What is Client and Web OAuth parameters?

Similar Questions

• VMware VIew 6 (PCOIP): Windows Client and web browser connects, Android and Ubuntu - don't

  Hello colleagues!

  VMware Horizon Client 3.4.0 build-2769709

  VMware View 6.1.1 construction-2769403

  VMware vSphere 6.0.0 2776511

  That's what's wrong: used SecurityServer and connecting to the server. External connection - via a router. When it is connected to a vmware PCOIP Protocol (Internet) outside of the view with a Windows client and a web browser, it works fine. But when connecting from Android or Linux (Ubuntu 14) load the desktop does not occur. Android immediately displays the message 'connection to server lost', Ubuntu delivers all messages - I'll be back on the screen to select a pool table.

  Which connection via MS RDP connection protocol is correctly to all customers.

  In the settings ConnectionServer in PCOIP Security Gateway set up the external address of the router.

  Redirect them router ports:

  -TCP 80,443,8443,4172,32111

  -UDP 4172,32111

  Any ideas?

  In security settings server in 'URL of PCOIP' was FQDN, but it must be the IP address.

• vSphere/vCenter client and web services

  Hello

  Don't vSphere client (or client to vCenter earlier) invoke web services of vSphere internally to perform operations on the ESX Server?

  I'm new to VMware developemnt.

  As I understand it, it's the client vSphere or vCenter is a management console. An actioan/operations such as create VMS or cloning images actually occur on the ESX servers or hosts. Web services are hosted on the ESX servers. When we perform an action via client vSphere/vCenter (e.g. create the VM), internally, it would be invoking appropriate API provided by the web service SDKto do you need.

  My understanding is correct?

  If you connect to vCenter or ESX host (i) themselves by using the Client vSphere, the majority of applications using vSphere API... I say majority because I do not know there are undocumented more that VMware uses behind the scenes, but in general, it is true. If you perform an operation in vCenter and it applies to a host, vCenter will communicate this request to the host.

  If you're new to QALY/SDK: you can spend the time to enter the section "Learning" of the developer forums, there is lots of useful information here: http://communities.vmware.com/community/developer/learn

  Here's a great doc Getting Started with vSphere SDK - Update for SDK 4.1 release that has a lot of information/explanations on how it all works, you should spend time passing on it and then ask questions in the appropriate follow-up, if you need more detailed explanation.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• I get the following error message "Windows - no disk Exception processing Message c0000012 parameters 75b6bf7c 4 75b6b7c 75b6b7c" can someone tell me what this means and how get rid of? Thank you!

  I get the following "Windows - no disk Exception Message c0000013 processing error message
  Parameters 75b6bf7c 4 75b6b7c 75b6b7c"can someone tell me what this means and how get rid of? Thank you!

  * UNPLUG ALL USB DEVICES AND NON-ESSENTIAL TO THE COMPUTER

  If you can, I suggest that you try the following:

  {THE PHASE 1}

  1. click on START

  2. click on "all programs".

  3. click on "Accessories".

  4. click on "system tools."

  5. click on "system restore."

  6 follow the prompts shown to restore your system to a date before the problem started. Although the system restore does not target the personal data, it is recommended that you back up all data such as music, photos and documents in case something is not bad.

  {THE PHASE 2}

  If this does not work, I could do this:

  Reach:

  http://support.dell.com/support/downloads/format.aspx?c=us&l=en&s=gen&deviceid=308&libid=1&releaseid=R45081&vercnt=10&formatcnt=0&SystemID=DIM_PNT_P3C_4100&servicetag=&os=WW1&osl=en&catid=-1&dateid=-1&typeid=-1&formatid=-1&impid=-1

  Follow the instructions to download the version (diskette) indicated secondary. This will require a floppy disk. If you don't have one available, skip this step. Unfortunantly, given the age of this system, they do not offer executable for use within Windows automatic update.

  {THE PHASE 3}

  Reach:

  http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R42764&SystemID=DIM_PNT_P3C_4100&servicetag=&os=WW1&osl=en&deviceid=1039&devlib=0&typecnt=0&vercnt=1&catid=-1&impid=-1&formatcnt=1&libid=8&typeid=-1&dateid=-1&formatid=-1&fileid=50179

  Download the patch and install it. Then, restart your computer.

  Reach:

  http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R53986&SystemID=DIM_PNT_P3C_4100&servicetag=&os=WW1&osl=en&deviceid=1039&devlib=0&typecnt=0&vercnt=1&catid=-1&impid=-1&formatcnt=1&libid=8&typeid=-1&dateid=-1&formatid=-1&fileid=63977

  Download the patch and install it. Then, restart your computer.

  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have just downloaded and Design and Web thanks to the program that my school is running. I am trying to install programs, but when I type in the product key, it says that the key is not valid. What should I do?

  My school offers free software to his students. Adobe Design and Web Premium cs6 is one of them. I downloaded the program and when I go to enter the product code, I get an error reading "we are unable to validate this for CS6 Design and Web Premium serial number. Please contact customer support. »

  So here I am. What should I do?

  Error: "serial number is not valid for this product". Adobe Creative Suite

• I downoladed and tried to install CS6 on my computer after that machine has been upgraded to Windows 10.  I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium.  What should I do

  I downloaded and tried to install CS6 on my computer after that machine has been upgraded to Windows 10.  I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium.  What should I do to get loaded and enabled on my computer?

  That fall down, and the serial number you provide must identify the previous version that you upgraded because CS6 is an upgraded version in your case.

  Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5

  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html

• VSphere Web client and client heavy cannot connect to Vcenter server 5.5, web client fails with 2032 error before the connection, then the work after one minutes ferw.

  Hi all

  I really need help here.  I have a new installation of Esxi5.5 and installed the server vcenter build 5.5.0.5201 device 1476389.

  I have host files properly configured for DNS and Server 2008 R2 running that I use to connect with the client or web client heavy.

  Initially, I get an error with the web client to connect, he began to paint Vmware and when it comes to 'r' in the name it fails with #2032, so I can no longer

  access the page at all, he says: connection refused for the page. If I wait a while I can connect again.

  heavy client vSphere fails at this time as well.  However, I cannot communicate directly with Vsphere client to server esxi host and it works all the time.

  There seems to be a problem with the device of vcenter server because the thick client fails, and does not open a backup program using vcenter server

  inventory when this happened.

  Please help, it drives me crazy...

  Dan

  Hello

  Since I found the solution to the problem of connecting to the device of vcenter.  It is a conflict of IP address on the network.  There was a machine with the same IP address virtuall

  as the vcenter server.  This caused intermittent problems etc.. Why web client would still work if I have the vmware client open I do not know

  so thank you for your help.

  Dan

• I already bought a CS6 Design and Web Premium download. I want to install it on my new laptop, but I don't know how. I still have my series/code number produced of my purchase in December 8, 2012. What can I do to transfer my software f

  I already bought a CS6 Design and Web Premium download. I want to install it on my new laptop, but I don't know how. I still have my series/code number produced of my purchase in December 8, 2012. What can I do for my transfer software from my old computer to my new computer?

  Just install and activate it.  If you need to download the installation files, you can do so on the link below.

  Your license allows you to have two active facilities, so if you have only one, you can always install on another machine without touching the original installation.  If you do not want the original installation, then you should disable at least opening one of the applications and selecting help-> Deactivate.

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

• I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

  I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

  If you try to send or receive messages, you may receive an error message similar to the following error message, which indicates that your Post Office Protocol version 3 (POP3) or host SMTP Simple Mail Transfer Protocol () is not found:

  The host hostname is not found. Please check that you have entered the server name correctly. Account: AccountName, Server: servername, Protocol: POP3, Port: secure (SSL): no, error 11001, error 0x800CCC0D Socket number

  In addition, you cannot ping or establish a Telnet connection to the mail server.

   
  This problem may occur if you have the firewall from Zone Labs such as ZoneAla software...
  This problem may occur if you have firewall software from Zone Labs such as ZoneAlarm or ZoneAlarm Pro, installed on your computer. These programs may prevent communication with your e-mail server.

  RESOLUTION

  To resolve this problem, remove the software firewall from Zone Labs of your compu...
  To resolve this problem, remove the firewall from Zone Labs of computer software. To do this, see the program documentation or contact Zone Labs at the following of Zone Labs Web site for more information:

  http://www.zonelabs.com/services/support.htm (http://www.zonelabs.com/services/support.htm)

  MORE INFORMATION

  For more information about ZoneAlarm or to contact Zone Labs, see what follows...
  For more information about ZoneAlarm or to contact Zone Labs, see the following Web of Zone Labs Web site:

  http://www.zonelabs.com (http://www.zonelabs.com)

  For more information on how to resolve a similar error message when you use Microsoft Outlook on a computer that is configured as an ICS Internet (ICS) client, click on the number below to view the article in the Microsoft Knowledge Base:

  252322 (http://support.microsoft.com/kb/252322/EN-US/) OL2000: (CW) Error Message: The Server could not be found using ICS Connection

  For more information on how to solve an error similar to Microsoft Outlook Express and ZoneAlarm, click on the number below to view the article in the Microsoft Knowledge Base:

  274456 (http://support.microsoft.com/kb/274456/EN-US/) error finding POP3 or SMTP servers when you send or receive e-mail Messages

  The third-party products that are discussed in this article are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  later ducdive

• What happened to the Web Apps for Web marketing package?

  What happened to the Web Apps for Web marketing package? We have put in place three clients as part of this package as test sites, employing several situations where web Apps had a critical role. Then after that the option to purchase the hosting package disappears, leaving customers without the ability to edit it content apart from removing the tag of the page module.

  I think that this should be left on the Web marketing package, because not all users who might use it need ecommerce.

  Any ideas?

  Joel. Software now everywhere.

  It is not a trial mode.

  This is the phase of development of a site and the developer must know the system, what is the cost of the project, what the customer needs and which package they will use.

  Each project we and know and define what we do and outlines the packet type etc in the contract to the client.

  I have to say that if any valid partner on an issue that has not done this is wrong in my eyes. Sorry:(juste mon avis parce que si quelqu'un est la construction d'entreprises en ligne et sites Web pour les personnes dont ils ont besoin de savoir ce qu'ils font.)

  Many keys of development for SAAS offer everything what but you choose the plan, much of these days trial opens to all features for a short period of time.

  Was a case where the trial modes had limited features, but then people complain that they can't trial features they are interested.

  Regarding the packages themselves: they are not good, not well thought out on several levels and need re-doing.

• What is black and white and gray everywhere?

  I'm becoming an expert pre-press after an embarrassing error on a job that I sent to print last spring. All uppercase gray, lines and text boxes in the unable to print 12 pages newsletter. Bottom line, I sent the work to this printer from budget without conversion of RGB to CMYK, because she had been asked by the printer for the previous question.  The printer ate reprint costs about 200 information bulletins (probably because they felt they shared the responsibility for the error).  It is clear that I can't count on the directives of this printer.

  The other thing you need to know is I am Freelancer, an American working in Germany and I have no direct communication with the printer - the customer is the intermediary. I use Adobe Indesign CS4 version 6.0.6, on a MacbookPro OS x 10.6.8.  The next issue of the newsletter is now coming my way.

  The 12-page booklet is printed as follows:

  front and back cover on coated stock in 4 colours,

  inside front and back cover on coated stock in b & W,.

  and interiors 8 pages in b & W in uncoated stock.

  He had no problem printing of the previous edition, apart from the poor quality B & W photos and elements in grayscale in the inside pages. The only difference in the way I presented the second job was that I "converted" photos using layer effects in the appearance B & W, so I could better visualize how they would convert to grayscale (they stayed in the RGB color space).

  All I can conclude is that when the printer saw the photos n & B, he assumed that I had in fact everything in the inside pages converted to grayscale and therefore does not check the presence of the RGB color space. The gray text box and line items that were in RGB transformed to match the amounts of CMY, which translates to white and left the plate! I should have known that he was a risk, but I did not.

  Help me, if you understand what good practices will avoid such a mistake in the future. I have now read a lot of good resources on pre press, and I think now, I understand, but need to be reassured that I am on the right track.

  The newsletter will be printed, but will also be linked to a website for viewing online as well as distributed in a version as an attachment to e-mail low-resolution. So, I try to understand what should be my workflow.

  I should work in a RGB workflow until the client approves the work, then exit (a) using the PDF standard for offset printing CMYK to generate version to send to the printer. (b) then output another file using the PDF standard for the Web. and finally another using "smallest file size" for the distribution of electronic mail?

  In other words, if none of the color conversions must be made in native Photoshop files in InDesign, or rather they should occur during the conversion from PDF using an appropriate standard? Or do I convert in Photoshop images to use in the inside pages to grayscale images and all images to use on the front and back cover to CMYK before creating the PDF file?  This, of course, would require not make two sets of images, one for the print version and the other for display on the Web.

  Should I work with vector images and type in CMYK from the outset and keep my palette strictly in CMYK mode? Or should I work entirely in RGB and allow them to be converted to grayscale via PDF conversion?

  There is the related question of the help of the two coated vs uncoated, stock that the client wants to reduce costs. The black and white inside pages in uncoated stock gave less satisfactory results in the first two ballots. Despite my efforts to improve and clarify the pictures in Photoshop, most of the printed values much darker and less strong than the photos on the coating. The two-tone gray in the banner (vector) values have been radically different when seen by side on pages 2 and 3 and on pages 10 and 11.

  You can produce a PDF that has two modes of different output - coated stock for pages 1, 2, 11 and 12; and no coated stock for 3 to 10 pages?  This would solve the problem, or is there something more I should do with "Dot Gain" in my prepress that would solve this problem?

  Here are a few assumptions I've done so far, after gleaning information from various sources:

  1. I have put my Adobe Bridge color definition of Europe General Purpose 2 preferences for screen and print.
  2. I guess I should use a RGB workflow up to the last moment before being submitted to the printer (to maintain flexibility and activate the exit for muliple purposes, for example, print and Web versious).
  3. I should check the printer which PDF standard is compatible with its RIP and gives him more flexibility to make adjustments for its RIP so we get the best printing results.
  4. Should I choose a profile to control upstream, such as the VIGC Live Preflight profiles (Ghent PDF Workgroup) to identify any potential problems of conformity with space color, transparency, text in excess, bad fonts, cropping, etc. before conversion to PDF.

  Any advice you could offer would be appreciated.

  Hi Peter, my biggest frustration is I can't communicate with the printer - there is remote, no time to talk with clients and speaks German. All I can think to do is inform how professionally prepare the files, and then write (and translated) a note describing what I did as well as possible. At least I will have done my "due diligence" and if there are problems with the work, the responsibility will be on him, if he didn't read the memo, or ask me to fix everything that does not work for its workflow. I will be certainly work in two files, one for one (K only) for uncoated and coated.

  Peter Spier says:

  Said what Rob is OK, but I think in this case, given that the work, I think, goes on press and print on two different stocks, would probably prepare files for color on coated stock and the K-only on non-coated, but ask to the printer. Questions about the way they really want to receive your material to address them.

• I just using Thunderbird as my email client and I cannot log into my email

  I just started using mozilla thunderbird as my email client and I was able to sign into my gmail account, but when I tried to connect to my school email I got an error that says "Thunderbird cannot find the value of the email from your account. And now do not know what to do.

  Thank you very much, it worked.

• What happened to my web content caching?

  What happened to my web content caching? Nothing there. Impossible to erase it.

  In case you use "clear history of Firefox closing:

  • do not delete the 'Cache' because Firefox will disable the cache disk in this case
  • Tools > Options > Privacy: history: [X] clear history of Firefox closing > settings
  • https://support.Mozilla.org/KB/clear+recent+history

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, windows pop up, installation of software and passwords.

• How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Active Sync iPad ssl Client certificate

  How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Hi Ewoki,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the TechNet Exchange forum. Please post your question in the Forums TechNet in Exchange Server.

• I get a box with internet script error explore - google.search error ' customSearchControl is null or not an object - code o - what is it and how do I fix?

  I get a box when get on google home page - script error Internet explorer

  CAR1

  Google error

  'customSearchControl' is null or not an object

  Code0

  What it means and how to fix it?

  You might want to think twice before you reset your unspecified version of IE...

  This from Microsoft KB923737:

  When you reset Internet Explorer settings, all modules and customizations are removed, and basically, you start with a new version of Internet Explorer.

  The feature reset the Internet Explorer settings restores the following elements to their default settings:

  • Home pages
  • Search scopes
  • Browsing history
  • Form data
  • Passwords
  • Appearance settings
  • Toolbars
  • ActiveX controls

  In addition, the feature reset the settings of Internet Explorer disables all add-ins.

  This is what will happen if you choose to reset your IE - what do you want?

  If you receive script debugging messages, which usually means that IE is not happy with the web page, because the web page has some mistakes in there, then you may want see if this article applies to you instead of just beating a first all your Internet Explorer settings:

  http://support.Microsoft.com/kb/822521