.com/support/contact/cscleanertool.html

• What happens at the same time integrate codes if a user leaves their company and their CC license is cancelled?

  I run a small (two people) web company that uses CC. We are about to add an employee, so I turn to a business account and their setting up of a seat CC. From time to time this employee will develop Web sites that use Typekit fonts.

  If/when this employee left the company and its headquarters is cancelled, what happens to the embed code/TypeKit ID? It stay active to society or just disappear (screwing up policies of the sites that use them)?

  If the codes will go away, is there a simple way to keep track of which incorporate codes are used so that they can be implemented by someone else in the company?

  Thank you.

  Hi Jason,

  Thank you for your interest in Typekit. There will be no interruption to the police which serves for your websites if creative cloud of employee subscription ends. Remove a user from your Creative team subscription has no cloud automatically remove web fonts from Typekit kits; you would need to connect to the Typekit website and chose to delete the fonts as well.

  Typekit Support will be able to help you transfer these kits to another employee who has creative cloud or, if this isn't an option for some reason, convert the account Typekit a standalone subscription. (The stand-alone Typekit plan would be charged separately creative cloud; current subscription rates are available on our Web site: https://typekit.com/plans.)

  In both cases, write to us at [email protected] for more information when (if) you need to make these changes.  You can also feel free to contact us at this email with any other questions on the use of Typekit.

  I hope this helps!  Best,

  -liz

• What happened to the Web Apps for Web marketing package?

  What happened to the Web Apps for Web marketing package? We have put in place three clients as part of this package as test sites, employing several situations where web Apps had a critical role. Then after that the option to purchase the hosting package disappears, leaving customers without the ability to edit it content apart from removing the tag of the page module.

  I think that this should be left on the Web marketing package, because not all users who might use it need ecommerce.

  Any ideas?

  Joel. Software now everywhere.

  It is not a trial mode.

  This is the phase of development of a site and the developer must know the system, what is the cost of the project, what the customer needs and which package they will use.

  Each project we and know and define what we do and outlines the packet type etc in the contract to the client.

  I have to say that if any valid partner on an issue that has not done this is wrong in my eyes. Sorry:(juste mon avis parce que si quelqu'un est la construction d'entreprises en ligne et sites Web pour les personnes dont ils ont besoin de savoir ce qu'ils font.)

  Many keys of development for SAAS offer everything what but you choose the plan, much of these days trial opens to all features for a short period of time.

  Was a case where the trial modes had limited features, but then people complain that they can't trial features they are interested.

  Regarding the packages themselves: they are not good, not well thought out on several levels and need re-doing.

• On "Back to the last visited slide" feature

  Hello world

  I have a question about the return to last visited slide function, and how do I customize the system cpInfoLastVisitedSlid variable, to restrict some access to the project.

  Because I don't know anyway to keep my word clear and concise, I'll try to explain my question more...

  Version I use: Captivate 5

  Currently, I am working on a project that includes the course content and a navigation set guide.

  Drag each content of course has 3 buttons:

  1. Return to the previous slide
  2. Go to the next slide
  3. Navigation Guide (go to navigation guide menu page)

  The Navigation Guide is a small session 30-slide tell our audience how to navigate and print the pdf version. Here is how we structure the Guide:

  1. menu Page, on the menu page, there are 4 button
     1. button to return to the last slide
     2. button section has
     3. button in section B
     4. button for section C
  2. A section in the guide
  3. Section B of the guide
  4. Section C of the guide

  On each article, there are buttons that can go to their sub-sections and return to the menu...

  the user accesses any slide of course content for the navigation guide. The slide of frist that they will see after entering the navigation guide is the page of menu with 4 buttons. If the user click on the "go back to the last visited slide" button, the button will be going out there where the user was in the slide of course content.

  However, if the user click on the other buttons to view the content in the guide. When they return to the menu, the last visited slide become the last page, they see in the guide... so they cannot exit the guide and return to the course except we assign a button to access a particular slide in the course content...

  Here's the question:

  Is there a way to package the system variable, cpInfoLastVisitedSlid, don't forget to slip that in navigation guide, he visited, and only remember the slides of the course session?

  Thank you for your patience to finish reading my long question...

  and thanks to Lilybiri and RodWard answered my question on How to create user variables to follow the slides in question?

  for the reason that I can not connect to my previous account... but I really want to say, you guys give me a great help.

  The cpInfoLastVisitedSlide system variable is read-only and you cannot change its value by using advanced actions.

  However, you may not be able to achieve what you want by creating your own variable and using the value of the variable system with last few advanced actions.

  First of all, you need to work on all the scenarios where your username do NOT want to jump to the last slide literal has visited, but to another slide. From your description, it seems that these scenarios would be linked to the fact that your username entered the Group of slides explaining navigation. Fix?