What is error code--c:\windows\ipajahoz.dll

Similar Questions

• What does error loading c:\WINDOWS\dxdmvin.dll the specified module could not be found

  Whenever I turn on my computer I get this error code

  Hello

  ·          When the issue started?

  ·          What version of the operating system is installed on the computer?

  C:\windows\system32\dxdiagn.dll problems result in one way or another by a problem with Microsoft DirectX.

  Method 1:

  If you use Windows 7, and then run the DirectX Diagnostic tool.

  Refer to: http://windows.microsoft.com/en-US/windows7/Diagnosing-basic-problems-with-DirectX

  http://Windows.Microsoft.com/en-us/Windows7/DirectX-frequently-asked-questions

• Error Code c:\windows\atijasuqeb.dll

  How can I get rid of the error code that is displayed while booting?

  This file was probably part of a virus or spyware infection that has been partially removed. Run a full scan for virus/spyware.  If the problem persists, use the free Windows Sysinternals Autoruns tool to find and remove the reference to the file.

  For more information about how to use the Autoruns, please see:

  Autoruns for Windows Windows Sysinternals Autoruns Forum

  Boulder computer Maven
  Most Microsoft Valuable Professional

• What is error code 643 Windows Vista? / (cannot install updates)

  I continue to have problems with updates. The last error code is 643.  I am running Windows Vista on a Toshiba laptop.  L305D 5900
  Help, please!  Thank you!

  Error code Windows Update '0 x 643' Windows Installer error code "1603" are generic error codes. As a general rule, these error codes mean that the update was not installed. These error codes are usually caused by a corruption in the installation of .NET Framework or by an inconsistency on the MSI database state.

  To do this, follow these steps:

  1. Click on the following link to download the .NET Framework cleanup tool:
     http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx (http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx)
  2. Use the .NET Framework Cleanup to uninstall version .NET Framework 1.0, 1.1, 2.0, 3.0 and 3.5
     Note The cleaning tool does not remove the .NET Framework 2.0 in Windows Vista or later versions, because the .NET Framework is installed as a component of the operating system.
  3. Restart the computer.
  4. Download and install the following components:
     • .NET framework 1.1
       http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=262d25e3-f589-4842-8157-034d1e7cf3a3 (http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=262d25e3-f589-4842-8157-034d1e7cf3a3)
     • .NET framework 1.1 SP1
       http://www.Microsoft.com/downloads/details.aspx?FamilyId=A8F5654F-088E-40b2-bbdb-A83353618B38&displaylang=en (http://www.microsoft.com/downloads/details.aspx?familyid=A8F5654F-088E-40B2-BBDB-A83353618B38&displaylang=en)
     • .NET framework 3.5 SP1
       Note This will also install .net Framework 2.0 SP2 and the .net Framework 3.0 SP2
       http://www.Microsoft.com/downloads/details.aspx?FamilyId=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en (http://www.microsoft.com/downloads/details.aspx?familyid=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en)
  5. Restart the computer.
  6. Visit the Windows Update Web site and install the updates

  It may be useful

  Good luck

• Error loading C:\windows\iambcex.dll error codes

  Original title: error codes
  On my pc, I have not been able to obtain the nywhere.  When I open windows I get two error messages:
  Error loading C:\windows\iambcex.dll
  Error loading C:\windows\iyigexindoduse.dll

  A google search produces no results. This suggests that the relics of an incompletely removed malware or malicious software.

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/products/malwarebytes_free
  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  To identify what loads when you start using Autoruns (freeware from Microsoft).
  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.
  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• What is this error? Error loading c:windows\mcycol40.dll the specified module could not be found

  Windows XP is giving the following error message and there is NOTHING to be found anywhere on this subject.  Help

  RUNDLL

  Error loading c:windows\mcycol40.dll

  the specified module could not be found.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you can't find a good explanation for the name of the file in a Google search, re chances while your system is currently or has been infected with malicious software.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• When I restart my computer, I get this message error loading C:\windows\pxtdmap.dll, what should I do?

  Error loading C:\windows\pxtdmap.dll, what should I do?

  Hi Nancy,.

  The error message says anything else? Just, based on

  "C:\windows\pxtdmap.dll", I am unable to find a possible solution.

  The error message contains more information or could look you in your system event viewer to see if there is a more detailed error message there?
  http://support.Microsoft.com/kb/308427
  It would also be possible to use the system restore utility to restore your computer to a time where you did not receive this error?
  http://support.Microsoft.com/kb/306084

• Windows XP starts, an error message appears. 'RUNDLL error loading C:\Windows\ihukuqej.dll'. The module specific cound not be found.

  Original title: Windows Rundll error on startup

  My laptop, Windows XP startup, an error message appears. RUNDLL error loading C:\Windows\ihukuqej.dll.  The module specific cound not be found.  I downloaded ParetoLogic PC Health, did a full scan on the registry and fixed all of them, rebooted and its still there.

  What is a rundll error?

  File rundll.exe are processes systems directly connected to your computer Windows registry. All of the Dll files are a part of the vast library that contains code and data that are shared by many programs. This allows to obtain the effectiveness of speed and memory of your operating system by reusing the same code or file to run many functions of various programs. An error occurs when the program are not allowed to access this code.

  Why do you Rundll errors?

  Windows uses rundll files to load programs, files, and applications. If the dll file is missing or damaged, any application using this file cannot be loaded. This will produce a rundll error. The reason why the file has disappeared is often related to a virus or spyware. This type of malware often tries to divert the files shared by the rundll file. Other sharing programs file then do not work effectively or to load any.

  STEP 1: IDENTIFY

  The first thing you need to do is to identify the process specific rundll. This isn't a difficult task; There is a library online extensive process in which you can assess the validity of the process that is running. When the error dialog box opens, it displays the name of the process. For example, if the dialog box appears and tells you the dll error:

  STEP 2: STOP THE PROCESS

  Often, you can locate the Dll of enforcement in the services of the exe. You can open your services configuration by following the instructions below:
  1. open your Start menu.
  2. click on run
  3. in the command screen type:services.msc
  4. This will bring to the top of the window Management of the Services . If you drag the mouse to one of the services. It will give you a detailed explanation of the service in question. By right-clicking the individual service.
  5.stop the "dll" service immediately.

  NOTE: sometimes the dll process can not be stopped by this method.

  

  STEP 3: CHECK FOR AND REMOVE

  You need to open your Windows registry file system. It is an extremely delicate process. The registry key: HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  This action will help you speed up the considerable load time of your applications. Here's how:

  1. click on Start
  2. click on run
  3. type regedit
  4. find this registry key:
  HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  5. in the right section click on: "rusvdgpo" = "%System%undll32.exe % System%usvdgpo.dll, [RANDOM LETTERS].
  6. delete the value and reboot.

  

  SPECIAL REMARKS

  Rundll.exe is a critical system process. However, there a great vulnerability is back, which makes it more prone to malicious purposes by an attacker allowing access to your computer from remote locations, stealing passwords, personal data and Internet banking.

  The Trojans are usually use this attack method to share a process that invites the other malware be more Trojan horses or other forms of spyware. The best defense is to keep your security up-to-date software and explain the process of rundll on your computer.

  ======================

  More information is a lot to explain and resolve the problem.

  Since it is a painful process for beginners, it is best to create a new user account and remove the error causing the user account.

  Because not only it solves problems, there will be new user settings and the program files needed for the user account.

  Once you are in the new user account, you can scan by using a program that synchronize with the server and check for virus/malware/spyware.

  Here is the link.

  Run hitman pro 3.5

  http://www.SurfRight.nl/en/downloads

• Error code coming 1097 in DLL call

  Hello

  I get the error code 1097 in the DLL function call. Please find the DLL by calling the function for more information.

  Function: GetControllerListTest (Controller * ptrControllertest, char * max_controller);

   

  Parameter Controllertest details:

  set NO_OF_CONTROLLER 100
  #ifndef CONTROLLER_STRUCT
  typedef struct
  {
  CString name;
  status of tank;
  CString blocked_by;
  Char group;
  } controller;

   

  Data type for the parameter Controllertest is structure. In LabVIEW, I configured the parameter as a cluster.

  name: line control

  status: complete control U8

  blocked_by: control string

  Group: entire control U8

  Could you please confirm it, did I set up the type of data in a correct way?

  I'm getting output empty table and the error Code of the DLL 1097. Can you please tell me where I am missing?

  Thank you

  Sivaramkumar.V

  What type "CString" defined?

  If it's a C++ type, as defined here, then you can not call this function directly from LabVIEW because LabVIEW can not pass of C++ types.  In this case, you will need to write a wrapper (in Visual Studio or another C++ programming environment) which takes a string (character array) standard C as an input, creates a CString from her and calls GetControllerListTest.

  If CString is defined as a fixed-length character array, then you need to replace the strings of LabVIEW with clusters of U8 containing a number of elements equal to the string length (LabVIEW does not support arrays of fixed length).

  If CString is defined as a pointer to a character array, you can pass the data to LabVIEW, but you must call the memory manager of LabVIEW functions to allocate memory for the string data and copy it.

• Error code: 80070490 (Windows is unable to check the updates)

  I get the error code 80070490 (windows is unable to check the updates) I did a system restore, full scan, virus, malware, rootkit, adware and spy ware.  Downloaded and installed the suggested fix for this issue on the microsoft site.  Nothing seems to help.  Any suggestions?

  Hello Pstrjohn,

  Thank you for your message.  You can also click HERE for more information about the Windows Update error Code: 80070490.

  See you soon

  Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• Whenever I reboot I get the following message: error loading C:\windows\claprv.dll

  Whenever I reboot I get the following message:

  Error loading C:\windows\claprv.dll

  the specified module could not be found

  What does that mean?  The only thing that I found online, it is that it can be associated with some malware?

  Any ideas?

  Hello, Rojo97,

  You have something to do with skiing?  This site uses claprv.htm.  You will get a 404 error page not found but the site is active.

  http://www.Sloski.SI/resources/files/PDF/alpsko-smucanje/04-05/FIS/alp_claprv.htm

  Have you added new software to your system recently?

  Download Microsoft malicious software removal tool run a complete analysis

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

• What does error Code 0x80072efd HRESULT and how to fix it?

  What does error Code 0x80072efd HRESULT and how to fix it?

  If this error occurs during the update of Windows, see here: http://support.microsoft.com/kb/836941. (0X80072EFD - ERROR_INTERNET_CANNOT_CONNECT). "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• Error Code 80070005 windows vista

  I know this has been asked before but I got the error code 80070005 Windows update, what is the solution for this error and y at - it a tool that I can use easily which fixes this problem.

  Choose one or two

  + site: microsoft.com & rn = Windows + Update + Forum http://social.answers.Microsoft.com/Search/en-US/?Query=80070005&RQ=meta:Search.MSForums.forumid (f713b70a-5915-4a57-af67-a2252a86a8f1)

• The error code is 'Windows Update error 80072ee2'. SO how to fix in a step-by-step fashion. I added the site proposed for the update in my antivirus while list.

  The error code is 'Windows Update error 80072ee2'. SO how to fix in a step-by-step fashion. I added the site proposed for the update in my antivirus while list.

  Hi Sarma_RN,

  1. When you receive the error message?

  2. update you are trying to install?

  3. When was the last time you were able to install updates?

  If Windows Update, error 80072ee2 during updates, the Windows Update servers may experience an unusually high number of requests for updates. Close Windows Update, wait 10 to 15 minutes, and then run Windows Update again. Alternatively, you can wait for automatic update of Windows run at its next scheduled time.

  These errors can occur caused by one of the following problems:

  • Applications or processes that interfere with Internet communications
  • Problems on your computer
  • Strong Internet activity
  • Recoverable database errors

  See the Microsoft article and try the steps mentioned below.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/836941

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• error code 80080005 'Windows could not search for new updates"

  error code 80080005 'Windows could not search for new updates"

  What operating system?

  http://support.Microsoft.com/kb/910337
  This error message is similar to the error message "error 5: access is denied." To resolve this problem, follow the steps described in the section "error 5: access is denied."

  This error indicates that access for FOREST permissions have been modified. To repair these access permissions, use one of the following methods, depending on the operating system.

  Windows XP

  1. Click Start, click run, type cmd, and then click OK.
  2. Type the following command and press ENTER:
     SC tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  3. Click Start, click run, type services.msc and click OK.
  4. Double-click on Background Intelligent Transfer Service.
  5. On the general tab, click Start.

  TaurArian [MVP] 2005-2010 - Update Services