What happens at the same time integrate codes if a user leaves their company and their CC license is cancelled?

Similar Questions

• What happened to the "Log-in as long as different user" when the computer is locked on Windows XP?

  I work in the it Department in a company and recently we have improved some of the computer to windows 7. For security reasons, computers must be locked when they are inactive for 30 minutes. The problem is that if another user needs to use the computer, it must be connected to the wide, because even the "shut down" and "restart" were removed from the "locked" screen Now on XP, in addition to these two options, we may also log in as a different user.

  So my question is: is there a way to unlock the computer apart to disconnect the power cable? Should ' t the administrator be able to unlock it?

  Thank you

  André

  Hello

  Yes, you are right. This is perhaps due to the issue of the domain. As I suggested in my first post, please post this question in the TechNet forum.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Running two engines step by step at the same time of a port

  Hello

  I have to run two motors at the same time - was used to move a linear ball screw and the other to get a grip. I do voltage and test on small twist wires, but the tension and torsion must be made at the same time. I must also build capacity for each engine to take several steps, IE. have an engine steps number at speed x and then move x number of speed z steps. The two engines must be able to do. However, I have problems to make the engines to run at the same time and to take all measures. The engines are connected to two RMS Technologies R356 controllers. The two controllers are then connected to a RS485 to USB converter card and this card is connected to one of the USB ports on the computer. Currently, I spend an array of orders to two loops each VISA containing read and written. I have attached the vi to watch. All the stuff in the code synchronization is because a new order cannot be sent to the controller until the engine is running the previous command. If orders are sent right after the other, the controller will not execute the first command and then return with an error.

  Does anyone have a suggestion as to what I'm doing wrong?

  Thanks in advance for any help.

  
  

• Can I run CS6 on the desktop and CS5 on laptop at the same time?

  First of all, let me start by saying that I am a small business owner. I'm at work between 10 to 16 hours a day, every day. I have very little time in my life that I'm not sitting at my desk main macintosh, unless I SLEEP.

  All my my work files on my desktop in CS5. I intend to continue to use CS5 to all working files for now. I bought only CS6 to backsave.

  But I want to LEARN CS6 and work slowly in before making a sudden or dramatic change.

  I want to turtorials, and go through the CS6 curve on my laptop. He finds peacfully beside me, every day. No downtime, I can play, learn and experiment. Without fear of doing any harm to my CS5 files or my mac of main production.

  If I try to run CS5 on the desktop and CS6 on the laptop, at the same time - they CALL HOME, STOP, FREEZE, LOCK UP, or and send me, in any form and to ADOBE PRISON or ABUSE CENTER?

  Someone has an answer for this?

  Yes, I have the answer. No, nothing horrible will happen.

  Bob

• Numbers can view 2 leaves at the same time yet?

  Apple added the ability to see the two leaves of the same document numbers at the same time yet?

  This is a pretty fundamental and essential usability feature.

  Any help appreciated - I'm currently pawing back from sheet to sheet and it is a brutal usability experience.

  Hoping that I missed something simple.

  See you soon

  I suggest opening a completely new instance of numbers by using the terminal command:

  Open /Applications/Numbers.app - n

  the "Terminal" application is in the folder/Applications/Utilities

  then in this second instance of numbers, discovers the same document while selecting the sheet of 'other '.

  This seems to work OK with two monitors.  If you have only one monitor, then you must be small enough to fit windows.

• SATA and IDE at the same time?

  Hello!

  My Thinkcentre M50 (8189) has 2 channels ide and 2 sata ports. I know that I can put 4 devices on the IDE, but is it possible to use the SATA 2 at the same time? It's I can install 6 devices and use them together? (although course off possible problem with the power supply).

  I have read the manual but couldn't find an answer.

  Thank you

  C.

  Yes it is possible.

• BlackBerry Z3 sound and vibrate does not at the same time

  Hi support them.

  I recently purchased the BlackBerry Z3.

  It supports no sound & vibrate at the same time.

  In Normal mode, I activated sound and vibration, but it only gives sound for incoming calls/messages.

  (does not vibrate)

  In vibration Mode, it only vibrates.

  It's the first time I use a Blackberry and I'm upset with the basic functionality works do not.

  Please answer.

  Kind regards

  Sunil.

  I'm glad things are back to normal for you.

  See you soon.

• HOW MANY DEVICE CAN BE USED AT THE SAME TIME?

  Hi all

  I would choose the plan of the student to study in September, I would like to understand how much peripheral can be used at the same time? Because I have an IMac at home and also MacBook Pro retina for use at school? Can I download and use it on this two computer at the same time?

  waiting for response and thanks a lot!

  Cloud license allows 2 activations to time http://www.adobe.com/legal/licenses-terms.html

  -pdf of 200 http://www.adobe.com/content/dam/Adobe/en/legal/servicetou/Software_Terms-en_US-20150601_2.

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

  -An individual account is for one person and may not be shared with anyone else

• If I click on "PIN to the browser" the sensitive axis is unselected and vice versa. I need object "PIN at the top of the browser" and 'sensitive pine' work at the same time. Any suggestions?

  In the latest version of muse to adobe, I have me against "PIN at the top of the browser" and 'sensitive pine' work at the same time.

  Now if I choose an object and the axis 'browser', "sensitive pine" is unselected and vice versa.

  The need is for the header with the logo and menu bar to be pinned to the top of the browser, so that the page scrolls in the header bar.

  Now when I click on the sensitive left axis for the logo and the sensitive right pin for the navigation bar, the "pin at the top of the browser" gets deselected.

  Any suggestions or workarounds will be appreciated.

  Kind regards

  Vijay

  Hi all

  Thanks for that bring to our attention. We will consider adding this feature in the future.

  RyanDoyle - it's an interesting hack you have found! Unfortunately, I wouldn't count on that it works like this in the future, as a bug which is to operate. If you drag the screen to change the width of the browser as a Muse, you'll see that the behavior of the elements in the status button (a menu, for example) is different from when exported. However, if you make a small change to your hack, so it should always work: set button "width sensitive" State instead. In addition, I don't see why all parts must be in separate to this job state buttons, but I've only tried a simple example myself.

  An another workaround I used is to create another, more breakpoint. For example, if I have a menu that is pinned to the top left of the browser in the dots stop, then in a breakpoint, I would pin in the center top of the browser. Normally, I wouldn't add more breakpoints, but there is a way that I found to work around the problem. Ryan workaround is perhaps the best way to go if you take my advice and use a status button sensitive width instead of the width of the browser.

  Hope this helps,

  Anna

• Hi I would like th different creative cloud buy 2, only photoshop/lightroom one and the other with all pack.is it is possible because I saw that we can only install on 2 different computers at the same time

  Hi I would like th different creative cloud buy 2, only photoshop/lightroom one and the other with all pack.is it is possible because I saw that we can only install on 2 different computers at the same time

  Creative desktop cloud applications can be downloaded and installed on multiple computers, regardless of the operating system. However, the activation is limited to two machines per individual related to the composition, and you may not use the software on these devices simultaneously.

  You can also see:

  FAQ: Can I install Creative Cloud on several computers?

  You can either sign of Creative cloud on a computer to connect to another, or as you said, buy a membership second using an AdobeID different so that you can leave, signed at on 4 computers.

• Resizing of the images at the same time

  I have a lot of images I want to resize. The images are all rectangles and same size. I want the images to be smaller and square. Is there a quick way to do it with all the images at the same time?

  If your native images are rectangles and square, you must use the crop tool to get the defined areas. Otherwise, your images will appear distorted.  Unfortunately, batch cropping rarely works well less that all the images are perfectly framed and centered.  From my experience, cropping requires human judgment.

  That said, you can create a crop tool Preset (size & resolution) that can help further your workflow.

  Nancy O.

• Can I upgrade my membership for use with 4 computers at the same time?

  I have an Adobe membership and I use it very well on my computer

  Now, more people are joining in and I think to upgrade my membership to use it on 4 computers at the same time.

  Kindly advice if this is possible and how to do it.

  Kind regards

  Issam

  Hi Issam

  Each user must have their numbers, so they each need to register using a unique ID for Adobe.

  We also have team members that provides additional storage central license management - https://creative.adobe.com/plans

  Kind regards

  Bev

• Using insert and delete at the same time

  Good afternoon

  I want to do an insert on the table A in table B, while at the same time do a delete on table a.

  and I want to do with the procedures.

  Here is the script I came up with.

  INSERT the table_a (select * from table_b where status = was ') REMOVE from table_b where status = has '

  but I get an error ORA-00933.

  Got any ideas on how I can do this?

  Thank you

  try to:

  BEGIN

  Insert into table_b (select * from table_a where status = has ');

  remove from table_a where status = ';

  END;

  In addition, to create a procedure and see if you can only call this:

  some_procedure

  in some cases, for example (type ODBC connection)

  {call some_procedure ;}

  MK

• How can I change the font in several capacities, at the same time?

  Hey guys, quick question. I have a bunch of titles and of lower thirds in my project and my producer decided that he did not like the police that we used previously and wants to change to a new one. It seems to do quite often. Is there a way to "globally" to change the font of several title cards at the same time instead of clicking on each of them separately and do it manually for each of them? And if there is no way to do that does anyone have any ideas on how to make it easier?

  How to upgrade several titles in Premiere Pro using InDesign

• can I display different tables at the same time?

  Hi all
  
  It is probably a newbie question, but is it possible to display different tables at the same time? I use SQL Developer 1.5.5 and I seem to be unable to display several tables at the same time, whenever I chose to open another table, the old table disappears. In other words, the Bulletin Board only switches to your new choice in the table list navigation. Any ideas anyone?
  
  Kind regards
  WF

  Menu item "Tools-> Preferences-> database-> ObjectViewer Parameters"; Make sure that "automatically freeze object viewer Windows" is checked.

  HTH.

  Hrsg.:.