What is e-Print Center during the interview?
What is maintenance eprintcenter forever?
When ePrint or ePrintCenter is undergoing maintenance, there could be several reasons. Sometimes, this means that they update the servers and sometimes they change the site of ePrint. ePrint develops very rapidly and new servers must be added or modified to account for the growing number of customers who use the service.
Tags: HP Printers
Similar Questions
-
How can I send a print job on printer outside during the phone app?
How can I send a print job on printer outside during the phone app?
banhien is to give you good information, but it is a bit incomplete. You will be able to use the House ePrint and Biz app to print remotely from your android device, but you will need to install ePrint and ePrint Center first account. You can find more information about how to configure and use ePrint here. Once you have done so, you need to add the new e-mail address of your printer in the app. Once you have all that done, then you will be able to use the remote app. I hope this helps.
-
Hi all
We cloned an Oracle EBS R12.2.2 instance and it worked very well for us. To increase the RAM of the newly created virtual computer, we did the virtual machine down. Once the RAM has increased, we started all the services (without error), including level of DB and Application layer. But when we try to access the application of EBS get the following error:
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The system has encountered an error during the interview of the application. If the error persists, contact the system administrator.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Then I checked all the services, they are running.
Log file: / u01/applmgr/SCREWS/fs_ne/inst/VIS_ebsr72/logs/appl/conc/log
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Process of shell VIS_0402@VIS Manager internal simultaneous departure - ID 6095
logfile=/U01/applmgr/vis/fs_ne/inst/VIS_ebsr72/logs/appl/conc/log/VIS_0402.Mgr
PRINTER = noprint
mailto = applmgr
Restart = N
diag = N
sleep = 30
PMON = 4
quesiz = 1
Reviver is ENABLED
CP-SYSTEM ADMIN RESP. internal MISSINGThe competitor Manager encountered an error.
Check the simultaneous log manager for more information. : APRIL 2, 2014 14:21:59 -
Shut down the internal concurrent Manager: April 2, 2014 14:21:59
List of errors encountered:
.............................................................................
_ 1 _
Systematic AFPCSQ can't nec USER_ID value of the profile option. ORACLE
error 1403 in get_responsibility_data
Cause: get_responsibility_data
has failed because of the ORA-01403: no data found.
The SQL statement being executed at the time of the error was: and
a exe
.............................................................................
APP-FND-01388: cannot read the value for option profile SQL_TRACE in routine and ROUTINE.
List of errors encountered:
.............................................................................
_ 1 _
Routine AFPCAL has received the code of failure while running or analysis of your
simultaneous program CPMGR
Examine your log file of concurrent application for more information.
Make sure that you pass arguments in the correct format.
.............................................................................
The internal concurrent Manager VIS_0402@VIS ended with the State 1 - abandon.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note: Before you restart the virtual machine it worked great. It has not changed anything except the RAM to the virtual machine. After the start, we get error.
I need your help. Please suggest me.
Thank you
Prabhakar
Hi all
Thank you for your support. I solved the problem. Find the info below.
===================================================================================================
Question: Like I said existing VM is cloned VM. Then after we had changed the host name. I checked the database alert log file:
Before the reboot: name of the node was the previous still node name VM that it functioned very well. (for ex: xyz.domain)
After the reboot: name of the node is replaced by the new host name. (for ex: abc.domain)
Once the name of the node is changed he started creating problem in starting the application services.
One last thing, I want to mention here after hostname change, approval of new contextfile has 700, but it should be 755.
Solution: I followed these steps.
(1) stop all services on the LAYERS of the DB and APP
(2) change the new contextfile permission if not 755 and the .env at the level of the source DB
(3) cd $ORACLE_HOME/appsutil/bin and run as: perl adgentns.pl appspass = apps contextfile = $CONTEXT_FILE - removeserver
(4) change the name from old host to the new host name, so find in contextfile.
(5) start listener, then the database
(6) listener status, it must must give service to the db instance
(7) perform autoconfig with new contextfile (DB Tier)
(8) perform autoconfig (pane APP)
(9) start all services
======================================================================================================
It works for me, and now the application is running. I hope that it will also work for others.
Thank you
Prabhakar
-
PES 9 - unique printing center of the image
Hi - I'm having a problem with printing some JPEGs in PSE 9. I actually try to use a virtual "printer" pdf to convert a jpeg file to the pdf format (I'm trying to finally merge multiple JPEG files in a final pdf file if I want to convert JPEG files and use a third-party software to perform the merge). The jpeg format, I am trying to convert is larger (size wise) so I resized it so that it develops on a normal paper. However, when I go to 'print', only the center of the image is printed, despite the fact that the preview seems perfect and "Crop to fit" is not checked. Any ideas? Thank you!
Specify the correct paper size in the print dialog box? Otherwise, I don't know about the problem of sizing.
You don't have to print to a virtual printer to get a .pdf file. You can use Save as... and select PDF.
Jürgen
-
What happened to print preview and the ability to choose what you want to print?
I tried all the suggestions and still no preview before printing.
This also occurs if you use the elements to print in the file menu?
- Press the ALT key, or press F10 to display the Menu bar.
Nothing open at all?
Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.
- Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
- Do NOT click on the reset button on the startup window Mode safe
-
What does code 10 average during the installation of the speakers:
I installed my stereo speakers to a desktop computer. No problem to do that, BUT then I get a message the speakers cannot "start" because of code 10.
What is the 10 code and how do I do now? Thank you.Hello
I suggest you go through the following link.Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104You can also refer to:
A code 10 error occurs in Device Manager when you restart a Windows XP-based computer that is connected to an external 1394 device
http://support.Microsoft.com/kb/894480 -
Good Questions during the interview of s/n
What is the advantage of the RMAN utility?
How RMAN improves backup times?
Can you take offline with RMAN backups?
How do you see information about the RMAN backups?
What is a catalog of recovery?
You need to place the Recovery Catalog in the same DB?
You can use RMAN without a recovery catalog?
You can take the picture with RMAN backups?
You can use Backupsets created by RMAN with any other utility?
How can you see how many segments of memory are acquired by the Oracle Instances?
How can you see what segment belongs to which instances of database?
This bottleneck you will find by VMSTAT and IOSTAT? What news column is useful?
How do you define the parameters of the kernel in Red Hat Linux, AIX and Solaris?
How to remove the chunks of memory?
What is the difference between the symbolic link and hard link?
What is stored in the oratab file?
How can you see how many processes are running under Unix?
How can you kill a process in Unix?
You can change the priority of a process in Unix?
Default database roles are created when you create a database?
What is a control point?
What process reads the data from the data files?
Which process writes data to the data files?
Can you do a CanGrow Datafile. If so, how?
What is a shared pool?
What is kept in the database buffer Cache?
Maximum how many redo Logfiles may have a database?
What is the difference between PFile and SPFile?
What is the PGA_AGGREGRATE_TARGET parameter?
Any other suggestions?
Published by: WhyNotOracle on February 3, 2010 23:09John Hallas wrote:
In fact for a very junior position I don't think they are too bad a series of questions. They test the basic oracle and unix skills.However, I prefer to enter into a discussion with a candidate by starting a very simple as question "what is the difference between logical and physical forward. Once it is answered you may ask why do you use logic, when using DG, which is DG broker, how do you build a standby, all according to the depths you want to enter. How the candidate's responses take you different paths.
Another favorite of mine is "what does 11 GR 1 material (or R2 now) you are interested in must" even if they have not used 11G I expect to have some opinion on what is and to come.
As I say, simple questions that you can take as deep you want to go based on the strength of the candidate.
www.jhdba.WordPress.com
Agree. It's pool question seems more appropriate to JuniorDBA. I guess that WhyNotOracle drawings for their management or simple filtering.
-
What files can I delete during the disk cleanup?
Cleaning disc in Windows 7 wonder tick boxes to indicate which files I want deleted. I want all the boxes or is there some files I need to keep?
All about disk cleanup...-Mike Hall MVP Windows: consumer http://msmvps.com/blogs/mikehall/ Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/ -
Printer e-all-in-one printer 7520 printer turns off during the night
My printer was initially set up to automatically print multiple daily crossword. It has worked well for more than a month. Now the printer stops during the night, and I have to unplug the device and plug it in again so he can print the puzzles.
Hello DonIriving,
Welcome to the HP Support forums. I understand that your Photosmart 7520 stops during the night.
I've included the document the printer turns off unexpectedly after being inactive for a period of timetroubleshooting. It will guide you in how to correct this problem.
-
HP LaserJet Enterprise 600 m602 slow printing during the passage of the trays
Hello world!
On the HP LaserJet Enterprise 600 m602, who met breaks in print jobs during the passage of the trays? Example, we are going to print invoices and we have a rule configuration that prints on plate 2 with the exception of the last page that is perforated paper tray 3. So, in a job of 5 pages, pages 1-4 are the tray 2 paper... then page 5 is perforated tray 3. There is a 2 to 3 seconds when the last page is extracted from tray 3. If the invoice is only 2 pages, the print job appears super slow.
This printer was working fine with no delay until we applied the firmware 2302786_433718. Now, the delay is very noticeable. We do not know if it was intentional or not in the new firmware.
We use the latest PCL 5 Universal Print Driver. The only thing that has changed is the firmware. We even tried a full reset of firmware. Problem is still there.
I worked with HP support, but we were told to wait... the next version of firmware that may or may not fix everything.
Any help or insight is appreciated.
We have this same problem with our printer HP Laserjet 600 M602.
Could solve by setting the Print Mode to all papertypes that are used for the same parameter. We thought initially can be a problem, issue or firmware of the Board of adjustment, but in reality was the paper type settings. We set up printer for ordinary paper into tray 2 and tray 3, default regular bond has been set at light mode printing and binding for the print mode binding. Each time dial-up printer and trays, he stops to configure different paper type settings.
Hopefully the other help solve their printing problems
Enjoy your day,
-
you forgot to enter the printer code during installation
Impossible to enter the printer code during the installation steps. How can I do now?
Hello
The printer, go to settings, open the Tools menu and select Restore Factory Defaults. Click OK to confirm.
Now click on the ePrint button, select Enable ePrint and wait several minutes, a new certificate claim code will be printed.
Enter the connected HP site and add the printer using the newly created application code and follow the instructions on the screen.
Kind regards
Shlomi
-
Alignment Page HP PSC1315 prints every time the printer is turned on
It's VERY frustrating. After installing a printer driver updated to my new Win7 system and installation new black ink cartridge in the printer dang prints the alignment Page, whenever I turn it on! I have "lined up" it several times and yet HP insists to waste my (money for waste of ink and paper) green, even though I followed the software and the instructions on the page to test several times! Help! It is rather ironic, given my brand new printing software (wow that download was enormous: no doubt inflate more software) has a button how to be green at the top right!
I've been a supporter of long standing of HP that buying the products of your printer for many years, but unless this is resolved soon, I'll go out and spend double what price this printer and return the money to your Kumite. This is intolerable! I do not think that your software help consider even this oversight, oh, but I see that I can click on a convenient button HP purchase! Furthermore, I'm not some neophyte with computers, I built this pc and many others before it.
signed... Frustrated!
Hello
Have you tried that?
1 turn the printer off and wait ten seconds. Turn it back on.
2. let the printer print test page.
3. when the test page prints, unplug the USB cable that connects to the printer to your computer. Not turn off the printer and unplug the cable.
4. place the test page to the glass of the scanner and press the SCAN button on the printer control panel. The indicator light flashes while the page is being analyzed.
5 remove the test page when the indicator light stops flashing.
6. turn the printer off and wait another ten seconds. Now you can turn it back on it.
It is no longer printing test pages?
Now, you can reconnect the USB between PC and the printer cable.
Please post your results.
Kind regards
ERICO -
How to stop the hibernation during the night?
I have a HP Pavilion Slimline desktop computer model s5380i. It goes into what I call a 'sleep' during the night, a result which my AutoSave does not work. How to prevent from hibernation, or place it so the automatic backup will work. The reader who wants to save is a Toshiba and I use the backup software provided with the drive.
Hello
Suggestion for Microsoft
I hope this helps.
-
HP series 3510 icon on the desktop does not open print Center
Just create new pc with Windows 7. Reinstalled HP series 3510 printer and desktop icon appears, but do not open the ink levels showing Print Center and printing/scanning options. I went to devices and printers in Control Center and click with the right button on the printer that created a Telechareger icon, but I can not yet open print center which is what I see when I click on the icon. Any suggestions? Thank you.
Thanks again for this information.
Given that you receive a message indicating the file Deskjet 3510 in the bin folder is missing. I would recommend uninstalling this software. I would like to use this tool, called Microsoft Fixez_ the on issues that programs cannot be installed or uninstalled. This will fix:
-
It worked during the initial installation. then I made an attempt to all our computers on network. set, I couldn't print. everything, or attempts to go to the printer, but it is still in print printers failed file.
I ping the computer, and my proxy failed. I think that's the problem, but I can't solve this problem as well.
Thank you
Hi coxalabama,
1 are computers connected to any domain or server?
2. What is the exact error message only when the printer is unable to print?
If the computers are not connected to the domain, you can follow this link & check if the problem persists.
Printer in Windows problemsHope the helps of information.
Please post back and we do know.
Maybe you are looking for
-
When you try to open a link in an email I get the following message: this operation has been cancelled due to restrictions in effect on this computer. Please contact system administrator. "This is a home PC so I guess I am the administrator and I don
-
I have three sound devices: my soundblaster PCI motherboard built in audio (realtek HD audio), and my graphics Nvidia card (via HDMI). I installed the drivers for the soundblaster and graphics card. I tried allowing both at the time and only one at a
-
Windows/system32/config/config
my computer keeps telling me that I have to put my Boot cd Windows fix the computer I can't find the cd how can I get another
-
How to fix an exunecekiriyi.dll "lack the module?"
I have a Windows 7 computer with an earlier version of Microsoft Office downloaded on it. After 2 months of use without error, I now suddenly get the following message at startup: "there was a problem starting C:/Users/Joysa/AppData/Local/exunecekiri
-
0xc00000a5 start error with Google Chrome.
Hey,. I have the Google Chrome error does not start, but only when I click a link to open it upwards, as when I connect to Windows Live Messenger and Windows Live today new links, whenever I click on these types of links, when Google Chrome is not al